All Stories

  1. Explaining the drop of work-hardening rate and limitation of transformation-induced plasticity effect in metastable stainless steels during tensile deformation

    Article • Scripta Materialia, July 2023, Elsevier

    Professor Hamed Mirzadeh

  2. Dissolution kinetics of Laves phase during homogenization heat treatment of additively manufactured Inconel 718 superalloy

    Article • Journal of Materials Research and Technology, April 2023, Elsevier

    Professor Hamed Mirzadeh

  3. Superplasticity of fine-grained magnesium alloys for biomedical applications: A comprehensive review

    Article • Current Opinion in Solid State and Materials Science, April 2023, Elsevier

    Professor Hamed Mirzadeh

  4. A review of Mg alloys containing long-period stacking ordered (LPSO) structures with insight into the application of friction stir processing

    Article • Journal of Materials Research and Technology, April 2023, Elsevier

    Professor Hamed Mirzadeh

  5. Grain refinement and improved mechanical properties of Mg-4Zn-0.5Ca-0.5RE magnesium alloy by thermomechanical processing

    Article • Journal of Alloys and Compounds, April 2023, Elsevier

    Professor Hamed Mirzadeh

  6. Dependency of work-hardening behavior of a metastable austenitic stainless steel on the nucleation site of deformation-induced martensite

    Article • Materials Science and Engineering A, March 2023, Elsevier

    Professor Hamed Mirzadeh

  7. Mechanical Properties and Corrosion Behavior of Biodegradable Mg–0.5Zr–0.5Ca– x Zn Magnesium Alloys

    Article • Advanced Engineering Materials, January 2023, Wiley

    Professor Hamed Mirzadeh

  8. Grain size dependent mechanical behavior and TRIP effect in a metastable austenitic stainless steel

    Article • International Journal of Plasticity, January 2023, Elsevier

    Professor Hamed Mirzadeh

  9. Elucidating the effects of cold rolling route on the mechanical properties of AISI 316L austenitic stainless steel

    Article • Materials Science and Engineering A, January 2023, Elsevier

    Professor Hamed Mirzadeh

  10. Microstructure and mechanical properties of as-cast and wrought Mg–Ni in-situ formed alloys

    Article • Materials Science and Technology, December 2022, Taylor & Francis

    Professor Hamed Mirzadeh

  11. Thermal stability, grain growth kinetics, mechanical properties, and bio-corrosion resistance of pure Mg, ZK30, and ZEK300 alloys: A comparative study

    Article • Materials Today Communications, December 2022, Elsevier

    Professor Hamed Mirzadeh

  12. Tailoring the mechanical properties of austempered low-carbon ferritic–bainitic/martensitic dual-phase steel

    Article • Archives of Civil and Mechanical Engineering, November 2022, Springer Science + Business Media

    Professor Hamed Mirzadeh

  13. Enhancing the elevated temperatures tribological properties of Al–Mg2Si composites by in-situ addition of Ti-based intermetallics and hot working

    Article • Journal of Materials Research and Technology, November 2022, Elsevier

    Professor Hamed Mirzadeh

  14. Post-processing of additively manufactured high-entropy alloys - A review

    Article • Journal of Materials Research and Technology, November 2022, Elsevier

    Professor Hamed Mirzadeh

  15. On the solidification characteristics and corrosion resistance of in situ Mg–3Si-xCu composites

    Article • Vacuum, October 2022, Elsevier

    Professor Hamed Mirzadeh

  16. Effects of titanium addition on the microstructure and mechanical properties of quaternary CoCrFeNi high entropy alloy

    Article • Materials Science and Engineering A, October 2022, Elsevier

    Professor Hamed Mirzadeh

  17. Grain Growth in High-Entropy Alloys (HEAs): A Review

    Article • High Entropy Alloys & Materials, August 2022, Springer Science + Business Media

    Professor Hamed Mirzadeh

  18. Post-processing heat treatment of lightweight magnesium alloys fabricated by additive manufacturing: A review

    Article • Journal of Materials Research and Technology, August 2022, Elsevier

    Professor Hamed Mirzadeh

  19. Tribological behavior of as-cast and wrought Al-Mg2Si hybrid composites reinforced by Ti-based intermetallics

    Article • Journal of Materials Research and Technology, August 2022, Elsevier

    Professor Hamed Mirzadeh

  20. Heterostructured stainless steel: Properties, current trends, and future perspectives

    Article • Materials Science and Engineering R Reports, August 2022, Elsevier

    Professor Hamed Mirzadeh

  21. Effect of grain size on the mechanical properties and bio-corrosion resistance of pure magnesium

    Article • Journal of Materials Research and Technology, July 2022, Elsevier

    Professor Hamed Mirzadeh

  22. Tailoring the tensile properties of AZ91 magnesium alloy via grain refinement

    Article • Materials Science and Technology, June 2022, Taylor & Francis

    Professor Hamed Mirzadeh

  23. Effect of Variation of Martensite with a Constant Carbon Content on Mechanical Behavior and Sliding Wear of Dual Phase Steels

    Article • Tribology Letters, June 2022, Springer Science + Business Media

    Professor Hamed Mirzadeh

  24. Additive manufacturing – A review of hot deformation behavior and constitutive modeling of flow stress

    Article • Current Opinion in Solid State and Materials Science, June 2022, Elsevier

    Professor Hamed Mirzadeh

  25. Enhanced mechanical properties of as-cast rare earth bearing magnesium alloy via elevated-temperature homogenization

    Article • Materials Today Communications, June 2022, Elsevier

    Professor Hamed Mirzadeh

  26. Improvement of mechanical properties of in situ Mg-Si composites via Cu addition and hot working

    Article • Journal of Alloys and Compounds, June 2022, Elsevier

    Professor Hamed Mirzadeh

  27. Cold unidirectional/cross-rolling of austenitic stainless steels: a review

    Article • Archives of Civil and Mechanical Engineering, May 2022, Springer Science + Business Media

    Professor Hamed Mirzadeh

  28. Superplasticity of bulk metallic glasses (BMGs): A review

    Article • Journal of Non-Crystalline Solids, May 2022, Elsevier

    Professor Hamed Mirzadeh

  29. A review of hot deformation behavior and constitutive models to predict flow stress of high-entropy alloys

    Article • Journal of Alloys and Compounds, May 2022, Elsevier

    Professor Hamed Mirzadeh

  30. Mechanical properties of as-cast and wrought Mg–5Ni-xAl magnesium alloys

    Article • Materials Science and Engineering A, April 2022, Elsevier

    Professor Hamed Mirzadeh

  31. Tailoring the mechanical properties of hypereutectic in situ Al–Mg2Si composites via hybrid TiB2 reinforcement and hot extrusion

    Article • Archives of Civil and Mechanical Engineering, March 2022, Springer Science + Business Media

    Professor Hamed Mirzadeh

  32. Detailed Hall–Petch Analysis of Cold Rolled and Annealed Duplex 2205 Stainless Steel

    Article • steel research international, March 2022, Wiley

    Professor Hamed Mirzadeh

  33. Microstructure, mechanical properties, and pitting corrosion resistance of SAF 2205 duplex stainless steel after friction hydro-pillar processing

    Article • The International Journal of Advanced Manufacturing Technology, February 2022, Springer Science + Business Media

    Professor Hamed Mirzadeh

  34. Microstructures and mechanical performance of Mg–4Si–6Ni–xY in situ composite after extrusion process

    Article • Materials Science and Technology, January 2022, Taylor & Francis

    Professor Hamed Mirzadeh

  35. Amorphization, mechano-crystallization, and crystallization kinetics of mechanically alloyed AlFeCuZnTi high-entropy alloys

    Article • Materials Letters, January 2022, Elsevier

    Professor Hamed Mirzadeh

  36. Microstructure and Mechanical Properties of Dual‐Phase Steels by Combining Adjusted Initial Microstructures and Severe Plastic Deformation

    Article • steel research international, December 2021, Wiley

    Professor Hamed Mirzadeh

  37. Superplasticity of high-entropy alloys: a review

    Article • Archives of Civil and Mechanical Engineering, December 2021, Springer Science + Business Media

    Professor Hamed Mirzadeh

  38. Enhanced mechanical properties of Mg–Ni–xRE alloys via hot extrusion

    Article • Materials Science and Technology, November 2021, Taylor & Francis

    Professor Hamed Mirzadeh

  39. Synergistic Effects of Cerium-Based Rare Earth Addition and Hot Deformation on the Microstructure and Mechanical Properties of Mg-0.5Zn-0.5Zr Magnesium Alloy

    Article • Metals and Materials International, September 2021, Springer Science + Business Media

    Professor Hamed Mirzadeh

  40. Synergistic effects of alloying, homogenization, and hot extrusion on the mechanical properties of as-cast Mg–Al–Ca magnesium alloys

    Article • Archives of Civil and Mechanical Engineering, August 2021, Springer Science + Business Media

    Professor Hamed Mirzadeh

  41. Enhanced mechanical properties of as-cast Mg-Al-Ca magnesium alloys by friction stir processing

    Article • Materials Letters, August 2021, Elsevier

    Professor Hamed Mirzadeh

  42. Effect of microalloying by Ca on the microstructure and mechanical properties of as-cast and wrought Mg–Mg2Si composites

    Article • Materials Science and Engineering A, July 2021, Elsevier

    Professor Hamed Mirzadeh

  43. High strain rate superplasticity via friction stir processing (FSP): A review

    Article • Materials Science and Engineering A, July 2021, Elsevier

    Professor Hamed Mirzadeh

  44. Tempering kinetics and corrosion resistance of quenched and tempered AISI 4130 medium carbon steel

    Article • Werkstoffe und Korrosion, June 2021, Wiley

    Professor Hamed Mirzadeh

  45. Enhanced tensile properties of as-cast Mg-10Al magnesium alloy via strontium addition and hot working

    Article • Archives of Civil and Mechanical Engineering, May 2021, Springer Science + Business Media

    Professor Hamed Mirzadeh

  46. Processing, microstructure adjustments, and mechanical properties of dual phase steels: a review

    Article • Materials Science and Technology, April 2021, Taylor & Francis

    Professor Hamed Mirzadeh

  47. Recent advances in the kinetics of normal/abnormal grain growth: a review

    Article • Archives of Civil and Mechanical Engineering, February 2021, Springer Science + Business Media

    Professor Hamed Mirzadeh

  48. Finite element analysis of plastic deformation in shear punch test

    Article • Materials Letters, February 2021, Elsevier

    Professor Hamed Mirzadeh

  49. Enhanced mechanical properties of dual phase steel via cross rolling and intercritical annealing

    Article • Materials Science and Engineering A, February 2021, Elsevier

    Professor Hamed Mirzadeh

  50. Mechanical response of a metastable austenitic stainless steel under different deformation modes

    Article • Materials Science and Technology, January 2021, Taylor & Francis

    Professor Hamed Mirzadeh

  51. Enhanced mechanical properties of AZ91 magnesium alloy by inoculation and hot deformation

    Article • Materials Science and Engineering A, January 2021, Elsevier

    Professor Hamed Mirzadeh

  52. Effects of spheroidization heat treatment and intercritical annealing on mechanical properties and corrosion resistance of medium carbon dual phase steel

    Article • Materials Chemistry and Physics, January 2021, Elsevier

    Professor Hamed Mirzadeh

  53. Mechanical alloying and consolidation of copper‐iron‐silicon carbide nanocomposites

    Article • Materialwissenschaft und Werkstofftechnik, December 2020, Wiley

    Professor Hamed Mirzadeh

  54. Delta processing effects on the creep behavior of a typical Nb-bearing nickel-based superalloy

    Article • Vacuum, November 2020, Elsevier

    Professor Hamed Mirzadeh

  55. Mechanical Behavior of As-Cast and Extruded Mg-Si-Ni-Ca Magnesium Alloys

    Article • Journal of Materials Engineering and Performance, October 2020, Springer Science + Business Media

    Professor Hamed Mirzadeh

  56. A dislocation assisted self-consistent constitutive model for the high-temperature deformation of particulate metal-matrix composite

    Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, October 2020, Taylor & Francis

    Professor Hamed Mirzadeh

  57. Deformation-induced martensite in austenitic stainless steels: A review

    Article • Archives of Civil and Mechanical Engineering, October 2020, Springer Science + Business Media

    Professor Hamed Mirzadeh

  58. Improved properties of dual-phase steel via pre-intercritical annealing treatment and thermal cycling

    Article • Materials Science and Technology, September 2020, Taylor & Francis

    Professor Hamed Mirzadeh

  59. Transformation-induced plasticity (TRIP) in advanced steels: A review

    Article • Materials Science and Engineering A, September 2020, Elsevier

    Professor Hamed Mirzadeh

  60. Two-step annealing treatment for grain refinement of cold-worked AISI 316L stainless steel

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), August 2020, De Gruyter

    Professor Hamed Mirzadeh

  61. Enhanced mechanical properties of as-cast AZ91 magnesium alloy by combined RE-Sr addition and hot extrusion

    Article • Materials Science and Engineering A, August 2020, Elsevier

    Professor Hamed Mirzadeh

  62. Hot deformation behavior and flow stress modeling of Ti–6Al–4V alloy produced via electron beam melting additive manufacturing technology in single β-phase field

    Article • Materials Science and Engineering A, August 2020, Elsevier

    Professor Hamed Mirzadeh

  63. A review of recent progress in mechanical and corrosion properties of dual phase steels

    Article • Archives of Civil and Mechanical Engineering, July 2020, Springer Science + Business Media

    Professor Hamed Mirzadeh

  64. Evolutions of mechanical properties of AISI 304L stainless steel under shear loading

    Article • Materials Science and Engineering A, July 2020, Elsevier

    Professor Hamed Mirzadeh

  65. Crystallization kinetics of mechanically alloyed amorphous Fe-Ti alloys during annealing

    Article • Advanced Powder Technology, June 2020, Elsevier

    Professor Hamed Mirzadeh

  66. Unraveling the Effect of Deformation Temperature on the Mechanical Behavior and Transformation‐Induced Plasticity of the SUS304L Stainless Steel

    Article • steel research international, May 2020, Wiley

    Professor Hamed Mirzadeh

  67. Elucidating the effects of microsegregation on the precipitation phenomena in as-cast Nb-bearing superalloy

    Article • Materials Letters, May 2020, Elsevier

    Professor Hamed Mirzadeh

  68. Precipitation kinetics of γ″ phase and its mechanism in a Nb-bearing nickel-based superalloy during aging

    Article • Vacuum, May 2020, Elsevier

    Professor Hamed Mirzadeh

  69. Significance of Martensite Reversion and Austenite Stability to the Mechanical Properties and Transformation-Induced Plasticity Effect of Austenitic Stainless Steels

    Article • Journal of Materials Engineering and Performance, April 2020, Springer Science + Business Media

    Professor Hamed Mirzadeh

  70. Thermal Mechanisms of Grain Refinement in Steels: A Review

    Article • Metals and Materials International, April 2020, Springer Science + Business Media

    Professor Hamed Mirzadeh

  71. Thermodynamics basis of saturation of martensite content during reversion annealing of cold rolled metastable austenitic steel

    Article • Vacuum, April 2020, Elsevier

    Professor Hamed Mirzadeh

  72. Effects of hot rolling and homogenisation treatment on low alloy steel ingot

    Article • Materials Science and Technology, March 2020, Taylor & Francis

    Professor Hamed Mirzadeh

  73. Effects of tempering on the mechanical and corrosion properties of dual phase steel

    Article • Materials Today Communications, March 2020, Elsevier

    Professor Hamed Mirzadeh

  74. Phase Transformation Kinetics During Annealing of Cold-Rolled AISI 309Si Stainless Steel

    Article • Metallurgical and Materials Transactions A, February 2020, Springer Science + Business Media

    Professor Hamed Mirzadeh

  75. Unraveling the effects of surface preparation on the pitting corrosion resistance of austenitic stainless steel

    Article • Archives of Civil and Mechanical Engineering, February 2020, Springer Science + Business Media

    Professor Hamed Mirzadeh

  76. Tempering of Cold-Rolled Martensite in Mild Steel and Elucidating the Effects of Alloying Elements

    Article • Journal of Materials Engineering and Performance, February 2020, Springer Science + Business Media

    Professor Hamed Mirzadeh

  77. Tailoring the mechanical properties of Mg–Zn magnesium alloy by calcium addition and hot extrusion process

    Article • Materials Science and Engineering A, February 2020, Elsevier

    Professor Hamed Mirzadeh

  78. Unexpected formation of delta (δ) phase in as-cast niobium-bearing superalloy at solution annealing temperatures

    Article • Materials Letters, February 2020, Elsevier

    Professor Hamed Mirzadeh

  79. Static recrystallization kinetics of ferrite in cold-deformed medium carbon steel

    Article • Materials Research Express, January 2020, Institute of Physics Publishing

    Professor Hamed Mirzadeh

  80. Estimation of homogenisation time for superalloys based on a new diffusional model

    Article • Materials Science and Technology, December 2019, Taylor & Francis

    Professor Hamed Mirzadeh

  81. Effect of grain size on the corrosion resistance of low carbon steel

    Article • Materials Research Express, December 2019, Institute of Physics Publishing

    Professor Hamed Mirzadeh

  82. Constitutive modeling of flow stress during hot deformation of Sn–Al–Zn–Cu–Mg multi-principal-element alloy

    Article • Vacuum, December 2019, Elsevier

    Professor Hamed Mirzadeh

  83. Numerical and analytical solutions for determination of interdiffusion coefficients in superalloys during homogenization

    Article • Materials Today Communications, December 2019, Elsevier

    Professor Hamed Mirzadeh

  84. Microstructure tailoring for property improvements of DP steel via cyclic intercritical annealing

    Article • Materials Research Express, November 2019, Institute of Physics Publishing

    Professor Hamed Mirzadeh

  85. Unraveling the Effect of Martensite Volume Fraction on the Mechanical and Corrosion Properties of Low‐Carbon Dual‐Phase Steel

    Article • steel research international, November 2019, Wiley

    Professor Hamed Mirzadeh

  86. Interdiffusion coefficients of alloying elements in a typical Ni-based superalloy

    Article • Vacuum, November 2019, Elsevier

    Professor Hamed Mirzadeh

  87. Effect of Gd on Dynamic Recrystallization Behavior of Magnesium During Hot Compression

    Article • Metals and Materials International, October 2019, Springer Science + Business Media

    Professor Hamed Mirzadeh

  88. Evaluating the Effect of Hot‐Rolling Reduction on the Mechanical Properties of In Situ Formed Aluminum–Magnesium–Silicon (Al‐Mg 2 Si) Composites

    Article • Advanced Engineering Materials, October 2019, Wiley

    Professor Hamed Mirzadeh

  89. Processing Route Effects on the Mechanical and Corrosion Properties of Dual Phase Steel

    Article • Metals and Materials International, October 2019, Springer Science + Business Media

    Professor Hamed Mirzadeh

  90. Phase transformation mechanism and kinetics during step quenching of st37 low carbon steel

    Article • Materials Research Express, September 2019, Institute of Physics Publishing

    Professor Hamed Mirzadeh

  91. Grain refinement and enhanced mechanical properties of ZK20 magnesium alloy via hot extrusion and mischmetal addition

    Article • Materials Research Express, September 2019, Institute of Physics Publishing

    Professor Hamed Mirzadeh

  92. Improved Mechanical Properties of Structural Steel via Developing Bimodal Grain Size Distribution and Intercritical Heat Treatment

    Article • Journal of Materials Engineering and Performance, September 2019, Springer Science + Business Media

    Professor Hamed Mirzadeh

  93. Ferrite recrystallisation and intercritical annealing of cold-rolled low alloy medium carbon steel

    Article • Materials Science and Technology, September 2019, Taylor & Francis

    Professor Hamed Mirzadeh

  94. Amorphization and mechano-crystallization of high-energy ball milled Fe Ti alloys

    Article • Journal of Non-Crystalline Solids, September 2019, Elsevier

    Professor Hamed Mirzadeh

  95. Effect of Zn addition on the microstructure and mechanical properties of Mg-0.5Ca-0.5RE magnesium alloy

    Article • Journal of Alloys and Compounds, September 2019, Elsevier

    Professor Hamed Mirzadeh

  96. Unraveling the effects of Zn addition and hot extrusion process on the microstructure and mechanical properties of as-cast Mg–2Al magnesium alloy

    Article • Vacuum, September 2019, Elsevier

    Professor Hamed Mirzadeh

  97. Dependency of Natural Aging on the Ferritfoe Grain Size in Dual-Phase Steel

    Article • Metallurgical and Materials Transactions A, August 2019, Springer Science + Business Media

    Professor Hamed Mirzadeh

  98. Aging kinetics and mechanical properties of copper-bearing low-carbon HSLA-100 microalloyed steel

    Article • Archives of Civil and Mechanical Engineering, August 2019, Elsevier

    Professor Hamed Mirzadeh

  99. Toward understanding the origins of poor ductility in a metal-matrix composite processed by accumulative roll bonding (ARB)

    Article • Archives of Civil and Mechanical Engineering, August 2019, Springer Science + Business Media

    Professor Hamed Mirzadeh

  100. Mechanical properties of Mg-Al-Mn magnesium alloys with low Al content in the as-cast and extruded conditions

    Article • Materials Research Express, July 2019, Institute of Physics Publishing

    Professor Hamed Mirzadeh

  101. Effects of Grain Size on Mechanical Properties and Work‐Hardening Behavior of AISI 304 Austenitic Stainless Steel

    Article • steel research international, July 2019, Wiley

    Professor Hamed Mirzadeh

  102. Revisiting the Diffusion of Niobium in an As-Cast Nickel-Based Superalloy During Annealing at Elevated Temperatures

    Article • Metals and Materials International, July 2019, Springer Science + Business Media

    Professor Hamed Mirzadeh

  103. Micro-mechanisms and precipitation kinetics of delta (δ) phase in Inconel 718 superalloy during aging

    Article • Journal of Alloys and Compounds, July 2019, Elsevier

    Professor Hamed Mirzadeh

  104. Constitutive analysis of wrought Mg-Gd magnesium alloys during hot compression at elevated temperatures

    Article • Journal of Alloys and Compounds, June 2019, Elsevier

    Professor Hamed Mirzadeh

  105. A new intermetallic phase formation in Mg Si Ni magnesium-based in-situ formed alloys

    Article • Vacuum, June 2019, Elsevier

    Professor Hamed Mirzadeh

  106. Tailoring the microstructure and mechanical properties of AISI 316L austenitic stainless steel via cold rolling and reversion annealing

    Article • Materials Science and Engineering A, June 2019, Elsevier

    Professor Hamed Mirzadeh

  107. Texture development during hot deformation of Al/Mg alloy reinforced with ceramic particles

    Article • Journal of Alloys and Compounds, May 2019, Elsevier

    Professor Hamed Mirzadeh

  108. Improved mechanical properties of mild steel via combination of deformation, intercritical annealing, and quench aging

    Article • Materials Science and Engineering A, May 2019, Elsevier

    Professor Hamed Mirzadeh

  109. Effect of Intercritical Annealing Time at Pearlite Dissolution Finish Temperature (Ac1f) on Mechanical Properties of Low-Carbon Dual-Phase Steel

    Article • Journal of Materials Engineering and Performance, April 2019, Springer Science + Business Media

    Professor Hamed Mirzadeh

  110. Homogenization kinetics of a typical nickel-based superalloy

    Article • Journal of Alloys and Compounds, April 2019, Elsevier

    Professor Hamed Mirzadeh

  111. Effect of Si and Ni on microstructure and mechanical properties of in-situ magnesium-based composites in the as-cast and extruded conditions

    Article • Materials Chemistry and Physics, April 2019, Elsevier

    Professor Hamed Mirzadeh

  112. Fine tuning the mechanical properties of dual phase steel via thermomechanical processing of cold rolling and intercritical annealing

    Article • Materials Chemistry and Physics, March 2019, Elsevier

    Professor Hamed Mirzadeh

  113. Synergistic effects of holding time at intercritical annealing temperature and initial microstructure on the mechanical properties of dual phase steel

    Article • Materials Science and Engineering A, March 2019, Elsevier

    Professor Hamed Mirzadeh

  114. Effect of Intercritical Annealing Conditions on Grain Growth Kinetics of Dual Phase Steel

    Article • Metals and Materials International, January 2019, Springer Science + Business Media

    Professor Hamed Mirzadeh

  115. Spheroidization heat treatment and intercritical annealing of low carbon steel

    Article • Journal of Mining and Metallurgy Section B Metallurgy, January 2019, National Library of Serbia

    Professor Hamed Mirzadeh

  116. Tempering of deformed and as-quenched martensite in structural steel

    Article • Journal of Mining and Metallurgy Section B Metallurgy, January 2019, National Library of Serbia

    Professor Hamed Mirzadeh

  117. Enhancement of the microstructure and elevated temperature mechanical properties of as-cast Mg‑Al2Ca‑Mg2Ca in-situ composite by hot extrusion

    Article • Materials Characterization, October 2018, Elsevier

    Professor Hamed Mirzadeh

  118. Effect of microstructural refinement and intercritical annealing time on mechanical properties of high-formability dual phase steel

    Article • Materials Science and Engineering A, October 2018, Elsevier

    Professor Hamed Mirzadeh

  119. Fine-grained dual phase steel via intercritical annealing of cold-rolled martensite

    Article • Vacuum, September 2018, Elsevier

    Professor Hamed Mirzadeh

  120. Microstructural investigation of Al-Mg/B 4 C composite deformed at elevated temperature

    Article • Journal of Alloys and Compounds, September 2018, Elsevier

    Professor Hamed Mirzadeh

  121. Enhancement of mechanical properties of low carbon dual phase steel via natural aging

    Article • Materials Science and Engineering A, September 2018, Elsevier

    Professor Hamed Mirzadeh

  122. Enhancement of work-hardening behavior of dual phase steel by heat treatment

    Article • Materialwissenschaft und Werkstofftechnik, September 2018, Wiley

    Professor Hamed Mirzadeh

  123. Revealing the As-Cast and Homogenized Microstructures of Niobium-Bearing Nickel-Based Superalloy

    Article • International Journal of Metalcasting, August 2018, Springer Science + Business Media

    Professor Hamed Mirzadeh

  124. Developing constitutive equations of flow stress for hot deformation of AZ31 magnesium alloy under compression, torsion, and tension

    Article • International Journal of Material Forming, August 2018, Springer Science + Business Media

    Professor Hamed Mirzadeh

  125. Solidification behavior and Laves phase dissolution during homogenization heat treatment of Inconel 718 superalloy

    Article • Vacuum, August 2018, Elsevier

    Professor Hamed Mirzadeh

  126. Modeling the kinetics of deformation-induced martensitic transformation in AISI 316 metastable austenitic stainless steel

    Article • Vacuum, August 2018, Elsevier

    Professor Hamed Mirzadeh

  127. Mechanical properties and fracture behavior of intercritically annealed AISI 4130 chromoly steel

    Article • Materials Research Express, June 2018, Institute of Physics Publishing

    Professor Hamed Mirzadeh

  128. Processing of fine grained AISI 304L austenitic stainless steel by cold rolling and high-temperature short-term annealing

    Article • Materials Research Express, May 2018, Institute of Physics Publishing

    Professor Hamed Mirzadeh

  129. Mechanical properties of a hot deformed Al-Mg 2 Si in-situ composite

    Article • Materials Science and Engineering A, May 2018, Elsevier

    Professor Hamed Mirzadeh

  130. Enhanced Ductility of a Fine-Grained Mg-Gd-Al-Zn Magnesium Alloy by Hot Extrusion

    Article • Advanced Engineering Materials, April 2018, Wiley

    Professor Hamed Mirzadeh

  131. Refinement of Banded Structure via Thermal Cycling and Its Effects on Mechanical Properties of Dual Phase Steel

    Article • steel research international, March 2018, Wiley

    Professor Hamed Mirzadeh

  132. Microstructural Evolutions During Reversion Annealing of Cold-Rolled AISI 316 Austenitic Stainless Steel

    Article • Metallurgical and Materials Transactions A, March 2018, Springer Science + Business Media

    Professor Hamed Mirzadeh

  133. The Effects of Grain Refinement and Rare Earth Intermetallics on Mechanical Properties of As-Cast and Wrought Magnesium Alloys

    Article • Journal of Materials Engineering and Performance, February 2018, Springer Science + Business Media

    Professor Hamed Mirzadeh

  134. Controlling the mechanical properties of carbon steel by thermomechanical treatment

    Article • January 2018, American Institute of Physics

    Professor Hamed Mirzadeh

  135. Dynamic deformation response of Al-Mg and Al-Mg/B 4 C composite at elevated temperatures

    Article • Materials Science and Engineering A, January 2018, Elsevier

    Professor Hamed Mirzadeh

  136. The effects of primary thermo-mechanical processing routes and intercritical annealing on the mechanical properties of st37 low carbon steel

    Article • Kovove Materialy-Metallic Materials, January 2018, Central Library of the Slovak Academy of Sciences

    Professor Hamed Mirzadeh

  137. Effect of Intercritical Annealing on Mechanical Properties and Work-Hardening Response of High Formability Dual Phase Steel

    Article • steel research international, December 2017, Wiley

    Professor Hamed Mirzadeh

  138. Elucidating the effect of intermetallic compounds on the behavior of Mg–Gd–Al–Zn magnesium alloys at elevated temperatures

    Article • Journal of Materials Research, October 2017, Cambridge University Press

    Professor Hamed Mirzadeh

  139. Unraveling the Initial Microstructure Effects on Mechanical Properties and Work-Hardening Capacity of Dual-Phase Steel

    Article • Metallurgical and Materials Transactions A, August 2017, Springer Science + Business Media

    Professor Hamed Mirzadeh

  140. Enhanced mechanical properties of dual-phase steel by repetitive intercritical annealing

    Article • Canadian Metallurgical Quarterly, August 2017, Taylor & Francis

    Professor Hamed Mirzadeh

  141. Processing of Cu-Fe and Cu-Fe-SiC nanocomposites by mechanical alloying

    Article • Advanced Powder Technology, August 2017, Elsevier

    Professor Hamed Mirzadeh

  142. Modification of Rule of Mixtures for Estimation of the Mechanical Properties of Dual-Phase Steels

    Article • Journal of Materials Engineering and Performance, April 2017, Springer Science + Business Media

    Professor Hamed Mirzadeh

  143. Synergistic effect of Al and Gd on enhancement of mechanical properties of magnesium alloys

    Article • Progress in Natural Science Materials International, April 2017, Elsevier

    Professor Hamed Mirzadeh

  144. Effect of Drawing Strain on Development of Martensitic Transformation and Mechanical Properties in AISI 304L Stainless Steel Wire

    Article • steel research international, January 2017, Wiley

    Professor Hamed Mirzadeh

  145. Toward unraveling the effects of intermetallic compounds on the microstructure and mechanical properties of Mg–Gd–Al–Zn magnesium alloys in the as-cast, homogenized, and extruded conditions

    Article • Materials Science and Engineering A, January 2017, Elsevier

    Professor Hamed Mirzadeh

  146. Tailoring the Microstructure and Mechanical Properties of Dual Phase Steel Based on the Initial Microstructure

    Article • steel research international, December 2016, Wiley

    Professor Hamed Mirzadeh

  147. Modification of As-cast Al-Mg/B4C composite by addition of Zr

    Article • Journal of Alloys and Compounds, November 2016, Elsevier

    Professor Hamed Mirzadeh

  148. A comprehensive approach for quantitative characterization and modeling of composite microstructures

    Article • Applied Mathematical Modelling, October 2016, Elsevier

    Professor Hamed Mirzadeh

  149. Prevention of surface hot shortness, development of banded structure, and mechanical properties of hot rolled Cu-bearing steel

    Article • Engineering Failure Analysis, October 2016, Elsevier

    Professor Hamed Mirzadeh

  150. Toward Unraveling the Importance of Deformed Microstructure before TRIP Heat Treatment in Transformation-Induced Plasticity Steels

    Article • steel research international, September 2016, Wiley

    Professor Hamed Mirzadeh

  151. Elucidating the Effect of Alloying Elements on the Behavior of Austenitic Stainless Steels at Elevated Temperatures

    Article • Metallurgical and Materials Transactions A, September 2016, Springer Science + Business Media

    Professor Hamed Mirzadeh

  152. Toward unraveling the mechanisms responsible for the formation of ultrafine grained microstructure during tempering of cold rolled martensite

    Article • Materials Science and Engineering A, July 2016, Elsevier

    Professor Hamed Mirzadeh

  153. Microstructural Evolutions During Annealing of Plastically Deformed AISI 304 Austenitic Stainless Steel: Martensite Reversion, Grain Refinement, Recrystallization, and Grain Growth

    Article • Metallurgical and Materials Transactions A, June 2016, Springer Science + Business Media

    Professor Hamed Mirzadeh

  154. Physically-based constitutive modeling of NiTi intermetallic compound during hot deformation

    Article • Canadian Metallurgical Quarterly, May 2016, Maney Publishing

    Professor Hamed Mirzadeh

  155. Dynamic recrystallization kinetics in Mg-3Gd-1Zn magnesium alloy during hot deformation

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), March 2016, Carl Hanser Verlag

    Professor Hamed Mirzadeh

  156. A simple Zerilli–Armstrong constitutive equation for modeling and prediction of hot deformation flow stress of steels

    Article • Mechanics of Materials, March 2016, Elsevier

    Professor Hamed Mirzadeh

  157. A Simple Constitutive Model for Prediction of Single-Peak Flow Curves Under Hot Working Conditions

    Article • Journal of Engineering Materials and Technology, January 2016, ASME International

    Professor Hamed Mirzadeh

  158. Quantification of the strengthening effect of rare earth elements during hot deformation of Mg-Gd-Y-Zr magnesium alloy

    Article • Journal of Materials Research and Technology, January 2016, Elsevier

    Professor Hamed Mirzadeh

  159. Physically based constitutive description of OFHC copper at hot working conditions

    Article • Kovove Materialy-Metallic Materials, January 2016, AEPress, s.r.o.

    Professor Hamed Mirzadeh

  160. Mathematical modeling of energy transfer to sheet surface layers and optimization of roll bonding strength

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), December 2015, Carl Hanser Verlag

    Professor Hamed Mirzadeh

  161. Unraveling the Effect of Thermomechanical Treatment on the Dissolution of Delta Ferrite in Austenitic Stainless Steels

    Article • Metallurgical and Materials Transactions A, December 2015, Springer Science + Business Media

    Professor Hamed Mirzadeh

  162. Crystal Plasticity Analysis of Texture Evolution of Pure Aluminum During Processing by a New Severe Plastic Deformation Technique

    Article • Metallurgical and Materials Transactions A, November 2015, Springer Science + Business Media

    Professor Hamed Mirzadeh

  163. Dependency of Deformation Behavior of Retained Austenite in TRIP Steels on Microstructural and Chemical Homogeneity

    Article • Acta Metallurgica Sinica (English Letters), October 2015, Springer Science + Business Media

    Professor Hamed Mirzadeh

  164. Microstructural evolution and grain growth kinetics of GZ31 magnesium alloy

    Article • Materials Characterization, October 2015, Elsevier

    Professor Hamed Mirzadeh

  165. Unraveling the Effect of Homogenization Treatment on Decomposition of Austenite and Mechanical Properties of Low-Alloyed TRIP Steel

    Article • steel research international, September 2015, Wiley

    Professor Hamed Mirzadeh

  166. Deformation of Pure Aluminum Along the Groove Path of ECAP-Conform Process

    Article • Advanced Engineering Materials, September 2015, Wiley

    Professor Hamed Mirzadeh

  167. A simple constitutive model for predicting flow stress of medium carbon microalloyed steel during hot deformation

    Article • Materials & Design (1980-2015), July 2015, Elsevier

    Professor Hamed Mirzadeh

  168. The effect of primary thermo-mechanical treatment on TRIP steel microstructure and mechanical properties

    Article • Materials Science and Engineering A, July 2015, Elsevier

    Professor Hamed Mirzadeh

  169. A Simplified Approach for Developing Constitutive Equations for Modeling and Prediction of Hot Deformation Flow Stress

    Article • Metallurgical and Materials Transactions A, June 2015, Springer Science + Business Media

    Professor Hamed Mirzadeh

  170. Constitutive modeling and prediction of hot deformation flow stress under dynamic recrystallization conditions

    Article • Mechanics of Materials, June 2015, Elsevier

    Professor Hamed Mirzadeh

  171. Hot deformation behavior, dynamic recrystallization, and physically-based constitutive modeling of plain carbon steels

    Article • Materials Science and Engineering A, June 2015, Elsevier

    Professor Hamed Mirzadeh

  172. Hot compression behavior of GZ31 magnesium alloy

    Article • Journal of Alloys and Compounds, May 2015, Elsevier

    Professor Hamed Mirzadeh

  173. Simple physically-based constitutive equations for hot deformation of 2024 and 7075 aluminum alloys

    Article • Transactions of Nonferrous Metals Society of China, May 2015, Elsevier

    Professor Hamed Mirzadeh

  174. Nano/ultrafine grained austenitic stainless steel through the formation and reversion of deformation-induced martensite: Mechanisms, microstructures, mechanical properties, and TRIP effect

    Article • Materials Characterization, May 2015, Elsevier

    Mr Mohammad Shirdel, Professor Hamed Mirzadeh

  175. Rate controlling mechanisms during hot deformation of Mg–3Gd–1Zn magnesium alloy: Dislocation glide and climb, dynamic recrystallization, and mechanical twinning

    Article • Materials & Design (1980-2015), March 2015, Elsevier

    Professor Hamed Mirzadeh

  176. Constitutive behaviors of magnesium and Mg–Zn–Zr alloy during hot deformation

    Article • Materials Chemistry and Physics, February 2015, Elsevier

    Professor Hamed Mirzadeh

  177. Enhanced Mechanical Properties of Microalloyed Austenitic Stainless Steel Produced by Martensite Treatment

    Article • Advanced Engineering Materials, January 2015, Wiley

    Professor Hamed Mirzadeh, Mr Mohammad Shirdel

  178. Constitutive Description of 7075 Aluminum Alloy During Hot Deformation by Apparent and Physically-Based Approaches

    Article • Journal of Materials Engineering and Performance, January 2015, Springer Science + Business Media

    Professor Hamed Mirzadeh

  179. Multi-Axial Incremental Forging and Shearing as a New Severe Plastic Deformation Processing Technique

    Article • Advanced Engineering Materials, January 2015, Wiley

    Professor Hamed Mirzadeh

  180. Quantification of the strengthening effect of reinforcements during hot deformation of aluminum-based composites

    Article • Materials & Design (1980-2015), January 2015, Elsevier

    Professor Hamed Mirzadeh

  181. Estimation of the kinetics of martensitic transformation in austenitic stainless steels by conventional and novel approaches

    Article • Materials Science and Engineering A, January 2015, Elsevier

    Professor Hamed Mirzadeh, Mr Mohammad Shirdel

  182. Prediction of Proper Temperatures for the Hot Stamping Process Based on the Kinetics Models

    Article • Journal of Materials Engineering and Performance, December 2014, Springer Science + Business Media

    Professor Hamed Mirzadeh

  183. Estimating interface bonding strength in clad sheets based on tensile test results

    Article • Materials & Design (1980-2015), December 2014, Elsevier

    Professor Hamed Mirzadeh

  184. Hot deformation and dynamic recrystallization of NiTi intermetallic compound

    Article • Journal of Alloys and Compounds, November 2014, Elsevier

    Professor Hamed Mirzadeh

  185. Abnormal grain growth in AISI 304L stainless steel

    Article • Materials Characterization, November 2014, Elsevier

    Professor Hamed Mirzadeh, Mr Mohammad Shirdel

  186. Constitutive analysis of Mg–Al–Zn magnesium alloys during hot deformation

    Article • Mechanics of Materials, October 2014, Elsevier

    Professor Hamed Mirzadeh

  187. A comparative study on the hot flow stress of Mg–Al–Zn magnesium alloys using a simple physically-based approach

    Article • Journal of Magnesium and Alloys, September 2014, Elsevier

    Professor Hamed Mirzadeh

  188. Cladding of aluminum on AISI 304L stainless steel by cold roll bonding: Mechanism, microstructure, and mechanical properties

    Article • Materials Science and Engineering A, September 2014, Elsevier

    Professor Hamed Mirzadeh

  189. Prediction of Temperatures of Austenite Equilibrium Transformations in Steels During Thermomechanical Processing

    Article • Journal of Materials Engineering and Performance, July 2014, Springer Science + Business Media

    Professor Hamed Mirzadeh, mahmoud Nili Ahmadabadi

  190. Microstructural Evolution During Normal/Abnormal Grain Growth in Austenitic Stainless Steel

    Article • Metallurgical and Materials Transactions A, July 2014, Springer Science + Business Media

    Professor Hamed Mirzadeh, Mr Mohammad Shirdel

  191. Molecular dynamics simulation of stress field around edge dislocations in Aluminum

    Article • Computational Materials Science, March 2014, Elsevier

    Professor Hamed Mirzadeh

  192. Constitutive description of severely deformed metals based on dimensional analysis

    Article • Materials Science and Technology, December 2013, Taylor & Francis

    Professor Hamed Mirzadeh

  193. Optimization of turning process using artificial intelligence technology

    Article • The International Journal of Advanced Manufacturing Technology, October 2013, Springer Science + Business Media

    Professor Hamed Mirzadeh

  194. Hot deformation behavior of austenitic stainless steel for a wide range of initial grain size

    Article • Materials Science and Engineering A, May 2013, Elsevier

    Professor Hamed Mirzadeh

  195. Development of dynamic recrystallization maps based on the initial grain size

    Article • Materials Science and Engineering A, March 2013, Elsevier

    Professor Hamed Mirzadeh

  196. Hot Deformation and Dynamic Recrystallization of 17-4 PH Stainless Steel

    Article • ISIJ International, January 2013, Iron and Steel Institute of Japan

    Professor Hamed Mirzadeh

  197. Modeling the compressive strength of cement mortar nano-composites

    Article • Computers and Concrete, July 2012, Techno-Press

    Professor Hamed Mirzadeh

  198. EBSD study of a hot deformed austenitic stainless steel

    Article • Materials Science and Engineering A, March 2012, Elsevier

    Professor Jose-Maria Cabrera, Professor Hamed Mirzadeh

  199. Constitutive relationships for hot deformation of austenite

    Article • Acta Materialia, September 2011, Elsevier

    Professor Jose-Maria Cabrera, Professor Hamed Mirzadeh

  200. Modeling and Prediction of Hot Deformation Flow Curves

    Article • Metallurgical and Materials Transactions A, July 2011, Springer Science + Business Media

    Professor Jose-Maria Cabrera, Professor Hamed Mirzadeh

  201. Hot deformation behavior of a medium carbon microalloyed steel

    Article • Materials Science and Engineering A, April 2011, Elsevier

    Professor Jose-Maria Cabrera, Professor Hamed Mirzadeh

  202. The rate of dynamic recrystallization in 17-4 PH stainless steel

    Article • Materials & Design (1980-2015), December 2010, Elsevier

    Professor Hamed Mirzadeh

  203. Hot deformation behaviour of precipitation hardening stainless steel

    Article • Materials Science and Technology, April 2010, Taylor & Francis

    Professor Hamed Mirzadeh

  204. Ball milling criteria for producing nano intermetallic compounds

    Article • Materials Science and Technology, March 2010, Taylor & Francis

    Professor Hamed Mirzadeh

  205. Prediction of the critical conditions for initiation of dynamic recrystallization

    Article • Materials & Design (1980-2015), March 2010, Elsevier

    Professor Hamed Mirzadeh

  206. Extrapolation of flow curves at hot working conditions

    Article • Materials Science and Engineering A, March 2010, Elsevier

    Professor Hamed Mirzadeh

  207. Grain growth in nanocrystalline iron and Fe-Al alloys

    Article • Metals and Materials International, February 2010, Springer Science + Business Media

    Professor Hamed Mirzadeh

  208. Flow stress prediction at hot working conditions

    Article • Materials Science and Engineering A, February 2010, Elsevier

    Professor Hamed Mirzadeh

  209. Evaluation of cast-on-strap joints in lead-acid batteries

    Article • Materials Characterization, December 2009, Elsevier

    Professor Hamed Mirzadeh

  210. Flow Curve Analysis of 17-4 PH Stainless Steel under Hot Compression Test

    Article • Metallurgical and Materials Transactions A, October 2009, Springer Science + Business Media

    Professor Hamed Mirzadeh

  211. Aging kinetics of 17-4 PH stainless steel

    Article • Materials Chemistry and Physics, July 2009, Elsevier

    Professor Hamed Mirzadeh

  212. Fluidity of Al–Si semisolid slurries during rheocasting by a novel process

    Article • Journal of Materials Processing Technology, June 2009, Elsevier

    Professor Hamed Mirzadeh

  213. ANN modeling of strain-induced martensite and its applications in metastable austenitic stainless steels

    Article • Journal of Alloys and Compounds, May 2009, Elsevier

    Professor Hamed Mirzadeh

  214. Effects of rheocasting parameters on the microstructure of rheo-centrifuged cast Al–7.1wt%Si alloy

    Article • Journal of Alloys and Compounds, April 2009, Elsevier

    Professor Hamed Mirzadeh

  215. Modeling the reversion of martensite in the cold worked AISI 304 stainless steel by artificial neural networks

    Article • Materials & Design (1980-2015), March 2009, Elsevier

    Professor Hamed Mirzadeh

  216. Correlation between processing parameters and strain-induced martensitic transformation in cold worked AISI 301 stainless steel

    Article • Materials Characterization, November 2008, Elsevier

    Professor Hamed Mirzadeh

  217. Semi-Solid Casting of Al-7wt%Si Alloy in Expendable Molds

    Article • October 2006, CrossRef Test Account

    Professor Hamed Mirzadeh

  218. Semi-Solid Casting of Al-7wt%Si Alloy in Expendable Molds

    Article • Solid State Phenomena, October 2006, Trans Tech Publications

    Professor Hamed Mirzadeh