All Stories

  1. Fabrication of Ti from a blend of Ti and TiH2 powders via powder metallurgy processing

    Article • Materials and Manufacturing Processes, September 2019, Taylor & Francis

    Dr Sanjay kumar vajpai

  2. Structure and magnetic properties of Co 2 (Cr 1−x Fe x )Al, (0 ≤ x ≤ 1) Heusler alloys prepared by mechanical alloying

    Article • Journal of Magnetism and Magnetic Materials, July 2017, Elsevier

    Dr Sanjay kumar vajpai

  3. Wear Behavior of Harmonic Structured 304L Stainless Steel

    Article • Journal of Materials Engineering and Performance, May 2017, Springer Science + Business Media

    Dr Sanjay kumar vajpai

  4. Effect of Particle Size Distribution on SiC Ceramic Sinterability

    Article • Journal of the Japan Society of Powder and Powder Metallurgy, January 2017, Japan Society of Powder and Powder Metallurgy

    Dr Sanjay kumar vajpai

  5. Microstructure Evolution and Deformation Mechanisms of Harmonic Structure Designed Materials

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Sanjay kumar vajpai

  6. High Temperature Mechanical Properties of Harmonic Structure Designed SUS304L Austenitic Stainless Steel

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Sanjay kumar vajpai

  7. Microstructure Formation of High Pressure Torsion Processed (α + γ) Two Phase Stainless Steel

    Article • Materials Science Forum, November 2016, Trans Tech Publications

    Dr Sanjay kumar vajpai

  8. Effect of Harmonic Microstructure on the Corrosion Behavior of SUS304L Austenitic Stainless Steel

    Article • Metallurgical and Materials Transactions A, October 2016, Springer Science + Business Media

    Dr Sanjay kumar vajpai

  9. Preparation of strong and ductile pure titanium via two-step rapid sintering of TiH 2 powder

    Article • Journal of Alloys and Compounds, October 2016, Elsevier

    Dr Sanjay kumar vajpai

  10. Three-dimensionally gradient harmonic structure design: an integrated approach for high performance structural materials

    Article • Materials Research Letters, August 2016, Taylor & Francis

    Dr Sanjay kumar vajpai

  11. Effect of bimodal harmonic structure design on the deformation behaviour and mechanical properties of Co-Cr-Mo alloy

    Article • Materials Science and Engineering C, January 2016, Elsevier

    Dr Sanjay kumar vajpai

  12. Application of Al-Si Semi-Solid Reaction for Fabricating Harmonic Structured Al Based Alloy

    Article • MATERIALS TRANSACTIONS, January 2016, Japan Institute of Metals

    Dr Sanjay kumar vajpai

  13. Bulk Ni–W alloys with a composite-like microstructure processed by spark plasma sintering: Microstructure and mechanical properties

    Article • Materials & Design, January 2016, Elsevier

    Dr Sanjay kumar vajpai

  14. Synthesis of Ternary Ti-25Nb-11Sn Alloy by Powder Metallurgy Route Using Titanium Hydride Powder

    Article • MATERIALS TRANSACTIONS, January 2016, Japan Institute of Metals

    Dr Sanjay kumar vajpai

  15. Three-Dimensionally Gradient and Periodic Harmonic Structure for High Performance Advanced Structural Materials

    Article • MATERIALS TRANSACTIONS, January 2016, Japan Institute of Metals

    Dr Sanjay kumar vajpai

  16. Microstructure and properties of beta Ti–Nb alloy prepared by powder metallurgy route using titanium hydride powder

    Article • Journal of Alloys and Compounds, January 2016, Elsevier

    Dr Sanjay kumar vajpai

  17. Effect of Particle Size Distribution on SiC Ceramic Sinterability

    Article • MATERIALS TRANSACTIONS, January 2015, Japan Institute of Metals

    Dr Sanjay kumar vajpai

  18. Application of High Pressure Gas Jet Mill Process to Fabricate High Performance Harmonic Structure Designed Pure Titanium

    Article • MATERIALS TRANSACTIONS, January 2015, Japan Institute of Metals

    Dr Sanjay kumar vajpai

  19. The Development of High Performance Ti-6Al-4V Alloy via a Unique Microstructural Design with Bimodal Grain Size Distribution

    Article • Metallurgical and Materials Transactions A, November 2014, Springer Science + Business Media

    Dr Sanjay kumar vajpai

  20. Importance of Bimodal Structure Topology in the Control of Mechanical Properties of a Stainless Steel

    Article • Advanced Engineering Materials, September 2014, Wiley

    Dr Sanjay kumar vajpai

  21. Harmonic structure formation and deformation behavior in a (α + γ) two phase stainless steel

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Dr Sanjay kumar vajpai

  22. High performance Ti-6Al-4V alloy by creation of harmonic structure design

    Article • IOP Conference Series Materials Science and Engineering, August 2014, Institute of Physics Publishing

    Dr Sanjay kumar vajpai

  23. Harmonic Structure Design of Co-Cr-Mo Alloy with Outstanding Mechanical Properties

    Article • Advanced Materials Research, May 2014, Trans Tech Publications

    Dr Sanjay kumar vajpai

  24. Improvement of mechanical properties in SUS304L steel through the control of bimodal microstructure characteristics

    Article • Materials Science and Engineering A, March 2014, Elsevier

    Dr Sanjay kumar vajpai

  25. Fabrication of multilayered Ti–Al intermetallics by spark plasma sintering

    Article • Journal of Alloys and Compounds, February 2014, Elsevier

    Dr Sanjay kumar vajpai

  26. Application of Harmonic Structure Design to Biomedical Co–Cr–Mo Alloy for Improved Mechanical Properties

    Article • MATERIALS TRANSACTIONS, January 2014, Japan Institute of Metals

    Dr Sanjay kumar vajpai

  27. Fabrication of Yttria Stabilized Zirconia-Silicon Carbide Composites with High Strength and High Toughness by Spark Plasma Sintering of Mechanically Milled Powders

    Article • MATERIALS TRANSACTIONS, January 2014, Japan Institute of Metals

    Dr Sanjay kumar vajpai

  28. A novel powder metallurgy processing approach to prepare fine-grained Ti-rich TiAl-based alloys from pre-alloyed powders

    Article • Intermetallics, November 2013, Elsevier

    Dr Sanjay kumar vajpai

  29. Application of rapid solidification powder metallurgy processing to prepare Cu–Al–Ni high temperature shape memory alloy strips with high strength and high ductility

    Article • Materials Science and Engineering A, May 2013, Elsevier

    Dr Sanjay kumar vajpai

  30. Synthesis and characterisation of Cu–W nanocomposite strips

    Article • Materials Science and Technology, March 2013, Taylor & Francis

    Dr Sanjay kumar vajpai

  31. A Novel Powder Metallurgy Processing Approach to Prepare Fine-Grained Cu-Al-Ni Shape-Memory Alloy Strips from Elemental Powders

    Article • Metallurgical and Materials Transactions A, February 2012, Springer Science + Business Media

    Dr Sanjay kumar vajpai

  32. Synthesis and properties of Cu–Al–Ni shape memory alloy strips prepared via hot densification rolling of powder preforms

    Article • Powder Metallurgy, December 2011, Taylor & Francis

    Professor Ravindra K. Dube, Dr Sanjay kumar vajpai

  33. Microstructure and properties of Cu–Al–Ni shape memory alloy strips prepared via hot densification rolling of argon atomized powder preforms

    Article • Materials Science and Engineering A, November 2011, Elsevier

    Dr Sanjay kumar vajpai

  34. Processing and Characterization of Cu-Al-Ni Shape Memory Alloy Strips Prepared from Prealloyed Powder by Hot Densification Rolling of Powder Preforms

    Article • Metallurgical and Materials Transactions A, May 2011, Springer Science + Business Media

    Dr Sanjay kumar vajpai

  35. Processing and Characterization of Cu-Al-Ni Shape Memory Alloy Strips Prepared from Elemental Powders via a Novel Powder Metallurgy Route

    Article • Metallurgical and Materials Transactions A, July 2010, Springer Science + Business Media

    Dr Sanjay kumar vajpai

  36. Studies on the mechanism of the structural evolution in Cu–Al–Ni elemental powder mixture during high energy ball milling

    Article • Journal of Materials Science, August 2009, Springer Science + Business Media

    Dr Sanjay kumar vajpai

  37. Studies on the bulk nanocrystalline Ni–Fe–Co alloy prepared by mechanical alloying–sintering–hot rolling route

    Article • Journal of Alloys and Compounds, May 2009, Elsevier

    Dr Sanjay kumar vajpai

  38. Preparation of nanocrystalline Ni–Fe strip via mechanical alloying–compaction–sintering–hot rolling route

    Article • Journal of Materials Science, January 2009, Springer Science + Business Media

    Dr Sanjay kumar vajpai

  39. Studies on the Mechanical Alloying of Ni-Fe-Co Powders and Its Explosive Compaction

    Article • Metallurgical and Materials Transactions A, July 2008, Springer Science + Business Media

    Dr Sanjay kumar vajpai