All Stories

  1. Reaction Mechanisms During Melting of H-DRI Focusing on Slag Formation and the Behavior of Vanadium
  2. The Effect of the Endothermic Reaction Nature on the Iron Ore Pellet Reduction Using Hydrogen
  3. Impact of Solid Particles and Liquid Droplets on Foams – Cold Model and High Temperature Experiments
  4. The Laboratory Study of Metallurgical Slags and the Reality
  5. Experimental study on hydrogen reduction of industrial fines in fluidized bed
  6. Effect of Reduction Degree on Characteristics of Slag Formed by Melting Hydrogen‐Reduced DRI and Partitions of P and V between Slag and Metal
  7. Phase relationship in the system MgO-V2O3 between 1661 and 1873 K at PO2=(3.55±0.2)×10-6 and (3.55±0.3)×10-5 Pa
  8. Decarburization of Pig Iron in Synthetic BOF Converter Slag
  9. Lime Dissolution in Foaming BOF Slag
  10. Experimental study of the phase relationships in the SiO2–SrO–Al2O3 system
  11. Experimental study of the phase relationships in the SrO-SiO2 system
  12. A Semi-Empirical Model of Particle Velocity in Foam
  13. Sulfide Capacities in the Al2O3–CaO–MgO–SiO2 System
  14. A New Experimental Design to Study the Kinetics of Solid Dissolution into Liquids at Elevated Temperature
  15. Dissolution of MgO based refractories in CaO-Al2O3-MgO-SiO2 slag
  16. The structure of foaming BOF-converter slag
  17. Vanadium Extraction from a Fe–V (2.0 Mass%)–P (0.1 Mass%) Melt and Investigation of the Phase Relations in the Formed FeO–SiO2-Based Slag with 20 Mass% V
  18. Experimental Study on the Activities of Al and Ca in Ferrosilicon
  19. Experimental determination of sulphide capacities of blast furnace slags with higher MgO contents
  20. Study on the Equilibrium Between Liquid Iron and Calcium Vapor
  21. Experimental and Modeling Study on Reduction of Hematite Pellets by Hydrogen Gas
  22. Study on the Equilibrium of Slag and Hot Metal at Tapping with Respect to Sulfur
  23. The Effect of Al2O3, CaO and SiO2 on the Phase Relationship in FeO–SiO2 Based Slag with 20 Mass% Vanadium
  24. Effect of Experimental Conditions on Cementite Formation During Reduction of Iron Ore Pellets
  25. Study on the Kinetics of Aluminum Removal from Liquid Silicon to Slag with Mechanical Stirring
  26. Study on Apparent Viscosity and Structure of Foaming Slag
  27. Effect of Refractory on Nonmetallic Inclusions in Al-Killed Steel
  28. The Effect of Oxygen Potential on the Sulfide Capacity for Slags Containing Multivalent Species
  29. Improvement of Resistance to Slag Penetration in Magnesia-Based Refractory with Colloidal Alumina Addition II by Means of a Proper Particle Size Distribution of MgO
  30. Attachment of Alumina on the Wall of Submerged Entry Nozzle During Continuous Casting of Al-Killed Steel
  31. Study on Apparent Viscosity of Foaming Slag - Cold Model and High Temperature Experiments
  32. Investigation of Selective Reduction of Iron Oxide in Zinc Ferrite by Carbon and Hydrogen
  33. Study on the Effect of Aging on the Ability of Calcium Carbide for Hot Metal Desulfurization
  34. Effects of Temperature and Holding Time on the Sintering of Ladle Filler Sand with Liquid Steel
  35. Study of Chromium Oxide Activities in EAF Slags
  36. Sulfide Capacity in Ladle Slag at Steelmaking Temperatures
  37. Effect of carbon on the solubility of nitrogen in slag
  38. Study on Apparent Viscosity of Foam and Droplet Movement Using a Cold Model
  39. Reply to the “Discussion of Determination of Activities of Niobium in Cu-Nb Melts Containing Dilute Nb”
  40. Mechanism Study of the Blocking of Ladle Well Due to Sintering of Filler Sand
  41. Possibility of Sulfur Removal from Ladle Slag by Oxidation in the Temperature Range 1373–1673 K
  42. Determination of Activities of Niobium in Cu-Nb Melts Containing Dilute Nb
  43. Effect of Stirring Practice on Sulphur and Nitrogen Refining as well as Inclusion Removal in Ladle Treatment
  44. Improvement of Resistance of MgO-Based Refractory to Slag Penetration by In Situ Spinel Formation
  45. Determination of the vanadium solubility in the Al2O3–CaO(25mass%)–SiO2 system
  46. Determination of Vanadium Solubility in the Al2O3-CaO(30 Mass Pct)-SiO2 and Al2O3-CaO(35 Mass Pct)-SiO2 System
  47. Kinetic Study on Desulfurization of Hot Metal Using CaO and CaC2
  48. Mass Transfer in Slag Refining of Silicon with Mechanical Stirring: Transient Kinetics of Ca and B Transfer
  49. Hydrogen pick-up after vacuum degassing
  50. Study on Desulfurization Abilities of Some Commonly Used Desulfurization Agents
  51. Attachment of Liquid Calcium Aluminate Inclusions on Inner Wall of Submerged Entry Nozzle during Continuous Casting of Calcium-Treated Steel
  52. Mass Transfer in Slag Refining of Silicon with Mechanical Stirring: Transient Interfacial Phenomena
  53. Dissolution mechanism of dolomite in converter slag at 1873 K
  54. Study on Direct Reduction of Hematite Pellets Using a New TG Setup
  55. Reactions Between Silicon and Graphite Substrates at High Temperature: In Situ Observations
  56. A Study of Nitrogen Pickup from the Slag during Waiting Time of Ladle Treatment
  57. Functions of Mg and Mg–CaO Mixtures in Hot Metal Desulfurization
  58. Capacities of some CaO–SiO2–FeO–MnO–MgO slags and slag–solid mixtures in capturing phosphorous
  59. The thermodynamics of boron extraction from liquid silicon using SiO2–CaO–MgO slag treatment
  60. Determination of Experimental Conditions for Applying Hot Wire Method to Thermal Conductivity of Slag
  61. Boron partitioning between SiO2–CaO–MgO slags and liquid silicon at controlled nitrogen potential
  62. Thermal Conductivity Measurements of Ladle Slag Using Transient Hot Wire Method
  63. Limestone Dissolution in Converter Slag at 1873 K (1600 °C)
  64. Study on the Possibility of Using ZnO for Hot Metal Desulfurization
  65. Study on the Possibility of Using ZnO to Increase the Desulfurization Potential of Blast Furnace Slag and Sulfide Capacities
  66. Modeling Related to Secondary Steel Making
  67. Study of Penetration Depth and Droplet Behavior in the Case of a Gas Jet Impinging on the Surface of Molten Metal using Liquid Ga–In–Sn
  68. Activity of magnesium in liquid Ag–Mg alloys
  69. Experimental Design for the Mechanism Study of Lime Dissolution in Liquid Slag
  70. New approach towards dynamic modelling of dephosphorisation in converter process
  71. Study of Lime Dissolution Under Forced Convection
  72. Effect of ladle slag of previous heat on number of non-metallic inclusions in ladle treatment of tool steel
  73. Thermal Modelling of the Ladle Preheating Process
  74. Experimental Determination of Mg Activities in Fe-Mg Solutions
  75. The Effect of Calcium Fluoride on Slag Viscosity
  76. Experimental determination of the liquidus in the high basicity region in the Al2O3(30 mass%) - CaO - MgO - SiO2 system
  77. Experimental Determination of the Liquidus in the High-Basicity Region in the Al2O3(25 mass pct)-CaO-MgO-SiO2 and Al2O3(35 mass pct)-CaO-MgO-SiO2 Systems
  78. Mechanism study on formation and chemical changes of calcium aluminate inclusions containing SiO2in ladle treatment of tool steel
  79. Fluid Flow and Heat Transfer in the Ladle during Teeming
  80. Observation on Physical Growth of Nonmetallic Inclusion in Liquid Steel During Ladle Treatment
  81. The Effect of Solid Particles on Liquid Viscosity
  82. Viscosities of the Quaternary Al2O3-CaO-MgO-SiO2 Slags
  83. Physical and mathematical modelling of argon shroud for protection of steel stream during casting
  84. Effect of Inert Gas Flow Rate on Homogenization and Inclusion Removal in a Gas Stirred Ladle
  85. Development of an Analytical Technique to Determine the Fractions of Vanadium Cations with Different Valences in Slag
  86. Modelling of slag foaming
  87. Oxygen Penetration in the Protection Shroud in Steel Casting
  88. Flow pattern in ingot during mould filling and its impact on inclusion removal
  89. Study of Open Eye Formation in an Argon Stirred Ladle
  90. Dissolution of Lime in Synthetic ‘FeO’‐SiO2 and CaO‐‘FeO’‐SiO2 Slags
  91. Possibility of Selective Oxidation of Vanadium from Iron and Phosphorus in Fe‐V‐P Melt
  92. Effects of slag composition and cooling rate on formation of glaze on MgO refractory
  93. Inclusions Generated during Ingot Casting of Tool Steel
  94. A Kinetic Study of Nickel Deposition on Spherical Silica Particles and Viscose Fibers by Chemical Plating
  95. Aluminum Deoxidation Equilibrium of Molten Iron–Aluminum Alloy with Wide Aluminum Composition Range at 1 873 K
  96. A study on oxide scale formation of low carbon steel using thermo gravimetric technique
  97. Thermodynamic consideration and experimental study on the preparation of heat-treated hollow nickel fibres
  98. Development of an Analytical Technique to Quantify Cr2+ and Cr3+ in Metallurgical Slags
  99. Origins of Non-metallic Inclusions and their Chemical Development during Ladle Treatment
  100. Nickel coating on some organic and carbon fibres by chemical plating
  101. Study on the Formation of Open‐Eye and Slag Entrainment in Gas Stirred Ladle
  102. A kinetic study of nickel coating on boron nitride micro-particles
  103. Water Capacity Model of Al2O3‐CaO‐MgO‐SiO2 Quaternary Slag System
  104. Study of inclusion removal mechanism around open eye in ladle treatment
  105. Concentrating of vanadium oxide in vanadium rich phase(s) by addition of SiO2in converter slag
  106. Activities of SiO2 in Some CaO-Al2O3-SiO2(-10%MgO) Melts with Low SiO2 Contents at 1873K
  107. Study of slag/metal interface in ladle treatment
  108. Existence of a solid solution between 3CaO·V2O5 and 3CaO·P2O5
  109. Mechanism Study on the Formation of Liquid Calcium Aluminate Inclusion from MgO‐Al2O3 Spinel
  110. Chemical characterisation of non-metallic inclusions during casting of hot work die steel
  111. Water vapor solubility in ladle-refining slags
  112. A new approach for the study of slag–metal interface in steelmaking
  113. Characterization of Melting of Some Slags in the Al2O3–CaO–MgO–SiO2 Quaternary System
  114. Improving process design in steelmaking
  115. Viscosities of Slags ‐ an Overview
  116. Improving process design in steelmaking
  117. Non‐metallic inclusions in the ingot and final products of a medium‐carbon tool steel
  118. Impact of slag–refractory lining reactions on the formation of inclusions in steel
  119. Ladle glaze: major source of oxide inclusions during ladle treatment of steel
  120. Effect of ladle age on formation of non-metallic inclusions in ladle treatment
  121. Static and Dynamic Thermophysical Property Measurements at High Temperature
  122. Experimental study of the nucleation of alumina inclusions in liquid steel
  123. Reduction kinetics of Fe2MoO4 fine powder by hydrogen in a fluidized bed
  124. Chemical characteristics of inclusions formed at various stages during the ladle treatment of steel
  125. Reduction of Fe2MoO4 by hydrogen gas
  126. Mathematical model to simulate the temperature and composition distribution inside the flux layer of a continuous casting mould
  127. Abating environmentally harmful waste gases
  128. Kinetic studies of the oxidation of γ-aluminum oxynitride
  129. Slag corrosion of gamma aluminium oxynitride
  130. The Existence of a Ternary Phase in the Al2O3-CaO-FeO System.
  131. The Effect of Addition of Al2O3 on the Viscosity of CaO-"FeO"-SiO2-CaF2 Slags.
  132. An experimental study of the viscosities of Al2O3-CaO-“FeO” slags
  133. Thermodynamic model calculations in multicomponent liquid silicate systems
  134. Study of the deoxidation of steel with aluminum wire injection in a gas-stirred ladle
  135. Effect of interfacial energy on the viscosities of two-phase mixtures—A physical modeling approach
  136. Modelling study of slag foaming by chemical reaction
  137. Modelling study of slag foaming by chemical reaction
  138. Viscosity Measurements on Some Fayalite Slags.
  139. Viscosity estimation models for ternary slags
  140. Interfacial phenomena in some slag-metal reactions
  141. Thermodynamic description of Al2O3CaOMnO and Al2O3FeOMnO mets - a model approach
  142. Investigation of the kinetics of reductionof manganese tungstate by hydrogen
  143. Investigation on reduction of CoAl2O4 by hydrogen gas using TGA
  144. Investigation of the Reduction of ZnWO4 by Hydrogen Gas
  145. Modelling study of slag foaming phenomenon
  146. Intrinsic reduction kinetics of cobalt- and nickel-titanates by hydrogen
  147. Estimation of viscosities of ternary silicate melts using the excess gibbs energy of mixing
  148. Estimation of liquidus temperatures for multicomponent silicates from activation energies for viscous flow
  149. Thermodynamic Description of 'FeO'-MgO-SiO2 and 'FeO'-MnO-SiO2 Melts - a Model Approach
  150. A study of the sulfide capacities of iron-oxide containing slags
  151. The computer-based study of multicomponent slag viscosities
  152. Experimental studies of viscosities of some CaO–CaF2–SiO2slags
  153. Thermodynamic Description of CaO-'FeO'-SiO2 and CaO-MnO-SiO2 Melts - a Model Approach
  154. Estimation of escape rate of volatile components from slags containing CaF2 during viscosity measurement
  155. Viscosities of Some Fayalitic Slags Containing CaF2.
  156. Sulphide Capacities of "FeO"-SiO2, CaO-"FeO", and "FeO"-MnO Slags.
  157. Reduction of FeWO4-NiWO4 solid solutions by hydrogen gas
  158. Sulphide Capacities in Some Multi Component Slag Systems.
  159. A New Approach to Model Sulphur Refining in a Gas-stirred Ladle. A Coupled CFD and Thermodynamic Model.
  160. The intrinsic thermal decomposition kinetics of SrCO3 by a nonisothermal technique
  161. Determination of kinetic parameters using differential thermal analysis—Application to the decomposition of CaCO3
  162. Experimental studies of the viscosities in the CaO-Fe n O-SiO2 slags
  163. Viscosities of High Temperature Systems. A Modelling Approach.
  164. Viscosities of LF Slags and Their Impact on Ladle Refining.
  165. Application of the high-temperature x-ray diffraction method to the diffusion study in the MgO-AI2O3 system
  166. Sulphide Capacities of CaO-Al2O3 Slags in the Temperature Range 1773-1848 K.
  167. A study of the thermal decomposition of BaCO3
  168. Interdissolution kinetics in oxide powder mixture using high-temperature X-ray diffraction technique
  169. Investigation of the Kinetics of Reduction of Iron Titanate (FeTiO3) by Hydrogen
  170. A mathematical model for estimation of sulphide capacities of multi‐component slags
  171. Application of a QMG-420 mass spectrometer for high temperature studies
  172. Kinetic studies of reduction of CoO and CoWO4 by hydrogen
  173. ChemInform Abstract: Kinetics of Reduction of Nickel Oxide and Nickel Aluminate by Hydrogen.
  174. A thermodynamic study of the molybdenum-oxygen system
  175. Thermodynamic activities of FeO in CaO‐FeO‐SiO2 slags
  176. Optimisation of interaction parameters for GaxIn1−xAsyP1−y solid solutions using gas-solid equilibrium data and a sublattice model
  177. Investigation of the Kinetics of Reduction of Nickel Oxide and Nickel Aluminate by Hydrogen
  178. Estimation of the viscosities of binary metallic melts using Gibbs energies of mixing
  179. A Model for Estimation of Viscosities of Complex Metallic and Ionic Melts
  180. Investigation of the kinetics of reduction of nickel tungstate by hydrogen
  181. A galvanic-cell study of (nickel + tungsten + oxygen) in the temperature range 1034 K to 1317 K
  182. Thermodynamic study of the NiO-MgO System in the temperature range 1073 to 1473 K by a galvanic cell technique
  183. An Evaluation of the Stabilities of the Ternary Compounds at Low Oxygen Potentials in the Ternary System Fe-Na-O
  184. Application of a nonisothermal thermogravimetric method to the kinetic study of the reduction of metallic oxides: Part II. A theoretical treatment of powder bed reduction and its application to the reduction of tungsten oxide by hydrogen
  185. Discussion of “high-temperature thermodynamic properties of the vanadium carbides V2C and VC0.73 determined using a galvanic cell technique”
  186. Application of a nonisothermal thermogravimetric method to the kinetic study of the reduction of metallic oxides: Part I. A general treatment and its application to the reduction of the oxides of molybdenum by hydrogen
  187. Standard gibbs energies of formation of the carbides of vanadium by emf measurements
  188. Standard gibbs energies of formation of the carbides of chromium by emf measurements
  189. Some phase-diagram aspects of the manganese-carbon system
  190. Standard gibbs energies of formation of the carbides of manganese by emf measurements