All Stories

  1. Grain growth during reheating of HSLA steels with a narrow segregation separation

    Article • Materials Science and Technology, August 2019, Taylor & Francis

    Dr Martin Strangwood

  2. Interdendritic microsegregation development of high-strength low-alloy steels during continuous casting process

    Article • Materials Science and Technology, June 2019, Taylor & Francis

    Dr Martin Strangwood

  3. Grain growth on reheating for an as-cast Al-Nb-containing steel with segregated composition

    Article • Materials Science and Technology, February 2019, Taylor & Francis

    Dr Martin Strangwood

  4. Characterisation of Precipitation and Coarsening of Carbides during Tempering in a Low Alloyed Quenched and Tempered Steel

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    Dr Martin Strangwood

  5. Effect of Tempering on Hardness of Q&T Steel Plate

    Article • Materials Science Forum, December 2018, Trans Tech Publications

    Dr Martin Strangwood

  6. Grain growth behaviour on reheating Al–Nb-containing steel in the homogenised condition

    Article • Materials Science and Technology, December 2017, Taylor & Francis

    Dr Martin Strangwood

  7. Quantification of the phase fraction in steel using an electromagnetic sensor

    Article • NDT & E International, October 2014, Elsevier

    Dr Martin Strangwood

  8. Elemental segregation and subsequent precipitation during solidification of continuous cast Nb–V–Ti high-strength low-alloy steels

    Article • Materials Characterization, September 2014, Elsevier

    Dr Martin Strangwood

  9. Non-destructive characterisation of N/Al level in P91 steels using electromagnetic sensors

    Article • Materials Science and Technology, August 2014, Taylor & Francis

    Dr Martin Strangwood

  10. Modelling High Integrity Steel Forgings for Turbine Applications in the Power Generation Industry

    Article • Advanced Materials Research, May 2014, Trans Tech Publications

    Dr Martin Strangwood

  11. Stereological Analysis of the Microstructural Inhomogeneities in Direct-Chill Cast and Continuous-Cast Aluminium-Magnesium Alloy (AA5754)

    Article • Practical Metallography, February 2014, Carl Hanser Verlag

    Dr Martin Strangwood

  12. Fractal based correlations for Nb microalloyed steel undergoing static recrystallization

    Article • Materials Characterization, November 2013, Elsevier

    Dr Martin Strangwood

  13. Characterisation and Modelling of Microsegregation in Low Carbon Continuously Cast Steel Slab

    Article • October 2013, Wiley

    Dr Martin Strangwood

  14. Special issue on winter sports

    Article • Sports Engineering, October 2013, Springer Science + Business Media

    Dr Martin Strangwood

  15. Hydrogen Embrittlement During Corrosion Fatigue of Duplex Stainless Steel

    Article • October 2013, Wiley

    Dr Martin Strangwood

  16. Magnetic Evaluation of Microstructure Changes in 9Cr-1Mo and 2.25Cr-1Mo Steels Using Electromagnetic Sensors

    Article • Metallurgical and Materials Transactions A, August 2013, Springer Science + Business Media

    Dr Martin Strangwood

  17. Modeling the effects of pore arrays on the electrical and mechanical properties of copper

    Article • Journal of Materials Research, July 2013, Springer Science + Business Media

    Dr Martin Strangwood

  18. Non-contact EM measurement of the properties of power station steels taken from service

    Article • May 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Martin Strangwood

  19. Use of misorientation values to further understand deformation in rail steels

    Article • Ironmaking & Steelmaking, February 2013, Taylor & Francis

    Dr Martin Strangwood

  20. Effect of TiN Particles and Grain Size on the Charpy Impact Transition Temperature in Steels

    Article • Journal of Material Science and Technology, October 2012, Elsevier

    Dr Martin Strangwood

  21. Measurement of electromagnetic properties of power station steels

    Article • NDT & E International, October 2012, Elsevier

    Dr Martin Strangwood

  22. Origin and Propagation of Splits in High-Strength Low-Alloy Strip Steel

    Article • Metallurgical and Materials Transactions A, September 2012, Springer Science + Business Media

    Dr Martin Strangwood

  23. Measurement of electromagnetic properties of power station steels

    Article • May 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Martin Strangwood

  24. Coupled thermodynamic/kinetic model for hydrogen transport during electron beam welding of titanium alloy

    Article • Materials Science and Technology, April 2012, Taylor & Francis

    Dr Martin Strangwood

  25. Effect of Strain on Recrystallisation during Hot Deformation of Nb-Containing Microalloyed Steel

    Article • Materials Science Forum, April 2012, Trans Tech Publications

    Dr Martin Strangwood

  26. On the mechanism of porosity formation during welding of titanium alloys

    Article • Acta Materialia, April 2012, Elsevier

    Dr Martin Strangwood

  27. Measurement of microstructure changes in 9Cr–1Mo and 2.25Cr–1Mo steels using an electromagnetic sensor

    Article • Scripta Materialia, March 2012, Elsevier

    Dr Martin Strangwood

  28. Acoustic emission monitoring of split formation during Charpy impact testing of high strength steel

    Article • Materials Science and Technology, February 2012, Taylor & Francis

    Dr Martin Strangwood

  29. Fundamentals of ferrite formation in steels

    Article • January 2012, Elsevier

    Dr Martin Strangwood

  30. Contributor contact details

    Article • January 2012, Elsevier

    Dr Martin Strangwood

  31. Compression set of thermoplastic polyurethane under different thermal–mechanical-moisture conditions

    Article • Polymer Degradation and Stability, December 2011, Elsevier

    Dr Martin Strangwood

  32. Overview of non-destructive evaluation of steel microstructures using multifrequency electromagnetic sensors

    Article • Ironmaking & Steelmaking, October 2011, Taylor & Francis

    Dr Martin Strangwood

  33. Hydrogen Transport and Rationalization of Porosity Formation during Welding of Titanium Alloys

    Article • Metallurgical and Materials Transactions A, September 2011, Springer Science + Business Media

    Dr Martin Strangwood

  34. The static and dynamic stiffness behaviour of composite golf shafts and their constituent materials

    Article • Sports Engineering, July 2011, Springer Science + Business Media

    Dr Martin Strangwood

  35. The Role of Applied Strain on Crystallisation Kinetics of an Amorphous Zr-Based Bulk Metallic Glass

    Article • Solid State Phenomena, June 2011, Trans Tech Publications

    Dr Martin Strangwood

  36. Pinning of Austenite Grain Boundaries by Mixed AlN and Nb(C,N) Precipitates

    Article • Solid State Phenomena, June 2011, Trans Tech Publications

    Dr Martin Strangwood

  37. Bauschinger Effect in Microalloyed Steels: Part II. Influence of Work Softening on Strength Development During UOE Line-Pipe Forming

    Article • Metallurgical and Materials Transactions A, May 2011, Springer Science + Business Media

    Dr Martin Strangwood

  38. Grain Size Distributions after Single Hit Deformation of a Segregated, Commercial Nb-Containing Steel: Prediction and Experiment

    Article • Metallurgical and Materials Transactions A, May 2011, Springer Science + Business Media

    Dr Martin Strangwood

  39. Formability and failure mechanisms of AA2024 under hot forming conditions

    Article • Materials Science and Engineering A, March 2011, Elsevier

    Dr Martin Strangwood

  40. Measurement of decarburisation of steel rods with an electromagnetic sensor using an analytical model

    Article • NDT & E International, November 2010, Elsevier

    Dr Martin Strangwood

  41. Influence of the heating rate on the initiation of primary recrystallization in a deformed Al–Mg alloy

    Article • Scripta Materialia, August 2010, Elsevier

    Dr Martin Strangwood

  42. Novel technologies for large deformable mirrors

    Article • July 2010, SPIE

    Dr Martin Strangwood

  43. Finite element modelling of the quasi-static and dynamic behaviour of a solid sports ball based on component material properties

    Article • Procedia Engineering, June 2010, Elsevier

    Dr Martin Strangwood

  44. The quasi-static and dynamic testing of damping in golf clubs shafts fabricated from carbon fibre composites

    Article • Procedia Engineering, June 2010, Elsevier

    Dr Martin Strangwood

  45. Modelling the electromagnetic response of two-phase steel microstructures

    Article • NDT & E International, June 2010, Elsevier

    Dr Martin Strangwood

  46. Grain Structure Development during Reheating and Deformation of Niobium-Microalloyed Steels

    Article • Materials and Manufacturing Processes, March 2010, Taylor & Francis

    Dr Martin Strangwood

  47. Mechanical Property Development During UOE Forming of Large Diameter Pipeline Steels

    Article • Materials and Manufacturing Processes, March 2010, Taylor & Francis

    Dr Martin Strangwood

  48. Bauschinger Effect in Microalloyed Steels: Part I. Dependence on Dislocation-Particle Interaction

    Article • Metallurgical and Materials Transactions A, March 2010, Springer Science + Business Media

    Dr Martin Strangwood

  49. Modeling of Grain Size Distributions during Single Hit Deformation of a Nb-Containing Steel

    Article • Metallurgical and Materials Transactions A, February 2010, Springer Science + Business Media

    Dr Martin Strangwood

  50. Monitoring microstructure changes in rod online by using induction spectroscopy

    Article • Ironmaking & Steelmaking, February 2010, Taylor & Francis

    Dr Martin Strangwood

  51. A 1-metre Ni coated CFRP demonstrator for large deformable mirrors

    Article • January 2010, EDP Sciences

    Dr Martin Strangwood

  52. Segregation behaviour in Nb microalloyed steels

    Article • Materials Science and Technology, September 2009, Taylor & Francis

    Dr Martin Strangwood

  53. Effect of deformation and Nb segregation on grain size bimodality in HSLA steel

    Article • Materials Science and Technology, August 2009, Taylor & Francis

    Dr Martin Strangwood

  54. Measurement of decarburisation of steel rods with an electromagnetic sensor using an analytical model

    Article • May 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Martin Strangwood

  55. Bauschinger effect in Nb and V alloyed line-pipe steels

    Article • Ironmaking & Steelmaking, April 2009, Taylor & Francis

    Dr Martin Strangwood

  56. Effect of Bimodal Grain Size Distribution on Scatter in Toughness

    Article • Metallurgical and Materials Transactions A, February 2009, Springer Science + Business Media

    Dr Martin Strangwood

  57. Characterization of Decarburization of Steels Using a Multifrequency Electromagnetic Sensor: Experiment and Modeling

    Article • Metallurgical and Materials Transactions A, February 2009, Springer Science + Business Media

    Dr Martin Strangwood

  58. Modelling The Oblique Impact Of Golf Balls (P128)

    Article • January 2009, Springer Science + Business Media

    Dr Martin Strangwood

  59. The Role of Materials and Construction on Hockey Ball Performance (P88)

    Article • January 2009, Springer Science + Business Media

    Dr Martin Strangwood

  60. Development of Texture from the HAZ to Weldmetal Across the Fusion Boundary

    Article • January 2009, Springer Science + Business Media

    Dr Martin Strangwood

  61. Measurement of permeability and ferrite/austenite phase fraction using a multi-frequency electromagnetic sensor

    Article • NDT & E International, January 2009, Elsevier

    Dr Martin Strangwood

  62. Welcome to the new-look Sports Engineering

    Article • Sports Engineering, August 2008, Springer Science + Business Media

    Dr Martin Strangwood

  63. Toward a large lightweight mirror for AO: development of a 1m Ni coated CFRP mirror

    Article • July 2008, SPIE

    Dr Martin Strangwood

  64. Comparison between elastic modulus and ultrasonic velocity anisotropy with respect to rolling direction in steels

    Article • Ironmaking & Steelmaking, July 2008, Taylor & Francis

    Dr Martin Strangwood

  65. Off-line measurement of decarburization of steels using a multifrequency electromagnetic sensor

    Article • Scripta Materialia, June 2008, Elsevier

    Dr Martin Strangwood

  66. Development of Bimodal Grain Structures in Nb-Containing High-Strength Low-Alloy Steels during Slab Reheating

    Article • Metallurgical and Materials Transactions A, May 2008, Springer Science + Business Media

    Dr Martin Strangwood

  67. Prediction of Elastic Modulus + Anisotropy Using X-Ray and Electron Backscattered Diffraction Texture Quantification and Ultrasonic (Electromagnetic Acoustic Transducer) Measurements in Aluminum Sheets

    Article • Metallurgical and Materials Transactions A, February 2008, Springer Science + Business Media

    Dr Martin Strangwood

  68. Advanced Materials in Golf Driver Head Design

    Article • October 2007, Taylor & Francis

    Dr Martin Strangwood

  69. The Influence of Groove Profile; Ball Type and Surface Condition on Golf Ball Backspin Magnitude

    Article • October 2007, Taylor & Francis

    Dr Martin Strangwood

  70. Modelling of materials for sports equipment

    Article • September 2007, Taylor & Francis

    Dr Martin Strangwood

  71. Influence of microalloying precipitates on Bauschinger effect during UOE forming of line pipe steels

    Article • Materials Technology, September 2007, Taylor & Francis

    Dr Martin Strangwood

  72. Exploring the relationship between ferrite fraction and morphology and the electromagnetic properties of steel

    Article • Journal of Materials Science, August 2007, Springer Science + Business Media

    Dr Martin Strangwood

  73. Microstructure-microhardness relationships in friction stir welded AA5251

    Article • Journal of Materials Science, May 2007, Springer Science + Business Media

    Dr Martin Strangwood

  74. Influence of base metal microstructure on microstructural development in aluminium based alloy friction stir welds

    Article • Science and Technology of Welding & Joining, May 2007, Taylor & Francis

    Dr Martin Strangwood

  75. Characterisation of bimodal grain structures in HSLA steels

    Article • Materials Characterization, May 2007, Elsevier

    Dr Martin Strangwood

  76. Measurement of Permeability and Ferrite/austenite Phase Fraction Using a Multi-frequency Electromagnetic Sensor

    Article • May 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Dr Martin Strangwood

  77. Modelling of materials for sports equipment

    Article • January 2007, Elsevier

    Dr Martin Strangwood

  78. Effects of alloying elements on the microstructure and inclusion formation in HSLA multipass welds

    Article • Materials Characterization, January 2007, Elsevier

    Dr Martin Strangwood

  79. Brazing of Al2O3 with Rapidly Solidified Melt Spun Ni-Cr-P Alloy Ribbons

    Article • November 2006, CrossRef Test Account

    Dr Martin Strangwood

  80. Brazing of Al2O3 with Rapidly Solidified Melt Spun Ni-Cr-P Alloy Ribbons

    Article • Materials Science Forum, November 2006, Trans Tech Publications

    Dr Martin Strangwood

  81. Comparison of the static and dynamic behaviour of carbon fibre composite golf club shafts

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, October 2006, SAGE Publications

    Dr Martin Strangwood

  82. Intergranular Corrosion and Stress Corrosion Cracking of Sensitised AA5182

    Article • July 2006, CrossRef Test Account

    Dr Martin Strangwood

  83. Intergranular Corrosion and Stress Corrosion Cracking of Sensitised AA5182

    Article • Materials Science Forum, July 2006, Trans Tech Publications

    Dr Martin Strangwood

  84. Multi-frequency electromagnetic sensor measurement of ferrite/austenite phase fraction—Experiment and theory

    Article • Scripta Materialia, May 2006, Elsevier

    Dr Martin Strangwood

  85. Synopsis of Current Developments: Cycling

    Article • January 2006, Springer Science + Business Media

    Dr Martin Strangwood

  86. Thermo-mechanical Modification Techniques for Structural Foams used in Racing Bicycle Wheels

    Article • January 2006, Springer Science + Business Media

    Dr Martin Strangwood

  87. Factors Determining Backspin from Golf Wedges

    Article • January 2006, Springer Science + Business Media

    Dr Martin Strangwood

  88. Modelling Vibration Frequency and Stiffness Variations in Welded Ti-Based Alloy Golf Driver Heads

    Article • January 2006, Springer Science + Business Media

    Dr Martin Strangwood

  89. Energy Losses in Viscoelastic Golf Balls

    Article • Proceedings of the Institution of Mechanical Engineers Part L Journal of Materials Design and Applications, January 2006, SAGE Publications

    Dr Martin Strangwood

  90. Cleavage Initiation in Ti-V-N and V-N Microalloyed Forging Steels

    Article • November 2005, CrossRef Test Account

    Dr Martin Strangwood

  91. Characterisation of Bimodal Grain Structures and Their Dependence on Inhomogeneous Precipitate Distribution during Casting

    Article • November 2005, CrossRef Test Account

    Dr Martin Strangwood

  92. Characterisation of Bimodal Grain Structures and Their Dependence on Inhomogeneous Precipitate Distribution during Casting

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Dr Martin Strangwood

  93. Cleavage Initiation in Ti-V-N and V-N Microalloyed Forging Steels

    Article • Materials Science Forum, November 2005, Trans Tech Publications

    Dr Martin Strangwood

  94. Microstructural modification in full penetration and partial penetration electron beam welds in INCONEL-718 (IN-718) and its effect on fatigue crack initiation

    Article • Metallurgical and Materials Transactions A, May 2005, Springer Science + Business Media

    Dr Martin Strangwood

  95. Material and surface effects on the spin and launch angle generated from a wedge/ball interaction in golf

    Article • Sports Engineering, March 2005, Springer Science + Business Media

    Dr Martin Strangwood

  96. Modelling of the effect of microstructural variation on inductive sensor measurements of phase transformation in steel

    Article • Journal of Physics Conference Series, January 2005, Institute of Physics Publishing

    Dr Martin Strangwood

  97. Effect of microstructural variations on smart inductive sensor measurements of phase transformation in steel

    Article • Scripta Materialia, September 2004, Elsevier

    Dr Martin Strangwood

  98. Measurement and modeling of the electromagnetic response to phase transformation in steels

    Article • Metallurgical and Materials Transactions A, March 2004, Springer Science + Business Media

    Dr Martin Strangwood

  99. Measurement and modeling of the electromagnetic response to phase transformation in steels

    Article • Metallurgical and Materials Transactions A, March 2004, Springer Science + Business Media

    Dr Martin Strangwood

  100. Observations of cleavage initiation at (Ti,V)(C,N) particles of heterogeneous composition in microalloyed steels

    Article • Scripta Materialia, February 2004, Elsevier

    Dr Martin Strangwood

  101. The role of the slope out region on fatigue crack initiation in electron beam welded waspaloy

    Article • Metallurgical and Materials Transactions A, August 2003, Springer Science + Business Media

    Dr Martin Strangwood

  102. Effect of microalloying additions on steel plate to pipe property variations during UOE linepipe processing

    Article • Materials Science and Technology, May 2003, Taylor & Francis

    Dr Martin Strangwood

  103. Materials in golf

    Article • January 2003, Elsevier

    Dr Martin Strangwood

  104. Measurement of phase transformation in steels using electromagnetic sensors

    Article • Ironmaking & Steelmaking, December 2002, Taylor & Francis

    Dr Martin Strangwood

  105. Processing of Al2O3/SiC nanocomposites—part 2: green body formation and sintering

    Article • Journal of the European Ceramic Society, September 2002, Elsevier

    Dr Martin Strangwood

  106. Fracture behaviour in medium-carbon Ti–V–N and V–N microalloyed ferritic-pearlitic and bainitic forging steels with enhanced machinability

    Article • Materials Science and Engineering A, May 2002, Elsevier

    Dr Martin Strangwood

  107. Dependency of fracture toughness on the inhomogeneity of coarse TiN particle distribution in a low alloy steel

    Article • Metallurgical and Materials Transactions A, May 2001, Springer Science + Business Media

    Dr Martin Strangwood

  108. Superplastic behaviour of Inconel 718 sheet

    Article • Materials Science and Technology, November 2000, Taylor & Francis

    Dr Martin Strangwood

  109. Cleavage initiation in Ti–V–N and V–N microalloyed ferritic–pearlitic forging steels

    Article • Materials Science and Engineering A, May 2000, Elsevier

    Dr Martin Strangwood

  110. Effect of TiN particles and microstructure on fracture toughness in simulated heat-affected zones of a structural steel

    Article • Metallurgical and Materials Transactions A, August 1999, Springer Science + Business Media

    Dr Martin Strangwood

  111. Microstructural and Magnetic Studies of Hddr Magnets from High Boron NdFeB(Zr) Alloys

    Article • MRS Proceedings, January 1999, Cambridge University Press

    Dr Martin Strangwood

  112. THE CRACK INITIATION TOUGHNESS FOR BRITTLE FRACTURE OF SUPER DUPLEX STAINLESS STEEL

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 1997, Wiley

    Dr Martin Strangwood, Prof Thomas J Marrow

  113. An assessment of the influence of complex stress states on martensite start temperature

    Article • Acta Materialia, December 1996, Elsevier

    Dr Martin Strangwood

  114. Welding of rapidly solidified Alloy 8009 (Al–8·5Fe–1·7Si–1·3V): preliminary study

    Article • Materials Science and Technology, November 1996, Maney Publishing

    Dr Martin Strangwood

  115. Welding of rapidly solidified Alloy 8009 (Al–8·5Fe–1·7Si–1·3V): preliminary study

    Article • Materials Science and Technology, November 1996, Taylor & Francis

    Dr Martin Strangwood

  116. The massive transformation in TiAl alloys: Mechanistic observations

    Article • Acta Materialia, September 1996, Elsevier

    Dr Martin Strangwood

  117. Hydrogen-assisted stable crack growth in iron-3 wt% silicon steel

    Article • Acta Materialia, August 1996, Elsevier

    Professor Mark Aindow, Dr Martin Strangwood, Prof Thomas J Marrow

  118. Cyclic fatigue and fracture behavior of a gamma-titanium aluminide intermetallic Srivatsan, T.S., Soboyejo, W.O. and Strangwood, M. Eng. Fract. Mech. (1995) 52 (1), 71–82

    Article • International Journal of Fatigue, August 1996, Elsevier

    Dr Martin Strangwood

  119. The tensile behaviour of gamma titanium aluminide intermetallic

    Article • Journal of Materials Science, April 1996, Springer Science + Business Media

    Dr Martin Strangwood

  120. Cyclic fatigue and fracture behavior of a gamma-titanium aluminide intermetallic

    Article • Engineering Fracture Mechanics, September 1995, Elsevier

    Dr Martin Strangwood

  121. Diffusion Bonding Of Ti-48A1-2Mn-2Nb (at. %)

    Article • MRS Proceedings, January 1994, Cambridge University Press

    Dr Martin Strangwood

  122. Microstructural Development at Ti-Based Alloy/Coated SiC

    Article • MRS Proceedings, January 1994, Cambridge University Press

    Dr Martin Strangwood

  123. The influence of thermal treatments on interfacial properties and fatigue crack growth resistance in SCS-6/Ti β21s composites

    Article • Composites, January 1994, Elsevier

    Dr Martin Strangwood

  124. The effect of alloy content on the microstructure of as-deposited weldmetal in 9Cr-based ferrous weldments

    Article • Journal de Physique IV (Proceedings), November 1993, EDP Sciences

    Dr Martin Strangwood

  125. High temperature phase transformation kinetics and their effects on diffusion bonding of Ti-48Al-2Mn-2Nb

    Article • Journal de Physique IV (Proceedings), November 1993, EDP Sciences

    Dr Martin Strangwood

  126. Embrittlement and crack growth in high temperature intermetallics

    Article • Materials Science and Technology, April 1992, Maney Publishing

    Dr Martin Strangwood

  127. Embrittlement and crack growth in high temperature intermetallics

    Article • Materials Science and Technology, April 1992, Taylor & Francis

    Dr Martin Strangwood

  128. An initial study of the superplastic behaviour of a Ti3Al-based alloy

    Article • Journal of Materials Science Letters, January 1992, Springer Science + Business Media

    Dr Martin Strangwood

  129. The development of microstructure during extrusion of Al8Fe flake

    Article • Materials Science and Engineering A, March 1991, Elsevier

    Dr Martin Strangwood

  130. Effects of chromium on crack growth and oxidation in nickel aluminide

    Article • Acta Metallurgica et Materialia, December 1990, Elsevier

    Dr Martin Strangwood

  131. Segregation to SiC/Al interfaces in Al based metal matrix composites

    Article • Scripta Metallurgica et Materialia, August 1990, Elsevier

    Dr Martin Strangwood

  132. Aging effects in welded cast CF3 stainless steel

    Article • Materials Science and Technology, March 1990, Maney Publishing

    Dr Martin Strangwood

  133. Aging effects in welded cast CF3 stainless steel

    Article • Materials Science and Technology, March 1990, Taylor & Francis

    Dr Martin Strangwood

  134. Hockey Balls

    Article • Taylor & Francis

    Dr Martin Strangwood

  135. Golf Club Construction, Design and Performance

    Article • Taylor & Francis

    Dr Martin Strangwood

  136. The Science and Engineering of Golf Balls

    Article • Taylor & Francis

    Dr Martin Strangwood

  137. Modelling the Oblique Impact of Golf Balls (P128)

    Article • Springer Science + Business Media

    Dr Martin Strangwood

  138. The Role of Materials and Construction on Hockey Ball Performance (P88)

    Article • Springer Science + Business Media

    Dr Martin Strangwood