All Stories

  1. Harnessing the scientific synergy of welding and additive manufacturing

    Article • Science and Technology of Welding & Joining, May 2019, Taylor & Francis

    Professor HARSHAD K Bhadeshia, Professor T. DebRoy

  2. Sir Harry Bhadeshia retires after 24 years as an editor of the journal Science and Technology of Welding and Joining

    Article • Science and Technology of Welding & Joining, May 2019, Taylor & Francis

    Professor T. DebRoy

  3. Printability of 316 stainless steel

    Article • Science and Technology of Welding & Joining, April 2019, Taylor & Francis

    Professor T. DebRoy

  4. Cooling rates and peak temperatures during friction stir welding of a high-carbon steel

    Article • Scripta Materialia, January 2015, Elsevier

    Professor T. DebRoy

  5. Spatial variation of melt pool geometry, peak temperature and solidification parameters during laser assisted additive manufacturing process

    Article • Materials Science and Technology, November 2014, Taylor & Francis

    Professor T. DebRoy

  6. Toward an integrated computational system for describing the additive manufacturing process for metallic materials

    Article • Additive Manufacturing, October 2014, Elsevier

    Professor T. DebRoy

  7. Heat transfer and material flow during laser assisted multi-layer additive manufacturing

    Article • Journal of Applied Physics, September 2014, American Institute of Physics

    Professor T. DebRoy

  8. Passivation layer breakdown during laser-fired contact formation for photovoltaic devices

    Article • Applied Physics Letters, July 2014, American Institute of Physics

    Professor T. DebRoy

  9. Employing microsecond pulses to form laser-fired contacts in photovoltaic devices

    Article • Progress in Photovoltaics Research and Applications, June 2014, Wiley

    Professor T. DebRoy

  10. Real time monitoring of laser beam welding keyhole depth by laser interferometry

    Article • Science and Technology of Welding & Joining, June 2014, Taylor & Francis

    Professor T. DebRoy

  11. Material adhesion and stresses on friction stir welding tool pins

    Article • Science and Technology of Welding & Joining, June 2014, Taylor & Francis

    Professor T. DebRoy

  12. Friction stir welding of mild steel: tool durability and steel microstructure

    Article • Materials Science and Technology, March 2014, Taylor & Francis

    Professor T. DebRoy

  13. Weld bead center line shift during laser welding of austenitic stainless steels with different sulfur content

    Article • Scripta Materialia, January 2014, Elsevier

    Professor T. DebRoy

  14. Solidification Map of a Nickel-Base Alloy

    Article • Metallurgical and Materials Transactions A, December 2013, Springer Science + Business Media

    Professor T. DebRoy

  15. Role of processing parameters on morphology, resistance and composition of laser fired contacts

    Article • September 2013, SPIE

    Professor T. DebRoy

  16. Heat transfer and fluid flow in additive manufacturing

    Article • Journal of Laser Applications, January 2013, Laser Institute of America

    Professor T. DebRoy

  17. Laser-silicon interaction for selective emitter formation in photovoltaics. I. Numerical model and validation

    Article • Journal of Applied Physics, December 2012, American Institute of Physics

    Professor T. DebRoy

  18. Laser-silicon interaction for selective emitter formation in photovoltaics. II. Model applications

    Article • Journal of Applied Physics, December 2012, American Institute of Physics

    Professor T. DebRoy

  19. Modeling of contact geometry and dopant profile during laser-silicon interaction

    Article • October 2012, SPIE

    Professor T. DebRoy

  20. Tool durability maps for friction stir welding of an aluminium alloy

    Article • Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences, July 2012, Royal Society Publishing

    Professor HARSHAD K Bhadeshia, Professor T. DebRoy

  21. Erratum to: Load bearing capacity of tool pin during friction stir welding

    Article • The International Journal of Advanced Manufacturing Technology, May 2012, Springer Science + Business Media

    Professor T. DebRoy

  22. Mechanisms of Spiking and Humping in Keyhole Welding

    Article • IEEE Transactions on Components Packaging and Manufacturing Technology, March 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Professor T. DebRoy

  23. Evolution of laser-fired aluminum-silicon contact geometry in photovoltaic devices

    Article • Journal of Applied Physics, January 2012, American Institute of Physics

    Professor T. DebRoy

  24. Scaling Weld or Melt Pool Shape Affected by Thermocapillary Convection With High Prandtl Numbers

    Article • Journal of Heat Transfer, January 2012, ASME International

    Professor T. DebRoy

  25. Load bearing capacity of tool pin during friction stir welding

    Article • The International Journal of Advanced Manufacturing Technology, November 2011, Springer Science + Business Media

    Professor T. DebRoy

  26. Role of surface-active elements during keyhole-mode laser welding

    Article • Journal of Physics D Applied Physics, November 2011, Institute of Physics Publishing

    Professor T. DebRoy

  27. Scaling of spiking and humping in keyhole welding

    Article • Journal of Physics D Applied Physics, June 2011, Institute of Physics Publishing

    Professor T. DebRoy

  28. Review: friction stir welding tools

    Article • Science and Technology of Welding & Joining, May 2011, Taylor & Francis

    Professor T. DebRoy

  29. 1000 gems: celebration ofSTWJ

    Article • Science and Technology of Welding & Joining, May 2011, Taylor & Francis

    Professor T. DebRoy

  30. Optical emission spectroscopy of metal vapor dominated laser-arc hybrid welding plasma

    Article • Journal of Applied Physics, April 2011, American Institute of Physics

    Professor T. DebRoy

  31. A perspective on residual stresses in welding

    Article • Science and Technology of Welding & Joining, April 2011, Taylor & Francis

    Professor T. DebRoy

  32. Tool Geometry for Friction Stir Welding—Optimum Shoulder Diameter

    Article • Metallurgical and Materials Transactions A, March 2011, Springer Science + Business Media

    Professor T. DebRoy

  33. Back-of-the-envelope calculations in friction stir welding – Velocities, peak temperature, torque, and hardness

    Article • Acta Materialia, March 2011, Elsevier

    Professor T. DebRoy

  34. Influence of oxygen on weld geometry in fibre laser and fibre laser–GMA hybrid welding

    Article • Science and Technology of Welding & Joining, February 2011, Taylor & Francis

    Professor T. DebRoy

  35. Toward optimum friction stir welding tool shoulder diameter

    Article • Scripta Materialia, January 2011, Elsevier

    Professor T. DebRoy

  36. Synthesis of nanocomposite thin films with self-assembled structures by pulsed ion beam ablation of MoS2 target

    Article • Materials Letters, January 2011, Elsevier

    Professor T. DebRoy

  37. Cooling rate in 800 to 500°C range from dimensional analysis

    Article • Science and Technology of Welding & Joining, July 2010, Taylor & Francis

    Professor T. DebRoy

  38. Friction stir welding of dissimilar alloys – a perspective

    Article • Science and Technology of Welding & Joining, May 2010, Taylor & Francis

    Professor T. DebRoy

  39. Origin of stray grain formation in single-crystal superalloy weld pools from heat transfer and fluid flow modeling

    Article • Acta Materialia, February 2010, Elsevier

    Professor T. DebRoy

  40. Entrainment Effects on Annular Flow in a Keyhole with Free Surface

    Article • January 2010, American Institute of Physics

    Professor T. DebRoy

  41. Stray Grain Formation in Welds of Single-Crystal Ni-Base Superalloy CMSX-4

    Article • Metallurgical and Materials Transactions A, November 2009, Springer Science + Business Media

    Professor T. DebRoy

  42. Strains and strain rates during friction stir welding

    Article • Scripta Materialia, November 2009, Elsevier

    Professor T. DebRoy

  43. Problems and issues in laser-arc hybrid welding

    Article • International Materials Reviews, July 2009, Taylor & Francis

    Professor T. DebRoy

  44. The effects of Prandtl number on wavy weld boundary

    Article • International Journal of Heat and Mass Transfer, July 2009, Elsevier

    Professor T. DebRoy

  45. Critical assessment: friction stir welding of steels

    Article • Science and Technology of Welding & Joining, April 2009, Taylor & Francis

    Professor HARSHAD K Bhadeshia, Professor T. DebRoy

  46. Origin of wavy weld boundary

    Article • Journal of Applied Physics, March 2009, American Institute of Physics

    Professor T. DebRoy

  47. A Genetic Algorithm-Assisted Inverse Convective Heat Transfer Model for Tailoring Weld Geometry

    Article • Materials and Manufacturing Processes, February 2009, Taylor & Francis

    Professor T. DebRoy

  48. Unusual wavy weld pool boundary from dimensional analysis

    Article • Scripta Materialia, January 2009, Elsevier

    Professor T. DebRoy

  49. Torque, power requirement and stir zone geometry in friction stir welding through modeling and experiments

    Article • Scripta Materialia, January 2009, Elsevier

    Professor T. DebRoy

  50. The Effects of Mach Number on Keyhole Shape in High Intensity Beam Welding or Drilling

    Article • January 2009, ASME International

    Professor T. DebRoy

  51. Heat transfer and fluid flow during electron beam welding of 21Cr–6Ni–9Mn steel and Ti–6Al–4V alloy

    Article • Journal of Physics D Applied Physics, December 2008, Institute of Physics Publishing

    Professor T. DebRoy

  52. Numerical simulation of heat transfer and fluid flow in GTA/Laser hybrid welding

    Article • Science and Technology of Welding & Joining, November 2008, Taylor & Francis

    Professor T. DebRoy

  53. Orientation Imaging Microscopy of Stray Grain Formation in Single Crystal Weld Structures

    Article • Microscopy and Microanalysis, August 2008, Cambridge University Press

    Professor T. DebRoy

  54. Recent advances in friction-stir welding – Process, weldment structure and properties

    Article • Progress in Materials Science, August 2008, Elsevier

    Professor T. DebRoy

  55. An experimental and theoretical study of gas tungsten arc welding of stainless steel plates with different sulfur concentrations

    Article • Acta Materialia, May 2008, Elsevier

    Professor T. DebRoy

  56. Time resolved X-ray diffraction observations of phase transformations in transient arc welds

    Article • Science and Technology of Welding & Joining, April 2008, Taylor & Francis

    Professor Wei Zhang, Professor T. DebRoy

  57. Toward reliable calculations of heat and plastic flow during friction stir welding of Ti-6Al-4V alloy

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), April 2008, Carl Hanser Verlag

    Professor T. DebRoy

  58. A Convective Heat-Transfer Model for Partial and Full Penetration Keyhole Mode Laser Welding of a Structural Steel

    Article • Metallurgical and Materials Transactions A, November 2007, Springer Science + Business Media

    Professor T. DebRoy

  59. Heat transfer and fluid flow during keyhole mode laser welding of tantalum, Ti–6Al–4V, 304L stainless steel and vanadium

    Article • Journal of Physics D Applied Physics, August 2007, Institute of Physics Publishing

    Professor T. DebRoy

  60. Heat Transfer and Fluid Flow during Gas-Metal-Arc Fillet Welding for Various Joint Configurations and Welding Positions

    Article • Metallurgical and Materials Transactions A, April 2007, Springer Science + Business Media

    Professor T. DebRoy

  61. Tailoring gas tungsten arc weld geometry using a genetic algorithm and a neural network trained with convective heat flow calculations

    Article • Materials Science and Engineering A, April 2007, Elsevier

    Professor T. DebRoy

  62. A computationally efficient model of convective heat transfer and solidification characteristics during keyhole mode laser welding

    Article • Journal of Applied Physics, March 2007, American Institute of Physics

    Professor T. DebRoy

  63. Three-dimensional heat and material flow during friction stir welding of mild steel

    Article • Acta Materialia, February 2007, Elsevier

    Professor T. DebRoy

  64. Numerical modelling of 3D plastic flow and heat transfer during friction stir welding of stainless steel

    Article • Science and Technology of Welding & Joining, September 2006, Taylor & Francis

    Professor T. DebRoy

  65. Dimensionless correlation to estimate peak temperature during friction stir welding

    Article • Science and Technology of Welding & Joining, September 2006, Taylor & Francis

    Professor T. DebRoy

  66. Mathematical modeling of heat transfer, fluid flow, and solidification during linear welding with a pulsed laser beam

    Article • Journal of Applied Physics, August 2006, American Institute of Physics

    Professor T. DebRoy

  67. Numerical simulation of three-dimensional heat transfer and plastic flow during friction stir welding

    Article • Metallurgical and Materials Transactions A, April 2006, Springer Science + Business Media

    Professor T. DebRoy

  68. Tailoring weld geometry during keyhole mode laser welding using a genetic algorithm and a heat transfer model

    Article • Journal of Physics D Applied Physics, March 2006, Institute of Physics Publishing

    Professor T. DebRoy

  69. Non-isothermal grain growth in metals and alloys

    Article • Materials Science and Technology, March 2006, Taylor & Francis

    Professor T. DebRoy

  70. Improving reliability of heat and fluid flow calculation during conduction mode laser spot welding by multivariable optimisation

    Article • Science and Technology of Welding & Joining, March 2006, Taylor & Francis

    Professor T. DebRoy

  71. Neural network model of heat and fluid flow in gas metal arc fillet welding based on genetic algorithm and conjugate gradient optimisation

    Article • Science and Technology of Welding & Joining, February 2006, Taylor & Francis

    Professor T. DebRoy

  72. Liquid metal expulsion during laser spot welding of 304 stainless steel

    Article • Journal of Physics D Applied Physics, January 2006, Institute of Physics Publishing

    Professor T. DebRoy

  73. Novel Optimization Methodology for Welding Process/Consumable Integration

    Article • January 2006, Office of Scientific and Technical Information (OSTI)

    Professor T. DebRoy

  74. Novel Optimization Methodology for Welding Process/Consumable Integration

    Article • January 2006, Office of Scientific and Technical Information (OSTI)

    Professor T. DebRoy

  75. Tailoring complex weld geometry through reliable heat-transfer and fluid-flow calculations and a genetic algorithm

    Article • Metallurgical and Materials Transactions A, October 2005, Springer Science + Business Media

    Professor T. DebRoy

  76. Modeling of ferrite formation in a duplex stainless steel weld considering non-uniform starting microstructure

    Article • Acta Materialia, September 2005, Elsevier

    Professor T. DebRoy

  77. A Smart Bi-Directional Model of Heat Transfer and Free Surface Flow in Gas-Metal-Arc Fillet Welding for Practising Engineers

    Article • Welding in the World, September 2005, Springer Science + Business Media

    Professor T. DebRoy

  78. Integrated modelling of thermal cycles, austenite formation, grain growth and decomposition in the heat affected zone of carbon steel

    Article • Science and Technology of Welding & Joining, September 2005, Taylor & Francis

    Professor T. DebRoy

  79. A heat-transfer and fluid-flow-based model to obtain a specific weld geometry using various combinations of welding variables

    Article • Journal of Applied Physics, August 2005, American Institute of Physics

    Professor T. DebRoy

  80. A computational procedure for finding multiple solutions of convective heat transfer equations

    Article • Journal of Physics D Applied Physics, August 2005, Institute of Physics Publishing

    Professor T. DebRoy

  81. Probing liquation cracking and solidification through modeling of momentum, heat, and solute transport during welding of aluminum alloys

    Article • Journal of Applied Physics, May 2005, American Institute of Physics

    Professor T. DebRoy

  82. Heat transfer and fluid flow in laser microwelding

    Article • Journal of Applied Physics, April 2005, American Institute of Physics

    Professor T. DebRoy

  83. Optimization of the johnson-mehl-avarami equation parameters for α-ferrite to γ-austenite transformation in steel welds using a genetic algorithm

    Article • Metallurgical and Materials Transactions A, January 2005, Springer Science + Business Media

    Professor T. DebRoy

  84. Improving reliability of modelling heat and fluid flow in complex gas metal arc fillet welds—part I: an engineering physics model

    Article • Journal of Physics D Applied Physics, December 2004, Institute of Physics Publishing

    Professor T. DebRoy

  85. Improving reliability of modelling heat and fluid flow in complex gas metal arc fillet welds—part II: application to welding of steel

    Article • Journal of Physics D Applied Physics, December 2004, Institute of Physics Publishing

    Professor T. DebRoy

  86. A fresh beginning

    Article • Science and Technology of Welding & Joining, December 2004, Taylor & Francis

    Professor T. DebRoy

  87. Guaranteed fillet weld geometry from heat transfer model and multivariable optimization

    Article • International Journal of Heat and Mass Transfer, December 2004, Elsevier

    Professor T. DebRoy

  88. Composition change of stainless steel during microjoining with short laser pulse

    Article • Journal of Applied Physics, October 2004, American Institute of Physics

    Professor T. DebRoy

  89. Grain topology in Ti–6Al–4V welds—Monte Carlo simulation and experiments

    Article • Journal of Physics D Applied Physics, July 2004, Institute of Physics Publishing

    Professor T. DebRoy

  90. Laser assisted cleaning of oxide films on SUS409 stainless steel

    Article • Journal of Laser Applications, January 2004, Laser Institute of America

    Professor T. DebRoy

  91. Probing unknown welding parameters from convective heat transfer calculation and multivariable optimization

    Article • Journal of Physics D Applied Physics, December 2003, Institute of Physics Publishing

    Professor T. DebRoy

  92. Alloying element vaporization during laser spot welding of stainless steel

    Article • Journal of Physics D Applied Physics, November 2003, Institute of Physics Publishing

    Professor T. DebRoy

  93. Probing temperature during laser spot welding from vapor composition and modeling

    Article • Journal of Applied Physics, November 2003, American Institute of Physics

    Professor T. DebRoy

  94. Understanding metal vaporizaiton from laser welding.

    Article • September 2003, Office of Scientific and Technical Information (OSTI)

    Professor T. DebRoy

  95. Erratum to “Kinetic modeling of phase transformations occurring in the HAZ of C-Mn steel welds based on direct observations” [Acta Materiala 51 (2003) page 3333–3349

    Article • Acta Materialia, September 2003, Elsevier

    Professor T. DebRoy

  96. Modeling of temperature field and solidified surface profile during gas–metal arc fillet welding

    Article • Journal of Applied Physics, August 2003, American Institute of Physics

    Professor T. DebRoy

  97. Calculation of three-dimensional electromagnetic force field during arc welding

    Article • Journal of Applied Physics, July 2003, American Institute of Physics

    Professor T. DebRoy

  98. Kinetic modeling of phase transformations occurring in the HAZ of C-Mn steel welds based on direct observations

    Article • Acta Materialia, July 2003, Elsevier

    Professor T. DebRoy

  99. Macroporosity free aluminum alloy weldments through numerical simulation of keyhole mode laser welding

    Article • Journal of Applied Physics, June 2003, American Institute of Physics

    Professor T. DebRoy

  100. Heat transfer and fluid flow during laser spot welding of 304 stainless steel

    Article • Journal of Physics D Applied Physics, May 2003, Institute of Physics Publishing

    Professor T. DebRoy

  101. In situobservations of weld pool solidification using transparent metal-analog systems

    Article • Journal of Applied Physics, April 2003, American Institute of Physics

    Professor T. DebRoy

  102. Nonisothermal growth and dissolution of inclusions in liquid steels

    Article • Metallurgical and Materials Transactions B, April 2003, Springer Science + Business Media

    Professor T. DebRoy

  103. Modeling of heat transfer and fluid flow during gas tungsten arc spot welding of low carbon steel

    Article • Journal of Applied Physics, March 2003, American Institute of Physics

    Professor T. DebRoy

  104. Numerical Simulation of Electromagnetically Driven Flow in the Weld Pool During Arc Welding

    Article • January 2003, ASME International

    Professor T. DebRoy

  105. Modeling and real time mapping of phases during GTA welding of 1005 steel

    Article • Materials Science and Engineering A, August 2002, Elsevier

    Professor T. DebRoy

  106. Kinetics of ferrite to austenite transformation during welding of 1005 steel

    Article • Scripta Materialia, May 2002, Elsevier

    Professor T. DebRoy

  107. Three-dimensional monte carlo simulation of grain growth in zone-refined iron

    Article • Metallurgical and Materials Transactions B, December 2001, Springer Science + Business Media

    Professor T. DebRoy

  108. Geometry of laser spot welds from dimensionless numbers

    Article • Metallurgical and Materials Transactions B, October 2001, Springer Science + Business Media

    Professor T. DebRoy

  109. Effects of time, temperature, and steel composition on growth and dissolution of inclusions in liquid steels

    Article • Ironmaking & Steelmaking, July 2001, Taylor & Francis

    Professor T. DebRoy

  110. Effects of time, temperature, and steel composition on growth and dissolution of inclusions in liquid steels

    Article • Ironmaking & Steelmaking, June 2001, Maney Publishing

    Professor T. DebRoy

  111. Time-temperature-transformation diagrams for the growth and dissolution of inclusions in liquid steels

    Article • Scripta Materialia, March 2001, Elsevier

    Professor T. DebRoy

  112. Weld metal composition change during conduction mode laser welding of aluminum alloy 5182

    Article • Metallurgical and Materials Transactions B, February 2001, Springer Science + Business Media

    Professor T. DebRoy

  113. Pore formation during continuous wave Nd:YAG laser welding of aluminium for automotive applications

    Article • Welding International, January 2001, Taylor & Francis

    Professor T. DebRoy

  114. Numerical modeling of enhanced nitrogen dissolution during gas tungsten Arc welding

    Article • Metallurgical and Materials Transactions B, December 2000, Springer Science + Business Media

    Professor T. DebRoy

  115. Three dimensional Monte Carlo simulation of grain growth during GTA welding of titanium

    Article • Acta Materialia, December 2000, Elsevier

    Professor T. DebRoy

  116. Three-dimensional monte carlo simulation of grain growth in the heat-affected zone of a 2.25Cr-1Mo steel weld

    Article • Metallurgical and Materials Transactions B, June 2000, Springer Science + Business Media

    Professor T. DebRoy

  117. Modeling of inclusion growth and dissolution in the weld pool

    Article • Metallurgical and Materials Transactions B, February 2000, Springer Science + Business Media

    Professor T. DebRoy

  118. Continuous wave-Nd: yttrium–aluminum–garnet laser welding of AM60B magnesium alloy

    Article • Journal of Laser Applications, January 2000, Laser Institute of America

    Professor T. DebRoy

  119. Modeling macro-and microstructures of Gas-Metal-Arc Welded HSLA-100 steel

    Article • Metallurgical and Materials Transactions B, June 1999, Springer Science + Business Media

    Professor T. DebRoy

  120. Current issues and problems in laser welding of automotive aluminium alloys

    Article • International Materials Reviews, June 1999, Taylor & Francis

    Professor T. DebRoy

  121. Inclusion formation in low-alloy steel welds

    Article • November 1998, Office of Scientific and Technical Information (OSTI)

    Professor T. DebRoy

  122. Enhanced dissolution of nitrogen during gas tungsten arc welding of steels

    Article • Science and Technology of Welding & Joining, August 1998, Taylor & Francis

    Professor T. DebRoy

  123. Enhanced dissolution of nitrogen during gas tungsten arc welding of steels

    Article • Science and Technology of Welding & Joining, August 1998, Maney Publishing

    Professor T. DebRoy

  124. Quantitative modelling of motion, temperature gyrations, and growth of inclusions in weld pool

    Article • Science and Technology of Welding & Joining, February 1998, Taylor & Francis

    Professor T. DebRoy

  125. Quantitative modelling of motion, temperature gyrations, and growth of inclusions in weld pool

    Article • Science and Technology of Welding & Joining, February 1998, Maney Publishing

    Professor T. DebRoy

  126. Absorption and transport of hydrogen during gas metal arc welding of low alloy steel

    Article • Science and Technology of Welding & Joining, August 1997, Taylor & Francis

    Professor T. DebRoy

  127. Absorption and transport of hydrogen during gas metal arc welding of low alloy steel

    Article • Science and Technology of Welding & Joining, August 1997, Maney Publishing

    Professor T. DebRoy

  128. Kinetics of directed oxidation of Al-Mg alloys into A12O3 preforms

    Article • Materials Science and Engineering A, July 1997, Elsevier

    Professor T. DebRoy

  129. Weld metal microstructure prediction from fundamentals of transport phenomena and phase transformation theory

    Article • Science and Technology of Welding & Joining, April 1997, Taylor & Francis

    Professor T. DebRoy

  130. Weld metal microstructure prediction from fundamentals of transport phenomena and phase transformation theory

    Article • Science and Technology of Welding & Joining, April 1997, Maney Publishing

    Professor T. DebRoy

  131. Metal distribution in alumina/aluminium composites synthesized by directed metal oxidation

    Article • Journal of Materials Science, October 1996, Springer Science + Business Media

    Professor T. DebRoy

  132. Interdiffusion in the MgO-Al2O3 spinel with or without some dopants

    Article • Metallurgical and Materials Transactions A, August 1996, Springer Science + Business Media

    Professor T. DebRoy

  133. Kinetics of directed oxidation of Al-Mg alloys in the initial and final stages of synthesis of Al2O3/Al composites

    Article • Materials Science and Engineering A, June 1996, Elsevier

    Professor T. DebRoy

  134. Coarsening of oxide inclusions in low alloy steel welds

    Article • Science and Technology of Welding & Joining, February 1996, Taylor & Francis

    Professor T. DebRoy

  135. Coarsening of oxide inclusions in low alloy steel welds

    Article • Science and Technology of Welding & Joining, February 1996, Maney Publishing

    Professor T. DebRoy

  136. Probing the initial stage of synthesis of Al2O3/Al composites by directed oxidation of Al-Mg alloys

    Article • Metallurgical and Materials Transactions B, February 1996, Springer Science + Business Media

    Professor T. DebRoy

  137. NUMERICAL PREDICTION OF FLUID FLOW AND HEAT TRANSFER IN WELDING WITH A MOVING HEAT SOURCE

    Article • Numerical Heat Transfer Part A Applications, February 1996, Taylor & Francis

    Professor T. DebRoy

  138. Growth stage kinetics in the synthesis of Al2O3/Al composites by directed oxidation of Al-Mg and Al-Mg-Si alloys

    Article • Journal of the European Ceramic Society, January 1996, Elsevier

    Professor T. DebRoy

  139. Modeling of fundamental phenomena in welds

    Article • Modelling and Simulation in Materials Science and Engineering, March 1995, Institute of Physics Publishing

    Professor T. DebRoy

  140. A general model for partitioning of gases between a metal and its plasma environment

    Article • Metallurgical and Materials Transactions B, February 1995, Springer Science + Business Media

    Professor T. DebRoy

  141. Development of macro- and microstructures of carbon–manganese low alloy steel welds: inclusion formation

    Article • Materials Science and Technology, February 1995, Taylor & Francis

    Professor T. DebRoy

  142. Physical processes in fusion welding

    Article • Reviews of Modern Physics, January 1995, American Physical Society (APS)

    Professor T. DebRoy

  143. Optical emissions during plasma assisted chemical vapor deposition of diamond-like carbon films

    Article • Diamond and Related Materials, December 1994, Elsevier

    Professor T. DebRoy

  144. Electrical Conductivity of Alumina/Aluminum Composites Synthesized by Directed Metal Oxidation

    Article • Journal of the American Ceramic Society, November 1994, Wiley

    Professor T. DebRoy

  145. Oxide Matrix Composite by Directional Oxidation of a Commercial Aluminum-Magnesium Alloy

    Article • Journal of the American Ceramic Society, May 1994, Wiley

    Professor T. DebRoy

  146. Effect of Pressure on Plasma-Assisted Chemical Vapor. Deposition of Silicon Oxide(s)

    Article • Journal of the American Ceramic Society, May 1994, Wiley

    Professor T. DebRoy

  147. Transport phenomena in the scale-up of hot filament-assisted chemical vapor deposition of diamond

    Article • Surface and Coatings Technology, December 1993, Elsevier

    Professor T. DebRoy

  148. Experimental studies on nitrogen solubility in Nd2Fe14B alloy in the temperature range 773–1143 K

    Article • Journal of Magnetism and Magnetic Materials, October 1993, Elsevier

    Professor T. DebRoy

  149. Calculation of weld metal composition change in high-power conduction mode carbon dioxide laser-welded stainless steels

    Article • February 1993, Springer Science + Business Media

    Professor T. DebRoy

  150. Modeling of substrate surface temperature distribution during hot-filament assisted diamond deposition

    Article • Diamond and Related Materials, December 1992, Elsevier

    Professor T. DebRoy

  151. Liquid metal expulsion during laser irradiation

    Article • Journal of Applied Physics, October 1992, American Institute of Physics

    Professor T. DebRoy

  152. Current Issues and Problems in Welding Science

    Article • Science, July 1992, American Association for the Advancement of Science

    Professor T. DebRoy

  153. Modeling of the role of atomic hydrogen in heat transfer during hot filament assisted deposition of diamond

    Article • Journal of Applied Physics, July 1992, American Institute of Physics

    Professor T. DebRoy

  154. Hydrogen assisted heat transfer during diamond growth using carbon and tantalum filaments

    Article • Applied Physics Letters, April 1992, American Institute of Physics

    Professor T. DebRoy

  155. Nitrogen activity determination in plasmas

    Article • March 1992, Springer Science + Business Media

    Professor T. DebRoy

  156. Diamond growth with locally supplied methane and acetylene

    Article • Journal of Materials Research, February 1992, Cambridge University Press

    Professor T. DebRoy

  157. Effect of temperature and composition on surface tension in Fe-Ni-Cr alloys containing sulfur

    Article • August 1991, Springer Science + Business Media

    Professor T. DebRoy

  158. Probing laser induced metal vaporization by gas dynamics and liquid pool transport phenomena

    Article • Journal of Applied Physics, August 1991, American Institute of Physics

    Professor T. DebRoy

  159. Thermochemistry and diffusion of nitrogen in solid molybdenum

    Article • April 1991, Springer Science + Business Media

    Professor T. DebRoy

  160. Nitrogen solubility in solid niobium

    Article • February 1991, Springer Science + Business Media

    Professor T. DebRoy

  161. Oxidation of diamond films synthesized by hot filament assisted chemical vapor deposition

    Article • Journal of Materials Research, November 1990, Cambridge University Press

    Professor T. DebRoy

  162. Energy absorption by metal‐vapor‐dominated plasma during carbon dioxide laser welding of steels

    Article • Journal of Applied Physics, September 1990, American Institute of Physics

    Professor T. DebRoy

  163. Role of heat transfer and fluid flow in the chemical vapor deposition of diamond

    Article • Journal of Applied Physics, September 1990, American Institute of Physics

    Professor T. DebRoy

  164. TEM characterization of structural changes in graphite plates due to pulsed CO2 laser irradiation

    Article • Journal of Materials Science Letters, September 1990, Springer Science + Business Media

    Professor T. DebRoy

  165. Fuming of stannous oxide from silicate melts

    Article • June 1990, Springer Science + Business Media

    Professor T. DebRoy

  166. Modeling of interfacial phenomena in welding

    Article • June 1990, Springer Science + Business Media

    Professor T. DebRoy

  167. Laser-Induced Calcite-Aragonite Transition

    Article • Journal of the American Ceramic Society, March 1990, Wiley

    Professor T. DebRoy

  168. Heat transfer during Nd: Yag pulsed laser welding and its effect on solidification structure of austenitic stainless steels

    Article • May 1989, Springer Science + Business Media

    Professor T. DebRoy

  169. Emission spectroscopy of plasma during laser welding of AISI 201 stainless steel

    Article • Metallurgical and Materials Transactions B, April 1989, Springer Science + Business Media

    Professor T. DebRoy

  170. Diamond formation in air by the Fedoseev-Derjaguin laser process

    Article • Carbon, January 1989, Elsevier

    Professor T. DebRoy

  171. Free surface flow and heat transfer in conduction mode laser welding

    Article • December 1988, Springer Science + Business Media

    Professor T. DebRoy

  172. Effects of oxygen and sulfur on alloying element vaporization rates during laser welding

    Article • December 1988, Springer Science + Business Media

    Professor T. DebRoy

  173. Desulphurization of coal-derived char using mixtures of steam and methane

    Article • Fuel, November 1988, Elsevier

    Professor T. DebRoy

  174. High‐pressure phases of SiO2made in air by Fedoseev–Derjaguin laser process

    Article • Applied Physics Letters, October 1988, American Institute of Physics

    Professor T. DebRoy

  175. Nitrogen solubility in solid niobium

    Article • August 1988, Springer Science + Business Media

    Professor T. DebRoy

  176. Effect of low-pressure argon plasma on metal vaporization rates

    Article • Materials Letters, July 1988, Elsevier

    Professor T. DebRoy

  177. Surface tension of binary metal—surface active solute systems under conditions relevant to welding metallurgy

    Article • June 1988, Springer Science + Business Media

    Professor T. DebRoy

  178. Separation of synthetic diamond from carbon black by oxidation

    Article • Carbon, January 1988, Elsevier

    Professor T. DebRoy

  179. Mechanism of alloying element vaporization during laser welding

    Article • December 1987, Springer Science + Business Media

    Professor T. DebRoy

  180. Interfacial tension between low pressure argon plasma and molten copper and iron

    Article • September 1987, Springer Science + Business Media

    Professor T. DebRoy

  181. Reaction between CO2 and coke doped with NaCN

    Article • Carbon, January 1987, Elsevier

    Professor T. DebRoy

  182. A comparative study of the roles of KCN and NaCN as catalytic precursors in the Boudouard reaction

    Article • Fuel, January 1987, Elsevier

    Professor T. DebRoy

  183. Structural effects in the reaction between carbon dioxide and coke doped with various potassium bearing catalytic precursors

    Article • September 1986, Springer Science + Business Media

    Professor T. DebRoy

  184. Absorption of CO2 laser beam by AISI 4340 steel

    Article • December 1985, Springer Science + Business Media

    Professor T. DebRoy

  185. Electronic and ionic transport in liquid PbO-SiO2 systems

    Article • December 1985, Springer Science + Business Media

    Professor T. DebRoy

  186. Numerical calculation of fluid flow in a continuous casting tundish

    Article • September 1985, Springer Science + Business Media

    Professor T. DebRoy

  187. Oxygen Pressure Dependence of Lead Ion Transport in PbO-SiO2 Melts

    Article • Journal of the American Ceramic Society, April 1985, Wiley

    Professor T. DebRoy

  188. Alloying element vaporization and weld pool temperature during laser welding of AlSl 202 stainless steel

    Article • December 1984, Springer Science + Business Media

    Professor T. DebRoy

  189. Electrical Conductivity of PbO-SiO2Liquids Containing Pb Precipitates

    Article • Canadian Metallurgical Quarterly, July 1984, Taylor & Francis

    Professor T. DebRoy

  190. Electrical Conductivity of PbO-SiO2 Liquids Containing Pb Precipitates

    Article • Canadian Metallurgical Quarterly, July 1984, Maney Publishing

    Professor T. DebRoy

  191. Temperature profiles, the size of the heat-affected zone and dilution in electroslag welding

    Article • Materials Science and Engineering, November 1982, Elsevier

    Professor T. DebRoy

  192. Heat generation patterns and temperature profiles in electroslag welding

    Article • December 1980, Springer Science + Business Media

    Professor T. DebRoy