All Stories

  1. Weld zone and residual stress development in AA7050 stationary shoulder friction stir T-joint weld

    Article • Journal of Materials Processing Technology, January 2019, Elsevier

    Professor Philip J Withers

  2. Linking microstructure and processing defects to mechanical properties of selectively laser melted AlSi10Mg alloy

    Article • Theoretical and Applied Fracture Mechanics, December 2018, Elsevier

    Professor Philip J Withers

  3. Synchrotron X-ray diffraction based method for stress intensity factor evaluation in the bulk of materials

    Article • Theoretical and Applied Fracture Mechanics, December 2018, Elsevier

    Professor Philip J Withers

  4. Quantifying fibre reorientation during axial compression of a composite through time-lapse X-ray imaging and individual fibre tracking

    Article • Composites Science and Technology, November 2018, Elsevier

    Professor Philip J Withers

  5. Thermo – mechanical properties of SPS produced self-healing thermal barrier coatings containing pure and alloyed MoSi 2 particles

    Article • Journal of the European Ceramic Society, September 2018, Elsevier

    Professor Philip J Withers

  6. New software protocols for enabling laboratory based temporal CT

    Article • Review of Scientific Instruments, September 2018, American Institute of Physics

    Professor Philip J Withers

  7. The effect of shoulder coupling on the residual stress and hardness distribution in AA7050 friction stir butt welds

    Article • Materials Science and Engineering A, September 2018, Elsevier

    Professor Philip J Withers

  8. Laser-matter interactions in additive manufacturing of stainless steel SS316L and 13-93 bioactive glass revealed by in situ X-ray imaging

    Article • Additive Manufacturing, August 2018, Elsevier

    Professor Philip J Withers, Professor Julian R Jones

  9. High resolution low kV EBSD of heavily deformed and nanocrystalline Aluminium by dictionary-based indexing

    Article • Scientific Reports, July 2018, Springer Science + Business Media

    Professor Philip J Withers

  10. Effect of hydration and crack orientation on crack-tip strain, crack opening displacement and crack-tip shielding in elephant dentin

    Article • Dental Materials, July 2018, Elsevier

    Professor Philip J Withers

  11. Microstructural degradation of Electron Beam-Physical Vapour Deposition Thermal Barrier Coating during thermal cycling tracked by X-ray micro-computed tomography

    Article • Scripta Materialia, July 2018, Elsevier

    Professor Philip J Withers

  12. Improved Low Cycle Fatigue Analysis for Ni-Based Turbine Nozzles

    Article • June 2018, ASME International

    Professor Philip J Withers

  13. Evaporation Dynamics and NaCl Precipitation on Capillarity-Coupled Heterogeneous Porous Surfaces

    Article • Water Resources Research, June 2018, American Geophysical Union (AGU)

    Professor Philip J Withers

  14. Joint image reconstruction method with correlative multi-channel prior for x-ray spectral computed tomography

    Article • Inverse Problems, April 2018, Institute of Physics Publishing

    Professor Philip J Withers

  15. In situ X-ray imaging of defect and molten pool dynamics in laser additive manufacturing

    Article • Nature Communications, April 2018, Springer Science + Business Media

    Professor Philip J Withers

  16. Industrial Gear Oils: Tribological Performance and Subsurface Changes

    Article • Tribology Letters, April 2018, Springer Science + Business Media

    Professor Philip J Withers

  17. X-ray computed tomography of polymer composites

    Article • Composites Science and Technology, March 2018, Elsevier

    Professor Philip J Withers

  18. Time-lapse 3D imaging of calcite precipitation in a microporous column

    Article • Geochimica et Cosmochimica Acta, February 2018, Elsevier

    Professor Philip J Withers

  19. 3D characterization of porosity in an air plasma-sprayed thermal barrier coating and its effect on thermal conductivity

    Article • Journal of the American Ceramic Society, January 2018, Wiley

    Professor Philip J Withers

  20. 7.6 Computed Tomography of Composites

    Article • January 2018, Elsevier

    Professor Philip J Withers

  21. TomoPhantom, a software package to generate 2D–4D analytical phantoms for CT image reconstruction algorithm benchmarks

    Article • SoftwareX, January 2018, Elsevier

    Professor Philip J Withers

  22. 4.10 Residual Stresses in Metal Matrix Composites

    Article • January 2018, Elsevier

    Professor Philip J Withers

  23. Investigation of residual stress distribution and texture evolution in AA7050 stationary shoulder friction stir welded joints

    Article • Materials Science and Engineering A, January 2018, Elsevier

    Professor Philip J Withers

  24. Residual stress control of multipass welds using low transformation temperature fillers

    Article • Materials Science and Technology, December 2017, Taylor & Francis

    Professor Philip J Withers, Professor HARSHAD K Bhadeshia

  25. A Novel Tomographic Reconstruction Method Based on the Robust Student's t Function For Suppressing Data Outliers

    Article • IEEE Transactions on Computational Imaging, December 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  26. X-ray micro-computed tomography (μCT): an emerging opportunity in parasite imaging

    Article • Parasitology, November 2017, Cambridge University Press

    Professor Philip J Withers

  27. SparseBeads data: benchmarking sparsity-regularized computed tomography

    Article • Measurement Science and Technology, November 2017, Institute of Physics Publishing

    Professor Philip J Withers

  28. The quantification of impact damage distribution in composite laminates by analysis of X-ray computed tomograms

    Article • Composites Science and Technology, November 2017, Elsevier

    Professor Philip J Withers

  29. Three dimensional imaging of electrical trees in multiple stages

    Article • October 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  30. Special Issue on ‘Modern Imaging Techniques in Fracture and Damage Analyses’: Selected papers from the 21st European Conference of Fracture (ECF 21), held in Catania, Sicily, Italy, on 20–24 June 2016

    Article • Engineering Fracture Mechanics, October 2017, Elsevier

    Professor Philip J Withers

  31. Mapping fibre failure in situ in carbon fibre reinforced polymers by fast synchrotron X-ray computed tomography

    Article • Composites Science and Technology, September 2017, Elsevier

    Professor Philip J Withers

  32. The imaging of failure in structural materials by synchrotron radiation X-ray microtomography

    Article • Engineering Fracture Mechanics, September 2017, Elsevier

    Professor Philip J Withers

  33. Model-based iterative reconstruction using higher-order regularization of dynamic synchrotron data

    Article • Measurement Science and Technology, August 2017, Institute of Physics Publishing

    Professor Philip J Withers

  34. X-ray Tomography Characterisation of Lattice Structures Processed by Selective Electron Beam Melting

    Article • Metals, August 2017, MDPI AG

    Professor Philip J Withers

  35. Multiscale correlative tomography: an investigation of creep cavitation in 316 stainless steel

    Article • Scientific Reports, August 2017, Springer Science + Business Media

    Professor Philip J Withers

  36. The Influence of Porosity on Fatigue Crack Initiation in Additively Manufactured Titanium Components

    Article • Scientific Reports, August 2017, Springer Science + Business Media

    Professor Philip J Withers

  37. Strain-induced reactivation of corrosion pits in austenitic stainless steel

    Article • Corrosion Science, August 2017, Elsevier

    Professor Philip J Withers

  38. Microstructural evolution during sintering of copper particles studied by laboratory diffraction contrast tomography (LabDCT)

    Article • Scientific Reports, July 2017, Springer Science + Business Media

    Professor Philip J Withers

  39. Correlative 3D Imaging and Characterization of Human Dentine

    Article • Microscopy and Microanalysis, July 2017, Cambridge University Press

    Professor Philip J Withers

  40. Degradation of metallic materials studied by correlative tomography

    Article • IOP Conference Series Materials Science and Engineering, July 2017, Institute of Physics Publishing

    Professor Philip J Withers

  41. Correlative Tomography for Additive Manufacturing of Biomedical Implants

    Article • Microscopy and Microanalysis, July 2017, Cambridge University Press

    Professor Philip J Withers

  42. Crystallographic effects on the corrosion of twin roll cast AZ31 Mg alloy sheet

    Article • Acta Materialia, July 2017, Elsevier

    Professor Philip J Withers

  43. Mid-thickness studies of the stress intensity factor in the bulk of bainitic steel

    Article • Frattura ed Integrità Strutturale, June 2017, Gruppo Italiano Frattura

    Professor Philip J Withers

  44. Evolution of Residual Stress in Tensile Armour Wires of Flexible Pipes During Pipe Manufacture

    Article • June 2017, ASME International

    Professor Philip J Withers

  45. A study of the progression of damage in an axially loaded Branta leucopsis femur using X-ray computed tomography and digital image correlation

    Article • PeerJ, June 2017, PeerJ

    Professor Philip J Withers, Lee Margetts

  46. Ablation-resistant carbide Zr0.8Ti0.2C0.74B0.26 for oxidizing environments up to 3,000 °C

    Article • Nature Communications, June 2017, Springer Science + Business Media

    Professor Philip J Withers

  47. 3D elemental mapping of materials and structures by laboratory scale spectroscopic X-ray tomography

    Article • Journal of Physics Conference Series, June 2017, Institute of Physics Publishing

    Professor Philip J Withers

  48. Digital element simulation of aligned tows during compaction validated by computed tomography (CT)

    Article • International Journal of Solids and Structures, June 2017, Elsevier

    Professor Philip J Withers

  49. A multi-scale correlative investigation of ductile fracture

    Article • Acta Materialia, May 2017, Elsevier

    Professor Philip J Withers

  50. Time-lapse lab-based x-ray nano-CT study of corrosion damage

    Article • Journal of Microscopy, April 2017, Wiley

    Professor Philip J Withers

  51. Comparison of residual stress distributions in conventional and stationary shoulder high-strength aluminum alloy friction stir welds

    Article • Journal of Materials Processing Technology, April 2017, Elsevier

    Matthew J Roy, Professor Philip J Withers

  52. How to fragment peralkaline rhyolites: Observations on pumice using combined multi-scale 2D and 3D imaging

    Article • Journal of Volcanology and Geothermal Research, April 2017, Elsevier

    Professor Philip J Withers

  53. Comparison of grain to grain orientation and stiffness mapping by spatially resolved acoustic spectroscopy and EBSD

    Article • Journal of Microscopy, March 2017, Wiley

    Professor Philip J Withers

  54. The influence of NaCl concentration on salt precipitation in heterogeneous porous media

    Article • Water Resources Research, February 2017, American Geophysical Union (AGU)

    Professor Philip J Withers

  55. Crack healing behaviour of Cr 2 AlC MAX phase studied by X-ray tomography

    Article • Journal of the European Ceramic Society, February 2017, Elsevier

    Professor Philip J Withers

  56. On compression and damage evolution in two thermoplastics

    Article • Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences, January 2017, Royal Society Publishing

    Professor Philip J Withers

  57. On the high-rate failure of carbon fibre composites

    Article • January 2017, American Institute of Physics

    Professor Philip J Withers

  58. X-ray micro computed tomography characterization of cellular SiC foams for their applications in chemical engineering

    Article • Materials Characterization, January 2017, Elsevier

    Professor Philip J Withers

  59. On compression and damage evolution in PTFE and PEEK

    Article • January 2017, American Institute of Physics

    Professor Philip J Withers

  60. On the compression of aluminium foam structures under shock

    Article • January 2017, American Institute of Physics

    Professor Philip J Withers

  61. X-ray computed tomography study of kink bands in unidirectional composites

    Article • Composite Structures, January 2017, Elsevier

    Professor Philip J Withers

  62. Broad ion beam serial section tomography

    Article • Ultramicroscopy, January 2017, Elsevier

    Professor Philip J Withers

  63. Laboratory diffraction contrast tomography - applications and future directions

    Article • December 2016, Wiley

    Professor Philip J Withers

  64. Utilising correlative 3D imaging to understand creep cavitation in stainless steel

    Article • December 2016, Wiley

    Professor Philip J Withers

  65. An evaluation of diffraction peak profile analysis (DPPA) methods to study plastically deformed metals

    Article • Materials & Design, December 2016, Elsevier

    Dr Thomas H Simm, Professor Philip J Withers

  66. Generation of micro-scale finite element models from synchrotron X-ray CT images for multidirectional carbon fibre reinforced composites

    Article • Composites Part A Applied Science and Manufacturing, December 2016, Elsevier

    Professor Philip J Withers

  67. Influence of embedded MoSi 2 particles on the high temperature thermal conductivity of SPS produced yttria-stabilised zirconia model thermal barrier coatings

    Article • Surface and Coatings Technology, December 2016, Elsevier

    Professor Philip J Withers

  68. Influence of Tow Architecture on Compaction and Nesting in Textile Preforms

    Article • Applied Composite Materials, November 2016, Springer Science + Business Media

    Professor Philip J Withers

  69. The effect of the weld fusion zone shape on residual stress in submerged arc welding

    Article • The International Journal of Advanced Manufacturing Technology, November 2016, Springer Science + Business Media

    Matthew J Roy, Professor Philip J Withers

  70. X-ray microtomography as a tool for investigating the petrological context of Precambrian cellular remains

    Article • Geological Society London Special Publications, November 2016, Geological Society

    Professor Philip J Withers

  71. Fatigue damage assessment of uni-directional non-crimp fabric reinforced polyester composite using X-ray computed tomography

    Article • Composites Science and Technology, November 2016, Elsevier

    Professor Philip J Withers

  72. Micro-mechanics based damage mechanics for 3D orthogonal woven composites: Experiment and numerical modelling

    Article • Composite Structures, November 2016, Elsevier

    Professor Philip J Withers

  73. Porosity regrowth during heat treatment of hot isostatically pressed additively manufactured titanium components

    Article • Scripta Materialia, September 2016, Elsevier

    Professor Philip J Withers

  74. In Situ Laboratory-Based Transmission X-Ray Microscopy and Tomography of Material Deformation at the Nanoscale

    Article • Experimental Mechanics, August 2016, Springer Science + Business Media

    Professor Philip J Withers

  75. Determination of the constitutive relation and critical condition for the shock compression of cellular solids

    Article • Mechanics of Materials, August 2016, Elsevier

    Professor Philip J Withers

  76. 4-D imaging of sub-second dynamics in pore-scale processes using real-time synchrotron X-ray tomography

    Article • Solid Earth, July 2016, Copernicus GmbH

    Professor Philip J Withers

  77. Correlative multiscale tomography of biological materials

    Article • MRS Bulletin, July 2016, Cambridge University Press

    Professor Philip J Withers

  78. High Spatial Resolution Evaluation of Residual Stresses in Shot Peened Specimens Containing Sharp and Blunt Notches by Micro-hole Drilling, Micro-slot Cutting and Micro-X-ray Diffraction Methods

    Article • Experimental Mechanics, June 2016, Springer Science + Business Media

    Professor Philip J Withers

  79. Dynamic damage in carbon-fibre composites

    Article • Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences, May 2016, Royal Society Publishing

    Professor Neil Bourne, Professor Philip J Withers

  80. A comparison of different approaches for imaging cracks in composites by X-ray microtomography

    Article • Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences, May 2016, Royal Society Publishing

    Professor Philip J Withers

  81. Characterisation of overloads in fatigue by 2D strain mapping at the surface and in the bulk

    Article • Fatigue & Fracture of Engineering Materials & Structures, May 2016, Wiley

    Professor Philip J Withers

  82. Post-processing techniques for making reliable measurements from curve-skeletons

    Article • Computers in Biology and Medicine, May 2016, Elsevier

    Professor Philip J Withers

  83. The application of 3D imaging techniques, simulation and diffusion experiments to explore transport properties in porous oxygen transport membrane support materials

    Article • Solid State Ionics, May 2016, Elsevier

    Professor Philip J Withers

  84. The variation in elastic modulus throughout the compression of foam materials

    Article • Acta Materialia, May 2016, Elsevier

    Professor Philip J Withers

  85. 3D imaging by serial block face scanning electron microscopy for materials science using ultramicrotomy

    Article • Ultramicroscopy, April 2016, Elsevier

    Professor Philip J Withers

  86. Sparsity seeking total generalized variation for undersampled tomographic reconstruction

    Article • April 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  87. The effect of defects on the mechanical response of Ti-6Al-4V cubic lattice structures fabricated by electron beam melting

    Article • Acta Materialia, April 2016, Elsevier

    Professor Philip J Withers

  88. Temporal sparsity exploiting nonlocal regularization for 4D computed tomography reconstruction

    Article • Journal of X-Ray Science and Technology, March 2016, IOS Press

    Professor Philip J Withers

  89. X-ray Computed Tomographic Investigation of the Porosity and Morphology of Plasma Electrolytic Oxidation Coatings

    Article • ACS Applied Materials & Interfaces, March 2016, American Chemical Society (ACS)

    Professor Philip J Withers

  90. The Effectiveness of Hot Isostatic Pressing for Closing Porosity in Titanium Parts Manufactured by Selective Electron Beam Melting

    Article • Metallurgical and Materials Transactions A, March 2016, Springer Science + Business Media

    Professor Philip J Withers

  91. Publisher's Note: “Response and representation of ductile damage under varying shock loading conditions in tantalum” [J. Appl. Phys. 119, 085103 (2016)]

    Article • Journal of Applied Physics, March 2016, American Institute of Physics

    Professor Philip J Withers

  92. Repeated crack healing in MAX-phase ceramics revealed by 4D in situ synchrotron X-ray tomographic microscopy

    Article • Scientific Reports, March 2016, Springer Science + Business Media

    Professor Philip J Withers

  93. Characterisation of an Advanced Nickel Based Superalloy Post Cold Work by Swaging

    Article • Metals, March 2016, MDPI AG

    Professor Philip J Withers

  94. Evolution of damage during the fatigue of 3D woven glass-fibre reinforced composites subjected to tension–tension loading observed by time-lapse X-ray tomography

    Article • Composites Part A Applied Science and Manufacturing, March 2016, Elsevier

    Professor Philip J Withers

  95. Response and representation of ductile damage under varying shock loading conditions in tantalum

    Article • Journal of Applied Physics, February 2016, American Institute of Physics

    Professor Philip J Withers

  96. Residual stress of as-deposited and rolled wire+arc additive manufacturing Ti–6Al–4V components

    Article • Materials Science and Technology, February 2016, Taylor & Francis

    Matthew J Roy, Professor Philip J Withers

  97. Quantifying the metallurgical response of a nuclear steel to welding thermal cycles

    Article • Materials Science and Technology, February 2016, Taylor & Francis

    Professor Philip J Withers

  98. Large volume serial section tomography by Xe Plasma FIB dual beam microscopy

    Article • Ultramicroscopy, February 2016, Elsevier

    Professor Philip J Withers

  99. Synchrotron analysis of toughness anomalies in nanostructured bainite

    Article • Acta Materialia, February 2016, Elsevier

    Professor Philip J Withers

  100. Towards in-process x-ray CT for dimensional metrology

    Article • Measurement Science and Technology, January 2016, Institute of Physics Publishing

    Professor Philip J Withers

  101. Application of a Quasi In Situ Experimental Approach to Estimate 3-D Pitting Corrosion Kinetics in Stainless Steel

    Article • Journal of The Electrochemical Society, January 2016, The Electrochemical Society

    Professor Philip J Withers

  102. Comparative Analysis of Shot-Peened Residual Stresses Using Micro-Hole Drilling, Micro-Slot Cutting, X-ray Diffraction Methods and Finite-Element Modelling

    Article • January 2016, Springer Science + Business Media

    Professor Philip J Withers

  103. Determination of the high temperature elastic properties and diffraction elastic constants of Ni-base superalloys

    Article • Materials & Design, January 2016, Elsevier

    Professor Philip J Withers

  104. Investigation of strain-rate effect on the compressive behaviour of closed-cell aluminium foam by 3D image-based modelling

    Article • Materials & Design, January 2016, Elsevier

    Professor Philip J Withers

  105. Modelling the Residual Stress Field Ahead of the Notch Root in Shot Peened V-Notched Samples

    Article • January 2016, Springer Science + Business Media

    Professor Philip J Withers

  106. Late-stage fatigue damage in a 3D orthogonal non-crimp woven composite: An experimental and numerical study

    Article • Composites Part A Applied Science and Manufacturing, December 2015, Elsevier

    Professor Philip J Withers

  107. Evaluation of the interfacial shear strength and residual stress of TiAlN coating on ZIRLO™ fuel cladding using a modified shear-lag model approach

    Article • Journal of Nuclear Materials, November 2015, Elsevier

    Professor Philip J Withers

  108. 3D chemical imaging in the laboratory by hyperspectral X-ray computed tomography

    Article • Scientific Reports, October 2015, Nature

    Professor Andrew M Beale, Professor Philip J Withers

  109. Congestive Heart Failure Leads to Prolongation of the PR Interval and Atrioventricular Junction Enlargement and Ion Channel Remodelling in the Rabbit

    Article • PLoS ONE, October 2015, PLOS

    Professor Philip J Withers

  110. Non-destructive mapping of grain orientations in 3D by laboratory X-ray microscopy

    Article • Scientific Reports, October 2015, Springer Science + Business Media

    Professor Philip J Withers

  111. 2D and 3D imaging of fatigue failure mechanisms of 3D woven composites

    Article • Composites Part A Applied Science and Manufacturing, October 2015, Elsevier

    Professor Philip J Withers

  112. X-ray microscopy for in situ characterization of 3D nanostructural evolution in the laboratory

    Article • September 2015, SPIE

    Professor Philip J Withers

  113. Geochemical Evidence of the Seasonality, Affinity and Pigmenation of Solenopora jurassica

    Article • PLoS ONE, September 2015, PLOS

    Professor Philip J Withers

  114. Nonintrusive estimation of anisotropic stiffness maps of heterogeneous steel welds for the improvement of ultrasonic array inspection

    Article • IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, August 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  115. Interpreting pathologies in extant and extinct archosaurs using micro-CT

    Article • PeerJ, July 2015, PeerJ

    Professor Philip J Withers

  116. Novel implementations of relaxation methods for measuring residual stresses at the micron scale

    Article • The Journal of Strain Analysis for Engineering Design, July 2015, SAGE Publications

    Professor Philip J Withers

  117. On the deformation twinning of Mg AZ31B: A three-dimensional synchrotron X-ray diffraction experiment and crystal plasticity finite element model

    Article • International Journal of Plasticity, July 2015, Elsevier

    Professor Philip J Withers

  118. 2D mapping of plane stress crack-tip fields following an overload

    Article • Frattura ed Integrità Strutturale, June 2015, Gruppo Italiano Frattura

    Professor Philip J Withers

  119. Damage evolution in freeze cast metal/ceramic composites exhibiting lamellar microstructures

    Article • Frattura ed Integrità Strutturale, June 2015, Gruppo Italiano Frattura

    Professor Philip J Withers

  120. Characterisation and modelling of defect formation in direct-chill cast AZ80 alloy

    Article • Materials Characterization, June 2015, Elsevier

    Professor Philip J Withers

  121. Corrigendum to ‘‘Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting’’ [Mater. Sci. Eng. A 628(2015)188–197]

    Article • Materials Science and Engineering A, June 2015, Elsevier

    Professor Philip J Withers

  122. Microstructural analysis of TRISO particles using multi-scale X-ray computed tomography

    Article • Journal of Nuclear Materials, June 2015, Elsevier

    Professor Philip J Withers

  123. Measurement of Residual Stress Shakedown in Pressure/Tensile Armour Wires of Flexible Pipes by Neutron Diffraction

    Article • May 2015, ASME International

    Professor Philip J Withers

  124. Effects of Grain and Pore Size on Salt Precipitation During Evaporation from Porous Media

    Article • Transport in Porous Media, May 2015, Springer Science + Business Media

    Professor Philip J Withers

  125. Laser Shock Peening on Zr-based Bulk Metallic Glass and Its Effect on Plasticity: Experiment and Modeling

    Article • Scientific Reports, May 2015, Springer Science + Business Media

    Professor Philip J Withers

  126. Morphological Characterisation of Unstained and Intact Tissue Micro-architecture by X-ray Computed Micro- and Nano-Tomography

    Article • Scientific Reports, May 2015, Springer Science + Business Media

    Professor Philip J Withers

  127. Revisiting the blocking force test on ferroelectric ceramics using high energy x-ray diffraction

    Article • Journal of Applied Physics, May 2015, American Institute of Physics

    Professor Philip J Withers

  128. Employing temporal self-similarity across the entire time domain in computed tomography reconstruction

    Article • Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences, May 2015, Royal Society Publishing

    Professor Philip J Withers

  129. Comparison and combination of imaging techniques for three dimensional analysis of electrical trees

    Article • IEEE Transactions on Dielectrics and Electrical Insulation, April 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  130. Effect of sugar on bread dough aeration during mixing

    Article • Journal of Food Engineering, April 2015, Elsevier

    Professor Philip J Withers

  131. Diffraction tomography of strain

    Article • Inverse Problems, March 2015, Institute of Physics Publishing

    Professor Philip J Withers

  132. Assessment of surface integrity of Ni superalloy after electrical-discharge, laser and mechanical micro-drilling processes

    Article • The International Journal of Advanced Manufacturing Technology, March 2015, Springer Science + Business Media

    Professor Philip J Withers

  133. Residual stresses due to foreign object damage in laser-shock peened aerofoils: Simulation and measurement

    Article • Mechanics of Materials, March 2015, Elsevier

    Professor Philip J Withers

  134. 4D-CT reconstruction with unified spatial-temporal patch-based regularization

    Article • Inverse Problems and Imaging, March 2015, American Institute of Mathematical Sciences (AIMS)

    Professor Philip J Withers

  135. Influence of processing conditions on strut structure and compressive properties of cellular lattice structures fabricated by selective laser melting

    Article • Materials Science and Engineering A, March 2015, Elsevier

    Professor Philip J Withers

  136. Measuring overload effects during fatigue crack growth in bainitic steel by synchrotron X-ray diffraction

    Article • International Journal of Fatigue, February 2015, Elsevier

    Professor Philip J Withers

  137. The effect of density and feature size on mechanical properties of isostructural metallic foams produced by additive manufacturing

    Article • Acta Materialia, February 2015, Elsevier

    Professor Philip J Withers

  138. Full-field energy-dispersive powder diffraction imaging using laboratory X-rays

    Article • Journal of Applied Crystallography, January 2015, International Union of Crystallography

    Dr Simon D M Jacques, Professor Philip J Withers

  139. Fracture mechanics by three-dimensional crack-tip synchrotron X-ray microscopy

    Article • Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences, January 2015, Royal Society Publishing

    Professor Philip J Withers

  140. Three-dimensional characterization of electrodeposited lithium microstructures using synchrotron X-ray phase contrast imaging

    Article • Chemical Communications, January 2015, Royal Society of Chemistry

    Professor Philip J Withers

  141. Strain-rate sensitivity of foam materials: A numerical study using 3D image-based finite element model

    Article • EPJ Web of Conferences, January 2015, EDP Sciences

    Professor Philip J Withers

  142. Evolution of a laser shock peened residual stress field locally with foreign object damage and subsequent fatigue crack growth

    Article • Acta Materialia, January 2015, Elsevier

    Professor Philip J Withers

  143. The role of crack branching in stress corrosion cracking of aluminium alloys

    Article • Corrosion Reviews, January 2015, De Gruyter

    Professor Philip J Withers

  144. Fatigue Behavior of Shot Peened Notched Specimens: Effect of the Residual Stress Field Ahead of the Notch Root

    Article • Procedia Engineering, January 2015, Elsevier

    Professor Philip J Withers

  145. Two-dimensional X-ray CT image based meso-scale fracture modelling of concrete

    Article • Engineering Fracture Mechanics, January 2015, Elsevier

    Professor Philip J Withers

  146. Phase transition modeling of polytetrafluoroethylene during Taylor impact

    Article • Journal of Applied Physics, December 2014, American Institute of Physics

    Professor Philip J Withers

  147. Investigation of the elastic/crystallographic anisotropy of welds for improved ultrasonic inspections

    Article • Materials Characterization, December 2014, Elsevier

    Professor Philip J Withers

  148. The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy

    Article • Journal of Alloys and Compounds, December 2014, Elsevier

    Professor Philip J Withers

  149. Three dimensional imaging of electrical trees in micro and nano-filled epoxy resin

    Article • October 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  150. Modelling the effect of elastic and plastic anisotropies on stresses at grain boundaries

    Article • International Journal of Plasticity, October 2014, Elsevier

    Professor Philip J Withers

  151. Optimal Iodine Staining of Cardiac Tissue for X-Ray Computed Tomography

    Article • PLoS ONE, August 2014, PLOS

    Professor Philip J Withers

  152. Multimodal Image Reconstruction Using Supplementary Structural Information in Total Variation Regularization

    Article • Sensing and Imaging, August 2014, Springer Science + Business Media

    Professor Philip J Withers

  153. Or how diffraction peaks can broaden based on dislocation types as much as dislocation density

    Article • Journal of Applied Crystallography, August 2014, International Union of Crystallography

    Dr Thomas H Simm, Thomas Simm, Professor Philip J Withers

  154. Multiscale 3D analysis of creep cavities in AISI type 316 stainless steel

    Article • Materials Science and Technology, August 2014, Taylor & Francis

    Professor Philip J Withers

  155. Influence of Surface Anomalies Following Hole Making Operations on the Fatigue Performance for a Nickel-Based Superalloy

    Article • Journal of Manufacturing Science and Engineering, August 2014, ASME International

    Professor Philip J Withers

  156. High Pressure Interpass Rolling of Wire + Arc Additively Manufactured Titanium Components

    Article • Advanced Materials Research, August 2014, Trans Tech Publications

    Matthew J Roy, Professor Philip J Withers

  157. A new method for quantifying anisotropic martensitic transformation strains accumulated during constrained cooling

    Article • Materials Science and Engineering A, August 2014, Elsevier

    Professor Philip J Withers

  158. Development of Simplified Empirical Phase Transformation Model for Use in Welding Residual Stress Simulations

    Article • July 2014, ASME International

    Professor Philip J Withers

  159. On the Thermo-Mechanical Behaviour of SA508 Grade 4 Ferritic Steel

    Article • July 2014, ASME International

    Professor Philip J Withers

  160. A multiscale modelling analysis of the contribution of crystalline elastic anisotropy to intergranular stresses in ferroelectric materials

    Article • Journal of Physics D Applied Physics, July 2014, Institute of Physics Publishing

    Professor Philip J Withers

  161. A novel technique to incorporate structural prior information into multi-modal tomographic reconstruction

    Article • Inverse Problems, May 2014, Institute of Physics Publishing

    Professor Philip J Withers

  162. Identification of crystalline elastic anisotropy in PZT ceramics from in-situ blocking stress measurements

    Article • Journal of Applied Physics, May 2014, American Institute of Physics

    Professor Philip J Withers

  163. The influence of shock-loading path on the spallation response of Ta

    Article • Journal of Physics Conference Series, May 2014, Institute of Physics Publishing

    Professor Philip J Withers

  164. Three-dimensional characterisation and simulation of deformation and damage during Taylor impact in PTFE

    Article • Journal of Physics Conference Series, May 2014, Institute of Physics Publishing

    Professor Philip J Withers

  165. X-ray microtomography study of the spallation response in Ta-W

    Article • Journal of Physics Conference Series, May 2014, Institute of Physics Publishing

    Professor Philip J Withers

  166. A new method of performance verification for x-ray computed tomography measurements

    Article • Measurement Science and Technology, April 2014, Institute of Physics Publishing

    Professor Philip J Withers

  167. Correlative Tomography

    Article • Scientific Reports, April 2014, Springer Science + Business Media

    Professor Philip J Withers, Dr Cem Örnek

  168. A multiscale model for reversible ferroelectric behaviour of polycrystalline ceramics

    Article • Mechanics of Materials, April 2014, Elsevier

    Professor Philip J Withers

  169. The application of phase contrast X-ray techniques for imaging Li-ion battery electrodes

    Article • Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms, April 2014, Elsevier

    Professor Philip J Withers

  170. The production and characterization of topologically and mechanically gradient open-cell thermoplastic foams

    Article • Smart Materials and Structures, March 2014, Institute of Physics Publishing

    Professor Philip J Withers

  171. Micro-CT Evaluation of Voids in the Filling Material of Single-Rooted Teeth Obturated with Different Techniques

    Article • Journal of Research and Practice in Dentistry, March 2014, IBIMA Publishing

    Professor Philip J Withers

  172. Combining X-ray microtomography and three-dimensional digital volume correlation to track microstructure evolution during sintering of copper powder

    Article • The Journal of Strain Analysis for Engineering Design, March 2014, SAGE Publications

    Professor Philip J Withers

  173. Imaging and analysis techniques for electrical trees using X-ray computed tomography

    Article • IEEE Transactions on Dielectrics and Electrical Insulation, February 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  174. Imaging and analysis techniques for electrical trees using X-ray computed tomography

    Article • IEEE Transactions on Dielectrics and Electrical Insulation, February 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  175. Image based modelling of microstructural heterogeneity in LiFePO 4 electrodes for Li-ion batteries

    Article • Journal of Power Sources, February 2014, Elsevier

    Professor Philip J Withers

  176. Back Stress Work Hardening Confirmed by Bauschinger Effect in a TRIP Steel Using Bending Tests

    Article • ISIJ International, January 2014, Iron and Steel Institute of Japan

    Professor Philip J Withers

  177. Characterising the Integrity of Machined Surfaces in a Powder Nickel Alloy used in Aircraft Engines

    Article • Procedia CIRP, January 2014, Elsevier

    Professor Philip J Withers

  178. Comparison of tool wear mechanisms and surface integrity for dry and wet micro-drilling of nickel-base superalloys

    Article • International Journal of Machine Tools and Manufacture, January 2014, Elsevier

    Professor Philip J Withers

  179. Micro-CT evaluation of the effectiveness of the combined use of rotary and hand instrumentation in removal of Resilon

    Article • Dental Materials Journal, January 2014, Japanese Society for Dental Materials and Devices

    Professor Philip J Withers

  180. Oxygen transport through supported Ba0.5Sr0.5Co0.8Fe0.2O3−δ membranes

    Article • Separation and Purification Technology, January 2014, Elsevier

    Professor Philip J Withers

  181. The effect of minimum dwell cycles on the environmental and fatigue response of RR1000

    Article • MATEC Web of Conferences, January 2014, EDP Sciences

    Professor Philip J Withers

  182. Quantitative X-ray tomography

    Article • International Materials Reviews, December 2013, Taylor & Francis

    Dr eric maire, Professor Philip J Withers

  183. Three-dimensional observation and image-based modelling of thermal strains in polycrystalline alumina

    Article • Acta Materialia, December 2013, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  184. Elastic and plastic strain effects on eddy current response of aluminium alloys

    Article • Nondestructive Testing And Evaluation, December 2013, Taylor & Francis

    Professor Philip J Withers

  185. Damage development in open-hole composite specimens in fatigue. Part 1: Experimental investigation

    Article • Composite Structures, December 2013, Elsevier

    Professor Philip J Withers

  186. Lithiation-Induced Dilation Mapping in a Lithium-Ion Battery Electrode by 3D X-Ray Microscopy and Digital Volume Correlation

    Article • Advanced Energy Materials, November 2013, Wiley

    Professor Philip J Withers

  187. Effect of overload on crack closure in thick and thin specimens via digital image correlation

    Article • International Journal of Fatigue, November 2013, Elsevier

    Professor Philip J Withers

  188. In Situ Synchrotron Studies of Reversible and Irreversible Non-elastic Strain in a Two-Phase TiAl Alloy

    Article • Metallurgical and Materials Transactions A, October 2013, Springer Science + Business Media

    Professor Philip J Withers

  189. Three dimensional characterisation of electrical trees

    Article • October 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  190. A Graphical Processing Unit–Based Parallel Implementation of Multiplicative Algebraic Reconstruction Technique Algorithm for Limited View Tomography

    Article • Research in Nondestructive Evaluation, October 2013, Taylor & Francis

    Professor Philip J Withers

  191. Comparison of the Mechanical Behaviour of Standard and Auxetic Foams by X-ray Computed Tomography and Digital Volume Correlation

    Article • Strain, September 2013, Wiley

    Professor Philip J Withers

  192. Bread dough aeration dynamics during pressure step-change mixing: Studies by X-ray tomography, dough density and population balance modelling

    Article • Chemical Engineering Science, September 2013, Elsevier

    Professor Philip J Withers

  193. Synchrotron X-ray Diffraction

    Article • August 2013, Wiley

    Professor Philip J Withers

  194. On the three-dimensional structure of WC grains in cemented carbides

    Article • Acta Materialia, August 2013, Elsevier

    Professor Philip J Withers

  195. The Influence of Geometry on Residual Stress Around Repair Welds

    Article • July 2013, ASME International

    Professor Philip J Withers

  196. Influence of wall roughness and packing density on stagnant zone formation during funnel flow discharge from a silo: An X-ray imaging study

    Article • Chemical Engineering Science, June 2013, Elsevier

    Professor Philip J Withers

  197. Analysis of a prehistoric Egyptian iron bead with implications for the use and perception of meteorite iron in ancient Egypt

    Article • Meteoritics and Planetary Science, May 2013, Wiley

    Professor Philip J Withers

  198. Metamorphosis revealed: time-lapse three-dimensional imaging inside a living chrysalis

    Article • Journal of The Royal Society Interface, May 2013, Royal Society Publishing

    Dr Russell J Garwood, Professor Philip J Withers

  199. The effect of β phase on microstructure and texture evolution during thermomechanical processing of α+β Ti alloy

    Article • Acta Materialia, May 2013, Elsevier

    Professor Philip J Withers

  200. Study of overload effects in bainitic steel by synchrotron X-ray diffraction

    Article • Frattura ed Integrità Strutturale, April 2013, Gruppo Italiano Frattura

    Professor Philip J Withers

  201. A novel architecture for pore network modelling with applications to permeability of porous media

    Article • Journal of Hydrology, April 2013, Elsevier

    Professor Philip J Withers

  202. Saurichthys (Pisces, Actinopterygii) teeth from the Lower Triassic of Spitsbergen, with comments on their stable isotope composition (δ13C and δ18O) and X−ray microtomography

    Article • Polish Polar Research, March 2013, De Gruyter

    Professor Philip J Withers

  203. The Role of Cross-Sectional Geometry, Curvature, and Limb Posture in Maintaining Equal Safety Factors: A Computed Tomography Study

    Article • The Anatomical Record, February 2013, Wiley

    Dr Charlotte Anne Brassey, Professor Philip J Withers

  204. An anisotropic enhanced thermal conductivity approach for modelling laser melt pools for Ni-base super alloys

    Article • Applied Mathematical Modelling, February 2013, Elsevier

    Professor Philip J Withers

  205. Eigenstrain modelling of residual stress generated by arrays of laser shock peening shots and determination of the complete stress field using limited strain measurements

    Article • Surface and Coatings Technology, February 2013, Elsevier

    Professor Philip J Withers

  206. Fault location and diagnosis in a medium voltage EPR power cable

    Article • IEEE Transactions on Dielectrics and Electrical Insulation, February 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  207. Revealing the three dimensional internal structure of aluminium alloys

    Article • Surface and Interface Analysis, January 2013, Wiley

    Dr Michele Curioni, Professor Philip J Withers

  208. Application of Micro-Computed Tomography With Iodine Staining to Cardiac Imaging, Segmentation, and Computational Model Development

    Article • IEEE Transactions on Medical Imaging, January 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Henggui Zhang, Professor Philip J Withers

  209. Imaging cracks in hostile regimes

    Article • Nature Materials, January 2013, Springer Science + Business Media

    Professor Philip J Withers

  210. Characterizing the effects of elevated temperature on the air void pore structure of advanced gas-cooled reactor pressure vessel concrete using x-ray computed tomography

    Article • EPJ Web of Conferences, January 2013, EDP Sciences

    Professor Philip J Withers

  211. Residual stresses caused by head-on and 45° foreign object damage for a laser shock peened Ti–6Al–4V alloy aerofoil

    Article • Materials Science and Engineering A, January 2013, Elsevier

    Professor Philip J Withers

  212. Residual stress fields after FOD impact on flat and aerofoil-shaped leading edges

    Article • Mechanics of Materials, December 2012, Elsevier

    Professor Philip J Withers

  213. Three-dimensional imaging of inhomogeneous lithologies using X-ray computed tomography: characterization of drill core from the Borrowdale Volcanic Group

    Article • Mineralogical Magazine, December 2012, Mineralogical Society

    Professor Philip J Withers

  214. Work hardening induced by martensite during transformation-induced plasticity in plain carbon steel

    Article • Acta Materialia, December 2012, Elsevier

    Professor Philip J Withers

  215. Finite element modelling versus classic beam theory: comparing methods for stress estimation in a morphologically diverse sample of vertebrate long bones

    Article • Journal of The Royal Society Interface, November 2012, Royal Society Publishing

    Dr Charlotte Anne Brassey, Professor Philip J Withers, Lee Margetts

  216. A new species of Craspedisia (Araneae: Theridiidae) in Miocene Dominican amber, imaged using X-ray computed tomography

    Article • Paleontological Journal, November 2012, Pleiades Publishing Ltd

    Professor Philip J Withers

  217. Dependence of dielectric behavior in BiFeO3 ceramics on intrinsic defects

    Article • Journal of Alloys and Compounds, November 2012, Elsevier

    Professor Philip J Withers

  218. MRI measurements of vessel calibre in tumour xenografts: Comparison with vascular corrosion casting

    Article • Microvascular Research, November 2012, Elsevier

    Professor Philip J Withers

  219. Effects of Cooling Rates on Glass Formation and Magnetic Behavior for the Fe73.0C7.0Si3.3B5.0P8.7Mo3.0 Bulk Metallic Glass

    Article • Metallurgical and Materials Transactions A, October 2012, Springer Science + Business Media

    Professor Philip J Withers

  220. Ancient Ephemeroptera–Collembola Symbiosis Fossilized in Amber Predicts Contemporary Phoretic Associations

    Article • PLoS ONE, October 2012, PLOS

    Professor Philip J Withers

  221. A novel approach for imaging of electrical trees

    Article • October 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  222. Tomographic Reconstruction of Neopterous Carboniferous Insect Nymphs

    Article • PLoS ONE, September 2012, PLOS

    Dr Russell J Garwood, Professor Philip J Withers

  223. Hole-Drilling Residual Stress Measurement with Artifact Correction Using Full-Field DIC

    Article • September 2012, Springer Science + Business Media

    Professor Philip J Withers

  224. Fourier basis for the engineering assessment of cracks in residual stress fields

    Article • Engineering Fracture Mechanics, September 2012, Elsevier

    Professor Philip J Withers

  225. Fatigue and Damage in Structural Materials Studied by X-Ray Tomography

    Article • Annual Review of Materials Science, August 2012, Annual Reviews

    Professor Philip J Withers

  226. Microstructure of In Situ Mg Metal Matrix Composites Based on Silica Nanoparticles

    Article • Solid State Phenomena, August 2012, Trans Tech Publications

    Professor Philip J Withers

  227. An evaluation of the evolution of workpiece surface integrity in hole making operations for a nickel-based superalloy

    Article • Journal of Materials Processing Technology, August 2012, Elsevier

    Professor Philip J Withers

  228. Stress Residual

    Article • July 2012, Wiley

    Professor Philip J Withers

  229. Techniques for electrical tree imaging

    Article • July 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  230. Investigation of interfacial properties of atmospheric plasma sprayed thermal barrier coatings with four-point bending and computed tomography technique

    Article • Surface and Coatings Technology, July 2012, Elsevier

    Professor Philip J Withers

  231. Piezomorphic Materials

    Article • Macromolecular Materials and Engineering, June 2012, Wiley

    Professor Philip J Withers

  232. Hole-Drilling Residual Stress Measurement with Artifact Correction Using Full-Field DIC

    Article • Experimental Mechanics, June 2012, Springer Science + Business Media

    Professor Philip J Withers

  233. Macro and intergranular stress responses of austenitic stainless steel to 90° strain path changes

    Article • Materials Science and Engineering A, June 2012, Elsevier

    Professor Philip J Withers

  234. Exploring microstructural changes associated with oxidation in Ni–YSZ SOFC electrodes using high resolution X-ray computed tomography

    Article • Solid State Ionics, May 2012, Elsevier

    Professor Philip J Withers

  235. On the evolution of local material properties and residual stress in a three-pass SA508 steel weld

    Article • Acta Materialia, May 2012, Elsevier

    Professor Philip J Withers

  236. Evolution of crack-bridging and crack-tip driving force during the growth of a fatigue crack in a Ti/SiC composite

    Article • Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences, April 2012, Royal Society Publishing

    Professor Philip J Withers

  237. Friction Stir Welding in HSLA-65 Steel: Part I. Influence of Weld Speed and Tool Material on Microstructural Development

    Article • Metallurgical and Materials Transactions A, April 2012, Springer Science + Business Media

    Professor Philip J Withers

  238. X-ray damage characterisation in self-healing fibre reinforced polymers

    Article • Composites Part A Applied Science and Manufacturing, April 2012, Elsevier

    Professor Philip J Withers

  239. Overload effects on fatigue crack-tip fields under plane stress conditions: surface and bulk analysis

    Article • Fatigue & Fracture of Engineering Materials & Structures, March 2012, Wiley

    Professor Philip J Withers

  240. Submicron-scale depth profiling of residual stress in amorphous materials by incremental focused ion beam slotting

    Article • Acta Materialia, March 2012, Elsevier

    Professor Philip J Withers

  241. Fibre bridging during high temperature fatigue crack growth in Ti/SiC composites

    Article • Acta Materialia, February 2012, Elsevier

    Professor Philip J Withers

  242. In-situ X-ray microtomography study of the movement of a granular material within a die

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), February 2012, Carl Hanser Verlag

    Professor Philip J Withers

  243. Spallation response of Ti-6Al-4V: Rear surface velocimetry and X-ray tomography

    Article • January 2012, American Institute of Physics

    Professor Philip J Withers

  244. Un supplément à la liste des syrphes (Diptera, Syrphidae) de l'Ain et du Rhône, et liste préliminaire de ceux de la Loire

    Article • Bulletin mensuel de la Société linnéenne de Lyon, January 2012, PERSEE Program

    Professor Philip J Withers

  245. Characterization of Cement Microstructure for the Immobilization of Nuclear Waste Using Advanced Imaging Methods

    Article • MRS Proceedings, January 2012, Cambridge University Press

    Professor Philip J Withers

  246. Effects of stop–start features on residual stresses in a multipass austenitic stainless steel weld

    Article • International Journal of Pressure Vessels and Piping, January 2012, Elsevier

    Professor Philip J Withers

  247. Multi Length Scale Microstructural Investigations of a Commercially Available Li-Ion Battery Electrode

    Article • Journal of The Electrochemical Society, January 2012, The Electrochemical Society

    Professor Philip J Withers

  248. Fibre bundles in the human extensor carpi ulnaris tendon are arranged in a spiral

    Article • Journal of Hand Surgery (European Volume), December 2011, SAGE Publications

    Professor Philip J Withers

  249. Surface Decoration for Improving the Accuracy of Displacement Measurements by Digital Image Correlation in SEM

    Article • Experimental Mechanics, November 2011, Springer Science + Business Media

    Professor Philip J Withers

  250. A minute fossil phoretic mite recovered by phase-contrast X-ray computed tomography

    Article • Proceedings of the Royal Society B Biological Sciences, November 2011, Royal Society Publishing

    Professor Philip J Withers

  251. 3D Crack-tip Microscopy: Illuminating Micro-Scale Effects on Crack-Tip Behavior

    Article • Advanced Engineering Materials, September 2011, Wiley

    Professor Philip J Withers

  252. Guest Editorial

    Article • The Journal of Strain Analysis for Engineering Design, September 2011, SAGE Publications

    Professor Philip J Withers

  253. A Comparison of Residual Stress Development in Inertia Friction Welded Fine Grain and Coarse Grain Nickel-Base Superalloy

    Article • Metallurgical and Materials Transactions A, September 2011, Springer Science + Business Media

    Professor Philip J Withers

  254. Assessment of machining performance using the wear map approach in micro-drilling

    Article • The International Journal of Advanced Manufacturing Technology, August 2011, Springer Science + Business Media

    Professor Philip J Withers

  255. Assessment of the Deformation of Low Density Polymeric Auxetic Foams by X-Ray Tomography and Digital Volume Correlation

    Article • Applied Mechanics and Materials, August 2011, Trans Tech Publications

    Professor Fabrice Pierron, Professor Philip J Withers

  256. Comparison of methods to determine variations in unstrained unit cell parameter across welds

    Article • The Journal of Strain Analysis for Engineering Design, August 2011, SAGE Publications

    Professor Philip J Withers

  257. Microstructure and properties of hot isostatically pressed powder and extruded Ti25V15Cr2Al0·2C

    Article • Materials Science and Technology, August 2011, Taylor & Francis

    Professor Philip J Withers

  258. Porting the AVS/Express scientific visualization software to Cray XT4

    Article • Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences, July 2011, Royal Society Publishing

    Professor Philip J Withers

  259. A method for the 3-D quantification of bridging ligaments during crack propagation

    Article • Scripta Materialia, July 2011, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  260. X-Ray Microtomography for 3D Microstructure Characterization of Magnesium Matrix Composite Reinforced with Glassy Carbon Particles

    Article • Solid State Phenomena, June 2011, Trans Tech Publications

    Professor Philip J Withers

  261. Micron-Scale Residual Stress Measurement by Micro-Hole Drilling and Digital Image Correlation

    Article • Experimental Mechanics, May 2011, Springer Science + Business Media

    Professor Philip J Withers

  262. A combined approach to microstructure mapping of an Al–Li AA2199 friction stir weld

    Article • Acta Materialia, May 2011, Elsevier

    Professor Philip J Withers

  263. Cranial anatomy ofThalassiodracon hawkinsii(Reptilia, Plesiosauria) from the Early Jurassic of Somerset, United Kingdom

    Article • Journal of Vertebrate Paleontology, May 2011, Taylor & Francis

    Professor Philip J Withers

  264. Computed tomography recovers data from historical amber: an example from huntsman spiders

    Article • The Science of Nature, April 2011, Springer Science + Business Media

    Professor Philip J Withers

  265. Suppression of ring artefacts when tomographing anisotropically attenuating samples

    Article • Journal of Synchrotron Radiation, April 2011, International Union of Crystallography

    Professor Philip J Withers

  266. Design of weld fillers for mitigation of residual stresses in ferritic and austenitic steel welds

    Article • Science and Technology of Welding & Joining, April 2011, Taylor & Francis

    Professor Philip J Withers

  267. Friction Stir Welding of HSLA-65 Steel: Part II. The Influence of Weld Speed and Tool Material on the Residual Stress Distribution and Tool Wear

    Article • Metallurgical and Materials Transactions A, March 2011, Springer Science + Business Media

    Professor Philip J Withers

  268. Depth and Lateral Variation of Machining-Induced Residual Stress for a Nickel Base Superalloy

    Article • Materials Science Forum, March 2011, Trans Tech Publications

    Professor Philip J Withers

  269. Measurement of Residual Stresses in Surface Treated Stainless Steel Groove Welds

    Article • Materials Science Forum, March 2011, Trans Tech Publications

    Professor Philip J Withers

  270. Residual stresses in laser direct metal deposited Waspaloy

    Article • Materials Science and Engineering A, March 2011, Elsevier

    Professor Philip J Withers

  271. Thermal Relaxation of Residual Stresses in Nickel-Based Superalloy Inertia Friction Welds

    Article • Metallurgical and Materials Transactions A, February 2011, Springer Science + Business Media

    Professor Philip J Withers

  272. In-Situ Observation and Modelling of Intergranular Cracking in Polycrystalline Alumina

    Article • Key Engineering Materials, January 2011, Trans Tech Publications

    Prof Thomas J Marrow, Professor Philip J Withers

  273. Microstructural Characterization of SOFC Electrodes: Observations and Simulations

    Article • January 2011, The Electrochemical Society

    Professor Philip J Withers

  274. A REGION OF INTEREST COMPUTED TOMOGRAPHY TECHNIQUE FOR INSPECTION OF CFRP LAMINATES

    Article • January 2011, American Institute of Physics

    Professor Philip J Withers

  275. Crack Tip Behaviour in Residual Stress Field: Finite Element Modelling and Neutron Diffraction Measurements

    Article • January 2011, ASME International

    Professor Philip J Withers

  276. Mapping Residual-Stress Distributions in a Laser-Peened Vit-105 Bulk-Metallic Glass Using the Focused-Ion-Beam Micro-Slitting Method

    Article • MRS Proceedings, January 2011, Cambridge University Press

    Professor Philip J Withers

  277. Modelling the Interpass Temperature Effect on Residual Stress in Low Transformation Temperature Stainless Steel Welds

    Article • January 2011, ASME International

    Professor Philip J Withers

  278. Using Synchrotron X-Ray Nano-CT to Characterize SOFC Electrode Microstructures in Three-Dimensions at Operating Temperature

    Article • Electrochemical and Solid-State Letters, January 2011, The Electrochemical Society

    Professor Philip J Withers

  279. Evaluation of surface integrity in micro drilling process for nickel-based superalloy

    Article • The International Journal of Advanced Manufacturing Technology, December 2010, Springer Science + Business Media

    Professor Philip J Withers

  280. Metal-Based Composite Materials for High-Temperature Application

    Article • December 2010, Wiley

    Professor Philip J Withers

  281. Region-of-interest tomography using filtered backprojection: assessing the practical limits

    Article • Journal of Microscopy, December 2010, Wiley

    Professor Philip J Withers

  282. An analytical formula for ring artefact suppression in X-ray tomography

    Article • Applied Mathematics Letters, December 2010, Elsevier

    Professor Philip J Withers

  283. Effects of superimposed electric field and porosity on the hydrostatic pressure-induced rhombohedral to orthorhombic martensitic phase transformation in PZT 95/5 ceramics

    Article • Acta Materialia, December 2010, Elsevier

    Professor Philip J Withers

  284. Corrigendum to “Shear cracking in an Al powder compact studied by X-ray microtomography” [Mater. Sci. Eng. A 508 (2009) 64–70]

    Article • Materials Science and Engineering A, November 2010, Elsevier

    Professor Philip J Withers

  285. Nanotomography for understanding materials degradation

    Article • Scripta Materialia, October 2010, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  286. Comparison of the X-ray performance of small pixel CdTe and CZT detectors

    Article • October 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  287. Interfacial shear strength behaviour of Ti/SiC metal matrix composites at room and elevated temperature

    Article • Acta Materialia, October 2010, Elsevier

    Professor Philip J Withers

  288. Non-contact characterization of hybrid aluminium/carbon-fibre-reinforced plastic sheets using multi-frequency eddy-current sensors

    Article • Measurement Science and Technology, September 2010, Institute of Physics Publishing

    Professor Philip J Withers

  289. Assessment of Thread-Cutting Strategies to Enable Damage-Tolerant Surfaces on an Advanced Ni-Based Aerospace Superalloy

    Article • Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture, September 2010, SAGE Publications

    Professor Philip J Withers

  290. The pulsed eddy current response to applied loading of various aluminium alloys

    Article • NDT & E International, September 2010, Elsevier

    Professor Philip J Withers

  291. Imaging fossilised spiders in amber using lab-based phase contrast x-ray tomography

    Article • August 2010, SPIE

    Professor Philip J Withers

  292. Regularization methods for inverse problems in x-ray tomography

    Article • August 2010, SPIE

    Professor Philip J Withers

  293. An examination of phase retrieval algorithms as applied to phase contrast tomography using laboratory sources

    Article • August 2010, SPIE

    Professor Philip J Withers

  294. In situ 3D X-ray microtomography study comparing auxetic and non-auxetic polymeric foams under tension

    Article • physica status solidi (b), August 2010, Wiley

    Professor Philip J Withers

  295. Prediction of residual stress distributions for single weld beads deposited on to SA508 steel including phase transformation effects

    Article • Materials Science and Technology, August 2010, Taylor & Francis

    Professor Philip J Withers

  296. Process–microstructure–property correlations in Al–Li AA2199 friction stir welds

    Article • Science and Technology of Welding & Joining, August 2010, Taylor & Francis

    Professor Philip J Withers

  297. Deformation twinning in Ti-6Al-4V during low strain rate deformation to moderate strains at room temperature

    Article • Materials Science and Engineering A, August 2010, Elsevier

    Professor Philip J Withers

  298. Improved tomographic reconstructions using adaptive time-dependent intensity normalization

    Article • Journal of Synchrotron Radiation, July 2010, International Union of Crystallography

    Professor Philip J Withers

  299. Noncontact evaluation of the dependency of electrical conductivity on stress for various Al alloys as a function of plastic deformation and annealing

    Article • Journal of Applied Physics, July 2010, American Institute of Physics

    Professor Philip J Withers

  300. 3D inspection of fabrication and degradation processes from X-ray (micro) tomography images using a hole closing algorithm

    Article • July 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Prof Thomas J Marrow, Professor Philip J Withers

  301. The evolution of crack-tip stresses during a fatigue overload event

    Article • Acta Materialia, June 2010, Elsevier

    Dr Anton Shterenlikht, Professor Philip J Withers

  302. Mapping Residual Stress Profiles at the Micron Scale Using FIB Micro-Hole Drilling

    Article • Applied Mechanics and Materials, June 2010, Trans Tech Publications

    Professor Philip J Withers

  303. A prioriinformation in a regularized sinogram-based method for removing ring artefacts in tomography

    Article • Journal of Synchrotron Radiation, May 2010, International Union of Crystallography

    Professor Philip J Withers

  304. Engineering the residual stress state and microstructure of stainless steel with mechanical surface treatments

    Article • Applied Physics A, May 2010, Springer Science + Business Media

    Professor Philip J Withers

  305. The Deformation of Face-Centred-Cubic Metals Measured by Diffraction Peak Profile Analysis

    Article • Materials Science Forum, May 2010, Trans Tech Publications

    Thomas Simm, Dr Thomas H Simm, Professor Philip J Withers

  306. The Use of Diffraction to Study Fatigue Crack Tip Mechanics

    Article • Materials Science Forum, May 2010, Trans Tech Publications

    Professor Philip J Withers

  307. Synchrotron Strain Mapping of the Residual Strain Distribution around Foreign Object Damage in Laser Shock Peened Ti-6AL-4V Alloy

    Article • Materials Science Forum, May 2010, Trans Tech Publications

    Professor Philip J Withers

  308. Application of anisotropic inclusion theory to the deformation of Ni based single crystal superalloys: Stress–strain curves determination

    Article • Mechanics of Materials, March 2010, Elsevier

    Professor Philip J Withers

  309. Predicting the onset of rafting of γ′ precipitates by channel deformation in a Ni superalloy

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, February 2010, Taylor & Francis

    Professor Philip J Withers

  310. Efficacy of active cooling for controlling residual stresses in friction stir welds

    Article • Science and Technology of Welding & Joining, February 2010, Taylor & Francis

    Professor Philip J Withers

  311. Annealing Models in Welding Simulation: Conservative and Non-Conservative Residual Stress Distributions

    Article • January 2010, ASME International

    Professor Philip J Withers

  312. Un cas de myiase humaine en France due à Sarcophaga (Liopygia) argyrostoma (Diptera, Sarcophagidae)

    Article • Bulletin mensuel de la Société linnéenne de Lyon, January 2010, PERSEE Program

    Professor Philip J Withers

  313. A Comparison of Residual Stresses in Single-Pass and Multipass SA508 Steel Welds

    Article • January 2010, ASME International

    Professor Philip J Withers

  314. Investigation of Transformation Induced Plasticity and Residual Stress Analysis in Stainless Steel Welds

    Article • January 2010, ASME International

    Professor Philip J Withers

  315. EDITORIAL

    Article • International Materials Reviews, January 2010, Taylor & Francis

    Professor Philip J Withers

  316. Mapping Residual Stress Distributions at the Micron Scale in Amorphous Materials

    Article • Metallurgical and Materials Transactions A, December 2009, Springer Science + Business Media

    Professor Philip J Withers

  317. Prediction of hardness minimum locations during natural aging in an aluminum alloy 6061-T6 friction stir weld

    Article • Journal of Materials Science, September 2009, Springer Science + Business Media

    Professor Philip J Withers

  318. Biomechanics of Dromaeosaurid Dinosaur Claws: Application of X‐Ray Microtomography, Nanoindentation, and Finite Element Analysis

    Article • The Anatomical Record, August 2009, Wiley

    Phillip Manning, Professor Paul M Mummery, Professor Philip J Withers, Lee Margetts

  319. A ring artifact suppression algorithm based on a priori information

    Article • Applied Physics Letters, August 2009, American Institute of Physics

    Professor Philip J Withers

  320. Stainless steel weld metal designed to mitigate residual stresses

    Article • Science and Technology of Welding & Joining, August 2009, Taylor & Francis

    Professor HARSHAD K Bhadeshia, Professor Philip J Withers

  321. Image stitching strategies for tomographic imaging of large objects at high resolution at synchrotron sources

    Article • Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment, August 2009, Elsevier

    Professor Philip J Withers

  322. Finite element process modelling of inertia friction welding advanced nickel-based superalloy

    Article • Materials Science and Engineering A, July 2009, Elsevier

    Professor Philip J Withers

  323. Residual stresses in face finish turning of high strength nickel-based superalloy

    Article • Journal of Materials Processing Technology, June 2009, Elsevier

    Professor Philip J Withers

  324. Minor cutting edge–workpiece interactions in drilling of an advanced nickel-based superalloy

    Article • International Journal of Machine Tools and Manufacture, June 2009, Elsevier

    Professor Philip J Withers

  325. The extent of relaxation of weld residual stresses on cutting out cross-weld test-pieces

    Article • Powder Diffraction, June 2009, Cambridge University Press

    Professor Philip J Withers

  326. Comparison of residual stresses in Ti–6Al–4V and Ti–6Al–2Sn–4Zr–2Mo linear friction welds

    Article • Materials Science and Technology, May 2009, Taylor & Francis

    Professor Philip J Withers

  327. High-temperature strain field measurement using digital image correlation

    Article • The Journal of Strain Analysis for Engineering Design, May 2009, SAGE Publications

    Professor Philip J Withers

  328. Non-contact characterisation of Carbon Fibre Reinforced Plastics in hybrid aluminium / CFRP sheets using multi-frequency eddy current sensors

    Article • May 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  329. Shear cracking in an Al powder compact studied by X-ray microtomography

    Article • Materials Science and Engineering A, May 2009, Elsevier

    Professor Philip J Withers

  330. Some experimental observations on crack closure and crack‐tip plasticity

    Article • Fatigue & Fracture of Engineering Materials & Structures, April 2009, Wiley

    Eann Patterson, Dr Anton Shterenlikht, Professor Philip J Withers

  331. Application of anisotropic inclusion theory to the energy evaluation for the matrix channel deformation and rafting geometry of γ−γ′ Ni superalloys

    Article • Materials Science and Engineering A, April 2009, Elsevier

    Professor Philip J Withers

  332. The sensitivity of Ni-based superalloy to hole making operations: Influence of process parameters on subsurface damage and residual stress

    Article • Journal of Materials Processing Technology, April 2009, Elsevier

    Professor Philip J Withers

  333. Friction stir welding of aluminium alloys

    Article • International Materials Reviews, March 2009, Taylor & Francis

    Professor Philip J Withers

  334. Measured residual stress distributions for low and high heat input single weld beads deposited on to SA508 steel

    Article • Materials Science and Technology, March 2009, Taylor & Francis

    Professor Philip J Withers

  335. Characterization of microplasticity in TiAl-based alloys

    Article • Acta Materialia, March 2009, Elsevier

    Professor Philip J Withers

  336. Noncontact Characterization of Carbon-Fiber-Reinforced Plastics Using Multifrequency Eddy Current Sensors

    Article • IEEE Transactions on Instrumentation and Measurement, March 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  337. Residual stress engineering in friction stir welds by roller tensioning

    Article • Science and Technology of Welding & Joining, February 2009, Taylor & Francis

    Professor Philip J Withers

  338. Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy

    Article • Acta Materialia, February 2009, Elsevier

    Professor Philip J Withers

  339. In situ three-dimensional X-ray microtomography of an auxetic foam under tension

    Article • Scripta Materialia, February 2009, Elsevier

    Professor Philip J Withers

  340. Bainite orientation in plastically deformed austenite

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), January 2009, Carl Hanser Verlag

    Professor Philip J Withers

  341. Fatigue crack growth and load redistribution in Ti/SiC composites observed in situ

    Article • Acta Materialia, January 2009, Elsevier

    Professor Philip J Withers

  342. Spatially Resolved Materials Property Data From a Uniaxial Cross-Weld Tensile Test

    Article • Journal of Pressure Vessel Technology, January 2009, ASME International

    Professor Philip J Withers

  343. The Effects of Filler Metal Transformation Temperature on Residual Stresses in a High Strength Steel Weld

    Article • Journal of Pressure Vessel Technology, January 2009, ASME International

    Professor Philip J Withers

  344. Using augmented reality to promote an understanding of materials science to school children

    Article • December 2008, ACM (Association for Computing Machinery)

    Professor Philip J Withers

  345. Inertia friction welds between nickel superalloy components: Analysis of residual stress by eigenstrain distributions

    Article • The Journal of Strain Analysis for Engineering Design, December 2008, SAGE Publications

    Professor Philip J Withers

  346. Real-time acquisition of fatigue crack images for monitoring crack-tip stress intensity variations within fatigue cycles

    Article • The Journal of Strain Analysis for Engineering Design, December 2008, SAGE Publications

    Professor Philip J Withers

  347. Strain Measurement by Digital Image Correlation

    Article • Strain, December 2008, Wiley

    Professor Philip J Withers

  348. Mechanical Tensioning of High-Strength Aluminum Alloy Friction Stir Welds

    Article • Metallurgical and Materials Transactions A, October 2008, Springer Science + Business Media

    Professor Philip J Withers

  349. Application of a micromechanics model to the overall properties of heterogeneous graphite

    Article • Journal of Nuclear Materials, October 2008, Elsevier

    Professor Philip J Withers

  350. Importance of crystal orientation in linear friction joining of single crystal to polycrystalline nickel-based superalloys

    Article • Materials Science and Engineering A, September 2008, Elsevier

    Professor Philip J Withers

  351. Residual strains and microstructure development in single and sequential double sided friction stir welds in RQT-701 steel

    Article • Materials Science and Engineering A, September 2008, Elsevier

    Professor Philip J Withers

  352. Shakedown of deep cold rolling residual stresses in titanium alloys

    Article • Journal of Physics D Applied Physics, August 2008, Institute of Physics Publishing

    Professor Philip J Withers

  353. The stress intensity of mixed mode cracks determined by digital image correlation

    Article • The Journal of Strain Analysis for Engineering Design, August 2008, SAGE Publications

    Dr Anton Shterenlikht, Professor Philip J Withers

  354. Global mechanical tensioning for the management of residual stresses in welds

    Article • Materials Science and Engineering A, August 2008, Elsevier

    Professor Philip J Withers

  355. Residual stress driven creep cracking in AISI Type 316 stainless steel

    Article • Acta Materialia, August 2008, Elsevier

    Professor Philip J Withers

  356. The effect of tensioning and sectioning on residual stresses in aluminium AA7749 friction stir welds

    Article • Materials Science and Engineering A, August 2008, Elsevier

    Professor Philip J Withers

  357. Focus on martensitic transformations

    Article • Materials Science and Technology, August 2008, Taylor & Francis

    Professor Philip J Withers

  358. Comparison using neutron diffraction of martensitic transformation in Fe–Mn–Si shape memory alloys with and without VN precipitates

    Article • Materials Science and Technology, August 2008, Taylor & Francis

    Professor Philip J Withers

  359. Domain switching in rhombohedral PZT ceramics under electrical and mechanical loading

    Article • Materials Science and Technology, August 2008, Taylor & Francis

    Professor Philip J Withers

  360. Characterizing Phase Transformations and Their Effects on Ferritic Weld Residual Stresses with X-Rays and Neutrons

    Article • Metallurgical and Materials Transactions A, July 2008, Springer Science + Business Media

    Professor Philip J Withers

  361. Study of a Crack at a Fastener Hole by Digital Image Correlation

    Article • Experimental Mechanics, July 2008, Springer Science + Business Media

    Eann Patterson, Dr Anton Shterenlikht, Professor Philip J Withers

  362. Micromechanics of domain switching in rhombohedral PZT ceramics

    Article • Ceramics International, May 2008, Elsevier

    Professor Philip J Withers

  363. Synchrotron X-ray studies of austenite and bainitic ferrite

    Article • Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences, April 2008, Royal Society Publishing

    Professor Philip J Withers

  364. A plasticity model for powder compaction processes incorporating particle deformation and rearrangement

    Article • International Journal of Solids and Structures, April 2008, Elsevier

    Professor Philip J Withers

  365. Recent advances in residual stress measurement

    Article • International Journal of Pressure Vessels and Piping, March 2008, Elsevier

    Professor Philip J Withers

  366. Determination of residual stress at weld interruptions by neutron diffraction

    Article • Zeitschrift für Kristallographie Supplements, February 2008, De Gruyter

    Professor Philip J Withers

  367. Residual Stress Measurements in Autogenous SA508 Steel Welds

    Article • January 2008, ASME International

    Professor Philip J Withers

  368. Robotic sample manipulation for stress and texture determination on neutron and synchrotron X-ray diffractometers

    Article • Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment, January 2008, Elsevier

    Professor Philip J Withers

  369. X-ray nanotomography

    Article • Materials Today, December 2007, Elsevier

    Professor Philip J Withers

  370. Residual stress and its role in failure

    Article • Reports on Progress in Physics, November 2007, Institute of Physics Publishing

    Professor Philip J Withers

  371. Methods for obtaining the strain-free lattice parameter when using diffraction to determine residual stress

    Article • Journal of Applied Crystallography, September 2007, International Union of Crystallography

    Professor Philip J Withers

  372. Welding residual stresses in ferritic power plant steels

    Article • Materials Science and Technology, September 2007, Taylor & Francis

    Professor Philip J Withers

  373. Mapping residual and internal stress in materials by neutron diffraction

    Article • Comptes Rendus Physique, September 2007, Elsevier

    Professor Philip J Withers

  374. The shock response, simulation and microstructural determination of a model composite material

    Article • Journal of Materials Science, July 2007, Springer Science + Business Media

    Professor Philip J Withers

  375. The variation of the unstrained lattice parameter in an AA7010 friction stir weld

    Article • Acta Materialia, July 2007, Elsevier

    Professor Philip J Withers

  376. Texture development in Ti–6Al–4V linear friction welds

    Article • Materials Science and Engineering A, June 2007, Elsevier

    Professor Philip J Withers

  377. Characterization of laser peening residual stresses in Al 7075 by synchrotron diffraction and the contour method

    Article • Journal of Neutron Research, June 2007, CrossRef Test Account

    Professor Philip J Withers

  378. Neutron diffraction characterisation of thermomechanical behaviour of Fe-Mn-Si shape memory alloy

    Article • Journal of Neutron Research, June 2007, CrossRef Test Account

    Professor Philip J Withers

  379. Process inspections and the OECD GLP Principles

    Article • The Quality Assurance Journal, June 2007, Wiley

    Professor Philip J Withers

  380. Residual stresses in and around electromagnetically installed rivets measured using synchrotron and neutron diffraction

    Article • Journal of Neutron Research, June 2007, CrossRef Test Account

    Professor Philip J Withers

  381. Editorial

    Article • International Materials Reviews, May 2007, Taylor & Francis

    Professor Krish Chawla, Professor Philip J Withers

  382. FE Modelling of Mechanical Tensioning for Controlling Residual Stresses in Friction Stir Welds

    Article • March 2007, CrossRef Test Account

    Professor Philip J Withers

  383. FE Modelling of Mechanical Tensioning for Controlling Residual Stresses in Friction Stir Welds

    Article • Materials Science Forum, March 2007, Trans Tech Publications

    Professor Philip J Withers

  384. A verified model of laser direct metal deposition using an analytical enthalpy balance method

    Article • January 2007, Laser Institute of America

    Professor Philip J Withers

  385. An anisotropic enhanced thermal conductivity approach for modelling laser melt pools

    Article • January 2007, Laser Institute of America

    Professor Philip J Withers

  386. A Comparison of Measurement and Modelling of Plastically Induced Residual Stresses in a 316H and a Weld 347 Stainless Steel

    Article • January 2007, ASME International

    Professor Philip J Withers

  387. Spatially Resolved Materials Property Data From a Cross-Weld Tensile Test

    Article • January 2007, ASME International

    Professor Philip J Withers

  388. Transformation Temperatures and Welding Residual Stresses in Ferritic Steels

    Article • January 2007, ASME International

    Professor Philip J Withers

  389. Coplanar waveguide scanning microwave profiler

    Article • January 2007, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  390. In-situneutron diffraction study of the rhombohedral to orthorhombic phase transformation in lead zirconate titanate ceramics produced by uniaxial compression

    Article • Philosophical Magazine Letters, January 2007, Taylor & Francis

    Professor Philip J Withers

  391. Dissimilar friction stir welds in AA5083–AA6082: The effect of process parameters on residual stress

    Article • Materials Science and Engineering A, December 2006, Elsevier

    Professor Philip J Withers

  392. Synchrotron X-ray measurement and finite element analysis of residual strain in tungsten inert gas welded aluminum alloy 2024

    Article • Metallurgical and Materials Transactions A, December 2006, Springer Science + Business Media

    Professor Philip J Withers

  393. A comparison of inertia friction welds in three nickel base superalloys

    Article • Materials Science and Engineering A, November 2006, Elsevier

    Professor Philip J Withers

  394. SALSA—A new instrument for strain imaging in engineering materials and components

    Article • Materials Science and Engineering A, November 2006, Elsevier

    Professor Philip J Withers

  395. Effects of fatigue and fretting on residual stresses introduced by laser shock peening

    Article • Materials Science and Engineering A, November 2006, Elsevier

    Professor Philip J Withers

  396. Evolution of intergranular stresses during in situ straining of IF steel with different grain sizes

    Article • Materials Science and Engineering A, November 2006, Elsevier

    Professor Philip J Withers

  397. Microstructure mapping in friction stir welds of 7449 aluminium alloy using SAXS

    Article • Acta Materialia, October 2006, Elsevier

    Professor Philip J Withers

  398. Dynamic Analysis of Residual Stress Introduced by Laser Peening

    Article • September 2006, CrossRef Test Account

    Professor Philip J Withers

  399. SALSA: Advances in Residual Stress Measurement at ILL

    Article • September 2006, CrossRef Test Account

    Professor Philip J Withers

  400. X-ray microtomographic observation of intergranular stress corrosion cracking in sensitised austenitic stainless steel

    Article • Materials Science and Technology, September 2006, Taylor & Francis

    Prof Thomas J Marrow, Professor Philip J Withers

  401. Dynamic Analysis of Residual Stress Introduced by Laser Peening

    Article • Materials Science Forum, September 2006, Trans Tech Publications

    Professor Philip J Withers

  402. SALSA: Advances in Residual Stress Measurement at ILL

    Article • Materials Science Forum, September 2006, Trans Tech Publications

    Professor Philip J Withers

  403. Geometry Effects when Controlling Residual Stresses in Friction Stir Welds by Mechanical Tensioning

    Article • Materials Science Forum, September 2006, Trans Tech Publications

    Professor Philip J Withers

  404. Scanning Microwave Profiler

    Article • September 2006, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Philip J Withers

  405. Crack opening displacements during fatigue crack growth in Ti–SiC fibre metal matrix composites by X-ray tomography

    Article • Materials Science and Technology, September 2006, Taylor & Francis

    Professor Philip J Withers

  406. Three-dimensional imaging of materials by microtomography

    Article • Materials Science and Technology, September 2006, Taylor & Francis

    Professor Philip J Withers

  407. Characterization of the three-dimensional structure of a metallic foam during compressive deformation

    Article • Journal of Microscopy, August 2006, Wiley

    Professor Philip J Withers

  408. Dissimilar friction stir welds in AA5083-AA6082. Part I: Process parameter effects on thermal history and weld properties

    Article • Metallurgical and Materials Transactions A, July 2006, Springer Science + Business Media

    Professor Philip J Withers

  409. Dissimilar friction stir welds in AA5083-AA6082. Part II: Process parameter effects on microstructure

    Article • Metallurgical and Materials Transactions A, July 2006, Springer Science + Business Media

    Professor Philip J Withers

  410. Three dimensional observations and modelling of intergranular stress corrosion cracking in austenitic stainless steel

    Article • Journal of Nuclear Materials, June 2006, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  411. Analysis of elastic strain and crystallographic texture in poled rhombohedral PZT ceramics

    Article • Acta Materialia, June 2006, Elsevier

    Professor Philip J Withers

  412. A deconvolution method for the reconstruction of underlying profiles measured using large sampling volumes

    Article • Journal of Applied Crystallography, May 2006, International Union of Crystallography

    Professor Philip J Withers

  413. In situ analysis of cracks in structural materials using synchrotron X-ray tomography and diffraction

    Article • Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms, May 2006, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  414. Mapping the evolution of density in 3D of thermally oxidised graphite for nuclear applications

    Article • Scripta Materialia, March 2006, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  415. Diode laser metal deposition: The effect of pulsed beam parameters on superalloy microstructure and deposit morphology

    Article • January 2006, Laser Institute of America

    Professor Philip J Withers

  416. Residual Stress Measurement Within a Single Pass Groove Weld Specimen Utilising Neutron Diffraction and the Contour Method

    Article • January 2006, ASME International

    Professor Philip J Withers

  417. Shakedown During Fatigue of Residual Stresses Introduced by Different Mechanical Surface Treatments

    Article • January 2006, ASME International

    Professor Philip J Withers

  418. High-Rate Compaction of Aluminium Alloy Foams

    Article • January 2006, American Institute of Physics

    Professor Philip J Withers

  419. Measurement and Prediction of the Residual Stress Field Generated by Side-Punching

    Article • Journal of Engineering Materials and Technology, January 2006, ASME International

    Professor Philip J Withers

  420. Particle movement during the deep penetration of a granular material studied by X-ray microtomography

    Article • Scripta Materialia, January 2006, Elsevier

    Professor Philip J Withers

  421. The Shock Response, Simulation and Microstructural Determination of an Inert Simulant

    Article • January 2006, American Institute of Physics

    Professor Philip J Withers

  422. Turning of advanced Ni based alloys obtained via powder metallurgy route

    Article • CIRP Annals, January 2006, Elsevier

    Professor Philip J Withers

  423. An evaluation of recurrent neural network modelling for the prediction of damage evolution during forming

    Article • Journal of Materials Processing Technology, December 2005, Elsevier

    Professor Philip J Withers

  424. Stress relaxation of shot-peened UDIMET 720Li under solely elevated-temperature exposure and under isothermal fatigue

    Article • Metallurgical and Materials Transactions A, November 2005, Springer Science + Business Media

    Professor Philip J Withers

  425. Texture of poled tetragonal PZT detected by synchrotron X-ray diffraction and micromechanics analysis

    Article • Materials Science and Engineering A, November 2005, Elsevier

    Professor Philip J Withers

  426. Relaxation of residual stress in shot peened Udimet 720Li under high temperature isothermal fatigue

    Article • International Journal of Fatigue, October 2005, Elsevier

    Professor Philip J Withers

  427. Effects of Texture and Anisotropy on Intergranular Stress Development in Zirconium

    Article • September 2005, CrossRef Test Account

    Professor Philip J Withers

  428. Orientation dependence of martensite variants during loading of Fe–Pd shape memory alloy

    Article • Scripta Materialia, September 2005, Elsevier

    Professor Philip J Withers

  429. Energy-input-based finite-element process modeling of inertia welding

    Article • Metallurgical and Materials Transactions B, August 2005, Springer Science + Business Media

    Professor Philip J Withers

  430. High-resolution strain mapping in bulk samples using full-profile analysis of energy dispersive synchrotron X-ray diffraction data

    Article • Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms, August 2005, Elsevier

    Professor Philip J Withers

  431. Neutron Diffraction Study of Extruded Magnesium during Cyclic and Elevated Temperature Loading

    Article • Materials Science Forum, July 2005, Trans Tech Publications

    Professor Philip J Withers

  432. Full-field strain mapping by optical correlation of micrographs acquired during deformation

    Article • Journal of Microscopy, April 2005, Wiley

    Professor Philip J Withers

  433. Using pulsed neutron transmission for crystalline phase imaging and analysis

    Article • Journal of Applied Physics, April 2005, American Institute of Physics

    Professor Philip J Withers

  434. Introduction to the Characterization of Residual Stress by Neutron Diffraction

    Article • February 2005, Taylor & Francis

    Professor Philip J Withers

  435. Micromechanics of residual stress and texture development due to poling in polycrystalline ferroelectric ceramics

    Article • Journal of the Mechanics and Physics of Solids, February 2005, Elsevier

    Professor Philip J Withers

  436. The effect of thermal oxidation on polycrystalline graphite studied by X-ray tomography

    Article • Carbon, January 2005, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  437. Residual Stress Measurements Revealing Weld Bead Start and Stop Effects in Single and Multi-Pass Weld-Runs

    Article • January 2005, ASME International

    Professor Philip J Withers

  438. Imaging and strain mapping fibre by fibre in the vicinity of a fatigue crack in a Ti/SiC fibre composite

    Article • Materials Science and Technology, January 2005, Taylor & Francis

    Professor Philip J Withers

  439. High-resolution strain mapping in bulk samples using full-profile analysis of energy-dispersive synchrotron X-ray diffraction data

    Article • Journal of Applied Crystallography, November 2004, International Union of Crystallography

    Professor Philip J Withers

  440. A high energy synchrotron x-ray study of crystallographic texture and lattice strain in soft lead zirconate titanate ceramics

    Article • Journal of Applied Physics, October 2004, American Institute of Physics

    Professor Philip J Withers

  441. Physically-based constitutive modelling of residual stress development in welding of aluminium alloy 2024

    Article • Acta Materialia, October 2004, Elsevier

    Professor Philip J Withers

  442. Depth capabilities of neutron and synchrotron diffraction strain measurement instruments. I. The maximum feasible path length

    Article • Journal of Applied Crystallography, July 2004, International Union of Crystallography

    Professor Philip J Withers

  443. Depth capabilities of neutron and synchrotron diffraction strain measurement instruments. II. Practical implications

    Article • Journal of Applied Crystallography, July 2004, International Union of Crystallography

    Professor Philip J Withers

  444. High resolution X-ray tomography of short fatigue crack nucleation in austempered ductile cast iron

    Article • International Journal of Fatigue, July 2004, Elsevier

    Prof Thomas J Marrow, Professor Philip J Withers

  445. Elastic strains around cracked cold-expanded fastener holes measured using the synchrotron X-ray diffraction technique

    Article • The Journal of Strain Analysis for Engineering Design, July 2004, SAGE Publications

    Professor Philip J Withers

  446. Micromechanics of stress-induced martensitic transformation

    Article • Materials Science and Engineering A, July 2004, Elsevier

    Professor Philip J Withers

  447. Neutron diffraction study of stress-induced martensitic transformation and variant change in Fe–Pd shape memory alloy

    Article • Materials Science and Engineering A, July 2004, Elsevier

    Professor Philip J Withers

  448. Pattern decomposition and quantitative-phase analysis in pulsed neutron transmission

    Article • Physica B Condensed Matter, July 2004, Elsevier

    Professor Philip J Withers

  449. Interphase and intergranular stress generation in carbon steels

    Article • Acta Materialia, April 2004, Elsevier

    Professor Philip J Withers

  450. The effect of fibre fractures in the bridging zone of fatigue cracked Ti–6Al–4V/SiC fibre composites

    Article • Acta Materialia, April 2004, Elsevier

    Professor Philip J Withers

  451. The role of surface condition, residual stress and microstructure on pre-yield cracking in Ti44Al8Nb1B

    Article • Intermetallics, March 2004, Elsevier

    Professor Philip J Withers

  452. Synchrotron Micro-tomography and Strain Mapping on a Fatigue Cracked Ti/SiC Fibre Composite

    Article • Journal of Neutron Research, January 2004, CrossRef

    Professor Philip J Withers

  453. Residual Stresses in Linear Friction Welded IMI550

    Article • Journal of Neutron Research, January 2004, CrossRef

    Professor Philip J Withers

  454. Residual Stress Prediction for the Inertia Welding Process

    Article • Journal of Neutron Research, January 2004, CrossRef

    Professor Philip J Withers

  455. An Analysis of Lattice Strain due to Disclination Dipole Walls in Fe-Pd Martensite

    Article • Journal of Neutron Research, January 2004, CrossRef Test Account

    Professor Philip J Withers

  456. Intergranular Stress Evolution in Titanium Studied by Neutron Diffraction and Self-consistent Modelling

    Article • Journal of Neutron Research, January 2004, CrossRef Test Account

    Professor Philip J Withers

  457. Quantification of creep cavitation damage around a crack in a stainless steel pressure vessel

    Article • Acta Materialia, January 2004, Elsevier

    Professor Philip J Withers

  458. Residual Stress Driven Creep Cracking in Type 316 Stainless Steel

    Article • Journal of Neutron Research, January 2004, CrossRef Test Account

    Professor Philip J Withers

  459. Study of Residual Stresses Introduced by Laser Shock Peening in Wide Chord Fan Blades by Neutron and Synchrotron Diffraction

    Article • Journal of Neutron Research, January 2004, CrossRef Test Account

    Professor Philip J Withers

  460. The Appropriateness of Residual Stress Length Scales in Structural Integrity

    Article • Journal of Neutron Research, January 2004, CrossRef Test Account

    Professor Philip J Withers

  461. Measurement and Prediction of Residual Stresses in Aluminium Friction Stir Welds

    Article • Journal of Neutron Research, December 2003, CrossRef Test Account

    Professor Philip J Withers

  462. Near Surface Residual Stress Determination of Laser Shock Peening by Neutron Diffraction

    Article • Journal of Neutron Research, December 2003, CrossRef Test Account

    Professor Philip J Withers

  463. Neural Network Modeling for the Prediction of Texture Evolution of Hot Deformed Aluminum Alloys

    Article • Journal of Materials Engineering and Performance, December 2003, Springer Science + Business Media

    Professor Philip J Withers

  464. Neutron diffraction study of stress-induced martensitic transformation and variant change in Fe–Pd

    Article • Acta Materialia, December 2003, Elsevier

    Professor Philip J Withers

  465. SALSA: Strain Analyser for Large and Small Scale Engineering Applications

    Article • Journal of Neutron Research, December 2003, CrossRef Test Account

    Professor Philip J Withers

  466. The Engineering Body Scanner Concept

    Article • Journal of Neutron Research, December 2003, CrossRef Test Account

    Professor Philip J Withers

  467. The Measurement of Residual Stress in Railway Rails by Diffraction and other Methods *

    Article • Journal of Neutron Research, December 2003, CrossRef Test Account

    Professor Philip J Withers

  468. Special Issue

    Article • Journal of Neutron Research, December 2003, CrossRef Test Account

    Professor Philip J Withers

  469. Mechanical energy criterion for stress-induced martensitic transformation

    Article • Scripta Materialia, November 2003, Elsevier

    Professor Philip J Withers

  470. Residual stress relief in MAG welded joints of dissimilar steels

    Article • International Journal of Pressure Vessels and Piping, October 2003, Elsevier

    Professor Philip J Withers

  471. In situdetermination of stresses from time-of-flight neutron transmission spectra

    Article • Journal of Applied Crystallography, September 2003, International Union of Crystallography

    Professor Philip J Withers

  472. Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds

    Article • Acta Materialia, September 2003, Elsevier

    Professor Philip J Withers

  473. Effects of tooling on the residual stress distribution in an inertia weld

    Article • Materials Science and Engineering A, September 2003, Elsevier

    Professor Philip J Withers

  474. Neutron diffraction study of the deformation behaviour of deformation processed copper–chromium composites

    Article • Materials Science and Engineering A, May 2003, Elsevier

    Professor Philip J Withers

  475. Neutron and synchrotron measurements of residual strain in TIG welded aluminium alloy 2024

    Article • Materials Science and Engineering A, April 2003, Elsevier

    Professor Philip J Withers

  476. X-ray tomographic imaging of Ti/SiC composites

    Article • Journal of Microscopy, February 2003, Wiley

    Professor Philip J Withers

  477. Measurements of fibre bridging during fatigue crack growth in Ti/SiC fibre metal matrix composites

    Article • Acta Materialia, February 2003, Elsevier

    Professor Philip J Withers

  478. Observation and quantitative analysis of damage caused by creep in an A1 A359/SiC P composite

    Article • Materials Science and Engineering A, February 2003, Elsevier

    Professor Philip J Withers

  479. Finite element modelling of tungsten inert gas welding of aluminium alloy 2024

    Article • Science and Technology of Welding & Joining, February 2003, Taylor & Francis

    Professor Philip J Withers

  480. Article • Journal of Materials Science, January 2003, Springer Science + Business Media

    Professor Philip J Withers

  481. Computational assessment of the influence of load ratio on fatigue crack growth in fibre-reinforced metal matrix composites

    Article • International Journal of Fatigue, December 2002, Elsevier

    Professor Philip J Withers

  482. Engineering applications of Bragg-edge neutron transmission

    Article • Applied Physics A, December 2002, Springer Science + Business Media

    Professor Philip J Withers

  483. Measurement and modelling of residual stresses in a TIG weld

    Article • Applied Physics A, December 2002, Springer Science + Business Media

    Professor Philip J Withers

  484. Neutron-diffraction study of stress-induced martensitic transformation in TRIP steel

    Article • Applied Physics A, December 2002, Springer Science + Business Media

    Professor Philip J Withers

  485. The expected uncertainty of diffraction-peak location

    Article • Applied Physics A, December 2002, Springer Science + Business Media

    Professor Philip J Withers

  486. Synchrotron X-ray study of micromechanics of Ti/SiCfcomposites with fibres containing defects introduced by laser drilling

    Article • Materials Science and Technology, December 2002, Taylor & Francis

    Professor Philip J Withers

  487. A look ahead in residual stress analysis: the strain imager at the ILL

    Article • November 2002, SPIE

    Professor Philip J Withers

  488. Image Processing Issues in Digital Strain Mapping

    Article • November 2002, SPIE

    Professor Philip J Withers

  489. NEUTRON SCATTERING: Enhanced: The Case for Neutron Sources

    Article • Science, October 2002, American Association for the Advancement of Science

    Professor Philip J Withers

  490. Inertia welding nickel-based superalloy: Part II. Residual stress characterization

    Article • Metallurgical and Materials Transactions A, October 2002, Springer Science + Business Media

    Professor Philip J Withers

  491. Inertia welding nickel-based superalloy: Part I. Metallurgical characterization

    Article • Metallurgical and Materials Transactions A, October 2002, Springer Science + Business Media

    Professor Philip J Withers

  492. Interfacial shear strength of Ti/SiC fibre composites measured by synchrotron strain measurement

    Article • Composites Part A Applied Science and Manufacturing, October 2002, Elsevier

    Professor Philip J Withers

  493. Creep of a composite with a diffusional creeping matrix

    Article • Materials Science and Engineering A, September 2002, Elsevier

    Professor Philip J Withers

  494. Finite element modelling of frictional bridging during fatigue crack growth in fibre-reinforced metal matrix composites

    Article • Computational Materials Science, September 2002, Elsevier

    Professor Philip J Withers

  495. A neutron diffraction study of creep and damage occurrence in an A359/SiC composite

    Article • Materials Science and Engineering A, August 2002, Elsevier

    Professor Philip J Withers

  496. Mapping of unstressed lattice parameters using pulsed neutron transmission diffraction

    Article • Journal of Applied Crystallography, July 2002, International Union of Crystallography

    Professor Philip J Withers

  497. Fatigue crack nuclei in austempered ductile cast iron

    Article • Fatigue & Fracture of Engineering Materials & Structures, July 2002, Wiley

    Prof Thomas J Marrow, Professor Philip J Withers

  498. Micromechanical analysis of internal stress development during single-fibre fragmentation testing of Ti/SiCf

    Article • Acta Materialia, June 2002, Elsevier

    Professor Philip J Withers

  499. Multi-scale finite-element modelling of fatigue-crack growth in TiAl intermetallic matrix TiNb and Nb platelet composites

    Article • Acta Materialia, April 2002, Elsevier

    Professor Philip J Withers

  500. Strain imaging by Bragg edge neutron transmission

    Article • Nuclear Instruments and Methods in Physics Research Section A Accelerators Spectrometers Detectors and Associated Equipment, April 2002, Elsevier

    Professor Philip J Withers

  501. Changes in the misfit stresses in an Al/SiCp metal matrix composite under plastic strain

    Article • Acta Materialia, March 2002, Elsevier

    Professor Philip J Withers

  502. Measurement and prediction of residual stresses in a titanium metal matrix composite ring

    Article • Journal of Neutron Research, December 2001, CrossRef Test Account

    Professor Philip J Withers

  503. Synchrotron strain scanning on BM16 at the ESRF

    Article • Journal of Neutron Research, December 2001, CrossRef Test Account

    Professor Philip J Withers

  504. The sin2 ψ-method in pulsed neutron transmission

    Article • Journal of Neutron Research, December 2001, CrossRef Test Account

    Professor Philip J Withers

  505. The d0-distribution in Al-2024 friction stir welds

    Article • Journal of Neutron Research, December 2001, CrossRef Test Account

    Professor Philip J Withers

  506. The precision of diffraction peak location

    Article • Journal of Applied Crystallography, November 2001, International Union of Crystallography

    Professor Philip J Withers

  507. Steady-state creep of a composite

    Article • Mechanics of Materials, September 2001, Elsevier

    Professor Philip J Withers

  508. Monitoring Elastic Strain and Damage by Neutron and Synchrotron Beams

    Article • Advanced Engineering Materials, July 2001, Wiley

    Professor Philip J Withers

  509. Monitoring elastic strain and damage by neutron and synchrotron X-ray beams

    Article • Materials Science and Technology, July 2001, Taylor & Francis

    Professor Philip J Withers

  510. Bragg Edge Determination for Accurate Lattice Parameter and Elastic Strain Measurement

    Article • phys stat sol (a), June 2001, Wiley

    Professor Philip J Withers

  511. Time-of-flight neutron transmission diffraction

    Article • Journal of Applied Crystallography, May 2001, International Union of Crystallography

    Professor Philip J Withers

  512. Residual stress. Part 1 – Measurement techniques

    Article • Materials Science and Technology, April 2001, Taylor & Francis

    Professor Philip J Withers

  513. Residual stress. Part 2 – Nature and origins

    Article • Materials Science and Technology, April 2001, Taylor & Francis

    Professor Philip J Withers

  514. Neutron and Synchrotron X-ray Strain Scanning

    Article • Strain, February 2001, Wiley

    Professor Philip J Withers

  515. Synchrotron X-ray residual strain scanning of a friction stir weld

    Article • The Journal of Strain Analysis for Engineering Design, January 2001, SAGE Publications

    Professor Philip J Withers

  516. A synchrotron X-ray study of a Ti/SiCf composite during in situ straining

    Article • Acta Materialia, January 2001, Elsevier

    Professor Philip J Withers

  517. Neutron strain scanning using a radially collimated diffracted beam

    Article • Physica B Condensed Matter, November 2000, Elsevier

    Professor Philip J Withers

  518. Accelerated learning using Gaussian process models to predict static recrystallization in an Al-Mg alloy

    Article • Modelling and Simulation in Materials Science and Engineering, August 2000, Institute of Physics Publishing

    Professor Philip J Withers

  519. Model-neutron diffraction strain measurement comparisons for steady state creep of metal matrix composites

    Article • Materials Science and Engineering A, June 2000, Elsevier

    Professor Philip J Withers

  520. An investigation of the isothermal creep response of Al-based composites by neutron diffraction

    Article • Materials Science and Engineering A, May 2000, Elsevier

    Professor Philip J Withers

  521. The determination of the residual strains and stresses in a tungsten inert gas welded sheet of IN718 superalloy using neutron diffraction

    Article • The Journal of Strain Analysis for Engineering Design, May 2000, SAGE Publications

    Professor Philip J Withers

  522. Damage mechanisms of coated systems under thermomechanical fatigue

    Article • Materials Science and Technology, September 1999, Taylor & Francis

    Professor Philip J Withers

  523. Comparison of three different techniques for measuring the residual stresses in an electron beam-welded plate of WASPALOY

    Article • Metallurgical and Materials Transactions A, July 1999, Springer Science + Business Media

    Professor Philip J Withers

  524. Ultrafine grain structures formed by thermomechanical processing of spray cast Al–Li alloys

    Article • Materials Science and Technology, June 1999, Taylor & Francis

    Professor Philip J Withers

  525. Separation of measured fatigue crack stress fields in a metal matrix composite material

    Article • Acta Materialia, January 1999, Elsevier

    Professor Philip J Withers

  526. Mapping two-dimensional state of strain using synchroton X-ray diffraction

    Article • Scripta Materialia, November 1998, Elsevier

    Professor Philip J Withers

  527. A neutron diffraction study of load partitioning in continuous Ti/SiC composites

    Article • Acta Materialia, November 1998, Elsevier

    Professor Philip J Withers

  528. Microstructural development in Pt-aluminide coating on CMSX-4 superalloy during TMF

    Article • Surface and Coatings Technology, August 1998, Elsevier

    Professor Philip J Withers

  529. Prediction of damage evolution in forged aluminium metal matrix composites using a neural network approach

    Article • Journal of Materials Processing Technology, August 1998, Elsevier

    Professor Philip J Withers

  530. A recurrent neural network for modelling dynamical systems

    Article • Network Computation in Neural Systems, January 1998, Taylor & Francis

    Professor Philip J Withers

  531. Frictional behaviour of Al359/SiC/20p composite under isothermal and non-isothermal hot-working conditions as a function of surface roughness

    Article • Journal of Materials Processing Technology, December 1997, Elsevier

    Professor Philip J Withers

  532. Separation of macroscopic, elastic mismatch and thermal expansion misfit stresses in metal matrix composite quenched plates from neutron diffraction measurements

    Article • Acta Materialia, December 1997, Elsevier

    Professor Philip J Withers

  533. Micromechanics of failure of aluminide coated single crystal Ni superalloy under thermomechanical fatigue

    Article • Scripta Materialia, September 1997, Elsevier

    Professor Philip J Withers

  534. ENGIN — A new instrument for engineers

    Article • Physica B Condensed Matter, June 1997, Elsevier

    Professor Philip J Withers

  535. In situ phase strain monitoring during isothermal creep of metal matrix composites

    Article • Physica B Condensed Matter, June 1997, Elsevier

    Professor Philip J Withers

  536. Measurement of cavitation damage in isothermally crept Al/SiCp composites using small-angle neutron scattering

    Article • Physica B Condensed Matter, June 1997, Elsevier

    Professor Philip J Withers

  537. Plastic bending of a residually stressed beam

    Article • International Journal of Solids and Structures, June 1997, Elsevier

    Professor Philip J Withers

  538. The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression

    Article • Materials Science and Engineering A, December 1996, Elsevier

    Professor Philip J Withers

  539. The Effect of Clustering on Damage Formation in Particulate Reinforced MMCs Deformed in Compression

    Article • Key Engineering Materials, November 1996, Trans Tech Publications

    Professor Philip J Withers

  540. A synchrotron radiation study of transient internal strain changes during the early stages of thermal cycling in an Al / SiCw MMC

    Article • Scripta Materialia, November 1996, Elsevier

    Professor Philip J Withers

  541. A new stroboscopic neutron diffraction method for monitoring materials subjected to cyclic loads: Thermal cycling of metal matrix composites

    Article • Scripta Materialia, September 1996, Elsevier

    Professor Philip J Withers

  542. Numerical prediction of the development of particle stress in the forging of aluminium metal matrix composites

    Article • Journal of Materials Processing Technology, June 1996, Elsevier

    Professor Philip J Withers

  543. Effect of thermal residual stresses on fatigue crack opening and propagation behavior in an Al/SiC p metal matrix composite

    Article • Metallurgical and Materials Transactions A, December 1995, Springer Science + Business Media

    Professor Philip J Withers

  544. Weibull modelling of particle cracking in metal matrix composites

    Article • Acta Metallurgica et Materialia, October 1995, Elsevier

    Professor Philip J Withers

  545. The determination of the profile of macrostress and thermal mismatch stress through an Al/SiCp composite plate from the average residual strains measured in each phase

    Article • Physica B Condensed Matter, August 1995, Elsevier

    Professor Philip J Withers

  546. Neutron Strain Measurement of Internal Strain in Metal and Ceramic Matrix Composites

    Article • Key Engineering Materials, July 1995, Trans Tech Publications

    Professor Philip J Withers

  547. An examination of the mean stress contribution to the Bauschinger effect by neutron diffraction

    Article • Materials Science and Engineering A, July 1995, Elsevier

    Professor Philip J Withers

  548. The influence of temperature on microstructural damage during uniaxial compression of aluminium matrix composites

    Article • Scripta Metallurgica et Materialia, July 1995, Elsevier

    Professor Philip J Withers

  549. Examination of tensile/compressive loading asymmetries in aluminium based metal matrix composites using finite element method

    Article • Materials Science and Technology, March 1995, Taylor & Francis

    Professor Philip J Withers

  550. The deformation of discontinuously reinforced MMCs—I. The initial yielding behaviour

    Article • Acta Metallurgica et Materialia, October 1994, Elsevier

    Professor Philip J Withers

  551. The deformation of discontinuously reinforced MMCs—II. The elastic response

    Article • Acta Metallurgica et Materialia, October 1994, Elsevier

    Professor Philip J Withers

  552. Forging of ‘H’ sections from aluminium metal matrix composite bars, modelled using the finite element method

    Article • Journal of Materials Processing Technology, September 1994, Elsevier

    Professor Philip J Withers

  553. Internal stress induced debonding in a zirconia-reinforced 6061 aluminium alloy composite

    Article • Materials Science and Engineering A, November 1993, Elsevier

    Professor Philip J Withers

  554. Reinforcement phase stability during ageing of an aluminium alloy/yttria-stabilised zirconia composite

    Article • Scripta Metallurgica et Materialia, November 1993, Elsevier

    Professor Philip J Withers

  555. Considerations in the use of yield asymmetries for the analysis of internal stresses in metal matrix composites

    Article • Materials Science and Engineering A, December 1992, Elsevier

    Professor Philip J Withers

  556. The analysis of internal strains measured by neutron diffraction in Al/SiC metal matrix composites

    Article • Acta Metallurgica et Materialia, September 1992, Elsevier

    Professor Philip J Withers

  557. Iterative estimates of internal stresses in short-fibre metal matrix composites

    Article • Philosophical Magazine A, May 1992, Taylor & Francis

    Professor Philip J Withers

  558. Use of the frozen-stress photoelastic method to explore load partitioning in short-fibre composites

    Article • Materials Science and Engineering A, March 1991, Elsevier

    Professor Philip J Withers

  559. The application of the eshelby method of internal stress determination to short fibre metal matrix composites

    Article • Acta Metallurgica, November 1989, Elsevier

    Professor Philip J Withers

  560. The determination of the elastic field of an ellipsoidal inclusion in a transversely isotropic medium, and its relevance to composite materials

    Article • Philosophical Magazine A, April 1989, Taylor & Francis

    Professor Philip J Withers

  561. Comments on “The strength differential and bauschinger effects in SiC-Al composites”

    Article • Materials Science and Engineering A, February 1989, Elsevier

    Professor Philip J Withers

  562. Various TEM methods for the study of metal matrix composites

    Article • Journal of Microscopy, August 1988, Wiley

    Professor Philip J Withers