All Stories

  1. Controlling Molecular Doping in Organic Semiconductors

    Article • Advanced Materials, September 2017, Wiley

    Professor Adam J. Moule

  2. Nanoscale Morphology of Doctor Bladed versus Spin-Coated Organic Photovoltaic Films

    Article • Advanced Energy Materials, August 2017, Wiley

    Professor Adam J. Moule, Balaji Pokuri

  3. Quantitative Measurements of the Temperature-Dependent Microscopic and Macroscopic Dynamics of a Molecular Dopant in a Conjugated Polymer

    Article • Macromolecules, July 2017, American Chemical Society (ACS)

    Professor Adam J. Moule

  4. Identifying Atomic Scale Structure in Undoped/Doped Semicrystalline P3HT Using Inelastic Neutron Scattering

    Article • Macromolecules, March 2017, American Chemical Society (ACS)

    Professor Adam J. Moule

  5. Modeling organic electronic materials: bridging length and time scales

    Article • Molecular Simulation, March 2017, Taylor & Francis

    Professor Adam J. Moule

  6. Quantitative Dedoping of Conductive Polymers

    Article • Chemistry of Materials, January 2017, American Chemical Society (ACS)

    Professor Adam J. Moule

  7. Optical Dedoping Mechanism for P3HT:F4TCNQ Mixtures

    Article • The Journal of Physical Chemistry Letters, November 2016, American Chemical Society (ACS)

    Professor Adam J. Moule

  8. Direct-Write Optical Patterning of P3HT Films Beyond the Diffraction Limit

    Article • Advanced Materials, October 2016, Wiley

    Professor Adam J. Moule

  9. Nanoscale Morphology of PTB7 Based Organic Photovoltaics as a Function of Fullerene Size

    Article • Scientific Reports, August 2016, Nature

    Professor Adam J. Moule

  10. Solution aging and degradation of a transparent conducting polymer dispersion

    Article • Organic Electronics, July 2016, Elsevier

    Professor Adam J. Moule

  11. The effect of thermal annealing on dopant site choice in conjugated polymers

    Article • Organic Electronics, June 2016, Elsevier

    Professor Adam J. Moule

  12. Comparison of solution-mixed and sequentially processed P3HT:F4TCNQ films: effect of doping-induced aggregation on film morphology

    Article • Journal of Materials Chemistry C, January 2016, Royal Society of Chemistry

    Professor Adam J. Moule

  13. Measurement of Small Molecular Dopant F4TCNQ and C60F36 Diffusion in Organic Bilayer Architectures

    Article • ACS Applied Materials & Interfaces, December 2015, American Chemical Society (ACS)

    Professor Adam J. Moule

  14. Introducing Solubility Control for Improved Organic P-Type Dopants

    Article • Chemistry of Materials, August 2015, American Chemical Society (ACS)

    Professor Adam J. Moule

  15. Reversible Optical Control of Conjugated Polymer Solubility with Sub-micrometer Resolution

    Article • ACS Nano, February 2015, American Chemical Society (ACS)

    Professor Adam J. Moule

  16. Mixed interlayers at the interface between PEDOT:PSS and conjugated polymers provide charge transport control

    Article • Journal of Materials Chemistry C, January 2015, Royal Society of Chemistry

    Professor Adam J. Moule, Professor Yabing Qi

  17. Molecular Dynamics Study of the Local Structure of Photovoltaic Polymer PCDTBT

    Article • Journal of Chemical & Engineering Data, September 2014, American Chemical Society (ACS)

    Professor Adam J. Moule

  18. Effect of fractal silver electrodes on charge collection and light distribution in semiconducting organic polymer films

    Article • Journal of Materials Chemistry A, August 2014, Royal Society of Chemistry

    Professor Adam J. Moule

  19. Material profile influences in bulk-heterojunctions

    Article • Journal of Polymer Science Part B Polymer Physics, August 2014, Wiley

    Professor Adam J. Moule

  20. P3HT:PCBM Bulk-Heterojunctions: Observing Interfacial and Charge Transfer States with Surface Photovoltage Spectroscopy

    Article • The Journal of Physical Chemistry C, July 2014, American Chemical Society (ACS)

    Professor Adam J. Moule

  21. High work-function hole transport layers by self-assembly using a fluorinated additive

    Article • Journal of Materials Chemistry C, January 2014, Royal Society of Chemistry

    Professor Adam J. Moule

  22. P3HT-Based Solar Cells: Structural Properties and Photovoltaic Performance

    Article • January 2014, Springer Science + Business Media

    Professor Adam J. Moule

  23. Photochemical Charge Separation in Poly(3-hexylthiophene) (P3HT) Films Observed with Surface Photovoltage Spectroscopy

    Article • The Journal of Physical Chemistry C, December 2013, American Chemical Society (ACS)

    Professor Adam J. Moule

  24. Correlating dilute solvent interactions to morphology and OPV device performance

    Article • Organic Electronics, October 2013, Elsevier

    Professor Adam J. Moule

  25. Packing Dependent Electronic Coupling in Single Poly(3-hexylthiophene) H- and J-Aggregate Nanofibers

    Article • The Journal of Physical Chemistry, April 2013, American Chemical Society (ACS)

    Professor Adam J. Moule

  26. Quantifying organic solar cell morphology: a computational study of three-dimensional maps

    Article • Energy & Environmental Science, January 2013, Royal Society of Chemistry

    Professor Adam J. Moule

  27. The effect of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane charge transfer dopants on the conformation and aggregation of poly(3-hexylthiophene)

    Article • Journal of Materials Chemistry C, January 2013, Royal Society of Chemistry

    Professor Adam J. Moule

  28. Self-Assembly of Selective Interfaces in Organic Photovoltaics

    Article • Advanced Functional Materials, November 2012, Wiley

    Professor Adam J. Moule

  29. Three-Dimensional Concentration Mapping of Organic Blends

    Article • Advanced Functional Materials, November 2012, Wiley

    Professor Adam J. Moule

  30. Directional dependence of electron blocking in PEDOT:PSS

    Article • Organic Electronics, November 2012, Elsevier

    Professor Adam J. Moule

  31. Final Closeout report for grant FG36-08GO18018, titled: Functional Multi-Layer Solution Processable Polymer Solar Cells

    Article • May 2012, Office of Scientific and Technical Information (OSTI)

    Professor Adam J. Moule

  32. Investigating the Morphology of Polymer/Fullerene Layers Coated Using Orthogonal Solvents

    Article • The Journal of Physical Chemistry C, April 2012, American Chemical Society (ACS)

    Professor Adam J. Moule

  33. J-Aggregate Behavior in Poly-3-hexylthiophene Nanofibers

    Article • The Journal of Physical Chemistry Letters, January 2012, American Chemical Society (ACS)

    Professor Adam J. Moule

  34. Hybrid solar cells: basic principles and the role of ligands

    Article • Journal of Materials Chemistry, January 2012, Royal Society of Chemistry

    Professor Pieter Stroeve, Professor Adam J. Moule

  35. Calcium niobate nanosheets as a novel electron transport material for solution-processed multi-junction polymer solar cells

    Article • Journal of Materials Chemistry, January 2012, Royal Society of Chemistry

    Professor Adam J. Moule

  36. Controlling microstructure in poly(3-hexylthiophene) nanofibers

    Article • Journal of Materials Chemistry, January 2012, Royal Society of Chemistry

    Professor Adam J. Moule

  37. Excited-State Self-Trapping and Ground-State Relaxation Dynamics in Poly(3-hexylthiophene) Resolved with Broadband Pump–Dump–Probe Spectroscopy

    Article • The Journal of Physical Chemistry Letters, November 2011, American Chemical Society (ACS)

    Professor Adam J. Moule

  38. Characterization of new transparent organic electrode materials

    Article • Organic Electronics, November 2011, Elsevier

    Professor Adam J. Moule

  39. Acceptor dependent polaron recombination dynamics in poly 3-hexyl thiophene: Fullerene composite films

    Article • Chemical Physics Letters, September 2011, Elsevier

    Professor Adam J. Moule

  40. The Consequences of Interface Mixing on Organic Photovoltaic Device Characteristics

    Article • Advanced Functional Materials, March 2011, Wiley

    Professor Adam J. Moule

  41. Effect of Trace Solvent on the Morphology of P3HT:PCBM Bulk Heterojunction Solar Cells

    Article • Advanced Functional Materials, March 2011, Wiley

    Professor Adam J. Moule

  42. Characterization of polymer–fullerene mixtures for organic photovoltaics by systematically coarse-grained molecular simulations

    Article • Fluid Phase Equilibria, March 2011, Elsevier

    Professor Adam J. Moule

  43. Power from plastic

    Article • Current Opinion in Solid State and Materials Science, December 2010, Elsevier

    Professor Adam J. Moule

  44. A comparative MD study of the local structure of polymer semiconductors P3HT and PBTTT

    Article • Physical Chemistry Chemical Physics, January 2010, Royal Society of Chemistry

    Professor Adam J. Moule

  45. Morphology Control in Solution-Processed Bulk-Heterojunction Solar Cell Mixtures

    Article • Advanced Functional Materials, October 2009, Wiley

    Professor Adam J. Moule

  46. Intensity-dependent photocurrent generation at the anode in bulk-heterojunction solar cells

    Article • Applied Physics B Photophysics and Laser Chemistry, July 2008, Springer Science + Business Media

    Professor Adam J. Moule

  47. Controlling Morphology in Polymer–Fullerene Mixtures

    Article • Advanced Materials, January 2008, Wiley

    Professor Adam J. Moule

  48. Inside Front Cover: Controlling Morphology in Polymer–Fullerene Mixtures (Adv. Mater. 2/2008)

    Article • Advanced Materials, January 2008, Wiley

    Professor Adam J. Moule

  49. Controlling organic polymer structure

    Article • SPIE Newsroom, January 2008, SPIE

    Professor Adam J. Moule

  50. Efficiency Enhancements in Solid-State Hybrid Solar Cells via Reduced Charge Recombination and Increased Light Capture

    Article • Nano Letters, November 2007, American Chemical Society (ACS)

    Professor Adam J. Moule

  51. Interference method for the determination of the complex refractive index of thin polymer layers

    Article • Applied Physics Letters, August 2007, American Institute of Physics

    Professor Adam J. Moule

  52. Minimizing optical losses in bulk heterojunction polymer solar cells

    Article • Applied Physics B Photophysics and Laser Chemistry, December 2006, Springer Science + Business Media

    Professor Adam J. Moule

  53. The effect of active layer thickness and composition on the performance of bulk-heterojunction solar cells

    Article • Journal of Applied Physics, November 2006, American Institute of Physics

    Professor Adam J. Moule

  54. The effect of active layer thickness on the efficiency of polymer solar cells

    Article • August 2005, SPIE

    Professor Adam J. Moule

  55. Detailed study of the decay mechanism in polymeric OLEDs

    Article • August 2005, SPIE

    Professor Adam J. Moule

  56. High-resolution NMR of static samples by rotation of the magnetic field

    Article • Journal of Magnetic Resonance, July 2004, Elsevier

    Professor Adam J. Moule

  57. Amplification of xenon NMR and MRI by remote detection

    Article • Proceedings of the National Academy of Sciences, July 2003, Proceedings of the National Academy of Sciences

    Professor Adam J. Moule

  58. Variable rotation composite pulses for high resolution nuclear magnetic resonance using inhomogeneous magnetic and radiofrequency fields

    Article • Chemical Physics Letters, September 2002, Elsevier

    Professor Adam J. Moule

  59. Laser-polarized 129Xe NMR and MRI at Ultralow Magnetic Fields

    Article • Journal of Magnetic Resonance, August 2002, Elsevier

    Professor Adam J. Moule

  60. Two-Dimensional High-Resolution NMR Spectra in Matched B0 and B1 Field Gradients

    Article • Journal of Magnetic Resonance, May 2002, Elsevier

    Professor Adam J. Moule

  61. Resolution of 129 Xe Chemical Shifts at Ultralow Magnetic Field

    Article • Journal of the American Chemical Society, August 2001, American Chemical Society (ACS)

    Professor Adam J. Moule