All Stories

  1. Tribology of novel antibiocorrosion coatings
  2. Cover Picture: Macromol. Mater. Eng. 7/2014
  3. Tribological Properties of Polypropylene Composites with Carbon Nanotubes and Sepiolite
  4. Zeta Potential–Viscosity Relationship in Kaolinite Slurry in the Presence of Dispersants
  5. Properties of gypsum composites containing vermiculite and polypropylene fibers: Numerical and experimental results
  6. Preparation of Rice Husk-Based Medium Density Fiberboards: Effects of pH Modification on Mechanical and Tribological Performance
  7. Epoxies
  8. List of Contributors
  9. Improvement of Tribological Properties of Metal Matrix Composites by Means of Slide Burnishing
  10. Polymer indentation with mesoscopic molecular dynamics
  11. Luffa fibers and gamma radiation as improvement tools of polymer concrete
  12. Bond strength of polymer lightweight aggregate concrete
  13. Scratch and Abrasion Properties of Polyurethane-Based Micro- and Nano-Hybrid Obturation Materials
  14. High impact strength and low wear of epoxy modified by a combination of liquid carboxyl terminated poly(butadiene-co-acrylonitrile) rubber and organoclay
  15. Fuzzy Logic Model for Prediction of Properties of Fiber Reinforced Self-compacting Concrete
  16. Mechanical modeling of a single-walled carbon nanotube using the finite element approach
  17. Simulating scratch behavior of polymers with mesoscopic molecular dynamics
  18. X-Ray, Gamma, and Neutron Radiation Tests on Epoxy-Ferrochromium Slag Composites by Experiments and Monte Carlo Simulations
  19. Molecular dynamics computer simulation of scratch resistance testing of polymers: visualization
  20. Porous crosslinked copolymers of octadecyl acrylate with acrylic acid as sorbers for crude petroleum spills
  21. Porous polymer oil sorbents based on PET fibers with crosslinked copolymer coatings
  22. Estimation of fracture energy of high-strength steel fibre-reinforced concrete using rule-based Mamdani-type fuzzy inference system
  23. Composites of polyester + glass fiber residues vs. composites with mineral fillers
  24. Bismuth telluride-based thermoelectric materials: Coatings as protection against thermal cycling effects
  25. Porous polyurethane foams based on recycled poly(ethylene terephthalate) for oil sorption
  26. Poly(butyl terephthalate)/oxytetramethylene + oxidized carbon nanotubes hybrids: Mechanical and tribological behavior
  27. Tribological properties of ethylene–propylene–diene rubber + polypropylene + thermal‐shock‐resistant ceramic composites
  28. The effect of fly ash content and types of aggregates on the properties of pre-fabricated concrete interlocking blocks (PCIBs)
  29. Mechanical properties of polymer concretes containing different amount of hematite or colemanite
  30. Combined effects of fly ash and waste ferrochromium on properties of concrete
  31. Tribological Properties of Polymer Nanohybrids Containing Gold Nanoparticles Obtained by Laser Ablation
  32. Properties of concrete paving blocks made with waste marble
  33. Thermal, hydrolytic, anticorrosive, and tribological properties of alkyd‐silicone hyperbranched resins with high solid content
  34. Synthesis and characterization of novel alkyd–silicone hyperbranched nanoresins with high solid contents
  35. Plasticizer migration from cross‐linked flexible PVC: Effects on tribology and hardness
  36. Strong thermoplastic elastomers created using nickel nanopowder
  37. The concept of materials brittleness and its applications
  38. Processed wastewater sludge for improvement of mechanical properties of concretes
  39. Mechanical properties of polypropylene-fiber reinforced concrete after gamma irradiation
  40. Optimization of Tribological and Mechanical Properties of Nanocomposites of Polyurethane/Poly(vinyl acetate)/CaCO3
  41. Encapsulation of hydrophobic drugs in a copolymer: Glass transition behavior and miscibility evaluation
  42. Natural-Synthetic Hybrid Polymers Developed via Electrospinning: The Effect of PET in Chitosan/Starch System
  43. Vulcanization Characteristics and Dynamic Mechanical Behavior of Natural Rubber Reinforced with Silane Modified Silica
  44. Workability and Mechanical Performance of Steel Fiber-Reinforced Self-Compacting Concrete with Fly Ash
  45. Influence of Silanization Treatment on Thermomechanical Properties of Multiwalled Carbon Nanotubes: Poly(methylmethacrylate) Nanocomposites
  46. Thermal and mechanical properties of EPDM/PP + thermal shock-resistant ceramic composites
  47. Characterization of orientation in polyethylene by scratch testing
  48. Effect of marble particle size and gamma irradiation on mechanical properties of polymer concrete
  49. Wear Resistance and Wear Mechanisms in Polymer + Metal Composites
  50. Surface and electrical properties of high density polyethylene + carbon black composites near the percolation threshold
  51. Modified epoxy coatings on mild steel: Tribology and surface energy
  52. Copper viscoelasticity manifested in scratch recovery
  53. Scratch Resistance of Polycarbonate Containing ZnO Nanoparticles: Effects of Sliding Direction
  54. Separation of natural trivalent oxides of arsenic and antimony
  55. Rheology of low-density polyethylene + Boehmite composites
  56. Preface
  57. Effect of different types of peroxides on properties of vulcanized EPDM + PP blends
  58. Brittleness of materials: implications for composites and a relation to impact strength
  59. Polymer concretes improved by fiber reinforcement and gamma irradiation
  60. Accuracy in locating glass transitions: aging and gamma sterilization of vulcanized thermoplastic elastomers
  61. Glass transitions in binary drug+polymer systems
  62. Swelling and network parameters of crosslinked porous octadecyl acrylate copolymers as oil spill sorbers
  63. Reinforcement of Polymeric Latexes by In Situ Polymerization
  64. Thermomechanical processing environment and morphology development of a thermotropic polymer liquid crystal
  65. Modification of an epoxy resin with a fluoroepoxy oligomer for improved mechanical and tribological properties
  66. Tribological properties of LDPE + Boehmite composites
  67. Effect of the type of carbon nanotubes on tribological properties of polyamide 6
  68. Tribological Properties of Epoxy+Silica Hybrid Materials
  69. Gamma‐irradiation effects on polypropylene‐based composites with and without an internal lubricant
  70. Preparation and Characterization of Poly(Lactic Acid)‐g‐Maleic Anhydride + Starch Blends
  71. Reliability and prediction of long-term performance of polymer-based materials
  72. Synthesis and Characterization of Poly(methyl acrylate) + SiO2 Hybrids
  73. Polypropylene + Polystyrene Blends with a Compatibilizer. Part I. Morphology and Thermophysical Properties
  74. Polypropylene + Polystyrene Blends with a Compatibilizer. Part 2. Tribological and Mechanical Properties
  75. Glass transition temperatures in binary polymer blends
  76. Tribology of polymer-based materials (PBMs)
  77. Effects of γ radiation on fiber‐reinforced polymer concrete
  78. Characterization of grooves in scratch resistance testing
  79. Predicting wear from mechanical properties of thermoplastic polymers
  80. Compressive strength of gamma‐irradiated polymer concrete
  81. Microhybrids of metal powder incorporated in polymeric matrices: Friction, mechanical behavior, and microstructure
  82. Effects of surface plasma treatment on tribology of thermoplastic polymers
  83. Settling rates for flocculation of iron and manganese ore‐containing suspensions by cationic glycogen
  84. Tensile properties of LDPE + Boehmite composites
  85. Drag reduction in flow: Review of applications, mechanism and prediction
  86. Porous hydroxyapatite-based obturation materials for dentistry
  87. Prediction of glass transition temperatures: Binary blends and copolymers
  88. Scratch and Wear Resistance of Polyamide 6 Reinforced with Multiwall Carbon Nanotubes
  89. Author
  90. Long-term irradiation effects on gamma-irradiated Nylon 6,12 fibers
  91. Importance of Tribology in Engineering Design
  92. Tribological properties of blends of melamine‐formaldehyde resin with low density polyethylene
  93. Concrete + polyester + CaCO3: Mechanics and morphology after gamma irradiation
  94. Poly(methyl acrylate) plus Mesoporous Silica Nanohybrids: Mechanical and Thermophysical Properties
  95. Synthesis and Characterization of Porous Crosslinked Copolymers for Oil Spill Sorption
  96. A model of flocculation
  97. Grooves in scratch testing
  98. Novel wear resistant and low toxicity dental obturation materials
  99. Nanoindentation creep and glass transition temperatures in polymers
  100. Polymer tribology in safety medical devices: Retractable syringes
  101. Focused ion beam milling and scanning electron microscopy characterization of polymer+metal hybrids
  102. Formation of polymethylsiloxanes with alkyl side groups
  103. Mechanical Properties
  104. Polymer Liquid Crystals and Their Blends
  105. Lowering mechanical degradation of drag reducers in turbulent flow
  106. Sliding wear, viscoelasticity, and brittleness of polymers
  107. Computer simulations of true stress development and viscoelastic behavior in amorphous polymeric materials
  108. POLYCHAR-13 Annual World Forum on Advanced Materials in 2005
  109. Thermophysical Properties and Molecular Relaxations in Cured Epoxy Resin + PEO Blends: Observations on Factors Controlling Miscibility
  110. Characterization Of Epoxy Curing Using High Heating Rate DSC
  111. Concrete reinforced with irradiated nylon fibers
  112. Molecular dynamics simulations of polymer viscoelasticity: effect of the loading conditions and creep behaviour
  113. Scratch velocity and wear resistance
  114. Wear of thermoplastics determined by multiple scratching
  115. Dielectric properties of cured epoxy resin+poly(ethylene oxide) blends
  116. Effects of carbon black on tribology of blends of poly(vinylidene fluoride) with irradiated and non-irradiated ultrahigh molecular weight polyethylene
  117. Friction and multiple scratch behavior of polymer+monomer liquid crystal systems
  118. Mechanical improvement of concrete by irradiated polypropylene fibers
  119. Tribological properties of perfluoralkylethyl methacrylate-polymethyl methacrylate copolymer thin films
  120. Application of dynamic mechanical analysis techniques to bismuth telluride based thermoelectric materials
  121. Determination of wear of surfaces by scratch testing
  122. Molecular deformation mechanisms and mechanical properties of polymers simulated by molecular dynamics
  123. EPOXY + FLUOROPOLYMER SYSTEMS: NANOSCALE SURFACE ORGANIZATION AND SCRATCH RESISTANCE
  124. Structural characterization of α‐ and β‐nucleated isotactic polypropylene
  125. Morphological features and mechanical behavior of one- and two-phase polymeric materials simulated by molecular dynamics
  126. A statistical-mechanical model of polymer liquid crystals subjected to external deformations
  127. Thermoplastic elastomers from rubber and recycled polyethylene: chemical reactions at interphases for property enhancement
  128. Friction and Scratch Resistance of Polymer Liquid Crystals: Effects of Magnetic Field Orientation
  129. Mechanical Performance of Plastics
  130. Morphology and thermal properties of two polymethacrylates modified by a polymer liquid crystal
  131. Tribological Behavior of Polymers Simulated by Molecular Dynamics
  132. Pressure–volume–temperature properties of an epoxy+fluorinated poly(aryl ether ketone) system
  133. POLY(ETHYLENE TEREPHTALATE)-CONTAINING POLYMER LIQUID CRYSTALS AND THEIR BLENDS
  134. Polymer resins with epoxy end groups obtained from hydrocarbon pyrolysis C9 fraction
  135. Connection of surface tension with multiple tribological properties in epoxy + fluoropolymer systems
  136. Pressure–volume–temperature (P–V–T) properties of GexSe1−x inorganic polymeric glasses
  137. Creep of PVDF monofilament sutures: service performance prediction from short-term tests
  138. Cure progress in epoxy systems: dependence on temperature and time
  139. Synthesis and characterization of petroleum resins with epoxy groups
  140. Separation of gelation from vitrification in curing of a fiber‐reinforced epoxy composite
  141. Mechanical properties of glass fiber composites with an epoxy resin modified by a liquid crystalline epoxy
  142. Effects of fluoropolymer addition to an epoxy on scratch depth and recovery
  143. Time–temperature correspondence prediction of stress relaxation of polymeric materials from a minimum of data
  144. Synthesis and properties of peroxy derivatives of epoxy resins based on Bisphenol A: Effects of the presence of boron trifluoride ethereate
  145. POLYCHAR-9 Worldwide Forum on Polymer Applications and Theory in 2001
  146. Functional peroxides and peroxy oligoesters on the basis of pyromellitic dianhydride
  147. Effects of magnetic fields on flexural properties of a longitudinal polymer liquid crystal
  148. Crack Formation and Propagation in Molecular Dynamics Simulations of Polymer Liquid Crystals
  149. Theory of thermotropic polymer liquid crystals
  150. Prediction of long‐term service performance of polymeric materials from short‐term tests: Creep and prediction of the stress shift factor of a longitudinal polymer liquid crystal
  151. The Influence of External Electric Field on Local Orientations and Phase Transitions in Polymer Liquid Crystals (PLCs)
  152. Instruction in materials science and engineering: modern technology and the new role of the teacher
  153. Effects of glass fibers and polypropylene/glass fiber hybrid fibers on the kinetics and mechanical properties of epoxy composites
  154. Orientations and phase transitions in liquid crystals consisting of short linear polymer chains
  155. Thermomechanical Characterization of Bismuth Telluride Based Thermoelectric Materials
  156. Preface
  157. Mechanisms of Orientation of Polymer Liquid Crystals (PLCs) in External Fields
  158. Thermal expansivity and thermal conductivity of amorphous thermoplastic polyimide and polymer liquid crystal blends
  159. Epoxy networks modified by unsaturated oligoesters and acrylates or methacrylates
  160. International forum on polymers 1999: POLYCHAR‐7
  161. Conformational transformations in chiral polythiophene derivatives aggregated in polymethacrylate matrices: Experiments and molecular dynamics simulations
  162. Synthesis of hydroxyapatite from eggshells
  163. Poly(acrylic acid) + zinc diacetate composites: High temperature service and electric conductivity
  164. Synthesis and prperties of peroxy derivatives of epoxy resins based on Bisphenol A. 1. Effects of the presence of inorganic bases
  165. Creep and stress relaxation in a longitudinal polymer liquid crystal: Prediction of the temperature shift factor
  166. Drag reduction and solvation in polymer solutions
  167. P-V-T data and their uses
  168. Thermal Wave Imaging of Propagating Cracks in Polypropylene and a Thermoplastic Olefin
  169. P-V-T relations in a series of longitudinal polymer liquid crystals with varying mesogen concentration
  170. Voronoi polyhedra and Delaunay simplexes in the structural analysis of molecular-dynamics-simulated materials
  171. Orientations and phase transitions in uncrosslinked and crosslinked polymer liquid crystals
  172. Cowoven polypropylene/glass composites with polypropylene + polymer liquid crystal interlayers: Dynamic mechanical and thermal analysis
  173. Mechanical and Thermophysical Properties of Polymer Liquid Crystals
  174. Computer simulations
  175. Effect of γ-Radiation on Isothermal Crystallization of Polypropylene
  176. Semicrystalline thermoplastic polyimide + polymer liquid crystal blends: Nonisothermal calorimetry and thermogravimetry
  177. Evaluation of Potential Printed Wiring Board Materials: Thermoplastic Polyimide + Polymer Liquid Crystal Blends
  178. Preface. International forum on polymers: Status report 1996
  179. Structures of Blends of Poly (p-Phenylene Sulfide) (PPS) with Poly(p-Phenylene Sulfide Ether) (PPSE)
  180. Synthesis and Thermal Properties of Poly(ethynyldimethylsilane-co-dimethylsiloxanes)
  181. International forum on polymers: Status report 1996
  182. Polydisperse polymer liquid crystals near the anisotropic‐isotropic transition
  183. Computer simulations of chain conformations in dilute polymer solutions under shear flow
  184. Statistical thermodynamics of polymer liquid crystals: Competition between energetic and entropic effects
  185. Preface. International forum on polymers—1995: Part II
  186. Epoxy and glass composites in water studied with 2H‐NMR
  187. Rheological properties and morphology of binary blends of a longitudinal polymer liquid crystal with engineering polymers
  188. Nonisothermal thermophysical evaluation of a polypropylene + ethylene propylene diene (EPDM) blend
  189. Blends of a longitudinal polymer liquid crystal with polycarbonate: relation of the phase diagram to mechanical properties
  190. International forum on polymers—1995: Part I
  191. Dielectric and Mechanical Relaxation in the Blends of a Polymer Liquid Crystal with Polycarbonate
  192. Stress relaxation: Experiment, theory, and computer simulation
  193. Mechanics of failure of plastics by thermal imaging examination of a thermoplastic polypropylene + EPDM blend
  194. Chain overlap and entanglements in dilute polymer solutions: Brownian dynamics simulation
  195. Thermal studies of blends of poly(phenylene sulfide) (PPS) with poly(phenylene sulfide sulfone) (PPSS) and with poly(phenylene sulfide ether) (PPSE)
  196. Tensile, stress relaxation and dynamic mechanical behaviour of polyethylene crystallized from highly deformed melts
  197. Monodisperse Polymer Liquid Crystals near the Anisotropic-Isotropic Transition
  198. Phase Structures and Phase Diagrams in Polymer Liquid-Crystal Systems: copolymers of Poly(ethylene terephthalate) and p-Hydroxybenzoic acid
  199. Molecular-dynamics simulations of stress relaxation in metals and polymers
  200. The influence of interphases on properties of epoxy resin composites
  201. Light scattering spectra of some natural biopolymers
  202. Internal friction in two longitudinal polymer liquid crystal esters
  203. Molecular-dynamics simulation of stress relaxation on a triangular lattice
  204. Stress Relaxation In Metals And Polymers: Theory, Experiment And Computer Simulations
  205. Thermal behaviour of poly (phenylene sulfide) and its derivatives
  206. Computer simulation of stress relaxation
  207. Statistical thermodynamics of polymer liquid crystals: variation of concentration of the mesogenic component
  208. Solubility and miscibility in ternary systems: polymer liquid crystal + flexible polymer + solvent
  209. An Introduction to Liquid Crystallinity
  210. Failure of plastics. Edited by Witold Brostow and Roger D. Corneliussen Carl Hanser Verlag, Munich, 1989. pp. i + 486, price DM248.00. ISBN 3–446–14199–5
  211. Thermally stimulated depolarization of a copolymer of poly(ethylene terephthalate) and p-hydroxybenzoic acid
  212. Molecular dynamics simulations of chain relaxation and crack propagation in polymer liquid crystals
  213. Chain relaxation capability and service life of polymeric materials
  214. Slow crack propagation in polyethylene: determination and prediction
  215. Polymer Liquid Crystals and Their Blends: A Hierarchy of Structures
  216. Parameters of equation of state of polyurethanes from acoustic resonance and isobaric expansivity
  217. Distinguishing liquids from amorphous solids: Percolation analysis on the Voronoi network
  218. Flow of dilute polymer solutions: chain conformations and degradation of drag reducers
  219. The phenomenological theory of linear viscoelastic behavior
  220. Blending of Polymer Liquid Crystals with Engineering Polymers
  221. Properties of polymer liquid crystals: choosing molecular structures and blending
  222. Impact transition temperatures and polymer densities
  223. Integration of fundamental polymer science and technology, volume 2
  224. Equilibrium and Non-Equilibrium Phases and Phase Diagrams in Blends of Polymer Liquid Crystals with Enoineerino Polymers
  225. Structure and Properties of Blends of Polycarbonate and Poly(Ethylene-Terephthalate-Co-p-Hydroxybenzoate): Phase Diagram and Mechanical Behavior
  226. Transmission of mechanical energy through polymeric liquid crystals and their blends
  227. Mechanical And Thermophysical Properties Of Polymers And Chemical Structure: From Computer Simulations To Experimental Data
  228. Failure of plastics, by Witold Brostow and Roger Corneliussen, Hanser Macmillan, New York and West Germany, 1986, 486 pp. Price: $119.50
  229. Temperature dependence of liquid density: The choice of a reference state
  230. Nondestructive methods for material property determination
  231. 19 June 1910 – 8 September 1985
  232. Impact energy and rapid crack propagation in plastic pipes
  233. Effects of Free Volume on Stress Relaxation with Bond Breaking in Polymeric Materials
  234. Scaling Pressures for Applications in Equations of State and Nonequilibrium Properties
  235. Temperature shift factor: Polymer mechanical properties above and below glass transition
  236. Mechanical fragmentation, Voronoi polyhedra and the theory of information
  237. Enthalpies of sublimation: Experimental data for aminopyridines and a predictive scheme for organic compounds
  238. Microcomputers in Teching Materials Science and Engineering: TK! Solver Models
  239. Volumetric properties of organic liquids as a function of temperature and pressure: Experimental data and prediction of compressibility
  240. Kriometric determination of purity of materials forming solid solutions with their contaminants
  241. Isobaric expansivity of liquids and its dependence on temperature
  242. Evaluation of Biopolymer Conformations: Substituent Electronegativity in Nucleosides
  243. Macromolecular conformations in solutions. I. Model for chains with partial flexibility
  244. Macromolecular conformations in solutions. II. Thermodynamics of interactions
  245. Prediction of Polymer Solution Properties from a Model of Chain Conformations and Interactions
  246. Prediction of Solid + Liquid Equilibrium Diagrams for Binary Mixtures Forming Solid Solutions with an Extremum
  247. Monte Carlo Simulation of Fluid Krypton
  248. Calculation of impact transition temperature of low density polyethylene from shift factor via a free volume approach
  249. Properties of Mixtures of Alkane Chains Predicted without Combining Rules
  250. Free volume in condensed phases: Separation of contributions
  251. Pressure second virial coefficients of hydrocarbons, fluorocarbons, and their mixtures: Interactions of walks
  252. Science of materials, Witold Brostow, wiley‐interscience, New York, 1979, 436 pp. price: $29.50
  253. The particle scattering factor of branched macromolecules: computer simulation
  254. Construction of Voronoi polyhedra
  255. Evaluation Variables in Personalized Teaching and the Sharing of Records with Students
  256. Radial distribution function peaks and coordination numbers in liquids and in amorphous solids
  257. Cis-trans equilibriums of 1-chloropropene in organic solvents
  258. Analytical formula for the radial distribution function
  259. Prediction of thermodynamic properties of ternary liquid solutions including metal alloys
  260. Thermal neutron scattering by liquid argon and the intermolecular potential
  261. Experimental volumetric properties of liquid n-alkanes and their binary mixtures
  262. Some properties of the informational model of the liquid state
  263. Letter to the Editor
  264. On interesting walks in a graph
  265. Equilibrium properties in the liquid state from interactions of walks
  266. Vapor-liquid equilibriums of binary mixtures of carbon-14-labeled hexane with aliphatic ketones
  267. On Swelling of Natural Rubber in Organic Solvents
  268. Characterization Of Epoxy Curing Using High Heating Rate DSC