All Stories

  1. Vacuum TLP bonding of Inconel 617 superalloy using Ni-Cr-Si-Fe-B filler metal: Metallurgical structure and mechanical properties

    Article • Vacuum, June 2018, Elsevier

    Dr Seyyed Ehsan Mirsalehi

  2. The ablation behavior of ZrB 2 -SiC coating prepared by shrouded plasma spray on SiC-coated graphite

    Article • Journal of Alloys and Compounds, April 2018, Elsevier

    Dr Seyyed Ehsan Mirsalehi

  3. Effect of Joining Atmosphere in Transient Liquid Phase Bonding of Inconel 617 Superalloy

    Article • Metallurgical and Materials Transactions B, October 2017, Springer Science + Business Media

    Dr Seyyed Ehsan Mirsalehi

  4. Microstructural and mechanical assessment of transient liquid phase bonded commercially pure titanium

    Article • Canadian Metallurgical Quarterly, July 2017, Taylor & Francis

    Dr Seyyed Ehsan Mirsalehi, Amin Abdollahzadeh

  5. Investigation on Metallurgical Structure and Mechanical Properties of Dissimilar Al 2024/Cu FSW T-joints

    Article • Transactions of the Indian Institute of Metals, November 2016, Springer Science + Business Media

    Dr Seyyed Ehsan Mirsalehi

  6. Mechanical and metallurgical characterization of AA6061 friction stir welded joints using microhardness map

    Article • Transactions of Nonferrous Metals Society of China, September 2016, Elsevier

    Dr Seyyed Ehsan Mirsalehi

  7. Interfacial and Mechanical Behavior of AA5456 Filling Friction-Stir-Welded Lap Joints Using Similar and Dissimilar Pins

    Article • Metallurgical and Materials Transactions B, June 2016, Springer Science + Business Media

    Dr Seyyed Ehsan Mirsalehi

  8. Effect of pin penetration depth on double-sided friction stir welded joints of AA6061-T913 alloy

    Article • Transactions of Nonferrous Metals Society of China, March 2016, Elsevier

    Dr Seyyed Ehsan Mirsalehi

  9. Single- and double-pass FSW lap joining of AA5456 sheets with different thicknesses

    Article • Materials Science and Technology, February 2016, Taylor & Francis

    Dr Seyyed Ehsan Mirsalehi

  10. Prediction of microstructure and mechanical properties of line pipe welded joints based on hardness map

    Article • Science and Technology of Welding & Joining, January 2016, Maney Publishing

    Dr Seyyed Ehsan Mirsalehi

  11. The effect of substrate's heat treatment on microstructural and mechanical evolution of transient liquid phase bonded IN-738 LC

    Article • Materials & Design, January 2016, Elsevier

    Dr Seyyed Ehsan Mirsalehi

  12. Investigation on microstructure, mechanical properties and corrosion behavior of AISI 316L stainless steel to ASTM A335-P11 low alloy steel dissimilar welding joints

    Article • Materials at High Temperatures, August 2015, Taylor & Francis

    Dr Seyyed Ehsan Mirsalehi

  13. Filling exit holes of friction stir welding lap joints using consumable pin tools

    Article • Science and Technology of Welding & Joining, April 2015, Taylor & Francis

    Dr Seyyed Ehsan Mirsalehi

  14. Effect of Post-Weld Heat Treatment on Microstructure and Mechanical Properties of X52 Linepipe HFIW Joints

    Article • Journal of Materials Engineering and Performance, February 2015, Springer Science + Business Media

    Dr Seyyed Ehsan Mirsalehi

  15. Thermodynamic modelling of wetting in a B 4 C/Ni–Cr–Si system

    Article • Modelling and Simulation in Materials Science and Engineering, November 2010, Institute of Physics Publishing

    Dr Seyyed Ehsan Mirsalehi

  16. Study of interface interactions in B4C/Ni–Cr–Si system

    Article • Applied Surface Science, November 2010, Elsevier

    Dr Seyyed Ehsan Mirsalehi

  17. Fatigue life estimation of spot welds using a crack propagation-based method with consideration of residual stresses effect

    Article • Materials Science and Engineering A, September 2010, Elsevier

    Dr Seyyed Ehsan Mirsalehi

  18. Investigation on wetting behaviour of B4C by Ni based brazing alloys

    Article • Science and Technology of Welding & Joining, January 2010, Taylor & Francis

    Dr Seyyed Ehsan Mirsalehi