All Stories

  1. The influence of anion-exchange membrane nanostructure onto ion transport: Adjusting membrane performance through fabrication conditions
  2. Polystyrene Sulfonate Particles as Building Blocks for Nanofiltration Membranes
  3. Progress in alumina ceramic membranes for water purification: Status and prospects
  4. In situ reactive coating of porous filtration membranes with functional polymer layers to integrate boron adsorber property
  5. Thermo-Responsive Hydrophilic Support for Polyamide Thin-Film Composite Membranes with Competitive Nanofiltration Performance
  6. Preparation of N-doped carbon materials from cellulose:chitosan blends and their potential application in electrocatalytic oxygen reduction
  7. Tensile strength deterioration of PVC coated PET woven fabrics under single and multiplied artificial weathering impacts and cyclic loading
  8. Microfiltration of polymeric microgels as soft model colloids through sterile filter membranes
  9. Mixed-Matrix Membrane Adsorbers for the Simultaneous Removal of Different Pharmaceutical Micropollutants from Water
  10. Impact of Climate Change on Drinking Water Safety
  11. Development of Antifouling Polysulfone Membranes by Synergistic Modification with Two Different Additives in Casting Solution and Coagulation Bath: Synperonic F108 and Polyacrylic Acid
  12. Improvement of proton conductivity of magnetically aligned phosphotungstic acid-decorated cobalt oxide embedded Nafion membrane
  13. Enhancing the phase change material properties by an energy-efficient one-step preparation method using organogelator–polyolefin composites
  14. Polyelectrolyte Functionalisation of Track Etched Membranes: Towards Charge-Tuneable Adsorber Materials
  15. Polyzwitterionic hydrogel coating for reverse osmosis membranes by concentration polarization-enhanced in situ “click” reaction that is applicable in modules
  16. Poly(ether sulfone) hollow fiber membranes prepared via nonsolvent‐induced phase separation using the green solvent Agnique® AMD 3 L
  17. Cotton as Precursor for the Preparation of Porous Cellulose Adsorbers
  18. Three-Dimensional Analysis of the Natural-Organic-Matter Distribution in the Cake Layer to Precisely Reveal Ultrafiltration Fouling Mechanisms
  19. Concentration Polarization Enabled Reactive Coating of Nanofiltration Membranes with Zwitterionic Hydrogel
  20. Water Influence on the Uniaxial Tensile Behavior of Polytetrafluoroethylene-Coated Glass Fiber Fabric
  21. Artificial Weathering Mechanisms of Uncoated Structural Polyethylene Terephthalate Fabrics with Focus on Tensile Strength Degradation
  22. Feasibility of graphene–polymer composite membranes for forward osmosis applications
  23. Novel finely structured polymer aerogels using organogelators as a structure-directing component
  24. Soft synthetic microgels as mimics of mycoplasma
  25. Mixed Poiseuille-Knudsen flow model for Gas Liquid Displacement porometry data treatment
  26. Modification of Polysulfone Ultrafiltration Membranes via Addition of Anionic Polyelectrolyte Based on Acrylamide and Sodium Acrylate to the Coagulation Bath to Improve Antifouling Performance in Water Treatment
  27. Tailoring and Remotely Switching Performance of Ultrafiltration Membranes by Magnetically Responsive Polymer Chains
  28. Polymer Nanocomposite Ultrafiltration Membranes: The Influence of Polymeric Additive, Dispersion Quality and Particle Modification on the Integration of Zinc Oxide Nanoparticles into Polyvinylidene Difluoride Membranes
  29. Preparation and characterization of polyzwitterionic hydrogel coated polyamide‐based mixed matrix membrane for heavy metal ions removal
  30. Tailored CNTs Buckypaper Membranes for the Removal of Humic Acid and Separation of Oil-In-Water Emulsions
  31. One-Step Preparation of Antifouling Polysulfone Ultrafiltration Membranes via Modification by a Cationic Polyelectrolyte Based on Polyacrylamide
  32. One-step preparation of porous cellulose/chitosan macro-spheres from ionic liquid-based solutions
  33. Polyethyleneoxide‐ b ‐poly(isopropyl methacrylate) diblock copolymers as novel material for ultrafiltration membranes
  34. Tunable and switchable nanoparticle separation with thermo-responsive track-etched membranes prepared by controlled surface-initiated polymerization of poly(N-isopropylacrylamide)
  35. Influence of Surface Micro-Patterning and Hydrogel Coating on Colloidal Silica Fouling of Polyamide Thin-Film Composite Membranes
  36. Glucose-Responsive Polymeric Hydrogel Materials: From a Novel Technique for the Measurement of Glucose Binding toward Swelling Pressure Sensor Applications
  37. Tailoring Surface Characteristics of Polyamide Thin-Film Composite Membranes toward Pronounced Switchable Wettability
  38. Calorimetric studies of PEO-b-PMMA and PEO-b-PiPMA diblock copolymers synthesized via atom transfer radical polymerization
  39. Potassium-sensitive poly(N-isopropylacrylamide)-based hydrogels for sensor applications
  40. A highly selective protein adsorber via two-step surface-initiated molecular imprinting utilizing a multi-functional polymeric scaffold on a macroporous cellulose membrane
  41. Hollow fiber membrane lumen modified by polyzwitterionic grafting
  42. Assessing biofouling resistance of a polyamide reverse osmosis membrane surface-modified with a zwitterionic polymer
  43. Degradation of Polymeric Brominated Flame Retardants: Development of an Analytical Approach Using PolyFR and UV Irradiation
  44. Erratum to “Capillary pore membranes with grafted diblock copolymers showing reversibly changing ultrafiltration properties with independent response to ions and temperature” [J. Mem. Sci. 514 (2016) 510–517]
  45. Macro-initiator mediated surface selective functionalization of ultrafiltration membranes with anti-fouling hydrogel layers applicable to ready-to-use capillary membrane modules
  46. Improved Antifouling Properties of Polydimethylsiloxane Films via Formation of Polysiloxane/Polyzwitterion Interpenetrating Networks
  47. Magnetoresponsive Poly(ether sulfone)-Based Iron Oxide cum Hydrogel Mixed Matrix Composite Membranes for Switchable Molecular Sieving
  48. Capillary pore membranes with grafted diblock copolymers showing reversibly changing ultrafiltration properties with independent response to ions and temperature
  49. Effect of annealing temperature on pore formation in preparation of advanced polyethylene battery separator membranes
  50. Preparation and characterization of low fouling novel hybrid ultrafiltration membranes based on the blends of GO−TiO2 nanocomposite and polysulfone for humic acid removal
  51. Surface wettability and energy effects on the biological performance of poly-3-hydroxybutyrate films treated with RF plasma
  52. A fast and reliable approach to benchmark low pressure hollow fibre filtration membranes for water purification
  53. Antifouling and Antibacterial Multifunctional Polyzwitterion/Enzyme Coating on Silicone Catheter Material Prepared by Electrostatic Layer-by-Layer Assembly
  54. Membrane-based purification of proteins from nanoparticle dispersions: Influences of membrane type and ultrafiltration conditions
  55. Monoclonal antibody capture from cell culture supernatants using epitope imprinted macroporous membranes
  56. Novel magneto-responsive membrane for remote control switchable molecular sieving
  57. Oxygen and ammonia plasma treatment of poly(3-hydroxybutyrate) films for controlled surface zeta potential and improved cell compatibility
  58. Ultrafiltration membrane-based purification of bioconjugated gold nanoparticle dispersions
  59. Poly(N,N-dimethylaminoethyl methacrylate) Brushes: pH-Dependent Switching Kinetics of a Surface-Grafted Thermoresponsive Polyelectrolyte
  60. Isotropic macroporous polyethersulfone membranes as competitive supports for high performance polyamide desalination membranes
  61. Nano-hydroxyapatite-coated metal-ceramic composite of iron-tricalcium phosphate: Improving the surface wettability, adhesion and proliferation of mesenchymal stem cells in vitro
  62. Ultrafiltration membranes with markedly different pH- and ion-responsivity by photografted zwitterionic polysulfobetain or polycarbobetain
  63. Design of Thermally Responsive Polymeric Hydrogels for Brackish Water Desalination: Effect of Architecture on Swelling, Deswelling, and Salt Rejection
  64. Detoxification of hexavalent chromium in wastewater containing organic substances using simonkolleite-TiO2 photocatalyst
  65. Gating mechanism under pressure
  66. Electropolymerized Molecularly Imprinted Polypyrrole Film for Sensing of Clofibric Acid
  67. Novel functionalization of porous polypropylene microfiltration membranes: via grafted poly(aminoethyl methacrylate) anchored Schiff bases toward membrane adsorbers for metal ions
  68. Nanoporous Polymer Filters and Membranes, Selective Filters
  69. Thin-film composite membranes for organophilic nanofiltration based on photo-cross-linkable polyimide
  70. Routes towards catalytically active TiO2doped porous cellulose
  71. Quaternized polysulfone and graphene oxide nanosheet derived low fouling novel positively charged hybrid ultrafiltration membranes for protein separation
  72. Two step and one step preparation of porous nanocomposite cellulose membranes doped with TiO2
  73. Stable zinc oxide nanoparticle dispersions in ionic liquids
  74. Macroinitiator-mediated photoreactive coating of membrane surfaces with antifouling hydrogel layers
  75. Low fouling negatively charged hybrid ultrafiltration membranes for protein separation from sulfonated poly(arylene ether sulfone) block copolymer and functionalized multiwalled carbon nanotubes
  76. Editorial
  77. Wettability of Thin Silicate-Containing Hydroxyapatite Films Formed by RF-Magnetron Sputtering
  78. Magnetic Fe3O4 nanoparticle heaters in smart porous membrane valves
  79. Novel ultrafiltration membranes with adjustable charge density based on sulfonated poly(arylene ether sulfone) block copolymers and their tunable protein separation performance
  80. Antibody-Imprinted Membrane Adsorber via Two-Step Surface Grafting
  81. Thermoresponsive ultrafiltration membranes for the switchable permeation and fractionation of nanoparticles
  82. Novel antifouling positively charged hybrid ultrafiltration membranes for protein separation based on blends of carboxylated carbon nanotubes and aminated poly(arylene ether sulfone)
  83. Fabrication of Ag/TiO2photocatalyst for the treatment of simulated hospital wastewater under sunlight
  84. ZnO-modified hybrid polymers as an antibacterial finish for textiles
  85. Nanofiltration Separation of Aqueous Polyethyleneglycol – Salt Mixtures
  86. Designing magnetic field responsive nanofiltration membranes
  87. Influence of the cation alkyl chain length of imidazolium-based room temperature ionic liquids on the dispersibility of TiO2 nanopowders
  88. Hofmeister Effect of Sodium Halides on the Switching Energetics of Thermoresponsive Polymer Brushes
  89. Protein-selective adsorbers by molecular imprinting via a novel two-step surface grafting method
  90. Preparation of a silicate-containing hydroxyapatite-based coating by magnetron sputtering: structure and osteoblast-like MG63 cells in vitro study
  91. Advanced ultrafiltration membranes based on functionalized poly(arylene ether sulfone) block copolymers
  92. Rheological studies on PNIPAAm hydrogel synthesis via in situ polymerization and on resulting viscoelastic properties
  93. Tuning the nanofiltration performance of thin film strong polyelectrolyte hydrogel composite membranes by photo-grafting conditions
  94. Toward remote-controlled valve functions via magnetically responsive capillary pore membranes
  95. Toward protein-selective membrane adsorbers: A novel surface-selective photo-grafting method
  96. Synthesis and Characterization of Poly(ethylene glycol) Methacrylate Based Hydrogel Networks for Anti-Biofouling Applications
  97. Surface modification of poly(ethylene terephthalate) fabric via photo-chemical reaction of dimethylaminopropyl methacrylamide
  98. Effect of membrane hydrophilization on ultrafiltration performance for biomolecules separation
  99. Grafting of titanium dioxide microspheres with a temperature-responsive polymer via surface-initiated atom transfer radical polymerization without the use of silane coupling agents
  100. Molecularly imprinted stimuli-responsive hydrogels for protein recognition
  101. Novel Membrane Adsorbers with Grafted Zwitterionic Polymers Synthesized by Surface-Initiated ATRP and Their Salt-Modulated Permeability and Protein Binding Properties
  102. UV-Photo Graft Functionalization of Polyethersulfone Membrane with Strong Polyelectrolyte Hydrogel and Its Application for Nanofiltration
  103. Dispersions of Various Titania Nanoparticles in Two Different Ionic Liquids
  104. Performance of Thin-Layer Hydrogel Polyethersulfone Composite Membranes during Dead-End Ultrafiltration of Various Protein Solutions
  105. Cross-flow ultrafiltration of protein solutions through unmodified and surface functionalized polyethersulfone membranes – Effect of process conditions on separation performance
  106. Factors affecting the sieving behavior of anti-fouling thin-layer cross-linked hydrogel polyethersulfone composite ultrafiltration membranes
  107. Dispersions of silica nanoparticles in ionic liquids investigated with advanced rheology
  108. Systematic Investigation of Dispersions of Unmodified Inorganic Nanoparticles in Organic Solvents with Focus on the Hansen Solubility Parameters
  109. Novel hydrogel pore-filled composite membranes with tunable and temperature-responsive size-selectivity
  110. ZnO Nanoparticles-Chitosan Composite as Antibacterial Finish for Textiles
  111. Influence of alkyl chain length and molecular weight on the surface functionalization via adsorption/entrapment with biocidal cationic block copolymers
  112. Ultrafiltration of humic acid solutions through unmodified and surface functionalized low-fouling polyethersulfone membranes – Effects of feed properties, molecular weight cut-off and membrane chemistry on fouling behavior and cleanability
  113. Chemical and Physical Factors in Design of Antibiofouling Polymer Coatings
  114. Stimuli–responsive track-etched membranes via surface-initiated controlled radical polymerization: Influence of grafting density and pore size
  115. Magnetically Activated Micromixers for Separation Membranes
  116. Untersuchungen zur intrinsischen Schaltkinetik ultradünner thermoresponsiver Polymerbürsten
  117. Probing the Intrinsic Switching Kinetics of Ultrathin Thermoresponsive Polymer Brushes
  118. Preparation of thermo-responsive polypropylene membranes via surface entrapment of poly(N-isopropylacrylamide)-containing macromolecules
  119. Cylindrical Membrane Pores with Well-Defined Grafted Linear and Comblike Glycopolymer Layers for Lectin Binding
  120. Separation Membranes
  121. Porous Polymer Membranes by Manufacturing Technologies other than Phase Separation of Polymer Solutions
  122. Porous Flat Sheet, Hollow Fibre and Capsule Membranes by Phase Separation of Polymer Solutions
  123. Composites of functional polymeric hydrogels and porous membranes
  124. Amphiphilic gold nanoparticles: Synthesis, characterization and adsorption to PEGylated polymer surfaces
  125. Photo-chemical Surface Modification for the Control of Protein Adsorption on Textile Substrates
  126. Grafted Glycopolymer-Based Receptor Mimics on Polymer Support for Selective Adhesion of Bacteria
  127. Functional coatings for anti-biofouling applications by surface segregation of block copolymer additives
  128. The effects of (macro)molecular structure on hydrophilic surface modification of polypropylene membranes via entrapment
  129. Tuning the ultrafiltration properties of anti-fouling thin-layer hydrogel polyethersulfone composite membranes by suited crosslinker monomers and photo-grafting conditions
  130. Zur photochemisch induzierten Wolff-Umlagerung cyclischer 2-Diazo-1, 3-dicarbonylverbindungen
  131. Zur Photolyse von 2-Diazocyclohexan-1,3-dionen in polymeren Schichten
  132. ChemInform Abstract: Positionally Addressable Parallel Synthesis on Continuous Membranes
  133. Model Based Quantification of Internal Flow Distributions from Breakthrough Curves of Flat Sheet Membrane Chromatography Modules
  134. Anti-nonspecific Protein Adsorption Properties of Biomimetic Glycocalyx-like Glycopolymer Layers: Effects of Glycopolymer Chain Density and Protein Size
  135. Surface modification of polypropylene microfiltration membrane via entrapment of an amphiphilic alkyl oligoethyleneglycolether
  136. Fouling effects of humic and alginic acids in nanofiltration and influence of solution composition
  137. Fouling control in sugarcane juice ultrafiltration with surface modified polysulfone and polyethersulfone membranes
  138. Surface-Initiated Polymerization on Laser-Patterned Templates: Morphological Scaling of Nanoconfined Polymer Brushes
  139. Block Copolymer Photo-Grafted Poly(Ethylene Terephthalate) Capillary Pore Membranes Distinctly Switchable by Two Different Stimuli
  140. Synthesis of block copolymers for surface functionalization with stimuli-responsive macromolecules
  141. High performance polyethersulfone microfiltration membranes having high flux and stable hydrophilic property
  142. Influence of pore structure and architecture of photo-grafted functional layers on separation performance of cellulose-based macroporous membrane adsorbers
  143. Fouling in microfiltration of wine: The influence of the membrane polymer on adsorption of polyphenols and polysaccharides
  144. Double Stimuli-Responsive Ultrafiltration Membranes from Polystyrene- block -poly( N , N -dimethylaminoethyl methacrylate) Diblock Copolymers
  145. Tailored “Grafting-From” Functionalization of Microfiltration Membrane Surface Photo-Initiated by Immobilized Iniferter
  146. Influences of solution chemistry and polymeric natural organic matter on the removal of aquatic pharmaceutical residuals by nanofiltration
  147. Self-Supporting, Double Stimuli-Responsive Porous Membranes From Polystyrene-block-poly(N,N-dimethylaminoethyl methacrylate) Diblock Copolymers
  148. Effect of synthesis composition on the swelling pressure of polymeric hydrogels
  149. Cylindrical Pores Responding to Two Different Stimuli via Surface-Initiated Atom Transfer Radical Polymerization for Synthesis of Grafted Diblock Copolymers
  150. Fouling behavior of aqueous solutions of polyphenolic compounds during ultrafiltration
  151. Characteristics, performance and stability of polyethersulfone ultrafiltration membranes prepared by phase separation method using different macromolecular additives
  152. Protein adsorbers from surface-grafted copolymers with selective binding sites
  153. Structure variations of the grafted functional polymer brush enhance membrane adsorber performance
  154. Photo-irradiation for preparation, modification and stimulation of polymeric membranes
  155. Simultaneous Determination of the Micro-, Meso-, and Macropore Size Fractions of Porous Polymers by a Combined Use of Fourier Transform Near-Infrared Diffuse Reflection Spectroscopy and Multivariate Techniques
  156. Ultrafiltration of polysaccharide–protein mixtures: Elucidation of fouling mechanisms and fouling control by membrane surface modification
  157. Detailed analysis of membrane adsorber pore structure and protein binding by advanced microscopy
  158. Synthesis and Performance of PP Microfiltration Membranes Grafted with Polymer Layers of Different Structure
  159. High-performance thin-layer hydrogel composite membranes for ultrafiltration of natural organic matter
  160. Preparation and characterization of porous anion-exchange membrane adsorbers with high protein-binding capacity
  161. Polypropylene-based membrane adsorbers via photo-initiated graft copolymerization: Optimizing separation performance by preparation conditions
  162. Surface-initiated atom transfer radical polymerization: A new method for preparation of polymeric membrane adsorbers
  163. Sugarcane juice ultrafiltration: FTIR and SEM analysis of polysaccharide fouling
  164. Influence of the strongly anisotropic cross-section morphology of a novel polyethersulfone microfiltration membrane on filtration performance
  165. Controlled Pore Functionalization of Poly(ethylene terephthalate) Track-Etched Membranes via Surface-Initiated Atom Transfer Radical Polymerization
  166. Synergist Immobilization Method for Photo-Grafting: Factors Affecting Surface Selectivity
  167. Preparation and Characterization of Novel Solvent-Resistant Nanofiltration Composite Membranes Based on Crosslinked Polyurethanes
  168. Photografted Thin Polymer Hydrogel Layers on PES Ultrafiltration Membranes:  Characterization, Stability, and Influence on Separation Performance
  169. Dextran fouling of polyethersulfone ultrafiltration membranes—Causes, extent and consequences
  170. Towards Nanoporous Membranes based on ABC Triblock Terpolymers
  171. Effect of Surface Modification on the Synthesis of Pore-Filling Polymeric Monoliths in Microfiltration Membranes Made from Poly(propylene) and Poly(ethylene terephthalate)
  172. Via surface functionalization by photograft copolymerization to low-fouling polyethersulfone-based ultrafiltration membranes
  173. Polymere Hydrogele in der Abdichtungstechnik – Untersuchungen zum Quellungsdruck
  174. Method and Model for the Analysis of Gel-Blocking Effects during the Swelling of Polymeric Hydrogels
  175. Permeability and Electrokinetic Characterization of Poly(ethylene terephthalate) Capillary Pore Membranes with Grafted Temperature-Responsive Polymers †
  176. Enantio-selective MIP “nano-monolith” composite membranes
  177. Insights into polysaccharide fouling of ultrafiltration membranes
  178. Performance of surface modified polyethersulfone membranes for ultrafiltration of aquatic humic substances
  179. Functionalized track-etched membranes as versatile tool to investigate stimuli-responsive polymers for “smart” nano- and microsystems
  180. Toward nanoporous composite membranes with tailored block copolymers as selective layer
  181. Effects of photo-initiation and monomer composition onto performance of graft-copolymer based membrane adsorbers
  182. Covalently coupled nanoparticles in capillary pores as enzyme carrier and as turbulence promoter to facilitate enzymatic polymerizations in flow-through enzyme–membrane reactors
  183. Characterizing solute binding to macroporous ion exchange membrane adsorbers using confocal laser scanning microscopy
  184. Oberflächenmodifikationen
  185. Macroporous Poly(N-isopropylacrylamide) Hydrogels with Adjustable Size “Cut-off” for the Efficient and Reversible Immobilization of Biomacromolecules
  186. Deposition of functionalized calcium phosphate nanoparticles on functionalized polymer surfaces
  187. Advanced functional polymer membranes
  188. Polymeric membrane fouling in sugarcane juice ultrafiltration: role of juice polysaccharides
  189. Propylene/1-Hexene Copolymer as a Tailor-Made Poly(propylene) for Membrane Preparation via the Thermally Induced Phase Separation (TIPS) Process
  190. Surface-selective photo-grafting on porous polymer membranes via a synergist immobilization method
  191. Influence of ultrafiltration membrane characteristics on adsorptive fouling with dextrans
  192. Syndiotactic polypropylene as potential material for the preparation of porous membranes via thermally induced phase separation (TIPS) process
  193. Size-Selective Protein Adsorption to Polystyrene Surfaces by Self-Assembled Grafted Poly(ethylene Glycols) with Varied Chain Lengths
  194. Electrochemical and Other Transport Properties of Nanoporous Track-Etched Membranes Studied by the Current Switch-Off Technique
  195. Porous Polypropylene Membranes with Different Carboxyl Polymer Brush Layers for Reversible Protein Binding via Surface-Initiated Graft Copolymerization
  196. Surface Modification of Polypropylene Microporous Membranes with a Novel Glycopolymer
  197. Surface modification of polypropylene microfiltration membranes by the immobilization of poly(N-vinyl-2-pyrrolidone): a facile plasma approach
  198. Photoreactive Functionalization of Poly(ethylene terephthalate) Track-Etched Pore Surfaces with ?Smart? Polymer Systems
  199. Insights into the mechanism of molecular imprinting by immersion precipitation phase inversion of polymer blends via a detailed morphology analysis of porous membranes
  200. Thin, highly crosslinked polymer layer synthesized via photoinitiated graft copolymerization on a self-assembled-monolayer-coated gold surface
  201. Comparison of thin-layer and bulk MIPs synthesized by photoinitiatedin situ crosslinking polymerization from the same reaction mixtures
  202. Molecularly Imprinted Polymer Films and Membranes
  203. Evaluation of molecularly imprinted polymer blend filtration membranes under solid phase extraction conditions
  204. Membrane separations using molecularly imprinted polymers
  205. Molecular imprinting of cellulose acetate-sulfonated polysulfone blend membranes for Rhodamine B by phase inversion technique
  206. ELI_CAP-Affinitätsmembran und Immobilisierungsmatrix für Life Sciences-Anwendungen
  207. Affinity Membranes as a Tool for Life Science Applications
  208. Polymerization of Glucans by Enzymatically Active Membranes
  209. Surface functionalized microfiltration membranes for affinity separation
  210. Molecularly imprinted composite membranes for selective binding of desmetryn from aqueous solutions
  211. Novel molecularly imprinted polymer (MIP) composite membranes via controlled surface and pore functionalizations
  212. Preparation and characterization of a novel solvent-resistant and autoclavable polymer membrane
  213. Impedometric herbicide chemosensors based on molecularly imprinted polymers
  214. Thin layer molecularly imprinted microfiltration membranes by photofunctionalization using a coated α-cleavage photoinitiator
  215. Molecularly imprinted polymer membranes for substance-selective solid-phase extraction from water by surface photo-grafting polymerization
  216. Intermolecular Forces between a Protein and a Hydrophilic Modified Polysulfone Film with Relevance to Filtration
  217. Surface Functionalization of Porous Polypropylene Membranes with Molecularly Imprinted Polymers by Photograft Copolymerization in Water
  218. Optimizing Cell−Surface Interactions by Photografting of Poly(ethylene glycol)
  219. Novel enzyme-membrane reactor for polysaccharide synthesis
  220. Receptor and transport properties of imprinted polymer membranes – a review
  221. Synthesis of photoreactive -4-azidobenzoyl--methoxy-poly(ethylene glycol)s and their end-on photo-grafting onto polysulfone ultrafiltration membranes
  222. Synthesis of photoreactiveα-4-azidobenzoyl-ω-methoxy-poly(ethylene glycol)s and their end-on photo-grafting onto polysulfone ultrafiltration membranes
  223. Synthesis of photoreactive α-4-azidobenzoyl-ω-methoxy-poly(ethylene glycol)s and their end-on photo-grafting onto polysulfone ultrafiltration membranes
  224. Ultrafiltration membrane surfaces with grafted polymer ‘tentacles’: preparation, characterization and application for covalent protein binding
  225. Chemically and morphologically defined ultrafiltration membrane surfaces prepared by heterogeneous photo-initiated graft polymerization
  226. Novel high performance photo-graft composite membranes for separation of organic liquids by pervaporation
  227. Intermolecular Forces between Proteins and Polymer Films with Relevance to Filtration
  228. Polyacrylonitrile enzyme ultrafiltration membranes prepared by adsorption, cross-linking, and covalent binding
  229. Novel photochemical surface functionalization of polysulfone ultrafiltration membranes for covalent immobilization of biomolecules
  230. Photograft-polymer-modified microporous membranes with environment-sensitive permeabilities
  231. Photo-bromination and photo-induced graft polymerization as a two-step approach for surface modification of polyacrylonitrile ultrafiltration membranes
  232. Immobilization of enzymes in photochemically cross-linked polyvinyl alcohol
  233. Photo-induced graft polymerization surface modifications for the preparation of hydrophilic and low-proten-adsorbing ultrafiltration membranes
  234. Immobilization of enzymes onto modified polyacrylonitrile membranes: Application of the acyl azide method
  235. Immobilization of enzymes onto modified polyacrylonitrile membranes: Application of the acyl azide method
  236. Surface modification of ultrafiltration membranes by low temperature plasma II. Graft polymerization onto polyacrylonitrile and polysulfone
  237. ESR studies of chemically modified and photocrosslinked poly(vinyl alcohol) gels
  238. Surface modification of ultrafiltration membranes by low temperature plasma. I. Treatment of polyacrylonitrile
  239. Gas-phase photoinduced graft polymerization of acrylic acid onto polyacrylonitrile ultrafiltration membranes
  240. FT-IR spectroscopic investigations of photochemical grafting of amphiphiles onto polyacrylonitrile surfaces
  241. Reactions of primary amines and alcohols with 4-toluoyl azide
  242. Photomodifizierung von Ultrafiltrationsmembranen, 1. Photochemiche Modifizierungen von Polyacrylnitril-Ultrafiltrationsmembranen mit Arylaziden
  243. Photomodifizierung von Ultrafiltrationsmembranen, 2. Ultrafiltrationseigenschaften von mit Arylaziden photochemisch modifizierten Polyacrylnitril-membranen
  244. Transport and reaction behavior of invertase ultrafiltration membranes made from substituted polysulfone
  245. Crystal and molecular structure of 2-diazo-5-phenyl-cyclohexan-1,3-dione
  246. Crystal and molecular structure of 5-diazo-2,2-dimethyl-4,6-dioxo-1,3-dioxane and 5-diazo-1,3-dimethylpyrimidin-2,4,6-trione
  247. Photochemisch induzierte Reaktionen von 5-Diazobarbitursäuren in Lösung
  248. Polymeric Membranes for Molecular Separations