Contact

All Stories

  1. Manufacturing and characterisation of 3D-printed sustained-release Timolol implants for glaucoma treatment

    Article • Drug Delivery and Translational Research, April 2024, Springer Science + Business Media

    Prof Dimitrios A. Lamprou

  2. Co-delivery of VEGF and amoxicillin using LP-coated co-axial electrospun fibres for the potential treatment of diabetic wounds

    Article • Biomaterials Advances, April 2024, Elsevier

    Prof Dimitrios A. Lamprou

  3. Conventional vs PEGylated loaded liposomal formulations by microfluidics for delivering hydrophilic chemotherapy

    Article • International Journal of Pharmaceutics, April 2024, Elsevier

    Prof Dimitrios A. Lamprou

  4. Biopolymeric 3D printed implantable scaffolds as a potential adjuvant treatment for acute post-operative pain management

    Article • Expert Opinion on Drug Delivery, March 2024, Taylor & Francis

    Prof Dimitrios A. Lamprou

  5. Application of 3D printing in early phase development of pharmaceutical solid dosage forms

    Article • International Journal of Pharmaceutics, March 2024, Elsevier

    Prof Dimitrios A. Lamprou

  6. 3D-printed hydrogels based on amphiphilic chitosan derivative loaded with levofloxacin for wound healing applications

    Article • International Journal of Polymeric Materials, February 2024, Taylor & Francis

    Prof Dimitrios A. Lamprou

  7. Electrospinning technologies for the delivery of Biopharmaceuticals: Current status and future trends

    Article • International Journal of Pharmaceutics, February 2024, Elsevier

    Prof Dimitrios A. Lamprou

  8. Liposomal encapsulation of amoxicillin via microfluidics with subsequent investigation of the significance of PEGylated therapeutics

    Article • International Journal of Pharmaceutics, January 2024, Elsevier

    Prof Dimitrios A. Lamprou

  9. 3D-printed solid oral dosage forms for mental and neurological disorders: recent advances and future perspectives

    Article • Expert Opinion on Drug Delivery, December 2023, Taylor & Francis

    Prof Dimitrios A. Lamprou

  10. Synthesis and Characterization of Paclitaxel-Loaded PEGylated Liposomes by the Microfluidics Method

    Article • Molecular Pharmaceutics, November 2023, American Chemical Society (ACS)

    Prof Dimitrios A. Lamprou

  11. Combining microfluidics and coaxial 3D-bioprinting for the manufacturing of diabetic wound healing dressings

    Article • Biomaterials Advances, October 2023, Elsevier

    Prof Dimitrios A. Lamprou

  12. Emerging Technologies Transforming Therapy

    Article • Journal of Medical Science, August 2023, Poznan University of Medical Sciences

    Prof Dimitrios A. Lamprou

  13. The Manufacturing and Characterisation of Eugenol-Enclosed Liposomes Produced by Microfluidic Method

    Article • Foods, August 2023, MDPI AG

    Prof Dimitrios A. Lamprou

  14. Microfluidic encapsulation of enzymes and steroids within solid lipid nanoparticles

    Article • Drug Delivery and Translational Research, July 2023, Springer Science + Business Media

    Prof Dimitrios A. Lamprou

  15. Urethane dimethacrylate-based photopolymerizable resins for stereolithography 3D printing: A physicochemical characterisation and biocompatibility evaluation

    Article • Drug Delivery and Translational Research, July 2023, Springer Science + Business Media

    Prof Dimitrios A. Lamprou

  16. 4D printed multipurpose smart implants for breast cancer management

    Article • International Journal of Pharmaceutics, July 2023, Elsevier

    Prof Dimitrios A. Lamprou

  17. Drug formulation and delivery: a UK and Ireland perspective

    Article • Drug Delivery and Translational Research, May 2023, Springer Science + Business Media

    Prof Dimitrios A. Lamprou

  18. Machine learning in additive manufacturing & Microfluidics for smarter and safer drug delivery systems

    Article • International Journal of Pharmaceutics, April 2023, Elsevier

    Prof Dimitrios A. Lamprou

  19. Clinical, pharmacological, and formulation evaluation of disulfiram in the treatment of glioblastoma - a systematic literature review

    Article • Expert Opinion on Drug Delivery, March 2023, Taylor & Francis

    Prof Dimitrios A. Lamprou

  20. Emerging Drug Delivery and Biomedical Engineering Technologies

    Article • February 2023, Taylor & Francis

    Prof Dimitrios A. Lamprou

  21. 3D-printed long-acting 5-fluorouracil implant to prevent conjunctival fibrosis in glaucoma

    Article • Journal of Pharmacy and Pharmacology, January 2023, Oxford University Press (OUP)

    Prof Dimitrios A. Lamprou

  22. Combining 3D Printing and Microfluidic Techniques: A Powerful Synergy for Nanomedicine

    Article • Pharmaceuticals, January 2023, MDPI AG

    Prof Dimitrios A. Lamprou

  23. Microfluidic technologies in tumour metabolism

    Article • International Journal of Pharmaceutics, December 2022, Elsevier

    Prof Dimitrios A. Lamprou

  24. 3D printed biodegradable multifunctional implants for effective breast cancer treatment

    Article • International Journal of Pharmaceutics, December 2022, Elsevier

    Prof Dimitrios A. Lamprou

  25. Exploration of Dual Ionic Cross-Linked Alginate Hydrogels Via Cations of Varying Valences towards Wound Healing

    Article • Polymers, November 2022, MDPI AG

    Prof Dimitrios A. Lamprou

  26. In-House Innovative “Diamond Shaped” 3D Printed Microfluidic Devices for Lysozyme-Loaded Liposomes

    Article • Pharmaceutics, November 2022, MDPI AG

    Prof Dimitrios A. Lamprou

  27. Microfluidic paclitaxel-loaded lipid nanoparticle formulations for chemotherapy

    Article • International Journal of Pharmaceutics, November 2022, Elsevier

    Prof Dimitrios A. Lamprou

  28. High spatial resolution ToF-SIMS imaging and image analysis strategies to monitor and quantify early phase separation in amorphous solid dispersions

    Article • International Journal of Pharmaceutics, November 2022, Elsevier

    Prof Dimitrios A. Lamprou

  29. 3D Bioprinted Chitosan-Based Hydrogel Scaffolds in Tissue Engineering and Localised Drug Delivery

    Article • Pharmaceutics, September 2022, MDPI AG

    Prof Dimitrios A. Lamprou

  30. 3D printing in Ophthalmology: From medical implants to personalised medicine

    Article • International Journal of Pharmaceutics, September 2022, Elsevier

    Prof Dimitrios A. Lamprou

  31. Effect of preparation method on alginate wafer properties

    Article • Journal of Applied Polymer Science, July 2022, Wiley

    Prof Dimitrios A. Lamprou

  32. 3D and 4D Printing in the Fight against Breast Cancer

    Article • Biosensors, July 2022, MDPI AG

    Prof Dimitrios A. Lamprou

  33. Emerging technologies for combating pandemics

    Article • Expert Review of Medical Devices, July 2022, Taylor & Francis

    Prof Dimitrios A. Lamprou

  34. The sustainability of emerging technologies for use in pharmaceutical manufacturing

    Article • Expert Opinion on Drug Delivery, June 2022, Taylor & Francis

    Prof Dimitrios A. Lamprou

  35. Development of Geraniol-Loaded Liposomal Nanoformulations against Salmonella Colonization in the Pig Gut

    Article • Journal of Agricultural and Food Chemistry, June 2022, American Chemical Society (ACS)

    Prof Dimitrios A. Lamprou

  36. Comprehensive review on novel targets and emerging therapeutic modalities for pulmonary arterial Hypertension

    Article • International Journal of Pharmaceutics, June 2022, Elsevier

    Prof Dimitrios A. Lamprou

  37. Stereolithography 3D printed implants: A preliminary investigation as potential local drug delivery systems to the ear

    Article • International Journal of Pharmaceutics, March 2022, Elsevier

    Prof Dimitrios A. Lamprou

  38. Microfluidic-mediated self-assembly of phospholipids for the delivery of biologic molecules

    Article • International Journal of Pharmaceutics, January 2022, Elsevier

    Prof Dimitrios A. Lamprou

  39. Microfluidics Technology for the Design and Formulation of Nanomedicines

    Article • Nanomaterials, December 2021, MDPI AG

    Prof Dimitrios A. Lamprou

  40. Review of polymer and ceramic coatings used in medicine

    Article • Transactions of the IMF, December 2021, Taylor & Francis

    Dr James R Smith, Prof Dimitrios A. Lamprou

  41. Melt-extrusion 3D printing of resorbable levofloxacin-loaded meshes: Emerging strategy for urogynaecological applications

    Article • Materials Science and Engineering C, December 2021, Elsevier

    Prof Dimitrios A. Lamprou

  42. Optimization of Printing Parameters for Digital Light Processing 3D Printing of Hollow Microneedle Arrays

    Article • Pharmaceutics, November 2021, MDPI AG

    Prof Dimitrios A. Lamprou

  43. Fused deposition modelling 3D printing proof-of-concept study for personalised inner ear therapy

    Article • Journal of Pharmacy and Pharmacology, October 2021, Oxford University Press (OUP)

    Prof Dimitrios A. Lamprou

  44. Optimization of FDM 3D printing process parameters to produce haemodialysis curcumin-loaded vascular grafts

    Article • Drug Delivery and Translational Research, October 2021, Springer Science + Business Media

    Prof Dimitrios A. Lamprou

  45. Development of drug loaded cardiovascular prosthesis for thrombosis prevention using 3D printing

    Article • Materials Science and Engineering C, October 2021, Elsevier

    Prof Dimitrios A. Lamprou

  46. 3D Printing: an appealing technology for the manufacturing of solid oral dosage forms

    Article • Journal of Pharmacy and Pharmacology, September 2021, Oxford University Press (OUP)

    Prof Dimitrios A. Lamprou

  47. Frog nest foams exhibit pharmaceutical foam-like properties

    Article • Royal Society Open Science, September 2021, Royal Society Publishing

    Prof Dimitrios A. Lamprou

  48. Recent advances in electrospun nanofiber vaginal formulations for women's sexual and reproductive health

    Article • International Journal of Pharmaceutics, September 2021, Elsevier

    Prof Dimitrios A. Lamprou

  49. Manufacturing of 3D-Printed Microfluidic Devices for the Synthesis of Drug-Loaded Liposomal Formulations

    Article • International Journal of Molecular Sciences, July 2021, MDPI AG

    Prof Dimitrios A. Lamprou

  50. The Present and Future Role of Microfluidics for Protein and Peptide-Based Therapeutics and Diagnostics

    Article • Applied Sciences, April 2021, MDPI AG

    Prof Dimitrios A. Lamprou

  51. In vitro in vivo relations for the parenteral liposomal formulation of Amphotericin B: A biorelevant and clinically relevant approach

    Article • European Journal of Pharmaceutics and Biopharmaceutics, February 2021, Elsevier

    Prof Dimitrios A. Lamprou

  52. In vitro - in vivo relations for the parenteral liposomal formulation of Amphotericin B: A clinically relevant approach with PBPK modeling

    Article • European Journal of Pharmaceutics and Biopharmaceutics, February 2021, Elsevier

    Prof Dimitrios A. Lamprou

  53. 3D printed estradiol-eluting urogynecological mesh implants: Influence of material and mesh geometry on their mechanical properties

    Article • International Journal of Pharmaceutics, January 2021, Elsevier

    Prof Dimitrios A. Lamprou

  54. Long-acting implantable devices for the prevention and personalised treatment of infectious, inflammatory and chronic diseases

    Article • Journal of Drug Delivery Science and Technology, December 2020, Elsevier

    Prof Dimitrios A. Lamprou

  55. Blood extracellular vesicles from healthy individuals regulate hematopoietic stem cells as humans age

    Article • Aging Cell, October 2020, Wiley

    Prof Dimitrios A. Lamprou

  56. Novel combination of non-invasive morphological and solid-state characterisation of drug-loaded core-shell electrospun fibres

    Article • International Journal of Pharmaceutics, September 2020, Elsevier

    Prof Dimitrios A. Lamprou

  57. Emerging technologies for diagnostics and drug delivery in the fight against COVID-19 and other pandemics

    Article • Expert Review of Medical Devices, July 2020, Taylor & Francis

    Prof Dimitrios A. Lamprou

  58. Poly(caprolactone)-Based Coatings on 3D-Printed Biodegradable Implants: A Novel Strategy to Prolong Delivery of Hydrophilic Drugs

    Article • Molecular Pharmaceutics, July 2020, American Chemical Society (ACS)

    Prof Dimitrios A. Lamprou

  59. Urogynecological surgical mesh implants: New trends in materials, manufacturing and therapeutic approaches

    Article • International Journal of Pharmaceutics, July 2020, Elsevier

    Prof Dimitrios A. Lamprou

  60. 3D Printing of Pharmaceuticals and Drug Delivery Devices

    Article • July 2020, MDPI AG

    Prof Dimitrios A. Lamprou

  61. Recent Developments in Microfluidic Technologies for Central Nervous System Targeted Studies

    Article • Pharmaceutics, June 2020, MDPI AG

    Prof Dimitrios A. Lamprou

  62. Additive Manufacturing Can Assist in the Fight Against COVID-19 and Other Pandemics and Impact on the Global Supply Chain

    Article • 3D Printing and Additive Manufacturing, June 2020, Mary Ann Liebert Inc

    Prof Dimitrios A. Lamprou

  63. 3D Printing of Pharmaceuticals and Drug Delivery Devices

    Article • Pharmaceutics, March 2020, MDPI AG

    Prof Dimitrios A. Lamprou

  64. Development of a Biodegradable Subcutaneous Implant for Prolonged Drug Delivery Using 3D Printing

    Article • Pharmaceutics, January 2020, MDPI AG

    Prof Dimitrios A. Lamprou

  65. 3D Printing of Drug-Loaded Thermoplastic Polyurethane Meshes: A Potential Material for Soft Tissue Reinforcement in Vaginal Surgery

    Article • Pharmaceutics, January 2020, MDPI AG

    Prof Dimitrios A. Lamprou

  66. Recent Development of Electrospinning for Drug Delivery

    Article • Pharmaceutics, December 2019, MDPI AG

    Prof Dimitrios A. Lamprou

  67. Synthesis, Characterization, and Drug Delivery Application of Self-assembling Amphiphilic Cyclodextrin

    Article • AAPS PharmSciTech, December 2019, Springer Science + Business Media

    Prof Dimitrios A. Lamprou

  68. Microfluidic encapsulation method to produce stable liposomes containing iohexol

    Article • Journal of Drug Delivery Science and Technology, December 2019, Elsevier

    Prof Dimitrios A. Lamprou

  69. How innovative drug delivery devices can help realize clinical utility of new effective therapies

    Article • Expert Opinion on Drug Delivery, November 2019, Taylor & Francis

    Prof Dimitrios A. Lamprou

  70. Fused Deposition Modeling as an Effective Tool for Anti-Infective Dialysis Catheter Fabrication

    Article • ACS Biomaterials Science & Engineering, September 2019, American Chemical Society (ACS)

    Prof Dimitrios A. Lamprou

  71. 3D printed microneedle patches using stereolithography (SLA) for intradermal insulin delivery

    Article • Materials Science and Engineering C, September 2019, Elsevier

    Prof Dimitrios A. Lamprou

  72. Fused Deposition Modelling as a Potential Tool for Antimicrobial Dialysis Catheters Manufacturing: New Trends vs. Conventional Approaches

    Article • Coatings, August 2019, MDPI AG

    Prof Dimitrios A. Lamprou

  73. On the issue of transparency and reproducibility in nanomedicine

    Article • Nature Nanotechnology, July 2019, Springer Science + Business Media

    Prof. Hélder Santos, Prof. Iseult Lynch, Prof Dimitrios A. Lamprou, Ruth Schmid

  74. The impact of channel fill level on internal forces during continuous twin screw wet granulation

    Article • International Journal of Pharmaceutics, March 2019, Elsevier

    Prof Dimitrios A. Lamprou

  75. Biological Performance of Electrospun Polymer Fibres

    Article • Materials, January 2019, MDPI AG

    Prof Dimitrios A. Lamprou

  76. How atomic force microscopy is being used to investigate drug delivery vehicles

    Article • Expert Opinion on Drug Delivery, November 2018, Taylor & Francis

    Dr James R Smith, Prof Dimitrios A. Lamprou

  77. A Novel PAA Derivative with Enhanced Drug Efficacy in Pancreatic Cancer Cell Lines

    Article • Pharmaceuticals, September 2018, MDPI AG

    Prof Dimitrios A. Lamprou

  78. Implication of linker length on cell cytotoxicity, pharmacokinetic and toxicity profile of gemcitabine-docetaxel combinatorial dual drug conjugate

    Article • International Journal of Pharmaceutics, September 2018, Elsevier

    Prof Dimitrios A. Lamprou

  79. Stimuli Responsive Polymeric Systems for Cancer Therapy

    Article • Pharmaceutics, August 2018, MDPI AG

    Prof Dimitrios A. Lamprou

  80. Co-delivery of docetaxel and gemcitabine by anacardic acid modified self-assembled albumin nanoparticles for effective breast cancer management

    Article • Acta Biomaterialia, June 2018, Elsevier

    Prof Dimitrios A. Lamprou

  81. 3D printed microneedles for insulin skin delivery

    Article • International Journal of Pharmaceutics, June 2018, Elsevier

    Prof Dimitrios A. Lamprou

  82. 3D printing applications for transdermal drug delivery

    Article • International Journal of Pharmaceutics, June 2018, Elsevier

    Prof Dimitrios A. Lamprou

  83. Probing polydopamine adhesion to protein and polymer films: microscopic and spectroscopic evaluation

    Article • Journal of Materials Science, November 2017, Springer Science + Business Media

    Prof Dimitrios A. Lamprou

  84. Electrospun collagen-based nanofibres: A sustainable material for improved antibiotic utilisation in tissue engineering applications

    Article • International Journal of Pharmaceutics, October 2017, Elsevier

    Charles I Oseghale, PhD, Prof Dimitrios A. Lamprou

  85. Understanding the compaction behaviour of low-substituted HPC: macro, micro, and nano-metric evaluations

    Article • Pharmaceutical Development and Technology, August 2017, Taylor & Francis

    Prof Dimitrios A. Lamprou

  86. Novel Gemcitabine Conjugated Albumin Nanoparticles: a Potential Strategy to Enhance Drug Efficacy in Pancreatic Cancer Treatment

    Article • Pharmaceutical Research, August 2017, Springer Science + Business Media

    Prof Dimitrios A. Lamprou

  87. A novel methodology to study polymodal particle size distributions produced during continuous wet granulation

    Article • International Journal of Pharmaceutics, March 2017, Elsevier

    Prof Dimitrios A. Lamprou

  88. Correction to Thermoresponsive Polymer Micropatterns Fabricated by Dip-Pen Nanolithography for a Highly Controllable Substrate with Potential Cellular Applications

    Article • ACS Applied Materials & Interfaces, February 2017, American Chemical Society (ACS)

    Prof Dimitrios A. Lamprou

  89. Microfluidic manufacturing of phospholipid nanoparticles: Stability, encapsulation efficacy, and drug release

    Article • International Journal of Pharmaceutics, January 2017, Elsevier

    Prof Dimitrios A. Lamprou

  90. Fabrication and characterisation of drug-loaded electrospun polymeric nanofibers for controlled release in hernia repair

    Article • International Journal of Pharmaceutics, January 2017, Elsevier

    Prof Dimitrios A. Lamprou

  91. Polymeric Coatings and Their Fabrication for Medical Devices

    Article • January 2017, Elsevier

    Prof Dimitrios A. Lamprou

  92. Isatin thiosemicarbazones promote honeycomb structure formation in spin-coated polymer films: concentration effect and release studies

    Article • RSC Advances, January 2017, Royal Society of Chemistry

    Prof Dimitrios A. Lamprou

  93. Experimental and computational examination of anastellin (FnIII1c)-polymer interactions

    Article • Journal of Biomedical Materials Research Part A, November 2016, Wiley

    Prof Dimitrios A. Lamprou

  94. A comparison study of the degradative effects and safety implications of UVC and 405 nm germicidal light sources for endoscope storage

    Article • Polymer Degradation and Stability, November 2016, Elsevier

    Prof Dimitrios A. Lamprou

  95. Interplay between Vacuum-Grown Monolayers of Alkylphosphonic Acids and the Performance of Organic Transistors Based on Dinaphtho[2,3-b:2′,3′-f]thieno[3,2-b]thiophene

    Article • ACS Applied Materials & Interfaces, September 2016, American Chemical Society (ACS)

    Prof Dimitrios A. Lamprou

  96. Scaling of continuous twin screw wet granulation

    Article • AIChE Journal, September 2016, Wiley

    Prof Dimitrios A. Lamprou

  97. Bioinspired Silica Offers a Novel, Green, and Biocompatible Alternative to Traditional Drug Delivery Systems

    Article • ACS Biomaterials Science & Engineering, September 2016, American Chemical Society (ACS)

    Dr Siddharth Patwardhan, Prof Dimitrios A. Lamprou

  98. Thermoresponsive Polymer Micropatterns Fabricated by Dip-Pen Nanolithography for a Highly Controllable Substrate with Potential Cellular Applications

    Article • ACS Applied Materials & Interfaces, September 2016, American Chemical Society (ACS)

    Prof Dimitrios A. Lamprou

  99. Tunable Supramolecular Hydrogels for Selection of Lineage-Guiding Metabolites in Stem Cell Cultures

    Article • Chem, August 2016, Elsevier

    Prof Dimitrios A. Lamprou

  100. A novel hot-melt extrusion formulation of albendazole for increasing dissolution properties

    Article • International Journal of Pharmaceutics, February 2016, Elsevier

    Prof Dimitrios A. Lamprou

  101. Importance of atomic force microscopy in pharmaceutical sciences

    Article • January 2016, Springer Science + Business Media

    Dr James R Smith, Prof Dimitrios A. Lamprou

  102. Engineering and manufacturing of pharmaceutical co-crystals: a review of solvent-free manufacturing technologies

    Article • Chemical Communications, January 2016, Royal Society of Chemistry

    Prof Dimitrios A. Lamprou

  103. Enzymatically activated emulsions stabilised by interfacial nanofibre networks

    Article • Soft Matter, January 2016, Royal Society of Chemistry

    Prof Dimitrios A. Lamprou

  104. A TiO2 - polyurethane composite as an alternative ventricular catheter material

    Article • Frontiers in Bioengineering and Biotechnology, January 2016, Frontiers

    Prof Dimitrios A. Lamprou

  105. Isatin thiosemicarbazone-blended polymer films for biomedical applications: surface morphology, characterisation and preliminary biological assessment

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Prof Dimitrios A. Lamprou

  106. Investigation of an 11 mm diameter twin screw granulator: Screw element performance and in-line monitoring via image analysis

    Article • International Journal of Pharmaceutics, December 2015, Elsevier

    Prof Dimitrios A. Lamprou

  107. Delivery of retinoic acid to LNCap human prostate cancer cells using solid lipid nanoparticles

    Article • International Journal of Pharmaceutics, September 2015, Elsevier

    Prof Dimitrios A. Lamprou

  108. Inkjet printing of insulin microneedles for transdermal delivery

    Article • Drug Delivery and Translational Research, August 2015, Springer Science + Business Media

    Prof Dimitrios A. Lamprou

  109. Influence of cholesterol on liposome stability and on in vitro drug release

    Article • Drug Delivery and Translational Research, March 2015, Springer Science + Business Media

    Prof Dimitrios A. Lamprou

  110. Sustained and controlled release of lipophilic drugs from a self-assembling amphiphilic peptide hydrogel

    Article • International Journal of Pharmaceutics, October 2014, Elsevier

    Prof Dimitrios A. Lamprou

  111. Assessment of the antigen-specific antibody response induced by mucosal administration of a GnRH conjugate entrapped in lipid nanoparticles

    Article • Nanomedicine Nanotechnology Biology and Medicine, July 2014, Elsevier

    Dr Ayman Gebril, Prof Dimitrios A. Lamprou

  112. Lipid-like Self-Assembling Peptide Nanovesicles for Drug Delivery

    Article • ACS Applied Materials & Interfaces, May 2014, American Chemical Society (ACS)

    Spyros Yannopoulos, Prof Dimitrios A. Lamprou

  113. Coatings for medical applications

    Article • Transactions of the IMF, January 2014, Taylor & Francis

    Dr James R Smith, Prof Dimitrios A. Lamprou

  114. Sirolimus Encapsulated Liposomes for Cancer Therapy: Physicochemical and Mechanical Characterization of Sirolimus Distribution within Liposome Bilayers

    Article • Molecular Pharmaceutics, November 2013, American Chemical Society (ACS)

    Dr Milan D Antonijevic, Professor Dennis Douroumis, Prof Dimitrios A. Lamprou

  115. Effect of substrate temperature on vapor-phase self-assembly of n-octylphosphonic acid monolayer for low-voltage organic thin-film transistors

    Article • Organic Electronics, October 2013, Elsevier

    Prof Dimitrios A. Lamprou

  116. Atomic Force Microscopy Images Label-Free, Drug Encapsulated Nanoparticles In Vivo and Detects Difference in Tissue Mechanical Properties of Treated and Untreated: A Tip for Nanotoxicology

    Article • PLoS ONE, May 2013, PLOS

    Prof Dimitrios A. Lamprou

  117. Towards scale-up and regulatory shelf-stability testing of curcumin encapsulated polyester nanoparticles

    Article • Drug Delivery and Translational Research, April 2013, Springer Science + Business Media

    Prof Dimitrios A. Lamprou

  118. Beta-adrenoceptor antagonists affect amyloid nanostructure; amyloid hydrogels as drug delivery vehicles

    Article • Chemical Communications, January 2013, Royal Society of Chemistry

    Prof Dimitrios A. Lamprou

  119. Interaction and destabilization of a monoclonal antibody and albumin to surfaces of varying functionality and hydrophobicity

    Article • International Journal of Pharmaceutics, November 2012, Elsevier

    Prof Dimitrios A. Lamprou

  120. Dramatic Specific-Ion Effect in Supramolecular Hydrogels

    Article • Chemistry - A European Journal, August 2012, Wiley

    Prof Dimitrios A. Lamprou

  121. Inclusion of Water Insoluble Drugs in Amorphous Silica Nanoparticles

    Article • Journal of Biomedical Nanotechnology, August 2012, American Scientific Publishers

    Professor Dennis Douroumis, Prof Dimitrios A. Lamprou

  122. Cisplatin-Tethered Gold Nanoparticles That Exhibit Enhanced Reproducibility, Drug Loading, and Stability: a Step Closer to Pharmaceutical Approval?

    Article • Inorganic Chemistry, March 2012, American Chemical Society (ACS)

    Duncan Graham, Prof Dimitrios A. Lamprou

  123. Polymer Templating of Supercooled Indomethacin for Polymorph Selection

    Article • ACS Combinatorial Science, February 2012, American Chemical Society (ACS)

    Prof Dimitrios A. Lamprou

  124. Encapsulating [FeFe]-hydrogenase model compounds in peptide hydrogels dramatically modifies stability and photochemistry

    Article • Dalton Transactions, January 2012, Royal Society of Chemistry

    Prof Dimitrios A. Lamprou

  125. Encapsulation of water insoluble drugs in mesoporous silica nanoparticles using supercritical carbon dioxide

    Article • Journal of Nanomedicine & Nanotechnology, January 2011, OMICS Publishing Group

    Prof Dimitrios A. Lamprou

  126. Preparation and characterization of ibuprofen solid lipid nanoparticles with enhanced solubility

    Article • Journal of Microencapsulation, December 2010, Taylor & Francis

    Professor Dennis Douroumis, Prof Dimitrios A. Lamprou

  127. Development of Solid Lipid Nanoparticles for Enhanced Solubility of Poorly Soluble Drugs

    Article • Journal of Biomedical Nanotechnology, December 2010, American Scientific Publishers

    Professor Dennis Douroumis, Prof Dimitrios A. Lamprou

  128. Towards the Determination of Surface Energy at the Nanoscale: A Further Assessment of the AFM-Based Approach

    Article • Journal of Advanced Microscopy Research, August 2010, American Scientific Publishers

    Dr James R Smith, Prof Dimitrios A. Lamprou

  129. Gelatine and Gelatine/Elastin Nanocomposites for Vascular Grafts: Processing and Characterization

    Article • Journal of Biomaterials Applications, June 2010, SAGE Publications

    Prof Dimitrios A. Lamprou

  130. A comparative study of surface energy data from atomic force microscopy and from contact angle goniometry

    Article • Applied Surface Science, June 2010, Elsevier

    Dr James R Smith, Prof Dimitrios A. Lamprou

  131. Self-assembled alkanethiol structures on gold: A further insight into the origins of structural rearrangement phenomena

    Article • Surface Science, March 2010, Elsevier

    Dr James R Smith, Prof Dimitrios A. Lamprou

  132. Self-assembled structures of alkanethiols on gold-coated cantilever tips and substrates for atomic force microscopy: Molecular organisation and conditions for reproducible deposition

    Article • Applied Surface Science, January 2010, Elsevier

    Dr James R Smith, Prof Dimitrios A. Lamprou

  133. Chitosan derivatives alter release profiles of model compounds from calcium phosphate implants

    Article • Carbohydrate Research, May 2009, Elsevier

    Professor Dennis Douroumis, Prof Dimitrios A. Lamprou

  134. Structural hierarchy of biomimetic materials for tissue engineered vascular and orthopedic grafts

    Article • Journal of Biomedical Materials Research Part B Applied Biomaterials, January 2008, Wiley

    Prof Dimitrios A. Lamprou