All Stories

  1. Determination of Electrospinning Parameters’ Strength in Poly(D,L)-lactide-co-glycolide Micro/Nanofiber Diameter Tailoring

    Article • Journal of Nanomaterials, January 2019, Hindawi Publishing Corporation

    Professor Shih-Jung Liu

  2. Artificial Membrane Induced by Novel Biodegradable Nanofibers in the Masquelet Procedure for Treatment of Segmental Bone Defects

    Article • Journal of Nanomaterials, October 2018, Hindawi Publishing Corporation

    Professor Shih-Jung Liu, YI HSUN YU, Che Kang Chen

  3. Promoting vascular healing using nanofibrous ticagrelor-eluting stents

    Article • International Journal of Nanomedicine, October 2018, Dove Medical Press

    Professor Shih-Jung Liu

  4. Artificial Membrane Induced by Novel Biodegradable Nanofibrous Scaffold in the Masquelet Procedure for the Treatment of Segmental Bone Defects

    Article • June 2018, MDPI AG

    Professor Shih-Jung Liu

  5. Biodegradable hybrid-structured nanofibrous membrane supported chemoprotective gene therapy enhances chemotherapy tolerance and efficacy in malignant glioma rats

    Article • Artificial Cells Nanomedicine and Biotechnology, April 2018, Taylor & Francis

    Professor Shih-Jung Liu

  6. In Vivo and In Vitro Elution of Analgesics from Multilayered Poly(D,L)-lactide-co-glycolide Nanofibers Incorporated Ureteral Stents

    Article • Journal of Nanomaterials, March 2018, Hindawi Publishing Corporation

    Professor Shih-Jung Liu

  7. Propylthiouracil-coated biodegradable polymer inhibited neointimal formation and enhanced re-endothelialization after vascular injury

    Article • International Journal of Nanomedicine, March 2018, Dove Medical Press

    Professor Shih-Jung Liu

  8. Lidocaine/ketorolac-loaded biodegradable nanofibrous anti-adhesive membranes that offer sustained pain relief for surgical wounds

    Article • International Journal of Nanomedicine, August 2017, Dove Medical Press

    Professor Shih-Jung Liu

  9. Targeted concurrent and sequential delivery of chemotherapeutic and antiangiogenic agents to the brain by using drug-loaded nanofibrous membranes

    Article • International Journal of Nanomedicine, February 2017, Dove Medical Press

    Professor Shih-Jung Liu

  10. Dual delivery of active antibactericidal agents and bone morphogenetic protein at sustainable high concentrations using biodegradable sheath-core-structured drug-eluting nanofibers

    Article • International Journal of Nanomedicine, August 2016, Dove Medical Press

    Professor Shih-Jung Liu, YI HSUN YU

  11. Enhancement of tendon–bone healing via the combination of biodegradable collagen-loaded nanofibrous membranes and a three-dimensional printed bone-anchoring bolt

    Article • International Journal of Nanomedicine, August 2016, Dove Medical Press

    Professor Shih-Jung Liu, YI HSUN YU

  12. A bio-artificial poly([D,L]-lactide-co-glycolide) drug-eluting nanofibrous periosteum for segmental long bone open fractures with significant periosteal stripping injuries

    Article • International Journal of Nanomedicine, March 2016, Dove Medical Press

    Professor Shih-Jung Liu, YI HSUN YU

  13. Promoting Diabetic Wound Therapy Using Biodegradable rhPDGF-Loaded Nanofibrous Membranes

    Article • Medicine, November 2015, Wolters Kluwer Health

    Professor Shih-Jung Liu

  14. Sustained release of bactericidal concentrations of penicillin in the pleural space via an antibiotic-eluting pigtail catheter coated with electrospun nanofibers: results from in vivo and in vitro studies

    Article • International Journal of Nanomedicine, May 2015, Dove Medical Press

    Professor Shih-Jung Liu

  15. Biodegradable drug-eluting pellets provide steady and sustainable cisplatin release in the intrapleural cavity: In vivo and in vitro studies

    Article • International Journal of Pharmaceutics, April 2015, Elsevier

    Professor Shih-Jung Liu

  16. Augmentation of diabetic wound healing and enhancement of collagen content using nanofibrous glucophage-loaded collagen/PLGA scaffold membranes

    Article • Journal of Colloid and Interface Science, February 2015, Elsevier

    Professor Shih-Jung Liu

  17. Biodegradable Vancomycin-eluting Poly[(d,l)-lactide-co-glycolide] Nanofibres for the Treatment of Postoperative Central Nervous System Infection

    Article • Scientific Reports, January 2015, Springer Science + Business Media

    Professor Shih-Jung Liu

  18. Sustained release of vancomycin from novel biodegradable nanofiber-loaded vascular prosthetic grafts: in vitro and in vivo study

    Article • International Journal of Nanomedicine, January 2015, Taylor & Francis

    Professor Shih-Jung Liu

  19. Sustained Release of Lidocaine from Solvent-Free Biodegradable Poly[(d,l)-Lactide-co-Glycolide] (PLGA): In Vitro and In Vivo Study

    Article • Materials, September 2014, MDPI AG

    Professor Shih-Jung Liu

  20. Biodegradable drug-eluting nanofiber-enveloped implants for sustained release of high bactericidal concentrations of vancomycin and ceftazidime: in vitro and in vivo studies

    Article • International Journal of Nanomedicine, September 2014, Taylor & Francis

    Professor Shih-Jung Liu

  21. Promoting endothelial recovery and reducing neointimal hyperplasia using sequential-like release of acetylsalicylic acid and paclitaxel-loaded biodegradable stents

    Article • International Journal of Nanomedicine, August 2014, Taylor & Francis

    Professor Shih-Jung Liu

  22. Effect of force-induced mechanical stress at the coronary artery bifurcation stenting: Relation to in-stent restenosis

    Article • Journal of Applied Physics, May 2014, American Institute of Physics

    Professor Shih-Jung Liu

  23. Biomaterials for dental technologies

    Article • Journal of Polymer Engineering, May 2014, De Gruyter

    Professor Shih-Jung Liu

  24. Acceleration of re-endothelialization and inhibition of neointimal formation using hybrid biodegradable nanofibrous rosuvastatin-loaded stents

    Article • Biomaterials, May 2014, Elsevier

    Professor Shih-Jung Liu

  25. Adsorption of silver ions on polypyrrole embedded electrospun nanofibrous polyethersulfone membranes

    Article • Journal of Colloid and Interface Science, April 2014, Elsevier

    Professor Shih-Jung Liu

  26. Enhancement of Diabetic Wound Repair Using Biodegradable Nanofibrous Metformin-Eluting Membranes: in Vitro and in Vivo

    Article • ACS Applied Materials & Interfaces, March 2014, American Chemical Society (ACS)

    Professor Shih-Jung Liu

  27. Finite element analysis of helical flows in human aortic arch: A novel index

    Article • Biomicrofluidics, March 2014, American Institute of Physics

    Professor Shih-Jung Liu

  28. Publisher’s Note: “Finite element analysis of helical flows in human aortic arch: A novel index” [Biomicrofluidics 8, 024111 (2014)]

    Article • Biomicrofluidics, March 2014, American Institute of Physics

    Professor Shih-Jung Liu

  29. Local sustained delivery of acetylsalicylic acid via hybrid stent with biodegradable nanofibers reduces adhesion of blood cells and promotes reendothelialization of the denuded artery

    Article • International Journal of Nanomedicine, January 2014, Dove Medical Press

    Professor Shih-Jung Liu

  30. Biodegradable poly([D,L]-lactide-co-glycolide) nanofibers for the sustainable delivery of lidocaine into the epidural space after laminectomy

    Article • Nanomedicine, January 2014, Future Medicine

    Professor Shih-Jung Liu

  31. Electrospun nanofibrous rhodanine/polymethylmethacrylate membranes for the removal of heavy metal ions

    Article • Separation and Purification Technology, October 2013, Elsevier

    Professor Shih-Jung Liu

  32. Biodegradable Drug-Eluting Poly[lactic- co -glycol acid] Nanofibers for the Sustainable Delivery of Vancomycin to Brain Tissue: In Vitro and in Vivo Studies

    Article • ACS Chemical Neuroscience, September 2013, American Chemical Society (ACS)

    Professor Shih-Jung Liu

  33. Biodegradable Cisplatin-Eluting Tracheal Stent for Malignant Airway Obstruction

    Article • CHEST Journal, July 2013, Elsevier

    Professor Shih-Jung Liu

  34. Nanofeatured anti-reflective films manufactured using hot roller imprinting and self-assembly nanosphere lithography

    Article • Optics & Laser Technology, June 2013, Elsevier

    Professor Shih-Jung Liu

  35. Sustainable release of carmustine from biodegradable poly[(d,l)-lactide-co-glycolide] nanofibrous membranes in the cerebral cavity:in vitroandin vivostudies

    Article • Expert Opinion on Drug Delivery, January 2013, Informa Healthcare

    Professor Shih-Jung Liu

  36. Fast Fabrication of Microfeatured Plastic Diffusers Using IR-Assisted Injection Molding

    Article • Materials and Manufacturing Processes, December 2012, Taylor & Francis

    Professor Shih-Jung Liu

  37. Preclinical Experiments on the Release Behavior of Biodegradable Nanofibrous Multipharmaceutical Membranes in a Model of Four-Wall Intrabony Defect

    Article • Antimicrobial Agents and Chemotherapy, September 2012, ASM Journals

    Professor Shih-Jung Liu

  38. Biodegradable balloon-expandable self-locking polycaprolactone stents as buckling explants for the treatment of retinal detachment: Anin vitroandin vivostudy

    Article • Journal of Biomedical Materials Research Part A, July 2012, Wiley

    Professor Shih-Jung Liu

  39. Sustainable release of vancomycin, gentamicin and lidocaine from novel electrospun sandwich-structured PLGA/collagen nanofibrous membranes

    Article • International Journal of Pharmaceutics, July 2012, Elsevier

    Professor Shih-Jung Liu

  40. The influence of γ irradiation and ethylene oxide treatment on the release characteristics of biodegradable poly(lactide-co-glycolide) composites

    Article • Polymer Degradation and Stability, May 2012, Elsevier

    Professor Shih-Jung Liu

  41. Compression molding of biodegradable drug-eluting implants for sustained release of metronidazole and doxycycline

    Article • Journal of Applied Polymer Science, April 2012, Wiley

    Professor Shih-Jung Liu

  42. The Development of Novel Biodegradable Bifurcation Stents for the Sustainable Release of Anti-Proliferative Sirolimus

    Article • Annals of Biomedical Engineering, March 2012, Springer Science + Business Media

    Professor Shih-Jung Liu

  43. Continuous infrared-assisted double-sided roll-to-roll embossing of flexible polymer substrates

    Article • Polymer Engineering & Science, February 2012, Wiley

    Professor Shih-Jung Liu

  44. Fast fabrication of nano-structured anti-reflection layers for enhancement of solar cells performance using plasma sputtering and infrared assisted roller embossing techniques

    Article • Optics Express, February 2012, Optical Society of America (OSA)

    Professor Shih-Jung Liu

  45. Novel biodegradable sandwich-structured nanofibrous drug-eluting membranes for repair of infected wounds: an in vitro and in vivo study

    Article • International Journal of Nanomedicine, February 2012, Taylor & Francis

    Professor Shih-Jung Liu

  46. Ultralow Dielectric Property of Electrospun Polylactide–Polyglycolide Nanofibrous Membranes

    Article • Japanese Journal of Applied Physics, October 2011, Japan Society of Applied Physics

    Professor Shih-Jung Liu

  47. Ultralow Dielectric Property of Electrospun Polylactide–Polyglycolide Nanofibrous Membranes

    Article • Japanese Journal of Applied Physics, October 2011, Japan Society of Applied Physics

    Professor Shih-Jung Liu

  48. In Vitro and In Vivo Investigation of Drug-Eluting Implants for the Treatment of Periodontal Disease

    Article • AAPS PharmSciTech, August 2011, American Association of Pharmaceutical Scientists (AAPS)

    Professor Shih-Jung Liu

  49. Novel Biodegradable Polycaprolactone Occlusion Device Combining Nanofibrous PLGA/Collagen Membrane for Closure of Atrial Septal Defect (ASD)

    Article • Annals of Biomedical Engineering, July 2011, Springer Science + Business Media

    Professor Shih-Jung Liu

  50. In-vitro release of anti-proliferative paclitaxel from novel balloon-expandable polycaprolactone stents

    Article • Materials Science and Engineering C, July 2011, Elsevier

    Professor Shih-Jung Liu

  51. In Vitro and In Vivo Analysis of a Biodegradable Poly(lactide-co-glycolide) Copolymer Capsule and Collagen Composite System for Antibiotics and Bone Cells Delivery

    Article • Journal of Trauma and Acute Care Surgery, June 2011, Wolters Kluwer Health

    Professor Shih-Jung Liu

  52. The Use of Fluorescence-Labeled Mesenchymal Stem Cells in Poly(lactide-co-glycolide)/Hydroxyapatite/Collagen Hybrid Graft as a Bone Substitute for Posterolateral Spinal Fusion

    Article • Journal of Trauma and Acute Care Surgery, June 2011, Wolters Kluwer Health

    Professor Shih-Jung Liu

  53. Experimental and numerical analysis of the temperature distribution of injection molded products using protruding microprobes

    Article • Review of Scientific Instruments, May 2011, American Institute of Physics

    Professor Shih-Jung Liu

  54. Experimental absorbable stent permits airway remodeling

    Article • Journal of Thoracic and Cardiovascular Surgery, February 2011, Elsevier

    Professor Shih-Jung Liu

  55. The effect of non-flat interfaces before weld on the Joint strengths of hot plate Welded parts

    Article • August 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Shih-Jung Liu

  56. Rapid fabrication of surface-relief plastic diffusers by ultrasonic embossing

    Article • Optics & Laser Technology, July 2010, Elsevier

    Professor Shih-Jung Liu

  57. Morphological development in water assisted injection molded polyethylene/polyamide-6 blends

    Article • Polymers for Advanced Technologies, June 2010, Wiley

    Professor Shih-Jung Liu

  58. Electrospun PLGA/collagen nanofibrous membrane as early-stage wound dressing

    Article • Journal of Membrane Science, June 2010, Elsevier

    Professor Shih-Jung Liu

  59. Fabrication of Balloon-Expandable Self-Lock Drug-Eluting Polycaprolactone Stents Using Micro-Injection Molding and Spray Coating Techniques

    Article • Annals of Biomedical Engineering, May 2010, Springer Science + Business Media

    Professor Shih-Jung Liu

  60. Rotational molding of polycarbonate reinforced polyethylene composites: Processing parameters and properties

    Article • Polymer Engineering & Science, March 2010, Wiley

    Professor Shih-Jung Liu

  61. Sustained release of ganciclovir and foscarnet from biodegradable scleral plugs for the treatment of cytomegalovirus retinitis

    Article • Biomaterials, March 2010, Elsevier

    Professor Shih-Jung Liu

  62. Morphology of Fluid Assisted Injection Molded Polycarbonate/Polyethylene Blends

    Article • Macromolecular Materials and Engineering, February 2010, Wiley

    Professor Shih-Jung Liu

  63. Solvent-free biodegradable scleral plugs providing sustained release of vancomycin, amikacin, and dexamethasone-Anin vivostudy

    Article • Journal of Biomedical Materials Research Part A, January 2010, Wiley

    Professor Shih-Jung Liu

  64. The influence of processing parameters on fingering formation in fluid-assisted injection-molded disks

    Article • Polymer Engineering & Science, November 2009, Wiley

    Professor Shih-Jung Liu

  65. Manufacture of dual-side surface-relief diffusers with various cross angles using ultrasonic embossing technique

    Article • Optics Express, September 2009, Optical Society of America (OSA)

    Professor Shih-Jung Liu

  66. In-situ temperature measurements in the depths of injection molded parts

    Article • Measurement, June 2009, Elsevier

    Professor Shih-Jung Liu

  67. Injection Molding

    Article • May 2009, Carl Hanser Verlag

    Professor Shih-Jung Liu

  68. Gas Assisted Injection Molding

    Article • May 2009, Carl Hanser Verlag

    Professor Shih-Jung Liu

  69. Injection Molding

    Article • May 2009, Carl Hanser Verlag

    Professor Shih-Jung Liu

  70. Subject Index

    Article • May 2009, Carl Hanser Verlag

    Professor Shih-Jung Liu

  71. Using differential mold temperatures to improve the residual wall thickness uniformity around curved sections of fluid assisted injection molded tubes

    Article • International Communications in Heat and Mass Transfer, May 2009, Elsevier

    Professor Shih-Jung Liu

  72. In vitro elution of vancomycin/amikacin/steroid from solvent-free biodegradable scleral plugs

    Article • International Journal of Pharmaceutics, March 2009, Elsevier

    Professor Shih-Jung Liu

  73. Guest editorial: polymers and polymer-based processes

    Article • Asia-Pacific Journal of Chemical Engineering, March 2009, Wiley

    Professor Shih-Jung Liu

  74. Manufacture of solvent-free polylactic-glycolic acid (PLGA) scaffolds for tissue engineering

    Article • Asia-Pacific Journal of Chemical Engineering, March 2009, Wiley

    Professor Shih-Jung Liu

  75. Novel three-dimensional in-cavity transient temperature measurements in injection molding and fluid-assisted injection molding

    Article • Polymer Testing, February 2009, Elsevier

    Professor Shih-Jung Liu

  76. Enhancement of posterolateral lumbar spine fusion using low-dose rhBMP-2 and cultured marrow stromal cells

    Article • Journal of Orthopaedic Research®, October 2008, Wiley

    Professor Shih-Jung Liu

  77. Best practice for benchmarking injection moulding simulation

    Article • Plastics Rubber and Composites Macromolecular Engineering, May 2008, Taylor & Francis

    Professor Shih-Jung Liu

  78. Effect of enhancing fins on the heating/cooling efficiency of rotational molding and the molded product qualities

    Article • Polymer Testing, April 2008, Elsevier

    Professor Shih-Jung Liu

  79. Manufacture of Thermoplastic Elastomer Tubes by Water Assisted Injection Molding Technology

    Article • Rubber Chemistry and Technology, March 2008, Rubber Division, ACS

    Professor Shih-Jung Liu

  80. Experimental investigation and numerical simulation of the heating/cooling process in rotational molding enhanced with fins

    Article • Journal of Applied Polymer Science, January 2008, Wiley

    Professor Shih-Jung Liu

  81. Dynamic visualization of cavity-filling process in fluid-assisted injection molding-gas versus water

    Article • Polymer Testing, April 2007, Elsevier

    Professor Shih-Jung Liu

  82. Novel solvent-free fabrication of biodegradable poly-lactic-glycolic acid (PLGA) capsules for antibiotics and rhBMP-2 delivery

    Article • International Journal of Pharmaceutics, February 2007, Elsevier

    Professor Shih-Jung Liu

  83. A novel soft-mold roller embossing method for the rapid fabrication of micro-blocks onto glass substrates

    Article • Journal of Micromechanics and Microengineering, December 2006, Institute of Physics Publishing

    Professor Shih-Jung Liu

  84. Factors affecting the formation of fingering in water-assisted injection-molded thermoplastics

    Article • Advances in Polymer Technology, January 2006, Wiley

    Professor Shih-Jung Liu

  85. Development of a biodegradable alginate carrier system for antibiotics and bone cells

    Article • Journal of Orthopaedic Research®, January 2006, Wiley

    Professor Shih-Jung Liu

  86. Study of ‘fingering’ in water assisted injection molded composites

    Article • Composites Part A Applied Science and Manufacturing, November 2005, Elsevier

    Professor Shih-Jung Liu

  87. A novel solvent-free method for the manufacture of biodegradable antibiotic-capsules for a long-term drug release using compression sintering and ultrasonic welding techniques

    Article • Biomaterials, August 2005, Elsevier

    Professor Shih-Jung Liu

  88. Hot embossing precise structure onto plastic plates by ultrasonic vibration

    Article • Polymer Engineering & Science, May 2005, Wiley

    Professor Shih-Jung Liu

  89. Derivation of optimal processing parameters of polypropylene foam thermoforming by an artificial neural network

    Article • Polymer Engineering & Science, January 2005, Wiley

    Professor Shih-Jung Liu

  90. The release of cefazolin and gentamicin from biodegradable PLA/PGA beads

    Article • International Journal of Pharmaceutics, April 2004, Elsevier

    Professor Shih-Jung Liu

  91. The manufacturing of thermoplastic composite parts by water-assisted injection-molding technology

    Article • Composites Part A Applied Science and Manufacturing, February 2004, Elsevier

    Professor Shih-Jung Liu

  92. Water-assisted injection molding of thermoplastic materials: Effects of processing parameters

    Article • Polymer Engineering & Science, November 2003, Wiley

    Professor Shih-Jung Liu

  93. The Influence of Processing Parameters on Thin-Wall Gas Assisted Injection Molding of Thermoplastic Materials

    Article • Journal of Reinforced Plastics and Composites, June 2003, SAGE Publications

    Professor Shih-Jung Liu

  94. Enveloping the tendon graft with periosteum to enhance tendon-bone healing in a bone tunnel: A biomechanical and histologic study in rabbits

    Article • Arthroscopy The Journal of Arthroscopic and Related Surgery, March 2003, Elsevier

    Professor Shih-Jung Liu

  95. Parameters affecting the full-shot molding of gas-assisted injection-molded parts

    Article • Advances in Polymer Technology, January 2003, Wiley

    Professor Shih-Jung Liu

  96. In vivo study of hot compressing molded 50:50 poly (DL-lactide-co-glycolide) antibiotic beads in rabbits

    Article • Journal of Orthopaedic Research®, July 2002, Wiley

    Professor Shih-Jung Liu

  97. Surface Roughness at the Melt/Gas Transition Sites of Gas-Assist Injection Molded Thermoplastic Composites

    Article • Journal of Reinforced Plastics and Composites, February 2002, SAGE Publications

    Professor Shih-Jung Liu

  98. Variations in surface gloss on parts made by gas assisted injection moulding

    Article • Plastics Rubber and Composites Macromolecular Engineering, January 2002, Taylor & Francis

    Professor Shih-Jung Liu

  99. Experimental study of weldline caused by flow lead effect in gas assisted injection moulded parts

    Article • Plastics Rubber and Composites Macromolecular Engineering, January 2002, Taylor & Francis

    Professor Shih-Jung Liu

  100. In vivo release of vancomycin from biodegradable beads

    Article • Journal of Biomedical Materials Research, January 2002, Wiley

    Professor Shih-Jung Liu

  101. STRESS ANALYSIS OF THE VASCULARIZED FIBULAR BONE TRANSPLANTATION IN LARGE TIBIA DEFECT RECONSTRUCTION: A FINITE ELEMENT STUDY

    Article • Biomedical Engineering Applications Basis and Communications, October 2001, National Taiwan University

    Professor Shih-Jung Liu

  102. Factors affecting the joint strength of ultrasonically welded polypropylene composites

    Article • Polymer Composites, February 2001, Wiley

    Professor Shih-Jung Liu

  103. Minimizing the sinkmarks in injection-molded thermoplastics

    Article • Advances in Polymer Technology, January 2001, Wiley

    Professor Shih-Jung Liu

  104. Rotational molding of two-layered polyethylene foams

    Article • Advances in Polymer Technology, January 2001, Wiley

    Professor Shih-Jung Liu

  105. The Occurrence of Fiber Exposure in Gas Assist Injection Molded Nylon Composites

    Article • January 2001, Elsevier

    Professor Shih-Jung Liu

  106. Application of the Taguchi Method to Optimize the Surface Quality of Gas Assist Injection Molded Composites

    Article • Journal of Reinforced Plastics and Composites, November 2000, SAGE Publications

    Professor Shih-Jung Liu

  107. Warpage in Rotationally Molded Parts

    Article • Journal of Reinforced Plastics and Composites, August 2000, SAGE Publications

    Professor Shih-Jung Liu

  108. The occurrence of surface roughness in gas assist injection molded nylon composites

    Article • Polymer Composites, April 2000, Wiley

    Professor Shih-Jung Liu

  109. Optimizing the impact strength of rotationally molded parts

    Article • Polymer Engineering & Science, February 2000, Wiley

    Professor Shih-Jung Liu

  110. Effects of the shape of the energy director on far-field ultrasonic welding of thermoplastics

    Article • Polymer Engineering & Science, January 2000, Wiley

    Professor Shih-Jung Liu

  111. Application of the Taguchi Method to Optimize the Surface Quality of Gas Assist Injection Molded Composites

    Article • Journal of Reinforced Plastics and Composites, January 2000, SAGE Publications

    Professor Shih-Jung Liu

  112. Hyperbaric Oxygen Therapy Mitigates the Adverse Effect of Cigarette Smoking on the Bone Healing of Tibial Lengthening: An Experimental Study on Rabbits

    Article • October 1999, Wolters Kluwer Health

    Professor Shih-Jung Liu

  113. An experimental study of foamed polyethylene in rotational molding

    Article • Polymer Engineering & Science, September 1999, Wiley

    Professor Shih-Jung Liu

  114. Development of a Biodegradable Antibiotic Delivery System

    Article • Clinical Orthopaedics and Related Research, May 1999, Wolters Kluwer Health

    Professor Shih-Jung Liu

  115. Factors affecting the warpage of rotationally molded parts

    Article • Advances in Polymer Technology, January 1999, Wiley

    Professor Shih-Jung Liu

  116. Factors affecting the warpage of rotationally molded parts

    Article • Advances in Polymer Technology, January 1999, Wiley

    Professor Shih-Jung Liu

  117. Optimizing the joint strength of ultrasonically welded thermoplastics

    Article • Advances in Polymer Technology, January 1999, Wiley

    Professor Shih-Jung Liu

  118. Optimizing the joint strength of ultrasonically welded thermoplastics

    Article • Advances in Polymer Technology, January 1999, Wiley

    Professor Shih-Jung Liu

  119. Bone Healing of Tibial Lengthening Is Delayed by Cigarette Smoking

    Article • January 1999, Wolters Kluwer Health

    Professor Shih-Jung Liu

  120. In vitro elution of vancomycin from biodegradable beads

    Article • Journal of Biomedical Materials Research, January 1999, Wiley

    Professor Shih-Jung Liu

  121. Bone Healing of Tibial Lengthening Is Enhanced by Hyperbaric Oxygen Therapy

    Article • April 1998, Wolters Kluwer Health

    Professor Shih-Jung Liu

  122. Modeling and simulation of the vacuum forming of wood fiber-filled thermoplastic composites

    Article • Polymer Composites, December 1997, Wiley

    Professor Shih-Jung Liu

  123. A new viscoelastic phase-transformation model to simulate the injection-molding residual stress

    Article • Journal of Applied Polymer Science, December 1996, Wiley

    Professor Shih-Jung Liu

  124. Modeling and simulation of thermally induced stress and warpage in injection molded thermoplastics

    Article • Polymer Engineering & Science, March 1996, Wiley

    Professor Shih-Jung Liu