Contact

All Stories

  1. A hybrid numerical-experimental strategy for predicting mechanical response of components manufactured via FFF

    Article • Composite Structures, October 2022, Elsevier

    Professor Miguel Cervera

  2. On the mechanics of strain localization in plasticity: isotropic and orthotropic, elasto- and rigid-plastic, associated and non-associated models

    Article • Acta Mechanica, April 2022, Springer Science + Business Media

    Professor Miguel Cervera

  3. Computational characterization of polymeric materials 3D-printed via fused filament fabrication

    Article • Mechanics of Advanced Materials and Structures, February 2022, Taylor & Francis

    Professor Miguel Cervera

  4. Residual Stresses Control in Additive Manufacturing

    Article • Journal of Manufacturing and Materials Processing, December 2021, MDPI AG

    Professor Miguel Cervera

  5. A Comparative Review of XFEM, Mixed FEM and Phase-Field Models for Quasi-brittle Cracking

    Article • Archives of Computational Methods in Engineering, September 2021, Springer Science + Business Media

    Professor Miguel Cervera

  6. Stress, strain and dissipation accurate 3-field formulation for inelastic isochoric deformation

    Article • Finite Elements in Analysis and Design, September 2021, Elsevier

    Professor Miguel Cervera

  7. Simulation-assisted investigation on the formation of layer bands and the microstructural evolution in directed energy deposition of Ti6Al4V blocks

    Article • Virtual and Physical Prototyping, July 2021, Taylor & Francis

    Professor Miguel Cervera

  8. Experimental, Computational, and Dimensional Analysis of the Mechanical Performance of Fused Filament Fabrication Parts

    Article • Polymers, May 2021, MDPI AG

    Professor Miguel Cervera

  9. Warpage Analysis and Control of Thin-Walled Structures Manufactured by Laser Powder Bed Fusion

    Article • Metals, April 2021, MDPI AG

    Professor Miguel Cervera

  10. Strain Localization of Orthotropic Elasto–Plastic Cohesive–Frictional Materials: Analytical Results and Numerical Verification

    Article • Materials, April 2021, MDPI AG

    Professor Miguel Cervera

  11. Modeling of spillage and debris floods as Newtonian and viscoplastic Bingham flows with free surface with mixed stabilized finite elements

    Article • Journal of Non-Newtonian Fluid Mechanics, April 2021, Elsevier

    Professor Miguel Cervera

  12. Substrate design to minimize residual stresses in Directed Energy Deposition AM processes

    Article • Materials & Design, April 2021, Elsevier

    Professor Miguel Cervera

  13. Accurate and locking-free analysis of beams, plates and shells using solid elements

    Article • Computational Mechanics, January 2021, Springer Science + Business Media

    Professor Miguel Cervera

  14. An adaptive Finite Element strategy for the numerical simulation of additive manufacturing processes

    Article • Additive Manufacturing, January 2021, Elsevier

    Professor Miguel Cervera

  15. Modeling of the Effect of the Building Strategy on the Thermomechanical Response of Ti-6Al-4V Rectangular Parts Manufactured by Laser Directed Energy Deposition

    Article • Metals, December 2020, MDPI AG

    Professor Miguel Cervera

  16. Numerical and experimental analysis of the structural performance of AM components built by fused filament fabrication

    Article • International Journal of Mechanics and Materials in Design, October 2020, Springer Science + Business Media

    Professor Miguel Cervera

  17. Structural size effect: Experimental, theoretical and accurate computational assessment

    Article • Engineering Structures, June 2020, Elsevier

    Professor Miguel Cervera

  18. Architecture of a multi-crack model with full closing, reopening and sliding capabilities

    Article • Computational Mechanics, March 2020, Springer Science + Business Media

    Professor Miguel Cervera

  19. Defect formation and material flow in Friction Stir Welding

    Article • European Journal of Mechanics - A/Solids, March 2020, Elsevier

    Professor Miguel Cervera

  20. Numerical modelling of heat transfer and experimental validation in powder-bed fusion with the virtual domain approximation

    Article • Finite Elements in Analysis and Design, January 2020, Elsevier

    Professor Miguel Cervera

  21. Strain localization analysis of Hill’s orthotropic elastoplasticity: analytical results and numerical verification

    Article • Computational Mechanics, October 2019, Springer Science + Business Media

    Professor Miguel Cervera

  22. Corrigendum to “Modelling of Bingham and Herschel-Bulkley flows with mixed P1/P1 finite elements stabilized with Orthogonal Subgrid Scale” [J. Nonnewt Fluid Mech, 228, 2016, p. 1–16]

    Article • Journal of Non-Newtonian Fluid Mechanics, May 2019, Elsevier

    Professor Miguel Cervera

  23. In situ measurements and thermo-mechanical simulation of Ti–6Al–4V laser solid forming processes

    Article • International Journal of Mechanical Sciences, April 2019, Elsevier

    Professor Miguel Cervera

  24. Out-of-plane seismic response and failure mechanism of masonry structures using finite elements with enhanced strain accuracy

    Article • Engineering Failure Analysis, March 2019, Elsevier

    Professor Miguel Cervera

  25. Residual stress and distortion of rectangular and S-shaped Ti-6Al-4V parts by Directed Energy Deposition: Modelling and experimental calibration

    Article • Additive Manufacturing, March 2019, Elsevier

    Professor Miguel Cervera

  26. Prediction of joint line remnant defect in friction stir welding

    Article • International Journal of Mechanical Sciences, February 2019, Elsevier

    Professor Miguel Cervera

  27. Tracking of Localized Cracks in the Finite Element Analysis of Masonry Walls

    Article • January 2019, Springer Science + Business Media

    Professor Miguel Cervera

  28. Effect of the Tool Tilt Angle on the Heat Generation and the Material Flow in Friction Stir Welding

    Article • Metals, December 2018, MDPI AG

    Professor Miguel Cervera

  29. Numerical analysis of the manufacturing processes of a mock-up of the ITER NHF First Wall Panel

    Article • Fusion Engineering and Design, October 2018, Elsevier

    Professor Miguel Cervera

  30. Modeling of Microstructure Evolution of Ti6Al4V for Additive Manufacturing

    Article • Metals, August 2018, MDPI AG

    Professor Miguel Cervera

  31. Challenges, Tools and Applications of Tracking Algorithms in the Numerical Modelling of Cracks in Concrete and Masonry Structures

    Article • Archives of Computational Methods in Engineering, June 2018, Springer Science + Business Media

    Professor Miguel Cervera

  32. A Phenomenological Model for the Solidification of Eutectic and Hypoeutectic Alloys Including Recalescence and Undercooling

    Article • Journal of Heat Transfer, May 2018, ASME International

    Professor Miguel Cervera

  33. A novel positive/negative projection in energy norm for the damage modeling of quasi-brittle solids

    Article • International Journal of Solids and Structures, May 2018, Elsevier

    Professor Miguel Cervera

  34. Finite element analysis and experimental validation of the thermomechanical behavior in laser solid forming of Ti-6Al-4V

    Article • Additive Manufacturing, May 2018, Elsevier

    Professor Miguel Cervera

  35. Numerical Modelling of Microstructure Evolution in Friction Stir Welding (FSW)

    Article • Metals, March 2018, MDPI AG

    Professor Miguel Cervera

  36. Cracking of quasi-brittle structures under monotonic and cyclic loadings: A d+/d− damage model with stiffness recovery in shear

    Article • International Journal of Solids and Structures, March 2018, Elsevier

    Professor Miguel Cervera

  37. Appraisement of planar, bending and twisting cracks in 3D with isotropic and orthotropic damage models

    Article • International Journal of Fracture, January 2018, Springer Science + Business Media

    Professor Miguel Cervera

  38. Numerical modelling and experimental validation in Selective Laser Melting

    Article • Additive Manufacturing, December 2017, Elsevier

    Professor Miguel Cervera

  39. Experimental Validation of an FSW Model with an Enhanced Friction Law: Application to a Threaded Cylindrical Pin Tool

    Article • Metals, November 2017, MDPI AG

    Professor Miguel Cervera

  40. Enhanced friction model for Friction Stir Welding (FSW) analysis: Simulation and experimental validation

    Article • International Journal of Mechanical Sciences, November 2017, Elsevier

    Professor Miguel Cervera

  41. Finite element modeling of quasi-brittle cracks in 2D and 3D with enhanced strain accuracy

    Article • Computational Mechanics, July 2017, Springer Science + Business Media

    Professor Miguel Cervera

  42. Una formulación mixta estabilizada explícita para plasticidad con localización de deformaciones

    Article • Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, July 2017, Scipedia, S.L.

    Professor Miguel Cervera

  43. Tracking multi-directional intersecting cracks in numerical modelling of masonry shear walls under cyclic loading

    Article • Meccanica, June 2017, Springer Science + Business Media

    Professor Miguel Cervera

  44. An Enhanced Finite Element Macro-Model for the Realistic Simulation of Localized Cracks in Masonry Structures: A Large-Scale Application

    Article • International Journal of Architectural Heritage, May 2017, Taylor & Francis

    Professor Miguel Cervera

  45. 3D numerical modelling of twisting cracks under bending and torsion of skew notched beams

    Article • Engineering Fracture Mechanics, May 2017, Elsevier

    Professor Miguel Cervera

  46. Strain Localization of Elastic-Damaging Frictional-Cohesive Materials: Analytical Results and Numerical Verification

    Article • Materials, April 2017, MDPI AG

    Professor Miguel Cervera

  47. An Energy-Equivalent d+/d− Damage Model with Enhanced Microcrack Closure-Reopening Capabilities for Cohesive-Frictional Materials

    Article • Materials, April 2017, MDPI AG

    Professor Miguel Cervera

  48. Numerical simulation and experimental calibration of additive manufacturing by blown powder technology. Part I: thermal analysis

    Article • Rapid Prototyping Journal, March 2017, Emerald

    Professor Miguel Cervera

  49. A fast and accurate two-stage strategy to evaluate the effect of the pin tool profile on metal flow, torque and forces in friction stir welding

    Article • International Journal of Mechanical Sciences, March 2017, Elsevier

    Professor Miguel Cervera

  50. Formulación mixta estabilizada explícita de elementos finitos para sólidos compresibles y quasi-incompresibles

    Article • Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, January 2017, Scipedia, S.L.

    Professor Miguel Cervera

  51. Finite element modelling of internal and multiple localized cracks

    Article • Computational Mechanics, November 2016, Springer Science + Business Media

    Professor Miguel Cervera

  52. Bond behavior and tensile properties of FRCM composites applied on masonry panels

    Article • November 2016, Taylor & Francis

    Professor Miguel Cervera

  53. On site composites-to-masonry bond evaluation in presence of rising damp and salt crystallization

    Article • November 2016, Taylor & Francis

    Professor Miguel Cervera

  54. Numerical modeling of the electron beam welding and its experimental validation

    Article • Finite Elements in Analysis and Design, November 2016, Elsevier

    Professor Miguel Cervera

  55. High-fidelity prediction of crack formation in 2D and 3D pullout tests

    Article • Computers & Structures, August 2016, Elsevier

    Professor Miguel Cervera

  56. Elementos finitos mixtos estabilizados para flujos confinados de Bingham y de Herschel-Bulkley Parte II: soluciones numéricas

    Article • Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, July 2016, Scipedia, S.L.

    Professor Miguel Cervera

  57. Local–global strategy for the prediction of residual stresses in FSW processes

    Article • The International Journal of Advanced Manufacturing Technology, June 2016, Springer Science + Business Media

    Professor Miguel Cervera

  58. Explicit mixed strain–displacement finite elements for compressible and quasi-incompressible elasticity and plasticity

    Article • Computational Mechanics, June 2016, Springer Science + Business Media

    Professor Miguel Cervera

  59. A thermodynamically consistent plastic-damage framework for localized failure in quasi-brittle solids: Material model and strain localization analysis

    Article • International Journal of Solids and Structures, June 2016, Elsevier

    Professor Miguel Cervera

  60. Elementos finitos mixtos estabilizados para flujos confinados de Bingham y de Herschel-Bulkley. ParteI: Formulación

    Article • Revista Internacional de Métodos Numéricos para Cálculo y Diseño en Ingeniería, April 2016, Scipedia, S.L.

    Professor Miguel Cervera

  61. Modelling of Bingham and Herschel–Bulkley flows with mixed P1/P1 finite elements stabilized with orthogonal subgrid scale

    Article • Journal of Non-Newtonian Fluid Mechanics, February 2016, Elsevier

    Professor Miguel Cervera

  62. Challenges in Thermo-mechanical Analysis of Friction Stir Welding Processes

    Article • Archives of Computational Methods in Engineering, January 2016, Springer Science + Business Media

    Professor Miguel Cervera

  63. A crack-tracking technique for localized cohesive–frictional damage

    Article • Engineering Fracture Mechanics, December 2015, Elsevier

    Professor Miguel Cervera

  64. 3D numerical models using a fluid or a solid formulation of FSW processes with a non-cylindrical pin

    Article • Advanced Modeling and Simulation in Engineering Sciences, November 2015, Springer Science + Business Media

    Professor Miguel Cervera

  65. 3D numerical models of FSW processes with non-cylindrical pin

    Article • Advances in Materials and Processing Technologies, October 2015, Taylor & Francis

    Professor Miguel Cervera

  66. On the conformity of strong, regularized, embedded and smeared discontinuity approaches for the modeling of localized failure in solids

    Article • International Journal of Solids and Structures, October 2015, Elsevier

    Professor Miguel Cervera

  67. On the equivalence between traction- and stress-based approaches for the modeling of localized failure in solids

    Article • Journal of the Mechanics and Physics of Solids, September 2015, Elsevier

    Professor Miguel Cervera

  68. Stress-accurate Mixed FEM for soil failure under shallow foundations involving strain localization in plasticity

    Article • Computers and Geotechnics, March 2015, Elsevier

    Professor Miguel Cervera

  69. Mixed stabilized finite element methods in nonlinear solid mechanics. Part III: Compressible and incompressible plasticity

    Article • Computer Methods in Applied Mechanics and Engineering, March 2015, Elsevier

    Professor Miguel Cervera

  70. Explicit mixed strain-displacement finite element for dynamic geometrically non-linear solid mechanics

    Article • Computational Mechanics, January 2015, Springer Science + Business Media

    Professor Miguel Cervera

  71. A mixed three-field FE formulation for stress accurate analysis including the incompressible limit

    Article • Computer Methods in Applied Mechanics and Engineering, January 2015, Elsevier

    Professor Miguel Cervera

  72. Analysis of the Effect of Provisional Ties on the Construction and Current Deformation of Mallorca Cathedral

    Article • International Journal of Architectural Heritage, December 2014, Taylor & Francis

    Professor Miguel Cervera

  73. A localized mapped damage model for orthotropic materials

    Article • Engineering Fracture Mechanics, July 2014, Elsevier

    Professor Miguel Cervera

  74. Computational Modeling and Sub-Grid Scale Stabilization of Incompressibility and Convection in the Numerical Simulation of Friction Stir Welding Processes

    Article • Archives of Computational Methods in Engineering, February 2014, Springer Science + Business Media

    Professor Miguel Cervera

  75. Shaped Metal Deposition Processes

    Article • January 2014, Springer Science + Business Media

    Professor Miguel Cervera

  76. Numerical Simulation and Visualization of Material Flow in Friction Stir Welding via Particle Tracing

    Article • January 2014, Springer Science + Business Media

    Professor Miguel Cervera

  77. Material flow visualization in Friction Stir Welding via particle tracing

    Article • International Journal of Material Forming, December 2013, Springer Science + Business Media

    Professor Miguel Cervera

  78. Comparison of a Fluid and a Solid Approach for the Numerical Simulation of Friction Stir Welding with a Non‐Cylindrical Pin

    Article • steel research international, December 2013, Wiley

    Professor Miguel Cervera

  79. An orthotropic damage model for the analysis of masonry structures

    Article • Construction and Building Materials, April 2013, Elsevier

    Professor Miguel Cervera

  80. An apropos kinematic framework for the numerical modeling of friction stir welding

    Article • Computers & Structures, February 2013, Elsevier

    Professor Miguel Cervera

  81. Numerical modeling of friction stir welding processes

    Article • Computer Methods in Applied Mechanics and Engineering, February 2013, Elsevier

    Professor Miguel Cervera

  82. Continuum FE models for the analysis of Mallorca Cathedral

    Article • Engineering Structures, January 2013, Elsevier

    Professor Miguel Cervera

  83. A novel stress-accurate FE technology for highly non-linear analysis with incompressibility constraint. Application to the numerical simulation of the FSW process

    Article • January 2013, American Institute of Physics

    Professor Miguel Cervera

  84. Lugares rurales versus espacios naturalizados. Conocimientos y reconocimientos en las lógicas patrimoniales de las áreas protegidas

    Article • AIBR Revista de Antropologia Iberoamericana, January 2013, AIBR - Asociacion de Antropologos Iberoamericanos en Red

    Professor Miguel Cervera

  85. Viscoelasticity and Damage Model for Creep Behavior of Historical Masonry Structures

    Article • The Open Civil Engineering Journal, November 2012, Bentham Science Publishers

    Professor Miguel Cervera

  86. Benchmarking on bifurcation and localization in J2 plasticity for plane stress and plane strain conditions

    Article • Computer Methods in Applied Mechanics and Engineering, October 2012, Elsevier

    Professor Miguel Cervera

  87. Antibiotic Prevention of Acute Exacerbations of COPD

    Article • New England Journal of Medicine, July 2012, New England Journal of Medicine (NEJM/MMS)

    Professor Miguel Cervera

  88. Mesh objective modeling of cracks using continuous linear strain and displacement interpolations

    Article • International Journal for Numerical Methods in Engineering, February 2011, Wiley

    Professor Miguel Cervera

  89. Continuum damage model for orthotropic materials: Application to masonry

    Article • Computer Methods in Applied Mechanics and Engineering, February 2011, Elsevier

    Professor Miguel Cervera

  90. A crack-tracking technique for localized damage in quasi-brittle materials

    Article • Engineering Fracture Mechanics, September 2010, Elsevier

    Professor Miguel Cervera

  91. Mixed stabilized finite element methods in nonlinear solid mechanics

    Article • Computer Methods in Applied Mechanics and Engineering, August 2010, Elsevier

    Professor Miguel Cervera

  92. Mixed stabilized finite element methods in nonlinear solid mechanics

    Article • Computer Methods in Applied Mechanics and Engineering, August 2010, Elsevier

    Professor Miguel Cervera

  93. Finite element modeling of multi-pass welding and shaped metal deposition processes

    Article • Computer Methods in Applied Mechanics and Engineering, August 2010, Elsevier

    Professor Miguel Cervera

  94. Structural Analysis of Masonry Historical Constructions. Classical and Advanced Approaches

    Article • Archives of Computational Methods in Engineering, July 2010, Springer Science + Business Media

    Professor Miguel Cervera

  95. A Computational Model for the Numerical Simulation of FSW Processes

    Article • January 2010, American Institute of Physics

    Professor Miguel Cervera

  96. Size effect and localization in J2 plasticity

    Article • International Journal of Solids and Structures, August 2009, Elsevier

    Professor Miguel Cervera

  97. A smeared-embedded mesh-corrected damage model for tensile cracking

    Article • International Journal for Numerical Methods in Engineering, December 2008, Wiley

    Professor Miguel Cervera

  98. An orthotropic mesh corrected crack model

    Article • Computer Methods in Applied Mechanics and Engineering, March 2008, Elsevier

    Professor Miguel Cervera

  99. On the Numerical Modeling of the Thermomechanical Contact for Metal Casting Analysis

    Article • Journal of Heat Transfer, January 2008, ASME International

    Professor Miguel Cervera

  100. Mesh objective tensile cracking via a local continuum damage model and a crack tracking technique

    Article • Computer Methods in Applied Mechanics and Engineering, December 2006, Elsevier

    Professor Miguel Cervera

  101. Smeared crack approach: back to the original track

    Article • International Journal for Numerical and Analytical Methods in Geomechanics, April 2006, Wiley

    Professor Miguel Cervera

  102. On the orthogonal subgrid scale pressure stabilization of finite deformation J2 plasticity

    Article • Computer Methods in Applied Mechanics and Engineering, February 2006, Elsevier

    Professor Miguel Cervera

  103. Current Developments on the Coupled Thermomechanical Computational Modeling of Metal Casting Processes

    Article • January 2006, Springer Science + Business Media

    Professor Miguel Cervera

  104. Modeling Material Failure in Concrete Structures under Cyclic Actions

    Article • Journal of Structural Engineering, December 2004, American Society of Civil Engineers (ASCE)

    Professor Miguel Cervera

  105. A stabilized formulation for incompressible plasticity using linear triangles and tetrahedra

    Article • International Journal of Plasticity, August 2004, Elsevier

    Professor Miguel Cervera

  106. Softening, localization and stabilization: capture of discontinuous solutions in J2 plasticity

    Article • International Journal for Numerical and Analytical Methods in Geomechanics, April 2004, Wiley

    Professor Miguel Cervera

  107. Shear band localization via local J2 continuum damage mechanics

    Article • Computer Methods in Applied Mechanics and Engineering, March 2004, Elsevier

    Professor Miguel Cervera

  108. Mixed linear/linear simplicial elements for incompressible elasticity and plasticity

    Article • Computer Methods in Applied Mechanics and Engineering, December 2003, Elsevier

    Professor Miguel Cervera

  109. A stabilized formulation for incompressible elasticity using linear displacement and pressure interpolations

    Article • Computer Methods in Applied Mechanics and Engineering, November 2002, Elsevier

    Professor Miguel Cervera

  110. Numerical modelling of concrete curing, regarding hydration and temperature phenomena

    Article • Computers & Structures, July 2002, Elsevier

    Professor Miguel Cervera

  111. On the constitutive modeling of coupled thermomechanical phase-change problems

    Article • International Journal of Plasticity, December 2001, Elsevier

    Professor Miguel Cervera

  112. Preface

    Article • International Journal of Plasticity, December 2001, Elsevier

    Professor Miguel Cervera

  113. Simulation of Construction of RCC Dams. I: Temperature and Aging

    Article • Journal of Structural Engineering, September 2000, American Society of Civil Engineers (ASCE)

    Professor Miguel Cervera

  114. Simulation of Construction of RCC Dams. II: Stress and Damage

    Article • Journal of Structural Engineering, September 2000, American Society of Civil Engineers (ASCE)

    Professor Miguel Cervera

  115. Non-random dispersal in the butterfly Maniola jurtina : implications for metapopulation models

    Article • Proceedings of the Royal Society B Biological Sciences, August 2000, Royal Society Publishing

    Professor Miguel Cervera

  116. Thermo-mechanical analysis of industrial solidification processes

    Article • International Journal for Numerical Methods in Engineering, November 1999, Wiley

    Professor Miguel Cervera

  117. Thermo-Chemo-Mechanical Model for Concrete. I: Hydration and Aging

    Article • Journal of Engineering Mechanics, September 1999, American Society of Civil Engineers (ASCE)

    Professor Miguel Cervera

  118. Thermo-Chemo-Mechanical Model for Concrete. II: Damage and Creep

    Article • Journal of Engineering Mechanics, September 1999, American Society of Civil Engineers (ASCE)

    Professor Miguel Cervera

  119. Numerical prediction of temperature and density distributions in selective laser sintering processes

    Article • Rapid Prototyping Journal, March 1999, Emerald

    Professor Miguel Cervera

  120. Strong discontinuities and continuum plasticity models: the strong discontinuity approach

    Article • International Journal of Plasticity, March 1999, Elsevier

    Professor Miguel Cervera

  121. On the formulation of coupled thermoplastic problems with phase-change

    Article • International Journal of Plasticity, March 1999, Elsevier

    Professor Miguel Cervera

  122. A strain-based plastic viscous-damage model for massive concrete structures

    Article • International Journal of Solids and Structures, May 1998, Elsevier

    Professor Miguel Cervera

  123. Failure pressure evaluation of the containment building of a large dry nuclear power plant

    Article • Nuclear Engineering and Design, April 1998, Elsevier

    Professor Miguel Cervera

  124. On the computational efficiency and implementation of block‐iterative algorithms for nonlinear coupled problems

    Article • Engineering Computations, September 1996, Emerald

    Professor Miguel Cervera

  125. A RATE-DEPENDENT ISOTROPIC DAMAGE MODEL FOR THE SEISMIC ANALYSIS OF CONCRETE DAMS

    Article • Earthquake Engineering & Structural Dynamics, September 1996, Wiley

    Professor Miguel Cervera

  126. Seismic evaluation of concrete dams via continuum damage models

    Article • Earthquake Engineering & Structural Dynamics, September 1995, Wiley

    Professor Miguel Cervera

  127. Numerical analysis of stereolithography processes using the finite element method

    Article • Rapid Prototyping Journal, June 1995, Emerald

    Professor Miguel Cervera

  128. A finite volume format for structural mechanics

    Article • International Journal for Numerical Methods in Engineering, January 1994, Wiley

    Professor Miguel Cervera

  129. DERIVATION OF THIN PLATE BENDING ELEMENTS WITH ONE DEGREE OF FREEDOM PER NODE: A SIMPLE THREE NODE TRIANGLE

    Article • Engineering Computations, June 1993, Emerald

    Professor Miguel Cervera

  130. A penalty finite element method for non‐Newtonian creeping flows

    Article • International Journal for Numerical Methods in Engineering, April 1993, Wiley

    Professor Miguel Cervera

  131. The intrinsic time for the streamline upwind/Petrov-Galerkin formulation using quadratic elements

    Article • Computer Methods in Applied Mechanics and Engineering, January 1992, Elsevier

    Professor Miguel Cervera

  132. A computational model for progressive cracking in large dams due to the swelling of concrete

    Article • Engineering Fracture Mechanics, January 1990, Elsevier

    Professor Miguel Cervera

  133. A Finite Element Model for the Nonlinear Analysis of Reinforced Concrete Shell Structures

    Article • January 1987, Springer Science + Business Media

    Professor Miguel Cervera

  134. Nonlinear analysis of reinforced concrete plate and shell structures using 20-noded isoparametric brick elements

    Article • Computers & Structures, January 1987, Elsevier

    Professor Miguel Cervera

  135. Preconditioned conjugate gradient method for the non‐linear finite element analysis with particular reference to 3D reinforced concrete structures

    Article • Engineering Computations, March 1986, Emerald

    Professor Miguel Cervera