All Stories

  1. Twinning anisotropy of tantalum during nanoindentation
  2. Structural, optical and mechanical properties of amorphous and crystalline alumina thin films
  3. Progress in high temperature nanomechanical testing of coatings for optimising their performance in high speed machining
  4. Evolution of self-organization in nano-structured PVD coatings under extreme tribological conditions
  5. Mechanical and phase stability of TiBC coatings up to 1000 °C
  6. The Role of Innovative Nanomechanical Test Techniques in Designing More Durable, Adaptive and Multifunctional Coatings
  7. Short note on improved integration of mechanical testing in predictive wear models
  8. Nanomechanical study of thin film nanocomposite and PVD thin films on polymer substrates for optical applications
  9. Environmental Nanomechanical Testing of Polymers and Nanocomposites
  10. Local and Global Properties of a Lead-Free Solder
  11. Comparison of nano-f`retting and nano-scratch tests on biomedical materials
  12. Review of recent progress in nanoscratch testing
  13. Effect of deposition parameters on TiAlN coating using pulsed DC CFUBMS
  14. Nanomechanical properties of graphene on poly(ethylene terephthalate) substrate
  15. Nano-scratch, nanoindentation and fretting tests of 5–80nm ta-C films on Si(100)
  16. Nanoscale Friction Measurements Up to 750 °C
  17. Hierarchical adaptive nanostructured PVD coatings for extreme tribological applications: the quest for nonequilibrium states and emergent behavior
  18. An investigation into the correlation between nano-impact resistance and erosion performance of EB-PVD thermal barrier coatings on thermal ageing
  19. Mechanism of adaptability for the nano-structured TiAlCrSiYN-based hard physical vapor deposition coatings under extreme frictional conditions
  20. Accelerated nano-fretting testing of Si(100)
  21. Why can TiAlCrSiYN-based adaptive coatings deliver exceptional performance under extreme frictional conditions?
  22. Nanoscratch testing of atomic layer deposition and magnetron sputtered TiO2 and Al2O3 coatings on polymeric substrates
  23. Nanoscratch and nanowear testing of TiN coatings on M42 steel
  24. Deformation of Si(100) in spherical contacts — Comparison of nano-fretting and nano-scratch tests with nano-indentation
  25. Optimized scratch adhesion for TiSiN coatings deposited by a combination of DC and RF sputtering
  26. Effects of mechanical properties and layer structure on the cyclic dynamic loading of TiN-based coatings
  27. Low Temperature Nano-Tribological Study on a Functionally Graded Tribological Coating Using Nanoscratch Tests
  28. Relationship between mechanical properties of thin nitride-based films and their behaviour in nano-scratch tests
  29. Advanced nanomechanical testing for high speed machining of hard-to-cut aerospace alloys
  30. Nano-impact testing of TiFeN and TiFeMoN films for dynamic toughness evaluation
  31. In situ accelerated micro-wear — A new technique to fill the measurement gap
  32. A study of low temperature mechanical properties and creep behaviour of polypropylene using a new sub-ambient temperature nanoindentation test platform
  33. Microtribology: new tools to fill measurement gap
  34. Emergent behavior of nano-multilayered coatings during dry high-speed machining of hardened tool steels
  35. Structure, properties and wear performance of nano-multilayered TiAlCrSiYN/TiAlCrN coatings during machining of Ni-based aerospace superalloys
  36. Nanocomposite Coatings
  37. Nanocomposite Coatings
  38. Self-Organization during Friction in Complex Surface Engineered Tribosystems
  39. Improved nanomechanical test techniques for surface engineered materials
  40. Nano-mechanical and tribological properties of a multilayered DLC coating under sub-ambient temperatures
  41. Oxide scales formation in nano-crystalline TiAlCrSiYN PVD coatings at elevated temperature
  42. Design and performance of AlTiN and TiAlCrN PVD coatings for machining of hard to cut materials
  43. Impact of Al and Cr alloying in TiN-based PVD coatings on cutting performance during machining of hard to cut materials
  44. Nanoindentation of Advanced Polymers Under Non-Ambient Conditions: Creep Modelling and Tan Delta
  45. Coating optimisation for high speed machining with advanced nanomechanical test methods
  46. Nanomechanical and nanotribological testing of ultra-thin carbon-based and MoST films for increased MEMS durability
  47. Nanocrystalline coating design for extreme applications based on the concept of complex adaptive behavior
  48. Effect of temperature of annealing below 900 °C on structure, properties and tool life of an AlTiN coating under various cutting conditions
  49. An investigation into which factors control the nanotribological behaviour of thin sputtered carbon films
  50. Elevated Temperature Nanoindentation and Viscoelastic Behaviour of Thin Poly(ethylene terephthalate) Films
  51. Erratum to “Investigating the correlation between nano-impact fracture resistance and hardness/modulus ratio from nanoindentation at 25–500 °C and the fracture resistance and lifetime of cutting tools with Ti1−xAlxN (x=0.5 and 0.67) PVD coatings in mil...
  52. How to predict and improve coating performance by nanomechanical testing
  53. Nanoindentation creep and glass transition temperatures in polymers
  54. Investigation of the Tribological Properties of Diamond Films
  55. Influence of water on the nanoindentation creep response of nylon 6
  56. Investigating the correlation between nano-impact fracture resistance and hardness/modulus ratio from nanoindentation at 25–500 °C and the fracture resistance and lifetime of cutting tools with Ti1−xAlxN (x=0.5 and 0.67) PVD coatings in milling operations
  57. Impact of annealing on microstructure, properties and cutting performance of an AlTiN coating
  58. Structure-property correlations in aluminum oxide thin films grown by reactive AC magnetron sputtering
  59. Modelling indentation creep of polymers: a phenomenological approach
  60. Physical and Mechanical Properties to Characterize Tribological Compatibility of Heavily Loaded Tribosystems (HLTS)
  61. Tooling Materials and Some Features of Their Self-Organization
  62. Influence of experimental factors and film thickness on the measured critical load in the nanoscratch test
  63. An investigation of the nanoindentation and nano/micro-tribological behaviour of monolayer, bilayer and trilayer coatings on cemented carbide
  64. Effect of mechanical properties measured at room and elevated temperatures on the wear resistance of cutting tools with TiAlN and AlCrN coatings
  65. Influence of mechanical properties on the nanoscratch behaviour of hard nanocomposite TiN/Si 3 N 4 coatings on Si
  66. Nanotribological and nanomechanical properties of 5–80 nm tetrahedral amorphous carbon films on silicon
  67. Evaluation of the fracture resistance of DLC coatings on tool steel under dynamic loading
  68. Nanoindentation, Nanoscratch and Nanoimpact Testing of Silicon-Based Materials with Nanostructured Surfaces
  69. Nano-impact testing—an effective tool for assessing the resistance of advanced wear-resistant coatings to fatigue failure and delamination
  70. Nanoscale repetitive impact testing of polymer films
  71. Evaluating the fracture properties and fatigue wear of tetrahedral amorphous carbon films on silicon by nano-impact testing
  72. Nanoscale repetitive impact testing of polymer films
  73. Influence of mechanical properties on the nanowear of uniaxially oriented poly(ethylene terephthalate) film
  74. Nanoscale materials testing under industrially relevant conditions: high-temperature nanoindentation testing
  75. Determination of Hardness and Young's Modulus of Brush Plated Nano-AL2O3/NI Composite Coating by Nanoindentation Testing
  76. Investigating the fracture resistance and adhesion of DLC films with micro-impact testing
  77. High-temperature nanoindentation testing of fused silica and other materials
  78. High-temperature nanoindentation testing of fused silica and other materials
  79. Nanoindentation Behavior of Clay/Poly(Ethylene Oxide) Nanocomposites
  80. Fabricating Nano-structured Surface of Si-based Materials and Their Properties
  81. Nanoindentation and nanoscratch testing of uniaxially and biaxially drawn poly(ethylene terephthalate) film
  82. Micro-impact testing: a new technique for investigating fracture toughness
  83. Nanotribology of biaxially oriented poly(ethylene terephthalate) film
  84. Micro-Impact Testing: A New Technique for Investigating Thin Film Toughness, Adhesion, Erosive Wear Resistance, and Dynamic Hardness
  85. Scanning force microscopy of polyester: surface structure and adhesive properties
  86. Friction Force Microscopy of Self-Assembled Monolayers:  Influence of Adsorbate Alkyl Chain Length, Terminal Group Chemistry, and Scan Velocity
  87. Scanning force microscopy of plasma polymerised hexane: information on the mechanical properties of thin films from tip-induced wear
  88. Tapping mode and phase imaging of biaxially oriented polyester films
  89. Friction force microscopy study of diamond films modified by a glow discharge treatment
  90. Scanning force microscopy of bulk-filled uniaxially oriented poly(ethylene terephthalate) films
  91. Variation of Frictional Forces in Air with the Compositions of Heterogeneous Organic Surfaces
  92. Frictional, adhesive and mechanical properties of polyester films probed by scanning force microscopy
  93. Non-destructive imaging of delicate polymer surfaces using scanning force microscopy tips modified with hydrophobic self-assembled monolayers
  94. Friction and adhesion of mixed self-assembled monolayers studied by chemical force microscopy
  95. Alkane adsorption from vapour onto hydrophobic solid/vapour and hydrophobic solid/water interfaces
  96. Nitrous and nitric acid ionisation equilibria and nitrous acid-catalysed nitration of 4-fluorophenol, in aqueous trifluoroacetic acid
  97. Correlation of friction, adhesion, wettability and surface chemistry after argon plasma treatment of poly(ethylene terephthalate)
  98. Scanning force microscopy investigation of poly(ethylene terephthalate) modified by argon plasma treatment
  99. Wettability of spherical particles at liquid surfaces
  100. Oxidation of ascorbic acid by nitrous acid: conditions where autoxidation of nitric oxide is rate determining
  101. Role of the reaction of nitric oxide with oxygen in the decomposition of nitrous acid in aqueous acid solution
  102. The kinetics and mechanism of oxidation of hydroquinone and chlorohydroquinone in the presence of nitrous acid in aqueous acid solution
  103. Nitration and oxidation of 4-methoxyphenol by nitrous acid in aqueous acid solution
  104. Corrigendum
  105. The kinetics and mechanism of reaction of nitrous acid with 4-substituted phenols in aqueous acid solution