All Stories

  1. Low-Bandgap Small Molecules as Non-Fullerene Electron Acceptors Composed of Benzothiadiazole and Diketopyrrolopyrrole for All Organic Solar Cells
  2. Graphene-based electrodes for flexible electronics
  3. A Small Molecule Composed of Dithienopyran and Diketopyrrolopyrrole as Versatile Electron Donor Compatible with Both Fullerene and Nonfullerene Electron Acceptors for High Performance Organic Solar Cells
  4. Highly Crystalline Low Band Gap Polymer Based on Thieno[3,4- c ]pyrrole-4,6-dione for High-Performance Polymer Solar Cells with a >400 nm Thick Active Layer
  5. Effect of fluorine substitution on photovoltaic performance of DPP-based copolymer
  6. Fluoro-Substituted n-Type Conjugated Polymers for Additive-Free All-Polymer Bulk Heterojunction Solar Cells with High Power Conversion Efficiency of 6.71%
  7. Anthracene-Based Medium Bandgap Conjugated Polymers for High Performance Polymer Solar Cells Exceeding 8% PCE Without Additive and Annealing Process
  8. A low band-gap copolymer composed of thienyl substituted anthracene and diketopyrrolopyrrole compatible with multiple electron acceptors for high efficiency polymer solar cells
  9. Fluorination on both D and A units in D–A type conjugated copolymers based on difluorobithiophene and benzothiadiazole for highly efficient polymer solar cells
  10. Performance enhancement of planar heterojunction perovskite solar cells by n-doping of the electron transporting layer
  11. Two different mechanisms of CH3NH3PbI3film formation in one-step deposition and its effect on photovoltaic properties of OPV-type perovskite solar cells
  12. Small Molecules Based on Thieno[3,4- c ]pyrrole-4,6-dione for High Open-Circuit Voltage ( V OC ) Organic Photovoltaics: Effect of Different Positions of Alkyl Substitution on Molecular Packing and Photovoltaic Performance
  13. Enhanced performance of polymer solar cells with PSSA−g−PANI/Graphene oxide composite as hole transport layer
  14. Comparison of Two D−A Type Polymers with Each Being Fluorinated on D and A Unit for High Performance Solar Cells
  15. Fluorination of Polythiophene Derivatives for High Performance Organic Photovoltaics
  16. π-Extended low bandgap polymer based on isoindigo and thienylvinylene for high performance polymer solar cells
  17. Synthesis of 6H-benzo[c]chromene as a new electron-rich building block of conjugated alternating copolymers and its application to polymer solar cells
  18. The effect of different chalcogenophenes in isoindigo-based conjugated copolymers on photovoltaic properties
  19. Synthesis of graphene nanoribbons with various widths and its application to thin-film transistor
  20. Charge-Transport Tuning of Solution-Processable Graphene Nanoribbons by Substitutional Nitrogen Doping
  21. A strategy to enhance both VOC and JSC of A–D–A type small molecules based on diketopyrrolopyrrole for high efficient organic solar cells
  22. A Fluorinated Phenylene Unit as a Building Block for High-Performance n-Type Semiconducting Polymer
  23. Synthesis and Characterization of Low-bandgap Poly(oligothiophene-alt-benzothiadiazole)s for Photovoltaic Application
  24. Semi-crystalline random conjugated copolymers with panchromatic absorption for highly efficient polymer solar cells
  25. Synthesis of pyridine-capped diketopyrrolopyrrole and its use as a building block of low band-gap polymers for efficient polymer solar cells
  26. Direct exfoliation of graphite using a non-ionic polymer surfactant for fabrication of transparent and conductive graphene films
  27. Diketopyrrolopyrrole-based small molecules with simple structure for high VOC organic photovoltaics
  28. Facile Method to Functionalize Graphene Oxide and Its Application to Poly(ethylene terephthalate)/Graphene Composite
  29. Synthesis of thieno[3,4-d]thiazole-based conjugated polymers and HOMO level tuning for high VOC photovoltaic cell
  30. Fine-Tuning of Molecular Energy Level of Alternating Copolymers On the basis of [1,2,5]Thiadiazolo[3,4- g ]quinoxaline Derivatives for Polymer Photovoltaics
  31. On the morphology of polymer-based photovoltaics
  32. Charge transport in amorphous low bandgap conjugated polymer/fullerene films
  33. A low band-gap polymer based on unsubstituted benzo[1,2-b:4,5-b′]dithiophene for high performance organic photovoltaics
  34. A high mobility conjugated polymer based on dithienothiophene and diketopyrrolopyrrole for organic photovoltaics
  35. Degradation and stability of polymer-based solar cells
  36. Synthesis of fluorinated amphiphilic triblock copolymer and its application in high temperature PEM fuel cells
  37. Synthesis of a low bandgap polymer based on a thiadiazolo-indolo[3,2-b]carbazole derivative for enhancement of open circuit voltage of polymer solar cells
  38. Bilayer order in a polycarbazole-conjugated polymer
  39. 수용성 폴리아닐린/탄소나노튜브 복합재료의 제조 및 물성분석
  40. Effect of the vertical composition gradient of active layer on the performance of bulk-heterojunction organic photovoltaic cell
  41. Fabrication of Annealing-Free High Efficiency and Large Area Polymer Solar Cells by Roller Painting Process
  42. Effect of Nanoscale SubPc Interfacial Layer on the Performance of Inverted Polymer Solar Cells Based on P3HT/PC71BM
  43. Synthesis and photophysical properties of soluble low-bandgap thienothiophene polymers with various alkyl side-chain lengths
  44. Highly Ordered Poly(3-hexylthiophene) Rod Polymers via Block Copolymer Self-Assembly
  45. A computational study on optimal design for organic tandem solar cells
  46. Enhanced Performance and Air Stability of Polymer Solar Cells by Formation of a Self-Assembled Buffer Layer from Fullerene-End-Capped Poly(ethylene glycol)
  47. Non-destructive functionalization of multi-walled carbon nanotubes with naphthalene-containing polymer for high performance Nylon66/multi-walled carbon nanotube composites
  48. Supramolecular Assembly of End-Functionalized Polymer Mixtures Confined in Nanospheres
  49. One-pot synthesis of hybrid TiO2–polyaniline nanoparticles by self-catalyzed hydroamination and oxidative polymerization from TiO2–methacrylic acid nanoparticles
  50. Efficiency enhancement of P3HT/PCBM bulk heterojunction solar cells by attaching zinc phthalocyanine to the chain-end of P3HT
  51. Enhanced device performance of polymer solar cells by planarization of quinoxaline derivative in a low-bandgap polymer
  52. Fabrication of Highly Conductive and Transparent Thin Films from Single-Walled Carbon Nanotubes Using a New Non-ionic Surfactant via Spin Coating
  53. Noncovalent functionalization of multiwalled carbon nanotubes using graft copolymer with naphthalene and its application as a reinforcing filler for poly(styrene-co-acrylonitrile)
  54. Synthesis of Nonfluorinated Amphiphilic Rod−Coil Block Copolymer and Its Application to Proton Exchange Membrane
  55. Annealing-Free High Efficiency and Large Area Polymer Solar Cells Fabricated by a Roller Painting Process
  56. Optimization of thickness and morphology of active layer for high performance of bulk-heterojunction organic solar cells
  57. Synthesis and photovoltaic properties of low-bandgap alternating copolymers consisting of 3-hexylthiophene and [1,2,5]thiadiazolo[3,4-g]quinoxaline derivatives
  58. Secondary Water Pore Formation for Proton Transport in a ClC Exchanger Revealed by an Atomistic Molecular-Dynamics Simulation
  59. ChemInform Abstract: Infiltration of Water Molecules into the Oseltamivir-Binding Site of H274Y Neuraminidase Mutant Causes Resistance to Oseltamivir.
  60. A New Polymeric pH Sensor Based on Photophysical Property of Gold Nanoparticle and pH Sensitivity of Poly(sulfadimethoxine methacrylate)
  61. Morphology control of a polythiophene–fullerene bulk heterojunction for enhancement of the high-temperature stability of solar cell performance by a new donor–acceptor diblock copolymer
  62. Computational design of novel, high-affinity neuraminidase inhibitors for H5N1 avian influenza virus
  63. Multi-walled carbon nanotubes covalently attached with poly(3-hexylthiophene) for enhancement of field-effect mobility of poly(3-hexylthiophene)/multi-walled carbon nanotube composites
  64. High-Efficiency Polymer Solar Cells with Water-Soluble and Self-Doped Conducting Polyaniline Graft Copolymer as Hole Transport Layer
  65. Synthesis of C60-end capped P3HT and its application for high performance of P3HT/PCBM bulk heterojunction solar cells
  66. Infiltration of Water Molecules into the Oseltamivir-Binding Site of H274Y Neuraminidase Mutant Causes Resistance to Oseltamivir
  67. Synthesis of poly(3-hexylthiophene)-graft-poly(t-butyl acrylate-co-acrylic acid) and its role of compatibilizer for enhancement of mechanical and electrical properties of Nylon 66/multi-walled carbon nanotube composites
  68. Chemical structure–stereospecificity relationship of internal donor in heterogeneous Ziegler–Natta catalyst for propylene polymerization by DFT and MM calculations
  69. Synthesis of Polymeric Temperature Sensor Based on Photophysical Property of Fullerene and Thermal Sensitivity of Poly( N -isopropylacrylamide)
  70. A strategy for enhancement of mechanical and electrical properties of polycarbonate/multi-walled carbon nanotube composites
  71. Preparation of new proton exchange membrane based on self-assembly of Poly(styrene-co-styrene sulfonic acid)-b-poly(methyl methacrylate)/Poly(vinylidene fluoride) blend
  72. Effect of Lewis acid on the structure of a diiron dithiolate complex based on the active site of [FeFe]-hydrogenase assessed by density functional theory
  73. Synthesis and photophysical property of well-defined donor–acceptor diblock copolymer based on regioregular poly(3-hexylthiophene) and fullerene
  74. Chloride ion conduction without water coordination in the pore of ClC protein
  75. Polythiophene-graft-PMMA as a dispersing agent for multi-walled carbon nanotubes in organic solvent
  76. Optimization of molecular structure of polythiophene-graft-PMMA for effective compatibilization of SAN/MWCNT composite with superior mechanical properties
  77. A New pH Sensor Using the Fluorescence Quenching of Carbon Nanotubes
  78. A fluorescence resonance energy transfer probe for sensing pH in aqueous solution
  79. Polymorphism and β-form structure of poly(octamethylene 2,6-naphthalate)
  80. A soluble self-doped conducting polyaniline graft copolymer as a hole injection layer in polymer light-emitting diodes
  81. Theoretical investigation on the model active site for isotactic polypropylene in heterogeneous Ziegler–Natta catalyst: A density functional study
  82. Ion exclusion mechanism in aquaporin at an atomistic level
  83. Synthesis of Polythiophene-graft-PMMA and Its Role as Compatibilizer for Poly(styrene-co-acrylonitrile)/MWCNT Nanocomposites
  84. Aqueous suspension of carbon nanotubes via non-covalent functionalization with oligothiophene-terminated poly(ethylene glycol)
  85. Effect of alkyl chain length on thermochromism of novel nitro compounds
  86. Synthesis of thermally stable organosilicate for exfoliated poly(ethylene terephthalate) nanocomposite with superior tensile properties
  87. Thermochromism of a novel organic compound in the solid state via crystal-to-crystal transformation
  88. Synthesis of a PEGylated Polymeric pH Sensor and Its pH Sensitivity by Fluorescence Resonance Energy Transfer
  89. Synthesis and physical properties of pH-sensitive semi-IPN hydrogels based on poly(dimethylaminoethyl methacrylate-co-PEG dimethacrylate) and poly(acrylic acid)
  90. Segmental motions and associated dynamic mechanical thermal properties of a series of copolymers based on poly(hexamethylene terephthalate) and poly(1,4-cyclohexylenedimethylene terephthalate)
  91. Electrostatic Energy Calculation on the pH-Induced Conformational Change of Influenza Virus Hemagglutinin
  92. Density Functional Study on the Regioselectivity of Styrene Polymerization with an ansa-Metallocene Catalyst
  93. pH-Induced Helix−Coil Transition of Amphipathic Polypeptide and Its Association with the Lipid Bilayer:  Electrostatic Energy Calculation
  94. Design and Synthesis of a New pH Sensitive Polymeric Sensor Using Fluorescence Resonance Energy Transfer
  95. pH-induced Micelle Formation of Poly(histidine-co-phenylalanine)-block-Poly(ethylene glycol) in Aqueous Media
  96. Fully exfoliated nanocomposite from polypyrrole graft copolymer/clay
  97. Preparation and characterization of electroconductive poly(thiophene-co-pyrrolylundecanoic acid) Langmuir–Blodgett films
  98. Drug release behavior of poly(ε-caprolactone)-b-Poly(acrylic acid) Shell Crosslinked Micelles below the Critical Micelle Concentration
  99. Effect of uniaxial drawing on surface chain structure and surface tension of poly(trimethylene terephthalate) film
  100. Complex formation between plasmid DNA and self-aggregates of deoxycholic acid-modified chitosan
  101. Preparation of hydrogel nanoparticles by atom transfer radical polymerization of N-isopropylacrylamide in aqueous media using PEG macro-initiator
  102. Constrained Dewetting of Polymers Grafted onto a Nonadsorbing Surface in Poor Solvents:  From Pancake Micelles to the Holey Layer
  103. A Water-Soluble and Self-Doped Conducting Polypyrrole Graft Copolymer
  104. Effect of Solvent Polarity on the Initiation and the Propagation of Ethylene Polymerization with Constrained Geometry Catalyst/MAO Catalytic System:  A Density Functional Study with the Conductor-Like Screening Model
  105. Exfoliated Nanocomposite from Polyaniline Graft Copolymer/Clay
  106. Comparison between Denaturant- and Temperature-Induced Unfolding Pathways of Protein:  A Lattice Monte Carlo Simulation
  107. Cocrystallization of poly(1,4-cyclohexylenedimethylene terephthalate-co-hexamethylene terephthalate) copolymers
  108. Micellization behavior of star-block copolymers in a selective solvent: A Brownian dynamics simulation approach
  109. Synthesis, structure, and thermal property of poly(trimethylene terephthalate-co-trimethylene 2,6-naphthalate) copolymers
  110. Synthesis and Micellization of Star-Shaped Poly(ethylene glycol)-block-Poly(ɛ-caprolactone)
  111. A Density Functional Study on the Stereoselectivity of Styrene Polymerization with a nsa -Metallocene Catalyst
  112. The effect of flexible chain length on thermal and mechanical properties of poly(m-methylene 2,6-naphthalate)s
  113. Theory on Phase Behavior of Triblocklike Supramolecules Formed from Reversibly Associating End-functionalized Polymer Blends
  114. Plastic Deformation of Bisphenol-A-Polycarbonate
  115. Crystal structure identification of poly(trimethylene 2,6-naphthalate) β-form crystal by X-ray diffraction and molecular modeling
  116. Wirelike Micelle Formed by a T-Shaped Graft Copolymer with a Rigid Backbone
  117. Micellization behavior of π-shaped copolymers in a selective solvent: A Brownian dynamics simulation approach
  118. Similarity of Force-Induced Unfolding of Apomyoglobin to Its Chemical-Induced Unfolding: An Atomistic Molecular Dynamics Simulation Approach
  119. Preparation of SAN/silicate nanocomposites using PMMA as a compatibilizer
  120. Density functional study of the insertion mechanism for ethylene-styrene copolymerization with constrained geometry catalysts
  121. Crystal Structure Determination of Poly(1,4- trans -cylcohexylenedimethylene 2,6-naphthalate) by X-ray Diffraction and Molecular Modeling
  122. Synthesis and Crystallization Behavior of Poly( m -methylene 2,6-naphthalate- c o -1,4-cyclohexylenedimethylene 2,6-naphthalate) Copolymers
  123. Effect of chain topology of block copolymer on micellization: Ring versus linear block copolymer
  124. Melting and crystallization behavior of poly(trimethylene 2,6-naphthalate)
  125. Structural characterization and surface modification of sulfonated polystyrene–(ethylene–butylene)–styrene triblock proton exchange membranes
  126. A molecular dynamics simulation on the self-assembly of ABC triblock copolymers. 3. Effects of block composition in asymmetric triblock copolymers
  127. A novel water-soluble and self-doped conducting polyaniline graft copolymerElectronic supplementary information (ESI) available: schematic diagrams; XPS and FTIR spectra; GPC profile. See http://www.rsc.org/suppdata/cc/b3/b309346h/
  128. Preparation of polystyrene/polyaniline blends by in situ polymerization technique and their morphology and electrical property
  129. Synthesis and isodimorphic cocrystallization behavior of poly(1,4-cyclohexylenedimethylene terephthalate-co-1,4-cyclohexylenedimethylene 2,6-naphthalate) copolymers
  130. Phase behavior of ternary blends of diblock copolymer with homopolymer blends
  131. Crystal structure of poly(pentamethylene 2,6-naphthalate)
  132. A Monte Carlo simulation for the micellization of ABA- and BAB-type triblock copolymers in a selective solvent. II. Effects of the block composition
  133. Effects of Core Moieties on the Kinetics and Microstructures of Hyperbranched Polymers. Theoretical and Off-Lattice Monte Carlo Simulation Approach
  134. Morphologies of Binary AB/AC Diblock Copolymer Blends
  135. Effect of matrix viscosity on clay dispersion in preparation of polymer/organoclay nanocomposites
  136. Cocrystallization behavior of poly(hexamethylene terephthalate-co-hexamethylene 2,6-naphthalate) random copolymers
  137. Crystallization-induced sequential reordering in poly(trimethylene terephthalate)/polycarbonate blends
  138. Conformational Analysis in ABA Triblock Melts by Monte Carlo Simulation
  139. Effects of Shear on Melt Exfoliation of Clay in Preparation of Nylon 6/Organoclay Nanocomposites
  140. A molecular dynamics simulation on the self-assembly of ABC triblock copolymers. 2. Effects of block sequence
  141. Phase behavior of reversibly associating star Copolymer-like polymer blends
  142. Preparation and characterization of conducting poly(acryloyl chloride)-g- polypyrrole copolymer
  143. Monte Carlo Simulation of Polymers Confined Between Two Surfaces in the Presence of Diluent
  144. Electrochemical Polymerization and Characterization of Conducting Copolymers from Pyrrole and Poly(acryloyl chloride)
  145. Preparation of clay-dispersed poly(styrene-co-acrylonitrile) nanocomposites using poly(ϵ-caprolactone) as a compatibilizer
  146. Miscibility-Induced Sequential Reordering in Random Copolyesters:  A Monte Carlo Simulation
  147. Studies on Polymer-Metal Interfaces, 4. Effect of Substituent of Polymethacrylate on the Interfacial Characteristics between Polymethacrylates and Copper
  148. A Monte Carlo Simulation for the Micellization of ABA- and BAB-Type Triblock Copolymers in a Selective Solvent
  149. Cytotoxic activities of acetoxyscirpenediol and ergosterol peroxide from Paecilomyces tenuipes
  150. Effects of competition between phase separation and ester interchange reactions on the phase behavior in a phase-separated immiscible polyester blend: Monte carlo simulation
  151. Analysis of the elastic deformation of semicrystalline poly(trimethylene terephthalate) by the atomistic-continuum model
  152. Cyclization Routes for Formation of Cyclic Oligomers in Poly(ethylene terephthalate)
  153. Off-Lattice Monte Carlo Simulation of Hyperbranched Polymers, 2. Effect of the Reactivity Ratio of Linear to Terminal Unit on the Microstructure of Hyperbranched Polymers Based on AB2 Monomers
  154. A Molecular Dynamics Simulation on the Self-Assembly of ABC Triblock Copolymers, 1. Effects of Block Composition in Symmetric Triblock Copolymers
  155. Off-Lattice Monte Carlo Simulation of Hyperbranched Polymers, 2. Effect of the Reactivity Ratio of Linear to Terminal Unit on the Microstructure of Hyperbranched Polymers Based on AB2 Monomers
  156. Crystal Structure of Poly (hexamethylene 2,6-naphthalate).
  157. Origin of miscibility-induced sequential reordering and crystallization-induced sequential reordering in binary copolyesters: a Monte Carlo simulation
  158. Cocrystallization Behavior of Poly(butylene terephthalate- c o -butylene 2,6-naphthalate) Random Copolymers
  159. Studies on polymer-metal interfaces, 3. An analysis of interfacial characteristics between amine-functionalized polystyrene/copper and between hydroxyl-functionalized polystyrene/copper
  160. Studies on polymer-metal interfaces, 3. An analysis of interfacial characteristics between amine-functionalized polystyrene/copper and between hydroxyl-functionalized polystyrene/copper
  161. Effects of Sub Tg Annealing on the Mechanical Properties of Polycarbonate/Poly(ether ester) Copolymer Blends
  162. Comparison of gas diffusion in poly[1-(trimethylsilyl)-1-propyne] and poly(dimethylsiloxane) by atomistic modeling
  163. Effects of the nitrile group substitution on the gas separation properties of aromatic polyamide membranes
  164. Effect of the reactivity of a crosslinking agent on the microphase separation in sequential IPNs: A Monte Carlo simulation study
  165. Off-lattice Monte Carlo simulation of hyperbranched polymers, 1 Polycondensation of AB2 type monomers
  166. Studies on Polymer−Metal Interfaces. 2. Competitive Adsorption between Oxygen- and Nitrogen-Containing Functionality in Model Copolymers onto Metal Surfaces
  167. Off-lattice Monte Carlo simulation of hyperbranched polymers, 1 Polycondensation of AB2 type monomers
  168. Phase transformation of poly(trimethylene terephthalate) in crystalline state: An atomistic modeling approach
  169. Homogenization process caused by competition between phase separation and ester-interchange reactions in immiscible polyester blends: A Monte Carlo simulation
  170. Homogenization process caused by competition between phase separation and ester-interchange reactions in immiscible polyester blends: A Monte Carlo simulation
  171. Origin of double melting behavior of poly(p-phenylene succinate)
  172. Synthesis and Characterization of Poly(styrene- c o -4-[( tert -butyldimethylsilyl)oxy]styrene) as a Precursor of Hydroxyl-Functionalized Syndiotactic Polystyrene
  173. The effect of transreactions on phase behavior in poly(ethylene 2,6-naphthalate) and poly(ethylene isophthalate) blends
  174. The effect of transreactions on phase behavior in poly(ethylene 2,6‐naphthalate) and poly(ethylene isophthalate) blends
  175. Thermodynamic properties and crystallization behavior of poly(p-phenylene succinate)
  176. Thermodynamic properties and crystallization behavior of poly(p‐phenylene succinate)
  177. Monte Carlo simulation of the order–disorder transition of a symmetric cyclic diblock copolymer system
  178. A Monte Carlo simulation of polymer/polymer interface in the presence of block copolymer. I. Effects of the chain length of block copolymer and interaction energy
  179. Studies on polymer-metal interfaces
  180. Effects of mixing temperatures on the morphology and toughness of epoxy/polyamide blends
  181. Effects of mixing temperatures on the morphology and toughness of epoxy/polyamide blends
  182. Encapsulation in Polysulfone/Polycarbonate/Impact Modifier Blends
  183. Analysis of the mechanical behavior of poly(trimethylene terephthalate) in an amorphous state under uniaxial extension–compression condition through atomistic modeling
  184. Synthesis of 4-tert-butyldimethylsilyloxystyrene and its copolymerization with styrene using (η5-indenyl)trichlorotitanium in the presence of methylaluminoxane
  185. Effects of Ester Interchange Reactions on the Phase Behavior of an Immiscible Polyester Blend:  Monte Carlo Simulation
  186. Yielding and plastic behaviour of amorphous atactic poly(oxypropylene) under uniaxial compression: an atomistic modeling approach
  187. Analysis of the mechanical behavior of amorphous atactic poly(oxypropylene) by atomistic modeling
  188. Analysis of the mechanical behavior of amorphous atactic poly(oxypropylene) by atomistic modeling
  189. Structure–property relationships of polyimides: a molecular simulation approach
  190. Effects of Comonomer Structure on the Polymorphic Behavior of Syndiotactic Polystyrene-Based Random Copolymers
  191. Temperature and molecular weight dependence of interfacial tension between immiscible polymer pairs by the square gradient theory combined with the Flory-Orwoll-Vrij equation-of-state theory
  192. Synthesis of a diphenylethylene derivative carrying aromatic tertiary amine groups and its use in chain end functionalization of alkyllithium-initiated polymerizations
  193. Synthesis of a diphenylethylene derivative carrying aromatic tertiary amine groups and its use in chain end functionalization of alkyllithium-initiated polymerizations
  194. Synthesis of a diphenylethylene derivative carrying aromatic tertiary amine groups and its use in chain end functionalization of alkyllithium-initiated polymerizations
  195. Microstructure effect in the coupling reactions of polymeric organolithium compounds using chlorosilanes
  196. Microstructure effect in the coupling reactions of polymeric organolithium compounds using chlorosilanes
  197. Comparison of activities of homogeneous Ti-based catalysts in the presence of methylaluminoxane (MAO) for synthesis of syndiotactic polystyrene by UV/visible spectroscopic study
  198. Monte Carlo simulation of copolymerization by ester interchange reaction in miscible polyester blends
  199. Monte Carlo simulation of copolymerization by ester interchange reaction in miscible polyester blends
  200. The compatibilizing effect of poly(styrene-co-4-vinylpyridine) copolymers on the polystyrene-polyethylene-based ionomer blends
  201. Miscibility of syndiotactic polystyrene/atactic polystyrene blends by crystallization kinetics and enthalpy relaxation
  202. Correlation between melting behaviour and polymorphism of syndiotactic polystyrene and its blend with poly(2,6-dimethyl-1,4-phenylene oxide)
  203. Effect of the molecular structure of graft copolymer on the interfacial behavior between two immiscible homopolymers: A Monte Carlo simulation
  204. Physicochemical Characteristics of Self-Aggregates of Hydrophobically Modified Chitosans
  205. Monte Carlo simulation of the phase separation dynamics of polymer blends in the presence of block copolymers. IV. Effects of chain length and composition of repulsive block copolymer
  206. Effect of sizing materials of carbon fiber on solid-state cure of poly(p-phenylene sulfide)
  207. Effect of sizing materials of carbon fiber on solid‐state cure of poly(p‐phenylene sulfide)
  208. Determination of Equation-of-State Parameters by Molecular Simulations and Calculation of the Spinodal Curve for Polystyrene/Poly(vinyl methyl ether) Blends
  209. Prediction of interfacial tension of immisciblepolymer pairs using a square gradient theory combined with the FOV equation-of-state free energy expression
  210. Analysis of pervaporation of methanol-MTBE mixtures through cellulose acetate and cellulose triacetate membranes
  211. Structural Determination and Interior Polarity of Self-Aggregates Prepared from Deoxycholic Acid-Modified Chitosan in Water
  212. Miscibility of Chitosans/Polyamide 6 Blends
  213. Effect of chemical structure on crystallization behavior of poly(phenylene alkylene dicarboxylate) (PPAD)
  214. Effect of chemical structure on crystallization behavior of poly(phenylene alkylene dicarboxylate) (PPAD)
  215. Molecular dimensions of poly(ethylene isophthalate) and poly(ethylene naphthalene-2,6-dicarboxylate)
  216. A closed-loop phase behaviour of ternary homopolymer blend composed of three miscible binaries
  217. Segmented block copolyetheramides based on nylon 6 and polyoxypropylene. III. SAXS analysis
  218. A Monte Carlo Simulation of Phase Separation Dynamics of Polymer Blends in the Presence of a Block Copolymer. 3. Effect of Interaction Energies among Constituent Segments
  219. Effects of Copolymer Sequence Distribution on the Miscibility of Poly(ethylene oxide)/Poly(styrene- co -acrylic acid) Blends:  A Molecular Simulation Approach
  220. Determination of Equation-of-State Parameters by Molecular Simulations and Application to the Prediction of Surface Properties for Polyethylene
  221. The Block Length Effect of Polystyrene-block-Poly(methyl methacrylate) on the Interfacial Adhesion between Polystyrene-Poly(methyl methacrylate) and between Polystyrene/Phenoxy
  222. Effects of the molecular structure of styrene-isoprene block copolymers on the interfacial characteristics of polystyrene/polyisoprene blends
  223. The effect of electric field on the crystallization of polyamide-6,6 by rheological measurement
  224. Estimation of EOS interaction parameters from scattering and predictions of phase diagram from them
  225. Effect of molecular weight of functionalized polystyrene on the compatibility of blends of polyamide 6 and polystyrene
  226. Interrelationships between Rheological, Morphological, and Mechanical Properties of Polystyrene/Liquid Crystalline Polymer Blends
  227. Preparation of functionalized polystyrene by reactive extrusion and its blend with polyamide 6
  228. Effect of interchange reactions on the molecular weight distribution of poly(ethylene terephthalate): A Monte Carlo simulation
  229. The effect of the viscosity ratio of dispersed phase to matrix on the rheological, morphological, and mechanical properties of polymer blends containing a LCP
  230. Monte Carlo Simulation of Phase Separation Dynamics of a Polymer Blend in the Presence of Block Copolymer. 2. Effect of Block Copolymer Composition
  231. Monte Carlo Simulation of the Phase Separation Dynamics of Polymer Blends in the Presence of Block Copolymers. 1. Effect of the Interaction Energy and Chain Length of the Block Copolymers
  232. Effect of Chain Flexibility on Selectivity in the Gas Separation Process: Molecular Dynamics Simulation
  233. Temperature and Molecular Weight Effect of Styrene–Isoprene Diblock Copolymers on the Interfacial Tension between Polystyrene and Polyisoprene
  234. Modified free-volume model for pervaporation of water/ethanol mixtures through membranes containing hydrophilic groups or ions
  235. Effects of Chemical Modification of Liquid Crystalline Polymer on the Rheological, Morphological, and Mechanical Properties of Nylon 6/Liquid Crystalline Polymer Blends
  236. Segmented block copolyetheramides based on nylon 6 and polyoxypropylene. II. Structure and properties
  237. The effect of a partly hydrolyzed styrene-tert-butyl acrylate diblock copolymer on the properties of poly(2,6-dimethyl-1,4-phenylene ether) (PPE) and polyamide-6 (PA) blends
  238. The morphology and mechanical properties of phenoxy/liquid crystalline polymer blends and the effect of transesterification
  239. The effect of the viscosity of epoxy prepolymer on the generated morphology in rubber-toughened epoxy resin
  240. The effect of molecular weight and polydispersity of polystyrene on the interfacial tension between polystyrene and polybutadiene
  241. Effect of Reactivity on Cure and Phase Separation Behavior in Epoxy Resin Modified with Thermoplastic Polymer: A Monte Carlo Simulation Approach
  242. Segmented block copolyetheramides based on nylon 6 and polyoxypropylene. I. Synthesis and characterization
  243. Effect of solvent or hydrophilic polymer on the hydration melting behavior of polyacrylonitrile
  244. Effect of styrene-4-vinyl pyridine diblock copolymer on morphological, thermal, and mechanical properties of poly(2,6-dimethyl-1,4-phenylene ether)/polyethylene ionomer blends
  245. Miscibility of poly(ether imide)/poly(ethylene terephthalate) blends
  246. Ternary blends of phenoxy/SAN/poly(-ɛ-caprolactone)
  247. Sol-gel transition of polyacrylonitrile/propylene carbonate solution
  248. Compatibilizing Effect of Phenoxy on Immiscible Poly(butylene terephthalate)/Poly(methyl methacrylate) Blends
  249. Separation of water/ethanol mixture through poly(acrylonitrile-co-acrylic acid)/poly(ethylene oxide) membranes by pervaporation
  250. A thermoanalytical study on solid-state cure of poly(p-phenylene sulfide)
  251. Morphological, Rheological, and Mechanical Properties of Polyamide 6/Styrene-Acrylic Acid Copolymer Blends
  252. Association behavior in copolymer blend membranes and the pervaporation of water/ethanol mixtures
  253. Structure development in epoxy resin modified with thermoplastic polymer: a Monte Carlo simulation approach
  254. Morphology and Rheological Properties of Poly(phenylene ether) and Polyamide-6 with a Compatibilizer
  255. The effect of a styrene-methyl methacrylate block copolymer on the morphological, rheological and mechanical properties of poly(2,6-dimethyl-1,4-phenylene ether) (PPE) and poly(hydroxy ether of bisphenol A) (Phenoxy) blends
  256. Melting point depression and phase behavior of poly(ether-sulfone) and poly(ethylene oxide) blends: Equation-of-state theory approach
  257. Thermal stability of polyacrylonitrile in the melt formed by hydration
  258. Ester interchange reactions in polyester: A Monte Carlo simulation approach
  259. Phase behavior of blends of vinyl chloride-vinyl acetate copolymers with polymethacrylates
  260. Rheological properties of poly(?-caprolactone) and poly(styrene-co-acrylonitrile) blends
  261. Thermodynamic analysis on the phase behavior of copolymer blends: an equation of state approach
  262. RHEOLOGICAL PROPERTIES OF POLYMER BLEND CONTAINING A COPOLYMER
  263. Phase behavior of poly(ɛ-caprolactone)/ poly (vinylidene fluoride) blends
  264. The Equation of State Theory for Glass Transition Temperature in Miscible Polymer Blends.
  265. Plasticization Behavior of Polyacrylonitrile and Characterization of Acrylic Fiber Prepared from the Plasticized Melt.
  266. Thermal Properties of Thermotropic Liquid Crystalline Polymer/Polycarbonate Blends.
  267. Morphology, rheological and mechanical properties of poly(phenylene ether) and polyamide-6 blends with a compatibilizer
  268. Miscibility of poly(ε-caprolactone) and of poly(styrene-co-acrylonitrile) with poly(styrene-co-acrylic acid)
  269. Miscibility of Poly(vinylidene fluoride) and Poly(styrene-co-methyl methacrylate) Blends
  270. Phase behavior of ternary polymer blends of poly(styrene-co-acrylic acid), poly(ethylene oxide), and poly(methyl methacrylate)
  271. Equation of state theory for melting point depression in miscible polymer blends
  272. Phase behavior of poly(ethylene oxide) and sulfonated polystyrene blends with and without solvent
  273. Compatibilizing effect of a styrene-methyl methacrylate block copolymer on the phase behavior of poly(2,6-dimethyl-1,4-phenylene oxide) and poly(styrene-co-acrylonitrile) blends
  274. The effects of physical aging on the thermal and mechanical properties of an epoxy polymer
  275. Miscibility of poly(ethylene oxide) and poly(styrene-co-acrylic acid) blends
  276. Structure-property relationships of copolyamides. II. crystal structure of drawn copolyamide films
  277. Sol-Gel transition and crystallization kinetics of ultra-high molecular weight polyethylene/decalin solution
  278. Structure-property relationships of copolyamides. I. Thermal properties and crystallization
  279. Compatibility of nylon 6 and PMMA–oligoamide graft copolymer
  280. Synthesis and thermal properties of crosslinkable phosphazene copolymers
  281. Kinetics of Thermal Degradation of Poly[bis(2,2,2-trifluoroethoxy)phosphazene]
  282. Molecular Simulation Approaches for Multiphase Polymer Systems