All Stories

  1. Practical Applications of Superhydrophobic Materials and Coatings: Problems and Perspectives
  2. Simple Model for Diffusion-Limited Drop Evaporation of Binary Liquids from Physical Properties of the Components: Ethanol–Water Example
  3. Solvent-Free Synthesis of a Superamphiphobic Surface by Green Chemistry
  4. Surface Modification of 3D Printed PLA Objects by Fused Deposition Modeling: A Review
  5. Transparent, fluorine-free, heat-resistant, water repellent coating by infusing slippery silicone oil on polysiloxane nanofilament layers prepared by gas phase reaction of n-propyltrichlorosilane and methyltrichlorosilane
  6. Evaporation of water-ethanol binary sessile drop on fluoropolymer surfaces: Influence of relative humidity
  7. Wet-spun graphene filaments: effect of temperature of coagulation bath and type of reducing agents on mechanical & electrical properties
  8. Improvement of lubricant-infused surfaces for anti-icing applications
  9. Methyltrichlorosilane polysiloxane filament growth on glass using low cost solvents and comparison with gas phase reactions
  10. Superhydrophobic perfluoropolymer/polystyrene blend films induced by nonsolvent
  11. Ice accretion by spraying supercooled droplets is not dependent on wettability and surface free energy of substrates
  12. Superhydrophobic polysiloxane filament growth on non-activated polymer coatings
  13. ChemInform Abstract: Control of Stain Geometry by Drop Evaporation of Surfactant Containing Dispersions
  14. Improved Icephobic Properties on Surfaces with a Hydrophilic Lubricating Liquid
  15. Superhydrophobic and oleophobic surfaces obtained by graft copolymerization of perfluoroalkyl ethyl acrylate onto SBR rubber
  16. Control of stain geometry by drop evaporation of surfactant containing dispersions
  17. The debate on the dependence of apparent contact angles on drop contact area or three-phase contact line: A review
  18. Effect of surface free energy to control the deposit morphology during evaporation of graphite/SDS dispersion drops
  19. Solution copolymerization of perfluoroalkyl ethyl methacrylate with methyl methacrylate and butyl acrylate: Synthesis and surface properties
  20. Perfluoromethacrylate-styrene statistical copolymers synthesized in CO2-expanded monomers
  21. Comments on the Energy Barrier Calculations during “Stick–Slip” Behavior of Evaporating Droplets Containing Nanoparticles
  22. Osteoselection supported by phase separated polymer blend films
  23. Superhydrophobic perfluoropolymer surfaces having heterogeneous roughness created by dip-coating from solutions containing a nonsolvent
  24. Selective adsorption of L1210 leukemia cells/human leukocytes on micropatterned surfaces prepared from polystyrene/polypropylene-polyethylene blends
  25. Shape and diameter control of C60 fullerene micro-stains by evaporation of aqueous SDS–fullerene dispersion drops
  26. The lifetime of floating liquid marbles: the influence of particle size and effective surface tension
  27. Droplet condensation on polymer surfaces: A review
  28. Bioadhesion to solids: contact angle hysteresis effect
  29. Dropwise condensation rate of water breath figures on polymer surfaces having similar surface free energies
  30. Use of diffusion controlled drop evaporation equations for dropwise condensation during dew formation and effect of neighboring droplets
  31. Surface characterization of flat and rough films of perfluoromethacrylate-methylmethacrylate statistical copolymers synthesized in CO2-expanded monomers
  32. Superhydrophobic terpolymer nanofibers containing perfluoroethyl alkyl methacrylate by electrospinning
  33. ChemInform Abstract: Evaporation of Pure Liquid Sessile and Spherical Suspended Drops: A Review
  34. Evaporation of pure liquid sessile and spherical suspended drops: A review
  35. A spectroscopic study of water-soluble pyronin B and pyronin Y in Langmuir–Blodgett films mixed with stearic acid
  36. Combined XPS and contact angle studies of flat and rough ethylene-vinyl acetate copolymer films
  37. Diffusion-controlled evaporation of sodium dodecyl sulfate solution drops placed on a hydrophobic substrate
  38. Combined XPS and contact angle studies of ethylene vinyl acetate and polyvinyl acetate blends
  39. Effect of pattern size and geometry on the use of Cassie–Baxter equation for superhydrophobic surfaces
  40. Liquid marbles stabilized by graphite particles from aqueous surfactant solutions
  41. Mechanical and thermal properties of perfluoroalkyl ethyl methacrylate–methyl methacrylate statistical copolymers synthesized in supercritical carbon dioxide
  42. Bacterial Adhesion to Low Energy Solid Surfaces: A Surface Thermodynamics Approach
  43. Experimental investigation of inclined liquid water jet flow onto vertically located superhydrophobic surfaces
  44. Effect of contact angle hysteresis on the removal of the sporelings of the green alga Ulva from the fouling-release coatings synthesized from polyolefin polymers
  45. Range of Applicability of the Wenzel and Cassie−Baxter Equations for Superhydrophobic Surfaces†
  46. Evaporation rate of PTFE liquid marbles
  47. Evaporation Rate of Graphite Liquid Marbles: Comparison with Water Droplets
  48. Surface Chemistry of Solid and Liquid Interfaces. By H. Y. Erbil.
  49. Surface Characterization of Poly(l-lactic acid)−Methoxy Poly(ethylene glycol) Diblock Copolymers by Static and Dynamic Contact Angle Measurements, FTIR, and ATR-FTIR
  50. Surface Chemistry of Solid and Liquid Interfaces, by H. Yildirim Erbil
  51. Surface Chemistry
  52. Analysis of Droplet Evaporation on a Superhydrophobic Surface
  53. Transformation of a Simple Plastic into a Superhydrophobic Surface
  54. Vinyl acetate emulsion polymerization and copolymerization with acrylic monomers H Yildirim Erbil CRC Press, Boca Raton, FL, 2000 pp xii + 324, price US$149.95 ISBN 0-849-3 2303-7
  55. Semicontinuous emulsion polymerization of vinyl acetate: Effect of ethoxylation degree of nonionic emulsifiers
  56. Simultaneous Determination of Toluene Diffusion Coefficient in Air from Thin Tube Evaporation and Sessile Drop Evaporation on a Solid Surface
  57. Drop Evaporation on Solid Surfaces:  Constant Contact Angle Mode
  58. Analysis of evaporating thick liquid films on solids
  59. Analysis of Shape Distortions in Sessile Drops
  60. Vinyl Acetate Emulsion Polymerization and Copolymerization with Acrylic Monomers By H. Yildirim Erbil (Kocaeli University, Turkey). CRC Press:  Boca Raton, FL. 2000. xii + 324 pp. $139.95. ISBN 0-8493-2303-7
  61. Determination of Diffusion Coefficient−Vapor Pressure Product of Some Liquids from Hanging Drop Evaporation
  62. Vinyl Acetate Emulsion Polymerization and Copolymerization with Acrylic Monomers
  63. Surface free-energy analysis of energetic poly(glycidyl azide) networks prepared by different reactive systems
  64. Surface free-energy analysis of energetic poly(glycidyl azide) networks prepared by different reactive systems
  65. Determination of the Receding Contact Angle of Sessile Drops on Polymer Surfaces by Evaporation
  66. Determination of the peripheral contact angle of sessile drops on solids from the rate of evaporation
  67. Analysis of evaporating droplets using ellipsoidal cap geometry
  68. Determination of the Peripheral Contact Angle of Sessile Drops on Solids from the Rate of Drop Evaporation
  69. Evaporation of Sessile Drops on Solid Surfaces: Pseudospherical Cap Geometry
  70. Surface Characterization of the Hydroxy-Terminated Poly(ε-caprolactone)/Poly(dimethylsiloxane) Triblock Copolymers by Electron Spectroscopy for Chemical Analysis and Contact Angle Measurements
  71. Evaporation of Sessile Drops on Polymer Surfaces:  Ellipsoidal Cap Geometry
  72. Surface energetics of films of poly(vinyl acetate—butyl acrylate) emulsion copolymers
  73. Surface free energy analysis of polystyrene-poly(?-hydroxynonanoate) graft copolymers
  74. Calculation of Spreading Pressure from Contact Angle Data on Polymer Surfaces
  75. Work of adhesion between water and substituted aromatic hydrocarbons
  76. The work of adhesion between water and simple aromatic hydrocarbons due to short range interactions
  77. Determination of spreading pressure and its effect on polymer surface tension from contact angle data. Combination of the two-liquid contact angle method with the one-liquid contact angle method
  78. Oxygen permeability and surface free energy properties of silicone-containing copolymers of methyl methacrylate
  79. Determination of surface free energy components of polymers from contact angle data using nonlinear programming methods
  80. Determination of polymer-solvent interaction parameter from swelling of networks: the system poly(2-hydroxyethyl methacrylate)-diethylene glycol
  81. Surface-free energy analysis of hydrolyzed ethylene-vinyl acetate copolymers
  82. LENGTHENING THE POSTHARVEST LIFE OF PEACHES BY COATING WITH HYDROPHOBIC EMULSIONS
  83. A new colorimetric method for the determination of the “dissolved” oxygen permeability coefficients of polymeric membranes