All Stories

  1. Modeling of torsion fatigue in shape memory alloys

    Article • Journal of Intelligent Material Systems and Structures, October 2019, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  2. Rotary bending fatigue analysis of shape memory alloys

    Article • Journal of Intelligent Material Systems and Structures, September 2017, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  3. Finite element simulation of ferromagnetic shape memory alloys using a revised constitutive model

    Article • Journal of Intelligent Material Systems and Structures, May 2017, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  4. Proposition of R-phase transformation strip in the phase diagram of Ni-Ti shape memory alloy using electromechanical experiments

    Article • Journal of Intelligent Material Systems and Structures, March 2017, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  5. Design, analysis, and manufacture of a tension–compression self-centering damper based on energy dissipation of pre-stretched superelastic shape memory alloy wires

    Article • Journal of Intelligent Material Systems and Structures, January 2017, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  6. Thermomechanical modeling and experimental investigation of transformation-induced creep and stress relaxation in shape memory alloy wires

    Article • Journal of Intelligent Material Systems and Structures, September 2016, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  7. A Comparative Analysis on Two Types of Oral Implants, Bone-Level and Tissue-Level, with Different Cantilever Lengths of Fixed Prosthesis

    Article • Journal of Prosthodontics, December 2015, Wiley

    Prof. Mahmoud Kadkhodaei

  8. Constitutive modeling of Ni–Mn–Ga ferromagnetic shape memory alloys under biaxial compression

    Article • Journal of Intelligent Material Systems and Structures, July 2015, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  9. A microplane constitutive model for shape memory alloys considering tension–compression asymmetry

    Article • Smart Materials and Structures, June 2015, Institute of Physics Publishing

    Prof. Mahmoud Kadkhodaei

  10. Investigation on local and global behaviors of pseudoelastic shape memory alloy wires in simple tensile test considering stress concentration of grippers

    Article • Journal of Intelligent Material Systems and Structures, January 2015, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  11. A comprehensive energy approach to predict fatigue life in CuAlBe shape memory alloy

    Article • Smart Materials and Structures, December 2014, Institute of Physics Publishing

    Prof. Mahmoud Kadkhodaei

  12. Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling

    Article • International Journal of Mechanical Sciences, November 2014, Elsevier

    Prof. Mahmoud Kadkhodaei

  13. A non-local implicit gradient-enhanced model for unstable behaviors of pseudoelastic shape memory alloys in tensile loading

    Article • International Journal of Solids and Structures, November 2014, Elsevier

    Prof. Mahmoud Kadkhodaei

  14. A geometrical approach to determine reorientation start and continuation conditions in ferromagnetic shape memory alloys considering the effects of loading history

    Article • Smart Materials and Structures, October 2014, Institute of Physics Publishing

    Prof. Mahmoud Kadkhodaei

  15. A Computationally Efficient Modeling Approach for Predicting Mechanical Behavior of Cellular Lattice Structures

    Article • Journal of Materials Engineering and Performance, October 2014, Springer Science + Business Media

    Prof. Mahmoud Kadkhodaei

  16. Anisotropic behavior of superelastic NiTi shape memory alloys; an experimental investigation and constitutive modeling

    Article • Mechanics of Materials, October 2014, Elsevier

    Prof. Mahmoud Kadkhodaei

  17. Direct numerical determination of stabilized dissipated energy of shape memory alloys under cyclic tensile loadings

    Article • Journal of Intelligent Material Systems and Structures, September 2014, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  18. A Modified Microplane Model Using Transformation Surfaces to Consider Loading History on Phase Transition in Shape Memory Alloys

    Article • September 2014, ASME International

    Prof. Mahmoud Kadkhodaei

  19. A thermodynamically-consistent microplane model for shape memory alloys

    Article • International Journal of Solids and Structures, July 2014, Elsevier

    Prof. Mahmoud Kadkhodaei

  20. Modeling of tension-torsion coupling and tension-compression asymmetry in SMA

    Article • Smart Materials and Structures, June 2014, Institute of Physics Publishing

    Reza Mehrabi, Prof. Mahmoud Kadkhodaei

  21. Finite element simulation of shape memory alloy wires using a user material subroutine: Parametric study on heating rate, conductivity, and heat convection

    Article • Journal of Intelligent Material Systems and Structures, May 2014, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  22. Asymmetrical rolling analysis of bonded two-layer sheets and evaluation of outgoing curvature

    Article • The International Journal of Advanced Manufacturing Technology, April 2014, Springer Science + Business Media

    Prof. Mahmoud Kadkhodaei

  23. Behaviors of Ferromagnetic Shape Memory Alloy Ni-Mn-Ga Under Incomplete Magneto-Mechanical Loading-Unloading Cycles

    Article • Advanced Engineering Materials, April 2014, Wiley

    Prof. Mahmoud Kadkhodaei

  24. Microplane modeling of shape memory alloy tubes under tension, torsion, and proportional tension–torsion loading

    Article • Journal of Intelligent Material Systems and Structures, February 2014, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  25. A modified constitutive model with an enhanced phase diagram for ferromagnetic shape memory alloys

    Article • Journal of Intelligent Material Systems and Structures, February 2014, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  26. A cycle-dependent phase diagram to investigate the thermomechanical behavior of shape memory alloy wires under cyclic loadings

    Article • Journal of Intelligent Material Systems and Structures, December 2013, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  27. An Investigation into the Simple Tensile Test of SMA Wires Considering Stress Concentration of Grippers

    Article • Journal of Materials Engineering and Performance, December 2013, Springer Science + Business Media

    Prof. Mahmoud Kadkhodaei

  28. Microplane Modeling of Shape Memory Alloys in an Alternative Formulation

    Article • September 2013, ASME International

    Reza Mehrabi, Prof. Mahmoud Kadkhodaei

  29. Buckling analysis of rectangular functionally graded plates under various edge conditions using Fourier series expansion

    Article • European Journal of Mechanics - A/Solids, September 2013, Elsevier

    Prof. Mahmoud Kadkhodaei

  30. Finite Element Modeling of the Elastic Modulus of Ti6Al4V Scaffold Fabricated by SLM

    Article • June 2013, American Society of Civil Engineers (ASCE)

    Prof. Mahmoud Kadkhodaei

  31. New multi-pass hot channel section rolling design by the finite element method

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, February 2013, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  32. 3D phenomenological constitutive modeling of shape memory alloys based on microplane theory

    Article • Smart Materials and Structures, January 2013, Institute of Physics Publishing

    Reza Mehrabi, Prof. Mahmoud Kadkhodaei

  33. Slab Analysis of Asymmetrical Rolling of Bonded Two-layer Sheets

    Article • ISIJ International, January 2013, Iron and Steel Institute of Japan

    Prof. Mahmoud Kadkhodaei

  34. An investigative study on the performance of twist roll machine in a continuous cold strip rolling mill

    Article • Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science, November 2012, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  35. Shape Memory Effect Behavior of NiTi Torque Tubes in Torsion

    Article • September 2012, ASME International

    Reza Mehrabi, Prof. Mahmoud Kadkhodaei

  36. Analysis of nonlinear free vibration and damping of a clamped–clamped beam with embedded prestrained shape memory alloy wires

    Article • Journal of Intelligent Material Systems and Structures, May 2012, SAGE Publications

    Prof. Mahmoud Kadkhodaei

  37. Numerical Implementation of a Thermomechanical Constitutive Model for Shape Memory Alloys Using Return Mapping Algorithm and Microplane Theory

    Article • Advanced Materials Research, May 2012, Trans Tech Publications

    Reza Mehrabi, Prof. Mahmoud Kadkhodaei

  38. Asymmetrical sheet rolling analysis and evaluation of developed curvature

    Article • The International Journal of Advanced Manufacturing Technology, November 2011, Springer Science + Business Media

    Prof. Mahmoud Kadkhodaei

  39. A Study on Fracture Locus of St12 Steel And Implementation Ductile Damage Criteria

    Article • January 2010, American Institute of Physics

    Prof. Mahmoud Kadkhodaei

  40. Microplane modelling of shape memory alloys

    Article • Physica Scripta, November 2007, Institute of Physics Publishing

    Prof. Mahmoud Kadkhodaei

  41. Modeling of the cyclic thermomechanical response of SMA wires at different strain rates

    Article • Smart Materials and Structures, October 2007, Institute of Physics Publishing

    Prof. Mahmoud Kadkhodaei

  42. Modeling of Shape Memory Alloys Based on Microplane Theory

    Article • Journal of Intelligent Material Systems and Structures, May 2007, SAGE Publications

    Reza Mehrabi, Prof. Mahmoud Kadkhodaei

  43. Analysis of asymmetrical sheet rolling by a genetic algorithm

    Article • International Journal of Mechanical Sciences, May 2007, Elsevier

    Prof. Mahmoud Kadkhodaei

  44. Slab analysis of asymmetrical sheet rolling

    Article • Journal of Materials Processing Technology, July 2004, Elsevier

    Prof. Mahmoud Kadkhodaei