All Stories

  1. Layer-by-layer assembled graphene oxide/polydiallydimethylammonium chloride composites for hydrogen gas barrier application
  2. Peanut Skin Extract Mediated Synthesis of AuNPs, AgNPs and Au-Ag
  3. N-doped carbon layer coated thermally exfoliated graphene and its capacitive behavior in redox active electrolyte
  4. Nicotinamide adenine dinucleotide assisted direct electrodeposition of gold nanodendrites and its electrochemical applications
  5. Development of high energy density supercapacitor through hydrothermal synthesis of RGO/nano-structured cobalt sulphide composites
  6. Investigation of the capacitive performance of tobacco solution reduced graphene oxide
  7. Facile synthesis of high quality multi-walled carbon nanotubes on novel 3D KIT-6: application in high performance dye-sensitized solar cells
  8. Electrochemical performance of reduced graphene oxide surface-modified with 9-anthracene carboxylic acid
  9. Recent advances in graphene and its metal-oxide hybrid nanostructures for lithium-ion batteries
  10. Nicotinamide adenine dinucleotide assisted shape-controlled synthesis of catalytically active raspberry-like gold nanostructures
  11. Catalyst and doping methods for arc graphene
  12. Effects of acid vapour mediated oxidization on the electrochemical performance of thermally exfoliated graphene
  13. Surface functionalized carbon nanotubes and its effects on the mechanical properties of epoxy based composites at cryogenic temperature
  14. Layer-structured graphene oxide/polyvinyl alcohol nanocomposites: dramatic enhancement of hydrogen gas barrier properties
  15. Reduced graphene oxide (RGO)-supported NiCo2O4nanoparticles: an electrocatalyst for methanol oxidation
  16. Enhanced properties of aryl diazonium salt-functionalized graphene/poly(vinyl alcohol) composites
  17. Synthesis, magnetic and Mössbauer spectroscopic studies of Cr doped lithium ferrite nanoparticles
  18. Simultaneous reduction, exfoliation, and nitrogen doping of graphene oxide via a hydrothermal reaction for energy storage electrode materials
  19. Preparation and characterization of self-assembled layer by layer NiCo2O4–reduced graphene oxide nanocomposite with improved electrocatalytic properties
  20. Covalent surface modification of chemically derived graphene and its application as supercapacitor electrode material
  21. 7,7,8,8-Tetracyanoquinodimethane-assisted one-step electrochemical exfoliation of graphite and its performance as an electrode material
  22. Iodide-mediated room temperature reduction of graphene oxide: a rapid chemical route for the synthesis of a bifunctional electrocatalyst
  23. Enhanced mechanical properties of a multiwall carbon nanotube attached pre-stitched graphene oxide filled linear low density polyethylene composite
  24. Effects of surface-modified silica nanoparticles attached graphene oxide using isocyanate-terminated flexible polymer chains on the mechanical properties of epoxy composites
  25. Hydrothermal synthesis of Fe3O4/RGO composites and investigation of electrochemical performances for energy storage applications
  26. Synthesis and properties of iodo functionalized graphene oxide/polyimide nanocomposites
  27. Effects of ionic liquid-functionalized mesoporous silica on the proton conductivity of acid-doped poly(2,5-benzimidazole) composite membranes for high-temperature fuel cells
  28. Polymer-Layered Silicate Nanocomposite Membranes for Fuel Cell Application
  29. Analysis of heat-treated bovine cortical bone by thermal gravimetric and nanoindentation
  30. Polyvinyl alcohol/carbon coated zinc oxide nanocomposites: Electrical, optical, structural and morphological characteristics
  31. Electrostatically assembled layer-by-layer composites containing graphene oxide for enhanced hydrogen gas barrier application
  32. Effects of dual component microcapsules of resin and curing agent on the self-healing efficiency of epoxy
  33. Preparation of sulfonated poly(ether–ether–ketone) functionalized ternary graphene/AuNPs/chitosan nanocomposite for efficient glucose biosensor
  34. One-step electrochemical synthesis of 6-amino-4-hydroxy-2-napthalene-sulfonic acid functionalized graphene for green energy storage electrode materials
  35. Synthesis and Characterization of SPEEK/Layered Double Hydroxide Polymer Nanocomposite for Fuel Cell Applications
  36. Tin-Powder Mediated Facile Route for the Reduction of Graphene Oxide
  37. A Facile One-Step Hydrothermal Synthesis of Graphene/CeO2 Nanocomposite and its Catalytic Properties
  38. Effects of hybrid carbon fillers of polymer composite bipolar plates on the performance of direct methanol fuel cells
  39. Electrochemically Preparation of Functionalized Graphene Using Sodium Dodecyl Benzene Sulfonate (SDBS)
  40. Effects of various surfactants on the dispersion stability and electrical conductivity of surface modified graphene
  41. Effects of processing conditions of poly(methylmethacrylate) encapsulated liquid curing agent on the properties of self-healing composites
  42. Synergistic effects of oxidized CNTs and reactive oligomer on the fracture toughness and mechanical properties of epoxy
  43. Mechanically Strong and Multifunctional Polyimide Nanocomposites Using Amimophenyl Functionalized Graphene Nanosheets
  44. Synthesis and characterization of novel thiophene-based polybenzimidazole membrane for high-temperature fuel cells
  45. Defect healing of reduced graphene oxide via intramolecular cross-dehydrogenative coupling
  46. Effects of covalent surface modifications on the electrical and electrochemical properties of graphene using sodium 4-aminoazobenzene-4′-sulfonate
  47. Enhanced mechanical properties of silanized silica nanoparticle attached graphene oxide/epoxy composites
  48. Polyamide 6/carbon black/molybdenum disulphide composites: Friction, wear and morphological characteristics
  49. Sintering behavior and mechanical properties of HA-X% mol 3YSZ composites sintered by high frequency induction heated sintering
  50. Efficient reduction of graphene oxide using Tin-powder and its electrochemical performances for use as an energy storage electrode material
  51. Characterizations of in situ grown ceria nanoparticles on reduced graphene oxide as a catalyst for the electrooxidation of hydrazine
  52. Simultaneous reduction, functionalization and stitching of graphene oxide with ethylenediamine for composites application
  53. Recent advances in the efficient reduction of graphene oxide and its application as energy storage electrode materials
  54. In situ synthesis of the reduced graphene oxide–polyethyleneimine composite and its gas barrier properties
  55. Effects of reduction and polystyrene sulfate functionalization on the capacitive behaviour of thermally exfoliated graphene
  56. Effects of sodium hydroxide on the yield and electrochemical performance of sulfonated poly(ether-ether-ketone) functionalized graphene
  57. Micro-crack behavior of carbon fiber reinforced thermoplastic modified epoxy composites for cryogenic applications
  58. Microstructure, thermal, physico–mechanical and tribological characteristics of molybdenum disulphide‐filled polyamide 66/carbon black composites
  59. Critical factors on manufacturing processes of natural fibre composites
  60. Interfacial bonding and degumming effects on silk fibre/polymer biocomposites
  61. Poly(2,5-benzimidazole)–silica nanocomposite membranes for high temperature proton exchange membrane fuel cell
  62. Chemical functionalization of graphene and its applications
  63. Facile Method for the Preparation of Water Dispersible Graphene using Sulfonated Poly(ether–ether–ketone) and Its Application as Energy Storage Materials
  64. Material selection windows for hybrid carbons/poly(phenylene sulfide) composite for bipolar plates of fuel cell
  65. Silicate-based polymer-nanocomposite membranes for polymer electrolyte membrane fuel cells
  66. In Situ Synthesis of Thermochemically Reduced Graphene Oxide Conducting Nanocomposites
  67. Tunable electrical conductivity and dielectric properties of triglycine sulfate-polypyrrole composite
  68. Studies on Erosive Wear Behavior of UHMWPE-Filled Aramid–Epoxy Hybrid Composites
  69. A green approach for the reduction of graphene oxide by wild carrot root
  70. Simultaneous bio-functionalization and reduction of graphene oxide by baker's yeast
  71. Effect of peptizer on the properties of Nafion–Laponite clay nanocomposite membranes for polymer electrolyte membrane fuel cells
  72. A macroscopically oriented lyotropic chromonic liquid crystalline nanofiber mat embedding self-assembled Sunset-Yellow FCF nanocolumns
  73. Electrochemically exfoliated graphene using 9-anthracene carboxylic acid for supercapacitor application
  74. Carbon-based nanostructured materials and their composites as supercapacitor electrodes
  75. Protic ionic liquid-functionalized mesoporous silica-based hybrid membranes for proton exchange membrane fuel cells
  76. Dual role of glycine as a chemical functionalizer and a reducing agent in the preparation of graphene: an environmentally friendly method
  77. Preparation and Characterization of High Performance LLDPE/Graphene Nanocomposites
  78. Assessing Heat-Treatment Effects on Bovine Cortical Bones by Nanoindentation
  79. Nafion-Peptized Laponite Clay Nanocomposite Membrane for PEMFC
  80. Characterization and properties of in situ emulsion polymerized poly(methyl methacrylate)/graphene nanocomposites
  81. Effect of reactive poly(ethylene glycol) flexible chains on curing kinetics and impact properties of bisphenol-a glycidyl ether epoxy
  82. Preparation of non-covalently functionalized graphene using 9-anthracene carboxylic acid
  83. Efficient synthesis of graphene sheets using pyrrole as a reducing agent
  84. Electrochemical performance of a graphene-polypyrrole nanocomposite as a supercapacitor electrode
  85. Recent advances in graphene-based biosensors
  86. Preparation of water-dispersible graphene by facile surface modification of graphite oxide
  87. Study of the Characteristics of Hydrogen-Gas Filling Process of Ultra-Light Composite Tanks for Fuel-Cell Vehicles
  88. Electrochemical performance of a graphene–polypyrrole nanocomposite as a supercapacitor electrode
  89. Polymer membranes for high temperature proton exchange membrane fuel cell: Recent advances and challenges
  90. Aniline- and N,N-dimethylformamide-assisted processing route for graphite nanoplates: intercalation and exfoliation pathway
  91. Macromol. Chem. Phys. 9/2011
  92. Increasing Cryogenic Strength of Epoxy Resin Modified by Reactive Macroglycol
  93. Preparation and Properties of Polydicyclopentadiene/MMt Nanocomposites Using Supported Tungsten Catalyst
  94. Preparation of functionalized graphene/linear low density polyethylene composites by a solution mixing method
  95. New hyperbranched polymers for membranes of high-temperature polymer electrolyte membrane fuel cells: Determination of the crystal structure and free-volume size
  96. Large‐Deformation Behavior of Honeycomb‐Structured Polymer Sheets as a Function of Polar Angle
  97. Three-dimensional actuators transformed from the programmed two-dimensional structures via bending, twisting and folding mechanisms
  98. Temperature effects on the fracture behavior and tensile properties of silane-treated clay/epoxy nanocomposites
  99. Lipase-catalyzed synthesis and characterization of biodegradable polyester containing l-malic acid unit in solvent system
  100. Recent advances in graphene based polymer composites
  101. In-situ synthesis and characterization of electrically conductive polypyrrole/graphene nanocomposites
  102. Heating fluid from aqueous dispersion of metallic to semiconducting particles
  103. Effects of moisture absorption and surface modification using 3-aminopropyltriethoxysilane on the tensile and fracture characteristics of MWCNT/epoxy nanocomposites
  104. Synergy effects of hybrid carbon system on properties of composite bipolar plates for fuel cells
  105. Erratum: Synergy Effect of Hybrid Fillers on the Positive Temperature Coefficient Behavior of Polypropylene/Ultra-High Molecular Weight Polyethylene Composites
  106. Preparation of Primary-Amine Functionalized Poly(2,5-benzimidazole) Membrane for Fuel Cells
  107. Effect of Carbon Fillers on the Performance of a Composite Bipolar Plate for Fuel Cells
  108. Fibre-Fibre Hybrid Composites for Aerospace Applications
  109. Electrical, Thermal and Positron Lifetime Spectroscopy Studies on Multi-Walled Carbon Nanotube Reinforced High Density Polyethylene/Carbon Black Nanocomposites
  110. Preparation and Characterization of Functionalized Graphene/Linear Low Density Polyethylene Nanocomposites
  111. Structure-Property Relationship of Castor Oil Based Chain Extended Polyurethane/Starch Biocomposites
  112. Synthesis and Characterization of Silk Fibre Reinforced Cepu Composites
  113. Curing Kinetics and Rheology of Diglycidyiether of Bisphenol-A Modified by Poly(ethylene glycol) Flexible Chains
  114. One-Step Process for the Exfoliation and Surface Modification of Graphene by Electrochemical Method
  115. Investigations on the Influence of Molybdenum Disulphide on Tensile and Dry Sliding Wear Characteristics of Nylon 66/Carbon Black Composites
  116. Solid Particle Erosion of UHMWPE Filled Aramid Fabric-Epoxy Hybrid Composites
  117. Measurement of Bovine Bone Properties through Surface Indentation Technique
  118. Hyperbranched poly(benzimidazole-co-benzene) with honeycomb structure as a membrane for high-temperature proton-exchange membrane fuel cells
  119. Synthesis of water soluble sulfonated polyaniline and determination of crystal structure
  120. Synergy effect of hybrid fillers on the positive temperature coefficient behavior of polypropylene/ultra-high molecular weight polyethylene composites
  121. Wear properties of 3-aminopropyltriethoxysilane-functionalized carbon nanotubes reinforced ultra high molecular weight polyethylene nanocomposites
  122. Effect of surface treatment with potassium persulfate on dispersion stability of multi-walled carbon nanotubes
  123. A new self-cross-linked, net-structured, proton conducting polymer membrane for high temperature proton exchange membrane fuel cells
  124. Effects of the surface treatment on the properties of polyaniline coated carbon nanotubes/epoxy composites
  125. Improved mechanical and swelling behavior of the composite hydrogels prepared by ionic monomer and acid-activated Laponite
  126. Effects of reactive gas on shear and fracture behaviors of plasma-treated polyethylene/steel joints
  127. Synthesis of higher soluble nanostructured polyaniline by vapor-phase polymerization and determination of its crystal structure
  128. Columnar Structures from Asymmetrically Tapered Biphenylamide
  129. Effect of carbon fillers on properties of polymer composite bipolar plates of fuel cells
  130. Preparation of nanosize polyaniline by solid-state polymerization and determination of crystal structure
  131. Electroresponsive Property of Novel Poly(acrylate- acryloyloxyethyl trimethyl ammonium chloride)/Clay Nanocomposite Hydrogels
  132. Positive Temperature Coefficient Behavior of HDPE/EVA Blends Filled with Carbon Black
  133. Progress in preparation, processing and applications of polyaniline
  134. Effect of oxygen plasma treatment on the bonding strength of CFRP/aluminum foam composite
  135. Effect of chemical functionalization of multi-walled carbon nanotubes with 3-aminopropyltriethoxysilane on mechanical and morphological properties of epoxy nanocomposites
  136. Investigation of multi-walled carbon nanotube-reinforced high-density polyethylene/carbon black nanocomposites using electrical, DSC and positron lifetime spectroscopy techniques
  137. Swelling behavior of polyacrylamide/laponite clay nanocomposite hydrogels: pH-sensitive property
  138. Positive temperature coefficient characteristic and structure of graphite nanofibers reinforced high density polyethylene/carbon black nanocomposites
  139. Poly(acrylamide/laponite) nanocomposite hydrogels: Swelling and cationic dye adsorption properties
  140. Synthesis and characterization of polyaniline-multiwalled carbon nanotube nanocomposites in the presence of sodium dodecyl sulfate
  141. Sodium alginate and its blends with starch: Thermal and morphological properties
  142. Preparation of polyaniline nanostructures using sodium dodecylsulphate
  143. Mechanical and three-body abrasive wear behaviour of PMMA/TPU blends
  144. Dielectric properties of carbon black: SBR composites
  145. Novel PAAm/Laponite clay nanocomposite hydrogels with improved cationic dye adsorption behavior
  146. Morphology, thermal stability and rheology of poly(propylene carbonate)/organoclay nanocomposites with different pillaring agents
  147. Miscibility Behaviour of Polyethylene Oxide/Hydroxypropyl Methyl Cellulose Blends
  148. Positive Temperature Coefficient Behavior of the Graphite Nanofibre and Carbon Black Filled High-Density Polyethylene Hybrid Composites
  149. Swelling Behavior of Poly(Acrylamide) Nanoclay Composite Hydrogels
  150. Effect of Polyaniline Functionalized Carbon Nanotubes Addition on the Positive Temperature Coefficient Behavior of Carbon Black/High-Density Polyethylene Nanocomposites
  151. Polyaniline-multiwalled carbon nanotube composites: Characterization by WAXS and TGA
  152. Melting and crystallization behaviors of compatibilized poly(trimethylene terephthalate)/acrylonitrile–butadiene–styrene blends
  153. Polycarbonate/Short Glass Fiber Reinforced Composites — Physico-mechanical, Morphological and FEM Analysis
  154. Miscibility and compatibilization of poly(trimethylene terephthalate)/acrylonitrile–butadiene–styrene blends
  155. Proton conducting membranes based on sulfonated poly(ether ether ketone)/TiO2 nanocomposites for a direct methanol fuel cell
  156. Rheology and mechanical properties enhancement of polymerization-filled polyethylene-based composites prepared with kaolin-supported metallocene catalyst
  157. Preparation Methods and Properties of Polypropylene/Layered Silicate Nanocomposites
  158. Partial delamination of the organo-montmorillonite with surfactant containing hydroxyl groups in maleated poly(propylene carbonate)
  159. Effects of the addition of multi-walled carbon nanotubes on the positive temperature coefficient characteristics of carbon-black-filled high-density polyethylene nanocomposites
  160. Compatible Polyethylene/Polyvinyl Chloride Particle Hybrids Prepared byin‐situPolymerization
  161. Spectral characterization of apatite formation on poly(2-hydroxyethylmethacrylate)–TiO2 nanocomposite film prepared by sol–gel process
  162. Preparation and characterization of layered silicate/glass fiber/epoxy hybrid nanocomposites via vacuum-assisted resin transfer molding (VARTM)
  163. Synergistic Enhancement on the Conductivity of Polyaniline via Copolymerization and Carbon Nanotubes
  164. Effect of MnO addition on structure and electrical properties of (Na0.5Bi0.5)0.94Ba0.06TiO3 ceramics prepared by citrate method
  165. Properties of polyethylene-layered silicate nanocomposites prepared by melt intercalation with a PP-g-MA compatibilizer
  166. Polypropylene–clay nanocomposites prepared by in situ grafting-intercalating in melt
  167. Preparation and characterization of a polyimide nanofoam through grafting of labile poly(propylene glycol) oligomer
  168. Preparation and properties of montmorillonite-based polyimide nanocomposites
  169. Intercalation behavior of polyimide/organoclay nanocomposites during thermal imidization
  170. Preparing PP/clay nanocomposites using a swelling agent
  171. Influence of sintering temperature on microstructure and mixed electronic–ionic conduction properties of perovskite-type La0.6Sr0.4Co0.8Fe0.2O3 ceramics
  172. Adhesion strength and fracture behavior between carbon black-filled rubber sheets
  173. 10.4028/0-87849-378-6.234
  174. 10.4028/0-87849-378-6.230
  175. 10.4028/0-87849-378-6.226