All Stories

  1. Morphological Control of Cells on 3-Dimensional Multi-Layer Nanotopographic Structures
  2. Controlled Fabrication of Multicompartmental Polymeric Microparticles by Sequential Micromolding via Surface-Tension-Induced Droplet Formation
  3. Microfluidic static droplet array for analyzing microbial communication on a population gradient
  4. Toward instrument-free digital measurements: a three-dimensional microfluidic device fabricated in a single sheet of paper by double-sided printing and lamination
  5. Three-dimensional clustering of Janus cylinders by convex curvature and hydrophobic interactions
  6. A programmable microfluidic static droplet array for droplet generation, transportation, fusion, storage, and retrieval
  7. 미세 채널에서 칼슘이온 물질전달을 이용한 단분산성 알지네이트 하이드로젤 입자의 실시간 젤화
  8. 산세기 조절을 통해 모양 변형이 가능한 야누스 입자의 제조
  9. Optimization of microwell-based cell docking in microvalve integrated microfluidic device
  10. Analysis of Morphological Change of Polar Bacterium using Microfluidic Device with Temperature Gradient
  11. 액적 기반의 미세유체 시스템을 이용한 초고속 대용량 스크리닝
  12. A Rapid One-Step Fabrication of Patternable Superhydrophobic Surfaces Driven by Marangoni Instability
  13. Effect of temperature on biofilm formation by Antarctic marine bacteria in a microfluidic device
  14. 미세유체의 효율적인 액적 합류를 위한 정체현상 조절
  15. Microfluidic Design of Complex Emulsions
  16. Fabrication of Polymeric Microcapsules in a Microchannel using Formation of Double Emulsion
  17. Pump-less static microfluidic device for analysis of chemotaxis of Pseudomonas aeruginosa using wetting and capillary action
  18. Diagnostic Paper Chip for Reliable Quantitative Detection of Albumin using Retention Factor
  19. Controllable Preparation of Monodisperse Microspheres Using Geometrically Mediated Droplet Formation in a Single Mold
  20. One Step Formation of Controllable Complex Emulsions: From Functional Particles to Simultaneous Encapsulation of Hydrophilic and Hydrophobic Agents into Desired Position
  21. Reliable Synthesis of Monodisperse Microparticles: Prevention of Oxygen Diffusion and Organic Solvents Using Conformal Polymeric Coating onto Poly(dimethylsiloxane) Micromold
  22. Generation of uniform agarose microwells for cell patterning by micromolding in capillaries
  23. Double Hydrophilic Janus Cylinders at an Air–Water Interface
  24. A continuous tilting of micromolds for fabricating polymeric microstructures in microinjection
  25. Geometrically and chemically anisotropic particles at an oil–water interface
  26. Paper-Based Analytical Device for Quantitative Urinalysis
  27. 기능성 콜로이드 입자의 제조기술 및 이의 응용
  28. Micromolding Technique for Controllable Anisotropic Polymeric Particles with Convex Roof
  29. Microspheres: Synthesis of Monodispersed Microspheres from Laplace Pressure Induced Droplets in Micromolds (Adv. Mater. 37/2012)
  30. The inhibitory effect of phloretin on the formation of Escherichia coli O157:H7 biofilm in a microfluidic system
  31. Recent Emulsion Technology in Cosmetics
  32. 미세유로 내에서 Pseudomonas aeruginosa의 유영 운동 분석
  33. 미세채널에서 수력학적 조절을 통한 단분산성 다중 액적 생성
  34. Synthesis of Bioactive Microcapsules Using a Microfluidic Device
  35. Label-Free Electrochemical Diagnosis of Viral Antigens with Genetically Engineered Fusion Protein
  36. Synthesis of Monodispersed Microspheres from Laplace Pressure Induced Droplets in Micromolds
  37. Microfluidic synthesis of anisotropic particles from Janus drop by in situ photopolymerization
  38. Palladium Nanocatalysts Immobilized on Functionalized Resin for the Direct Synthesis of Hydrogen Peroxide from Hydrogen and Oxygen
  39. In situ Microfluidic Method for the Generation of Monodisperse Double Emulsions
  40. Regioselective surface modification of pdms microfluidic device for the generation of monodisperse double emulsions
  41. Profiling surface glycans on live cells and tissues using quantum dot-lectin nanoconjugates
  42. Effect of shear stress on the formation of bacterial biofilm in a microfluidic channel
  43. Microfluidic fabrication of complex-shaped microfibers by liquid template-aided multiphase microflow
  44. Microfluidic monitoring of Pseudomonas aeruginosa chemotaxis under the continuous chemical gradient
  45. Surface-Tension-Induced Synthesis of Complex Particles Using Confined Polymeric Fluids
  46. Surface-Tension-Induced Synthesis of Complex Particles Using Confined Polymeric Fluids
  47. Fabrication of selective anti-biofouling surface for micro/nanopatterning of proteins
  48. Fabrication of Uniform DNA-Conjugated Hydrogel Microparticles via Replica Molding for Facile Nucleic Acid Hybridization Assays
  49. Preparation of bacteria microarray using selective patterning of polyelectrolyte multilayer and poly(ethylene glycol)-poly(lactide) diblock copolymer
  50. In situ monitoring of antibiotic susceptibility of bacterial biofilms in a microfluidic device
  51. Solvent-Resistant PDMS Microfluidic Devices with Hybrid Inorganic/Organic Polymer Coatings
  52. Generation of Monodisperse Inorganic-Organic Janus Microspheres in a Microfluidic Device
  53. Nanopatterning of proteins using composite nanomold and self-assembled polyelectrolyte multilayers
  54. In situ microfluidic synthesis of monodisperse PEG microspheres
  55. Facile Preparation of Biopatternable Surface for Selective Immobilization from Bacteria to Mammalian Cells
  56. Microfluidic synthesis of a cell adhesive Janus polyurethane microfiber
  57. Simple fabrication of functionalized surface with polyethylene glycol microstructure and glycidyl methacrylate moiety for the selective immobilization of proteins and cells
  58. Selective Patterning of Quantum Dots on Functionalized Surface Using Polyelectrolyte Transfer
  59. Preparation of orthogonally functionalized surface using micromolding in capillaries technique for the control of cellular adhesion
  60. Protein patterning on self-assembled polyelectrolyte thin films
  61. Novel one-pot route to monodisperse thermosensitive hollow microcapsules in a microfluidic system
  62. The Effect of Microfluidic Geometry for in situ Generating Monodispersed Hydrogels
  63. Generation of monodisperse alginate microbeads and in situ encapsulation of cell in microfluidic device
  64. Patterning of proteins and cells on functionalized surfaces prepared by polyelectrolyte multilayers and micromolding in capillaries