All Stories

  1. High-performance polyimide nanofibers reinforced polyimide nanocomposite films fabricated by co-electrospinning followed by hot-pressing
  2. Hybrid multi-scale epoxy composites containing conventional glass microfibers and electrospun glass nanofibers with improved mechanical properties
  3. Reduction of crack formation in TiO2 mesoporous films prepared from binder-free nanoparticle pastes via incorporation of electrospun SiO2 or TiO2 nanofibers for dye-sensitized solar cells
  4. Effects of chemical composition and post-spinning stretching process on the morphological, structural, and thermo-chemical properties of electrospun polyacrylonitrile copolymer precursor nanofibers
  5. Fabrication and characterization of electrospun SiO2 nanofibers absorbed with fatty acid eutectics for thermal energy storage/retrieval
  6. Electrospun Regenerated Cellulose Nanofibrous Membranes Surface-Grafted with Polymer Chains/Brushes via the Atom Transfer Radical Polymerization Method for Catalase Immobilization
  7. CVD grown CNTs within iron modified and graphitized carbon aerogel as durable oxygen reduction catalysts in acidic medium
  8. Flexible, Transferable, and Thermal-Durable Dye-Sensitized Solar Cell Photoanode Consisting of TiO 2 Nanoparticles and Electrospun TiO 2 /SiO 2 Nanofibers
  9. Immobilization of Catalase on Electrospun PVA/PA6–Cu(II) Nanofibrous Membrane for the Development of Efficient and Reusable Enzyme Membrane Reactor
  10. Lignin-derived electrospun carbon nanofiber mats with supercritically deposited Ag nanoparticles for oxygen reduction reaction in alkaline fuel cells
  11. Multiscale Glass Fiber-Reinforced Composite Developed from Epoxy Resin Containing Electrospun Glass Nanofibers
  12. Mechanically flexible hybrid mat consisting of TiO2 and SiO2 nanofibers electrospun via dual spinnerets for photo-detector
  13. Electrospun ZnO/SiO2 hybrid nanofibrous mat for flexible ultraviolet sensor
  14. Nano-epoxy resins containing electrospun carbon nanofibers and the resulting hybrid multi-scale composites
  15. Free-standing and mechanically flexible mats consisting of electrospun carbon nanofibers made from a natural product of alkali lignin as binder-free electrodes for high-performance supercapacitors
  16. The Improvement of Thermal Stability and Conductivity via Incorporation of Carbon Nanofibers into Electrospun Ultrafine Composite Fibers of Lauric Acid/Polyamide 6 Phase Change Materials for Thermal Energy Storage
  17. Dye-sensitized solar cells based on spray-coated carbon nanofiber/TiO2 nanoparticle composite counter electrodes
  18. Electrophoretic deposition of different carbon nanoscale reinforcements on carbon fiber fabrics and mechanical properties of the resulting hybrid multi-scale epoxy composites
  19. Manipulating the Collective Surface Plasmon Resonances of Aligned Gold Nanorods in Electrospun Composite Nanofibers
  20. A review: carbon nanofibers from electrospun polyacrylonitrile and their applications
  21. Fabrication and evaluation of dye-sensitized solar cells with photoanodes based on electrospun TiO2 nanotubes
  22. Continuous bundles of aligned electrospun polyacrylonitrile copolymer nanofibers prepared via the flowing water bath and their morphological, structural, and componential variations during the opposite-directional diffusion process
  23. Electrospun anatase-phase TiO2 nanofibers with different morphological structures and specific surface areas
  24. Electrospun nanofibrous mats absorbed with fatty acid eutectics as an innovative type of form-stable phase change materials for storage and retrieval of thermal energy
  25. Electron Transport and Recombination in Photoanode of Electrospun TiO 2 Nanotubes for Dye-Sensitized Solar Cells
  26. Electrospun TiC/C nano-felt surface-decorated with Pt nanoparticles as highly efficient and cost-effective counter electrode for dye-sensitized solar cells
  27. SERS-active silver nanoparticles on electrospun nanofibers facilitated via oxygen plasma etching
  28. Effects of humidity on the ultraviolet nanosensors of aligned electrospun ZnO nanofibers
  29. Luminescence studies of electrospun core–sheath fibers with the core component being a rubber nanocomposite containing a Eu(iii) complex
  30. Mechanically resilient electrospun TiC nanofibrous mats surface-decorated with Pt nanoparticles for oxygen reduction reaction with enhanced electrocatalytic activities
  31. Nanodroplet Formations in Electrospun Fibers of Immiscible Polymer Blends and Their Effects on Fractionated Crystallization
  32. Fabrication and mechanical properties of hybrid multi-scale epoxy composites reinforced with conventional carbon fiber fabrics surface-attached with electrospun carbon nanofiber mats
  33. Preparation, morphology and thermal properties of electrospun fatty acid eutectics/polyethylene terephthalate form-stable phase change ultrafine composite fibers for thermal energy storage
  34. Effect of FeCl3 on the morphology, wetting behavior, and stabilization/carbonization of polyacrylonitrile nanofibers prepared by electrospinning
  35. Electrospun Nanofibrous Membranes Surface-Decorated with Silver Nanoparticles as Flexible and Active/Sensitive Substrates for Surface-Enhanced Raman Scattering
  36. Fabrication and evaluation of Bis-GMA/TEGDMA dental resins/composites containing halloysite nanotubes
  37. Electrospun composite nanofibers of polybutadiene rubber containing uniformly distributed Ag nanoparticles
  38. Evolution of nanodroplets and fractionated crystallization in thermally annealed electrospun blend fibers of poly(vinylidene fluoride) and polysulfone
  39. Effects of carbon nanotubes on morphological structure, thermal and flammability properties of electrospun composite fibers consisting of lauric acid and polyamide 6 as thermal energy storage materials
  40. Electrospun ultrafine composite fibers consisting of lauric acid and polyamide 6 as form-stable phase change materials for storage and retrieval of solar thermal energy
  41. Fabrication and evaluation of polyamide 6 composites with electrospun polyimide nanofibers as skeletal framework
  42. Polarity-induced ferroelectric crystalline phase in electrospun fibers of poly(vinylidene fluoride)/polyacrylonitrile blends
  43. Hybrid multi-scale composites developed from glass microfiber fabrics and nano-epoxy resins containing electrospun glass nanofibers
  44. Structure and thermo-chemical properties of continuous bundles of aligned and stretched electrospun polyacrylonitrile precursor nanofibers collected in a flowing water bath
  45. High power supercapacitor electrodes based on flexible TiC-CDC nano-felts
  46. Electrospun carbon nano-felt surface-attached with Pd nanoparticles for hydrogen sensing application
  47. Electrospun carbon nanofibers surface-grafted with vapor-grown carbon nanotubes as hierarchical electrodes for supercapacitors
  48. Electrospun carbon nanofibrous mats surface-decorated with Pd nanoparticles via the supercritical CO2 method for sensing of H2
  49. Upconversion polymeric nanofibers containing lanthanide-doped nanoparticles via electrospinning
  50. Enhanced performance in dye-sensitized solar cells via carbon nanofibers–platinum composite counter electrodes
  51. Editors & Editorial Board
  52. Metal Oxides as Catalyst Promoters for Methanol Oxidation
  53. Mathematical model using non-uniform flow distribution for dynamic protein breakthrough with membrane adsorption media
  54. Surface-functionalized electrospun carbon nanofiber mats as an innovative type of protein adsorption/purification medium with high capacity and high throughput
  55. Nanodroplet formation and exclusive homogenously nucleated crystallization in confined electrospun immiscible polymer blend fibers of polystyrene and poly(ethylene oxide)
  56. Parameter dependence of conic angle of nanofibres during electrospinning
  57. Preparation and evaluation of nano-epoxy composite resins containing electrospun glass nanofibers
  58. Formation and morphological stability of polybutadiene rubber fibers prepared through combination of electrospinning and in-situ photo-crosslinking
  59. Tissue engineering of annulus fibrosus using electrospun fibrous scaffolds with aligned polycaprolactone fibers
  60. Hybrid multi-scale epoxy composite made of conventional carbon fiber fabrics with interlaminar regions containing electrospun carbon nanofiber mats
  61. Electrical properties of electrospun carbon nanofibers
  62. Effects of nano-SiO2 on morphology, thermal energy storage, thermal stability, and combustion properties of electrospun lauric acid/PET ultrafine composite fibers as form-stable phase change materials
  63. Process and economic evaluation for monoclonal antibody purification using a membrane-only process
  64. Understanding polymorphism formation in electrospun fibers of immiscible Poly(vinylidene fluoride) blends
  65. STORAGE MATERIALS: Flexible Nano-felts of Carbide-Derived Carbon with Ultra-high Power Handling Capability (Adv. Energy Mater. 3/2011)
  66. Flexible Nano-felts of Carbide-Derived Carbon with Ultra-high Power Handling Capability
  67. Antimicrobial nano-fibrous membranes developed from electrospun polyacrylonitrile nanofibers
  68. Transient photocurrent and photovoltage studies on charge transport in dye sensitized solar cells made from the composites of TiO2 nanofibers and nanoparticles
  69. Gold–silver bimetallic porous nanowires for surface-enhanced Raman scattering
  70. Photoluminescence anisotropy of uni-axially aligned electrospun conjugated polymer nanofibers of MEH-PPV and P3HT
  71. Investigation of post-spinning stretching process on morphological, structural, and mechanical properties of electrospun polyacrylonitrile copolymer nanofibers
  72. Electrospun Carbon Nanofibers as Low-Cost Counter Electrode for Dye-Sensitized Solar Cells
  73. Mechanical properties and reinforcement mechanisms of hydrogenated acrylonitrile butadiene rubber composites containing fibrillar silicate nanofibers and short aramid microfibers
  74. Electrospun Nanofibrous Polycaprolactone Scaffolds for Tissue Engineering of Annulus Fibrosus
  75. Silver nanoparticles on amidoxime fibers for photo-catalytic degradation of organic dyes in waste water
  76. A surface treatment technique of electrochemical oxidation to simultaneously improve the interfacial bonding strength and the tensile strength of PAN-based carbon fibers
  77. Hierarchical electrospun SiO2 nanofibers containing SiO2 nanoparticles with controllable surface-roughness and/or porosity
  78. Graphitic carbon nanofibers developed from bundles of aligned electrospun polyacrylonitrile nanofibers containing phosphoric acid
  79. Electrospun Composite Nanofiber Fabrics Containing Uniformly Dispersed Antimicrobial Agents As an Innovative Type of Polymeric Materials with Superior Antimicrobial Efficacy
  80. Luminescence Properties of Eu(III) Complex/Polyvinylpyrrolidone Electrospun Composite Nanofibers
  81. Bis-GMA/TEGDMA dental composites reinforced with nano-scaled single crystals of fibrillar silicate
  82. Electrospun nanofiber membranes surface functionalized with 3-dimensional nanolayers as an innovative adsorption medium with ultra-high capacity and throughput
  83. Composite of TiO2 nanofibers and nanoparticles for dye-sensitized solar cells with significantly improved efficiency
  84. Synthesis of continuous TiC nanofibers and/or nanoribbons through electrospinning followed by carbothermal reduction
  85. Generation of polymer ultrafine fibers through solution (air-) blowing
  86. Sorbitan monooleate and poly(L-lactide-co-ε-caprolactone) electrospun nanofibers for endothelial cell interactions
  87. Structural effects of core-modified porphyrins in dye-sensitized solar cells
  88. Fluorescence studies of electrospun MEH-PPV/PEO nanofibers
  89. Rechargeable Antibacterial and Antifungal Polymeric Silver Sulfadiazines
  90. PbS quantum dots embedded TiO2 nanofibers for dye-sensitized solar cells
  91. Development of carbon nanofibers from aligned electrospun polyacrylonitrile nanofiber bundles and characterization of their microstructural, electrical, and mechanical properties
  92. A Metal Matrix Composite Prepared from Electrospun TiO 2 Nanofibers and an Al 1100 Alloy via Friction Stir Processing
  93. Thermo-chemical reactions occurring during the oxidative stabilization of electrospun polyacrylonitrile precursor nanofibers and the resulting structural conversions
  94. Continuous Nanoscale Carbon Fibers with Superior Mechanical Strength
  95. Fabrication and characterization of electrospun titania nanofibers
  96. Synthesis and Characterization of Zirconium Tungstate Ultra-Thin Fibers
  97. Aligned electrospun ZnO nanofibers for simple and sensitive ultraviolet nanosensors
  98. Preparation, characterization, and encapsulation/release studies of a composite nanofiber mat electrospun from an emulsion containing poly(lactic-co-glycolic acid)
  99. Dye-sensitized solar cells based on ZnO nanorod arrays
  100. Nitrile butadiene rubber/hindered phenol nanocomposites with improved strength and high damping performance
  101. Crystalline Morphology and Polymorphic Phase Transitions in Electrospun Nylon-6 Nanofibers
  102. Bis-GMA/TEGDMA dental composites reinforced with electrospun nylon 6 nanocomposite nanofibers containing highly aligned fibrillar silicate single crystals
  103. Preface
  104. Polymeric Nanofibers: Introduction
  105. Investigation of the Formation of Carbon and Graphite Nanofiber from Mesophase Pitch Nanofiber Precursor
  106. Synthesis and luminescence studies of poly(vinyl acetate)–Eu (III) coordination compound
  107. Nanocomposites for Extreme Environments
  108. Electrospun nylon 6 nanofiber reinforced BIS-GMA/TEGDMA dental restorative composite resins
  109. Effects of water contents and postcuring conditions on Bis-GMA/TEGDMA dental restorative composite resins
  110. Self-Passivation of Polymer-Layered Silicate Nanocomposites
  111. Structure of Poly(ferrocenyldimethylsilane) in Electrospun Nanofibers
  112. Bending instability of electrically charged liquid jets of polymer solutions in electrospinning
  113. Elastomeric nanofibers of styrene-butadiene-styrene triblock copolymer