Contact

All Stories

  1. Biodiesel production from waste cooking oil using KOH/HY-type nano-catalyst derived from silica sand

    Article • Biofuels, October 2023, Taylor & Francis

    Dr. I. M. R. Fattah

  2. Bi-LSTM and partial mutual information selection-based forecasting groundwater salinization levels

    Article • Water Reuse, August 2023, IWA Publishing

    Dr. I. M. R. Fattah

  3. Recent Advances of Triglyceride Catalytic Pyrolysis via Heterogenous Dolomite Catalyst for Upgrading Biofuel Quality: A Review

    Article • Nanomaterials, June 2023, MDPI AG

    Dr. I. M. R. Fattah

  4. Enhancing and upgrading biogas and biomethane production in anaerobic digestion: a comprehensive review

    Article • Frontiers in Energy Research, June 2023, Frontiers

    Dr. I. M. R. Fattah

  5. An Experimental and Simulation Study of the Active Camber Morphing Concept on Airfoils Using Bio-Inspired Structures

    Article • Biomimetics, June 2023, MDPI AG

    Dr. I. M. R. Fattah

  6. Exploring the Potential of Lignocellulosic Biomass-Derived Polyoxymethylene Dimethyl Ether as a Sustainable Fuel for Internal Combustion Engines

    Article • Energies, June 2023, MDPI AG

    Dr. I. M. R. Fattah

  7. Response surface methodology (RSM) for optimizing engine performance and emissions fueled with biofuel: Review of RSM for sustainability energy transition

    Article • Results in Engineering, June 2023, Elsevier

    Dr. I. M. R. Fattah

  8. Shea Butter Oil Biodiesel Synthesized Using Snail Shell Heterogeneous Catalyst: Performance and Environmental Impact Analysis in Diesel Engine Applications

    Article • Sustainability, May 2023, MDPI AG

    Dr. I. M. R. Fattah

  9. Thermal and combustion characteristics of honge, jatropha, and honge‐jatropha mixed biodiesels

    Article • Environmental Progress & Sustainable Energy, May 2023, Wiley

    Dr. I. M. R. Fattah

  10. Decoding Anaerobic Digestion: A Holistic Analysis of Biomass Waste Technology, Process Kinetics, and Operational Variables

    Article • Energies, April 2023, MDPI AG

    Dr. I. M. R. Fattah

  11. Thermal Performance Evaluation of Plate-Type Heat Exchanger with Alumina–Titania Hybrid Suspensions

    Article • Fluids, April 2023, MDPI AG

    Dr. I. M. R. Fattah

  12. Environmental Analysis, Monitoring, and Process Control Strategy for Reduction of Greenhouse Gaseous Emissions in Thermochemical Reactions

    Article • Atmosphere, March 2023, MDPI AG

    Dr. I. M. R. Fattah

  13. Synthesis of Al Thin Films with High Optical Transmittance by DC Magnetron Sputtering Process Parameter Optimization

    Article • European Journal of Engineering and Technology Research, March 2023, European Open Access Publishing (Europa Publishing)

    Dr. I. M. R. Fattah

  14. Cost-Effective Natural Adsorbents for Remediation of Oil-Contaminated Water

    Article • Water, March 2023, MDPI AG

    Dr. I. M. R. Fattah

  15. Synthesis of Biobased Composite Heterogeneous Catalyst for Biodiesel Production Using Simplex Lattice Design Mixture: Optimization Process by Taguchi Method

    Article • Energies, February 2023, MDPI AG

    Dr. I. M. R. Fattah, Prof. Dr. Ghassan Fadhil Smaisim

  16. Hollow fiber membrane contactor based carbon dioxide absorption − stripping: a review

    Article • Macromolecular Research, January 2023, Springer Science + Business Media

    Dr. I. M. R. Fattah

  17. Black cumin (Nigella sativa L.) essential oil and aroma quality

    Article • January 2023, Elsevier

    Dr. I. M. R. Fattah

  18. Potential Heterogeneous Catalysts from Three Biogenic Residues toward Sustainable Biodiesel Production: Synthesis and Characterization

    Article • ChemistrySelect, December 2022, Wiley

    Dr. I. M. R. Fattah

  19. Effect of palm oil biodiesel blends (B10 and B20) on physical and mechanical properties of nitrile rubber elastomer

    Article • Results in Engineering, December 2022, Elsevier

    Dr. I. M. R. Fattah

  20. Improved prediction accuracy of biomass heating value using proximate analysis with various ANN training algorithms

    Article • Results in Engineering, December 2022, Elsevier

    Dr. I. M. R. Fattah

  21. Improving energy consumption prediction for residential buildings using Modified Wild Horse Optimization with Deep Learning model

    Article • Chemosphere, December 2022, Elsevier

    Dr. I. M. R. Fattah

  22. Kinetic Modelling of Esterification and Transesterification Processes for Biodiesel Production Utilising Waste-Based Resource

    Article • Catalysts, November 2022, MDPI AG

    Dr. I. M. R. Fattah

  23. Sugarcane Biomass as a Source of Biofuel for Internal Combustion Engines (Ethanol and Acetone-Butanol-Ethanol): A Review of Economic Challenges

    Article • Energies, November 2022, MDPI AG

    Dr. I. M. R. Fattah

  24. Biomimicking Nature-Inspired Design Structures—An Experimental and Simulation Approach Using Additive Manufacturing

    Article • Biomimetics, November 2022, MDPI AG

    Dr. I. M. R. Fattah

  25. A framework to assess indicators of the circular economy in biological systems

    Article • Environmental Technology & Innovation, November 2022, Elsevier

    Dr. I. M. R. Fattah

  26. Review of artificial neural networks for gasoline, diesel and homogeneous charge compression ignition engine

    Article • Alexandria Engineering Journal, November 2022, Elsevier

    Dr. I. M. R. Fattah

  27. Progress on Conventional and Advanced Techniques of In Situ Transesterification of Microalgae Lipids for Biodiesel Production

    Article • Energies, September 2022, MDPI AG

    Dr. I. M. R. Fattah

  28. Biodiesel Emissions: A State-of-the-Art Review on Health and Environmental Impacts

    Article • Energies, September 2022, MDPI AG

    Dr. I. M. R. Fattah

  29. Combined assessment of injection timing and exhaust gas recirculation strategy on the performance, emission and combustion characteristics of algae biodiesel powered diesel engine

    Article • Energy Sources Part A Recovery Utilization and Environmental Effects, September 2022, Taylor & Francis

    Dr. I. M. R. Fattah

  30. Correction: Biodiesel production from transesterification of Australian Brassica napus L. oil: optimisation and reaction kinetic model development

    Article • Environment Development and Sustainability, August 2022, Springer Science + Business Media

    Dr. I. M. R. Fattah

  31. Techno-Economic Analysis of Hybrid Diesel Generators and Renewable Energy for a Remote Island in the Indian Ocean Using HOMER Pro

    Article • Sustainability, August 2022, MDPI AG

    Dr. I. M. R. Fattah

  32. Experimental and Computational Study of Mechanical and Thermal Characteristics of h-BN and GNP Infused Polymer Composites for Elevated Temperature Applications

    Article • Materials, August 2022, MDPI AG

    Dr. I. M. R. Fattah

  33. Investigating the evolutionary trends and key enablers of hydrogen production technologies: A patent-life cycle and econometric analysis

    Article • International Journal of Hydrogen Energy, August 2022, Elsevier

    Dr. I. M. R. Fattah

  34. Biodiesel production from transesterification of Australian Brassica napus L. oil: optimisation and reaction kinetic model development

    Article • Environment Development and Sustainability, July 2022, Springer Science + Business Media

    Dr. I. M. R. Fattah

  35. Integrated AHP-TOPSIS under a Fuzzy Environment for the Selection of Waste-To-Energy Technologies in Ghana: A Performance Analysis and Socio-Enviro-Economic Feasibility Study

    Article • International Journal of Environmental Research and Public Health, July 2022, MDPI AG

    Dr. I. M. R. Fattah, Ebenezer Agbozo

  36. Thermogravimetric and combustion efficiency analysis of Jatropha curcas biodiesel and its derivatives

    Article • Biofuels, July 2022, Taylor & Francis

    Dr. I. M. R. Fattah

  37. Techno-Economic Analysis and Optimisation of Campus Grid-Connected Hybrid Renewable Energy System Using HOMER Grid

    Article • Sustainability, June 2022, MDPI AG

    Dr. I. M. R. Fattah

  38. Circular economy, energy transition, and role of hydrogen

    Article • Mechanical Engineering for Society and Industry, June 2022, Universitas Muhammadiyah Magelang

    Dr. I. M. R. Fattah

  39. Phenolic-rich bio-oil production by microwave catalytic pyrolysis of switchgrass: Experimental study, life cycle assessment, and economic analysis

    Article • Journal of Cleaner Production, June 2022, Elsevier

    Dr. I. M. R. Fattah

  40. Developments in Nanoparticles Enhanced Biofuels and Solar Energy in Malaysian Perspective: A Review of State of the Art

    Article • Journal of Nanomaterials, May 2022, Hindawi Publishing Corporation

    Dr. I. M. R. Fattah

  41. Effects of the COVID-19 pandemic on the environment, waste management, and energy sectors: a deeper look into the long-term impacts

    Article • Environmental Science and Pollution Research, May 2022, Springer Science + Business Media

    Dr. I. M. R. Fattah

  42. Progress and Recent Trends in the Application of Nanoparticles as Low Carbon Fuel Additives—A State of the Art Review

    Article • Nanomaterials, April 2022, MDPI AG

    Dr. I. M. R. Fattah

  43. An overview of palm oil biomass for power generation sector decarbonization in Malaysia: Progress, challenges, and prospects

    Article • Wiley Interdisciplinary Reviews Energy and Environment, March 2022, Wiley

    Dr. I. M. R. Fattah

  44. State-of-the-art of the pyrolysis and co-pyrolysis of food waste: Progress and challenges

    Article • The Science of The Total Environment, February 2022, Elsevier

    Dr. I. M. R. Fattah

  45. Current Progress of Jatropha Curcas Commoditisation as Biodiesel Feedstock: A Comprehensive Review

    Article • Frontiers in Energy Research, January 2022, Frontiers

    Dr. I. M. R. Fattah

  46. Study on the tribological characteristics of plant oil-based bio-lubricant with automotive liner-piston ring materials

    Article • Current Research in Green and Sustainable Chemistry, January 2022, Elsevier

    Dr. I. M. R. Fattah

  47. Investigation of flexural properties of epoxy composite by utilizing graphene nanofillers and natural hemp fibre reinforcement

    Article • Polymers and Polymer Composites, January 2022, SAGE Publications

    Dr. I. M. R. Fattah

  48. Microwave Assisted Biodiesel Production Using Heterogeneous Catalysts

    Article • Energies, December 2021, MDPI AG

    Dr. I. M. R. Fattah

  49. Progress on the lignocellulosic biomass pyrolysis for biofuel production toward environmental sustainability

    Article • Fuel Processing Technology, December 2021, Elsevier

    Dr. I. M. R. Fattah

  50. Energy for Sustainable Future

    Article • Energies, November 2021, MDPI AG

    Dr. I. M. R. Fattah

  51. Experimental Study of the Corrosiveness of Ternary Blends of Biodiesel Fuel

    Article • Frontiers in Energy Research, November 2021, Frontiers

    Dr. I. M. R. Fattah

  52. Current State and Perspectives on Transesterification of Triglycerides for Biodiesel Production

    Article • Catalysts, September 2021, MDPI AG

    Dr. I. M. R. Fattah

  53. Potential of Utilization of Renewable Energy Technologies in Gulf Countries

    Article • Sustainability, September 2021, MDPI AG

    Dr. I. M. R. Fattah

  54. State-of-the-Art and Future Perspectives of Environmentally Friendly Machining Using Biodegradable Cutting Fluids

    Article • Energies, August 2021, MDPI AG

    Dr. I. M. R. Fattah

  55. Bio-Based Lubricant in the Presence of Additives

    Article • August 2021, Taylor & Francis

    Dr. I. M. R. Fattah

  56. Bioenergy recovery potential through the treatment of the meat processing industry waste in Australia

    Article • Journal of Environmental Chemical Engineering, August 2021, Elsevier

    Dr. I. M. R. Fattah

  57. Concentrated photovoltaics as light harvesters: Outlook, recent progress, and challenges

    Article • Sustainable Energy Technologies and Assessments, August 2021, Elsevier

    Dr. I. M. R. Fattah

  58. State-of-the-Art of Establishing Test Procedures for Real Driving Gaseous Emissions from Light- and Heavy-Duty Vehicles

    Article • Energies, July 2021, MDPI AG

    Dr. I. M. R. Fattah

  59. A Comprehensive Review on the Recent Development of Ammonia as a Renewable Energy Carrier

    Article • Energies, June 2021, MDPI AG

    Dr. I. M. R. Fattah

  60. Treatment strategies for enhancing the removal of endocrine-disrupting chemicals in water and wastewater systems

    Article • Journal of Water Process Engineering, June 2021, Elsevier

    Dr. I. M. R. Fattah

  61. Valorisation of medical waste through pyrolysis for a cleaner environment: Progress and challenges

    Article • Environmental Pollution, June 2021, Elsevier

    Dr. I. M. R. Fattah

  62. Theoretical calculation of biogas production and greenhouse gas emission reduction potential of livestock, poultry and slaughterhouse waste in Bangladesh

    Article • Journal of Environmental Chemical Engineering, June 2021, Elsevier

    Dr. I. M. R. Fattah

  63. Production and investigation of mechanical properties of graphene/polystyrene nano composites

    Article • Journal of Polymer Research, May 2021, Springer Science + Business Media

    Dr. I. M. R. Fattah

  64. Evaluation of a compression ignition engine performance and emission characteristics using diesel-essential oil blends of high orange oil content

    Article • Australian Journal of Mechanical Engineering, April 2021, Taylor & Francis

    Dr. I. M. R. Fattah

  65. Diesel Emissions and Approaches to their Mitigation

    Article • April 2021, Taylor & Francis

    Dr. I. M. R. Fattah

  66. Impact of COVID-19 on the social, economic, environmental and energy domains: Lessons learnt from a global pandemic

    Article • Sustainable Production and Consumption, April 2021, Elsevier

    Dr. I. M. R. Fattah

  67. State-of-the-Art of Strategies to Reduce Exhaust Emissions from Diesel Engine Vehicles

    Article • Energies, March 2021, MDPI AG

    Dr. I. M. R. Fattah

  68. Influence of Silica Nano-Additives on Performance and Emission Characteristics of Soybean Biodiesel Fuelled Diesel Engine

    Article • Energies, March 2021, MDPI AG

    Dr. I. M. R. Fattah

  69. A comprehensive review on anaerobic digestion of organic fraction of municipal solid waste

    Article • Renewable and Sustainable Energy Reviews, March 2021, Elsevier

    Dr. I. M. R. Fattah

  70. Engine performance and emission characteristics of palm biodiesel blends with graphene oxide nanoplatelets and dimethyl carbonate additives

    Article • Journal of Environmental Management, March 2021, Elsevier

    Dr. I. M. R. Fattah

  71. A ranking scheme for biodiesel underpinned by critical physicochemical properties

    Article • Energy Conversion and Management, February 2021, Elsevier

    Dr. I. M. R. Fattah

  72. Recent advances in biodiesel production from agricultural products and microalgae using ionic liquids: Opportunities and challenges

    Article • Energy Conversion and Management, January 2021, Elsevier

    Dr. I. M. R. Fattah

  73. Maximising Yield and Engine Efficiency Using Optimised Waste Cooking Oil Biodiesel

    Article • Energies, November 2020, MDPI AG

    Dr Muhammad Amjad, Dr. I. M. R. Fattah

  74. The rise of real drive emission to mitigate difference of lab tests and on-road emission

    Article • October 2020, Center for Open Science

    Dr. I. M. R. Fattah

  75. Relationship between Weather Variables and New Daily COVID-19 Cases in Dhaka, Bangladesh

    Article • Sustainability, October 2020, MDPI AG

    Mohammad Asaduzzaman Chowdhury, Professor Mohammad Asaduzzaman Chowdhury, Dr. I. M. R. Fattah

  76. COMPARISON OF STANDARD k-epsilon AND SST k-omega TURBULENCE MODEL FOR BREASTSHOT WATERWHEEL SIMULATION

    Article • Journal of Mechanical Science and Engineering, October 2020, Universitas Sriwijaya - Pusat Inovasi Pembelajaran Unsri

    Dr. I. M. R. Fattah

  77. Effect of nanocatalysts on the transesterification reaction of first, second and third generation biodiesel sources- A mini-review

    Article • Chemosphere, October 2020, Elsevier

    Mohammad Asaduzzaman Chowdhury, Professor Mohammad Asaduzzaman Chowdhury, Dr. I. M. R. Fattah

  78. Enhancement in Combustion, Performance, and Emission Characteristics of a Diesel Engine Fueled with Ce-ZnO Nanoparticle Additive Added to Soybean Biodiesel Blends

    Article • Energies, September 2020, MDPI AG

    Dr. I. M. R. Fattah

  79. Lipid Extraction Maximization and Enzymatic Synthesis of Biodiesel from Microalgae

    Article • Applied Sciences, September 2020, MDPI AG

    Dr. I. M. R. Fattah

  80. Effect of Additivized Biodiesel Blends on Diesel Engine Performance, Emission, Tribological Characteristics, and Lubricant Tribology

    Article • Energies, July 2020, MDPI AG

    Dr. I. M. R. Fattah

  81. State of the Art of Catalysts for Biodiesel Production

    Article • Frontiers in Energy Research, June 2020, Frontiers

    Dr. I. M. R. Fattah

  82. Resource Recovery from Waste Coffee Grounds Using Ultrasonic-Assisted Technology for Bioenergy Production

    Article • Energies, April 2020, MDPI AG

    Dr. I. M. R. Fattah

  83. Color-ratio pyrometry methods for flame–wall impingement study

    Article • December 2019, Elsevier

    Dr. I. M. R. Fattah

  84. Effects of flame-plane wall impingement on diesel combustion and soot processes

    Article • Fuel, November 2019, Elsevier

    Dr. I. M. R. Fattah

  85. Flame–Wall Interaction Effects on Diesel Post-injection Combustion and Soot Formation Processes

    Article • Energy & Fuels, July 2019, American Chemical Society (ACS)

    Dr. I. M. R. Fattah

  86. Spray and Combustion Investigation of Post Injections under Low-Temperature Combustion Conditions with Biodiesel

    Article • Energy & Fuels, July 2018, American Chemical Society (ACS)

    Dr. I. M. R. Fattah

  87. Combustion characterization of waste cooking oil and canola oil based biodiesels under simulated engine conditions

    Article • Fuel, July 2018, Elsevier

    Dr. I. M. R. Fattah

  88. Study of production optimization and effect of hydroxyl gas on a CI engine performance and emission fueled with biodiesel blends

    Article • International Journal of Hydrogen Energy, September 2016, Elsevier

    Dr. I. M. R. Fattah

  89. Production of biodiesel from a non-edible source and study of its combustion, and emission characteristics: A comparative study with B5

    Article • Renewable Energy, April 2016, Elsevier

    Dr. I. M. R. Fattah

  90. ChemInform Abstract: State of the Art of Biodiesel Production Processes: A Review of the Heterogeneous Catalyst

    Article • ChemInform, February 2016, Wiley

    Dr. I. M. R. Fattah

  91. Production, characterization, engine performance and emission characteristics of Croton megalocarpus and Ceiba pentandra complementary blends in a single-cylinder diesel engine

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Dr. I. M. R. Fattah

  92. Effect of antioxidant on the oxidation stability and combustion–performance–emission characteristics of a diesel engine fueled with diesel–biodiesel blend

    Article • Energy Conversion and Management, December 2015, Elsevier

    Dr. I. M. R. Fattah

  93. Study on stability, fuel properties, engine combustion, performance and emission characteristics of biofuel emulsion

    Article • Renewable and Sustainable Energy Reviews, December 2015, Elsevier

    Dr. I. M. R. Fattah

  94. Influence of biodiesel blending on physicochemical properties and importance of mathematical model for predicting the properties of biodiesel blend

    Article • Energy Conversion and Management, April 2015, Elsevier

    Dr. I. M. R. Fattah

  95. Effect of n-butanol and diethyl ether as oxygenated additives on combustion–emission-performance characteristics of a multiple cylinder diesel engine fuelled with diesel–jatropha biodiesel blend

    Article • Energy Conversion and Management, April 2015, Elsevier

    Dr. I. M. R. Fattah

  96. Oil filter modification for biodiesel–fueled engine: A pathway to lubricant sustainability and exhaust emissions reduction

    Article • Energy Conversion and Management, February 2015, Elsevier

    Dr. I. M. R. Fattah

  97. Biodiesel production, characterization, diesel engine performance, and emission characteristics of methyl esters from Aphanamixis polystachya oil of Bangladesh

    Article • Energy Conversion and Management, February 2015, Elsevier

    Dr. I. M. R. Fattah

  98. Effects of Palm–Coconut Biodiesel Blends on the Performance and Emission of a Single-Cylinder Diesel Engine

    Article • Energy & Fuels, January 2015, American Chemical Society (ACS)

    Dr. I. M. R. Fattah

  99. Characterization and prediction of blend properties and evaluation of engine performance and emission parameters of a CI engine operated with various biodiesel blends

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Dr. I. M. R. Fattah

  100. Evaluation of n-butanol as an oxygenated additive to improve combustion-emission-performance characteristics of a diesel engine fuelled with a diesel-calophyllum inophyllum biodiesel blend

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Dr. I. M. R. Fattah

  101. Evaluation of combustion, performance, and emissions of optimum palm–coconut blend in turbocharged and non-turbocharged conditions of a diesel engine

    Article • Energy Conversion and Management, January 2015, Elsevier

    Dr. I. M. R. Fattah

  102. State of the art of biodiesel production processes: a review of the heterogeneous catalyst

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Dr. I. M. R. Fattah

  103. Effect of synthetic antioxidants on storage stability of Calophyllum inophyllum biodiesel

    Article • Materials Research Innovations, December 2014, Taylor & Francis

    Dr. I. M. R. Fattah

  104. A review on idling reduction strategies to improve fuel economy and reduce exhaust emissions of transport vehicles

    Article • Energy Conversion and Management, December 2014, Elsevier

    Dr. I. M. R. Fattah

  105. Biodiesel production and performance evaluation of coconut, palm and their combined blend with diesel in a single-cylinder diesel engine

    Article • Energy Conversion and Management, November 2014, Elsevier

    Dr. I. M. R. Fattah

  106. Rice bran: A prospective resource for biodiesel production in Bangladesh

    Article • International Journal of Green Energy, October 2014, Taylor & Francis

    Dr. I. M. R. Fattah

  107. Synthetic phenolic antioxidants to biodiesel: path toward NOx reduction of an unmodified indirect injection diesel engine

    Article • Journal of Cleaner Production, September 2014, Elsevier

    Dr. I. M. R. Fattah

  108. Impact of biodiesel blend on injector deposit formation

    Article • Proceedings of the Institution of Civil Engineers - Energy, August 2014, Elsevier

    Dr. I. M. R. Fattah

  109. Performance, emissions, and heat losses of palm and jatropha biodiesel blends in a diesel engine

    Article • Industrial Crops and Products, August 2014, Elsevier

    Dr. I. M. R. Fattah

  110. Experimental investigation of performance and regulated emissions of a diesel engine with Calophyllum inophyllum biodiesel blends accompanied by oxidation inhibitors

    Article • Energy Conversion and Management, July 2014, Elsevier

    Dr. I. M. R. Fattah

  111. Performance and emission characteristics of a CI engine fueled with Cocos nucifera and Jatropha curcas B20 blends accompanying antioxidants

    Article • Industrial Crops and Products, June 2014, Elsevier

    Dr. I. M. R. Fattah

  112. Impact of low temperature combustion attaining strategies on diesel engine emissions for diesel and biodiesels: A review

    Article • Energy Conversion and Management, April 2014, Elsevier

    Dr. I. M. R. Fattah

  113. Production and comparison of fuel properties, engine performance, and emission characteristics of biodiesel from various non-edible vegetable oils: A review

    Article • Energy Conversion and Management, April 2014, Elsevier

    Dr. I. M. R. Fattah

  114. Feasibility of diesel–biodiesel–ethanol/bioethanol blend as existing CI engine fuel: An assessment of properties, material compatibility, safety and combustion

    Article • Renewable and Sustainable Energy Reviews, April 2014, Elsevier

    Dr. I. M. R. Fattah

  115. Effect of antioxidant on the performance and emission characteristics of a diesel engine fueled with palm biodiesel blends

    Article • Energy Conversion and Management, March 2014, Elsevier

    Dr. I. M. R. Fattah

  116. Effect of antioxidants on oxidation stability of biodiesel derived from vegetable and animal based feedstocks

    Article • Renewable and Sustainable Energy Reviews, February 2014, Elsevier

    Dr. I. M. R. Fattah

  117. Comparative evaluation of performance and emission characteristics of Moringa oleifera and Palm oil based biodiesel in a diesel engine

    Article • Industrial Crops and Products, February 2014, Elsevier

    Dr. I. M. R. Fattah

  118. Biodiesel production, characterization, engine performance, and emission characteristics of Malaysian Alexandrian laurel oil

    Article • RSC Advances, January 2014, Royal Society of Chemistry

    Dr. I. M. R. Fattah

  119. Performance and emission analysis of a multi cylinder gasoline engine operating at different alcohol–gasoline blends

    Article • RSC Advances, January 2014, Royal Society of Chemistry

    Mr B.M. Masum, Dr. I. M. R. Fattah

  120. Evaluation of rice bran, sesame and moringa oils as feasible sources of biodiesel and the effect of blending on their physicochemical properties

    Article • RSC Advances, January 2014, Royal Society of Chemistry

    Mr Md A Wakil, Dr. I. M. R. Fattah

  121. Emission and Performance Improvement Analysis of Biodiesel-diesel Blends with Additives

    Article • Procedia Engineering, January 2014, Elsevier

    Dr. I. M. R. Fattah

  122. Experimental Investigation of a Multicylinder Unmodified Diesel Engine Performance, Emission, and Heat Loss Characteristics Using Different Biodiesel Blends: Rollout of B10 in Malaysia

    Article • The Scientific World JOURNAL, January 2014, Hindawi Publishing Corporation

    Dr. I. M. R. Fattah

  123. Effect of ethanol–gasoline blend on NOx emission in SI engine

    Article • Renewable and Sustainable Energy Reviews, August 2013, Elsevier

    Mr B.M. Masum, Dr. I. M. R. Fattah

  124. Impacts of biodiesel combustion on NOx emissions and their reduction approaches

    Article • Renewable and Sustainable Energy Reviews, July 2013, Elsevier

    Dr. I. M. R. Fattah

  125. Impact of various biodiesel fuels obtained from edible and non-edible oils on engine exhaust gas and noise emissions

    Article • Renewable and Sustainable Energy Reviews, February 2013, Elsevier

    Dr. I. M. R. Fattah

  126. Effect of Coconut Biodiesel Blended Fuels on Engine Performance and Emission Characteristics

    Article • Procedia Engineering, January 2013, Elsevier

    Dr. I. M. R. Fattah