All Stories

  1. Zinc Sulfide Decorated on Nitrogen‐Doped Carbon Derived from Metal‐Organic Framework Composites for Highly Reversible Lithium‐Ion Battery Anode

    Article • ChemElectroChem, November 2019, Wiley

    Fang-Chang Tsai

  2. Bio-Inspired Stem-like Composites Based on Highly Aligned SiC Nanowires

    Article • Chemical Engineering Journal, November 2019, Elsevier

    Fang-Chang Tsai

  3. Using Methacryl-Polyhedral Oligomeric Silsesquioxane as the Thermal Stabilizer and Plasticizer in Poly(vinyl chloride) Nanocomposites

    Article • Polymers, October 2019, MDPI AG

    Fang-Chang Tsai

  4. Surface-Initiated Initiators for Continuous Activator Regeneration (SI ICAR) ATRP of MMA from 2,2,6,6–tetramethylpiperidine–1–oxy (TEMPO) Oxidized Cellulose Nanofibers for the Preparations of PMMA Nanocomposites

    Article • Polymers, October 2019, MDPI AG

    Fang-Chang Tsai

  5. MOF-Templated Synthesis of Co3O4@TiO2 Hollow Dodecahedrons for High-Storage-Density Lithium-Ion Batteries

    Article • ACS Omega, August 2019, American Chemical Society (ACS)

    Fang-Chang Tsai

  6. The synergistic effect of poly(ethylene glycol)-borate ester on the electrochemical performance of all solid state Si doped-poly(ethylene glycol) hybrid polymer electrolyte for lithium ion battery

    Article • Journal of Power Sources, May 2019, Elsevier

    Fang-Chang Tsai

  7. Flexible Epoxy Resins Formed by Blending with the Diblock Copolymer PEO-b-PCL and Using a Hydrogen-Bonding Benzoxazine as the Curing Agent

    Article • Polymers, January 2019, MDPI AG

    Fang-Chang Tsai

  8. Ligands-Coordinated Zr-Based MOF for Wastewater Treatment

    Article • Nanomaterials, August 2018, MDPI AG

    Fang-Chang Tsai

  9. Enhanced cycling performance for all-solid-state lithium ion battery with LiFePO4 composite cathode encapsulated by poly (ethylene glycol) (PEG) based polymer electrolyte

    Article • Solid State Ionics, July 2018, Elsevier

    Fang-Chang Tsai

  10. Magnetic MOF for AO7 Removal and Targeted Delivery

    Article • Crystals, June 2018, MDPI AG

    Fang-Chang Tsai

  11. Incorporation of Mn 2+ into CdSe quantum dots by chemical bath co-deposition method for photovoltaic enhancement of quantum dot-sensitized solar cells

    Article • Royal Society Open Science, March 2018, Royal Society Publishing

    Fang-Chang Tsai

  12. Green Synthesis of H3O40PW12@MIL-100(Fe): Enhanced and Selective Adsorption of Methylene Blue from Aqueous Solution

    Article • Science of Advanced Materials, February 2018, American Scientific Publishers

    Fang-Chang Tsai

  13. Effect of transition metal ions on luminescence of MOFs

    Article • MATEC Web of Conferences, January 2018, EDP Sciences

    Fang-Chang Tsai

  14. Adsorption Behavior of High Stable Zr-Based MOFs for the Removal of Acid Organic Dye from Water

    Article • Materials, February 2017, MDPI AG

    Fang-Chang Tsai

  15. A Si-doped flexible self-supporting comb-like polyethylene glycol copolymer (Si-PEG) film as a polymer electrolyte for an all solid-state lithium-ion battery

    Article • Journal of Materials Chemistry A, January 2017, Royal Society of Chemistry

    Fang-Chang Tsai

  16. Effect of surface modified kaolin on properties of polypropylene grafted maleic anhydride

    Article • Results in Physics, January 2017, Elsevier

    Fang-Chang Tsai

  17. Removal of azo dye from aqueous solution by host-guest interaction with β-cyclodextrin

    Article • January 2017, Desalination Publications

    Fang-Chang Tsai

  18. Effects of compound curing agent on the thermo-mechanical properties and structure of epoxy asphalt

    Article • International Journal of Pavement Engineering, February 2016, Taylor & Francis

    Fang-Chang Tsai

  19. Adsorptive removal of acid orange 7 from aqueous solution with metal–organic framework material, iron (III) trimesate

    Article • Desalination and Water Treatment, November 2014, Taylor & Francis

    Fang-Chang Tsai

  20. Adsorption of Methylene Orange on Embedding Carbon Nanotubes Sodium Alginate /Chitosan Gel Beads

    Article • ECS Transactions, April 2014, The Electrochemical Society

    Fang-Chang Tsai

  21. Adsorptive removal of methyl orange from aqueous solution with crosslinking chitosan microspheres

    Article • Journal of Water Process Engineering, April 2014, Elsevier

    Fang-Chang Tsai

  22. Drawing and ultimate tenacity properties of polyamide 6/attapulgite composite fibers

    Article • Journal of Applied Polymer Science, May 2012, Wiley

    Fang-Chang Tsai

  23. Drawing and ultimate tensile properties of nylon 6/nylon 6 clay composite fibers

    Article • Polymer Engineering & Science, March 2012, Wiley

    Fang-Chang Tsai

  24. Ultradrawing properties of ultrahigh-molecular-weight polyethylene/attapulgite fibers

    Article • Polymer International, March 2012, Wiley

    Fang-Chang Tsai

  25. Recovery of Gallium and Arsenic from Gallium Arsenide Waste in the Electronics Industry

    Article • CLEAN - Soil Air Water, January 2012, Wiley

    Fang-Chang Tsai

  26. Sulfonated poly(ether sulfone)/phosphotungstic acid/attapulgite composite membranes for direct methanol fuel cells

    Article • Journal of Applied Polymer Science, July 2011, Wiley

    Fang-Chang Tsai

  27. Notice of Retraction: Dye Decolorization and Dissolved Oxygen Properties of Sodium Alginate/Carbon Nanotubes Microsphere

    Article • May 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Fang-Chang Tsai

  28. Drawing and tensile properties of polyamide 6/calcium chloride composite fibers

    Article • Journal of Polymer Research, March 2011, Springer Science + Business Media

    Fang-Chang Tsai

  29. Drawing Properties of Modified Polyamide 6 Fibers

    Article • Advanced Materials Research, February 2011, Trans Tech Publications

    Fang-Chang Tsai

  30. Gallium and Arsenic Recovery from Waste Gallium Arsenide by Wet Refined Methods

    Article • Advanced Materials Research, February 2011, Trans Tech Publications

    Fang-Chang Tsai

  31. RDX Kinetic Model Evaluation by Nth Order Kinetic Algorithms and Model Simulations

    Article • Advanced Materials Research, February 2011, Trans Tech Publications

    Fang-Chang Tsai

  32. Thermal Stability Determination, Anti-Biodegradation, and Thermal Degradation of Nitrocellulose with Various Nitrogen Content by DSC and FT-IR

    Article • Advanced Materials Research, February 2011, Trans Tech Publications

    Fang-Chang Tsai

  33. Drawing and ultimate tensile properties of modified polyamide 6 fibers

    Article • Polymer Engineering & Science, January 2011, Wiley

    Fang-Chang Tsai

  34. Ultradrawing properties of ultra-high molecular weight polyethylene/functionalized carbon nanotube fibers

    Article • Polymer Engineering & Science, December 2010, Wiley

    Fang-Chang Tsai

  35. Oxygen depletion properties of glucose-grafted polyethylene resins filled with sodium ascorbate/modified iron compounds

    Article • Journal of Polymer Research, November 2010, Springer Science + Business Media

    Fang-Chang Tsai

  36. Hydrometallurgical Process for Recovery of Lithium and Cobalt from Spent Lithium-Ion Secondary Batteries

    Article • Advanced Materials Research, June 2010, Trans Tech Publications

    Fang-Chang Tsai

  37. Investigations on Preparations and Electrical Conductivity of PA-66/OMMT Nanocomposites

    Article • Advanced Materials Research, June 2010, Trans Tech Publications

    Fang-Chang Tsai

  38. Preparation and Electrical Conductivity of Composites of PA66 Filled with Carbon Nanotubes

    Article • Advanced Materials Research, December 2009, Trans Tech Publications

    Fang-Chang Tsai

  39. Sulfonated poly(ether sulfone) (SPES)/boron phosphate (BPO4) composite membranes for high-temperature proton-exchange membrane fuel cells

    Article • International Journal of Hydrogen Energy, November 2009, Elsevier

    Fang-Chang Tsai

  40. Investigation of the oxygen depletion properties of low density polyethylene resins filled with thermally stable oxygen scavengers

    Article • July 2009, SPIE

    Fang-Chang Tsai

  41. Oxygen barrier and blending properties of blown films of blends of modified polyamide and polyamide-6 clay mineral nanocomposites

    Article • Applied Clay Science, June 2009, Elsevier

    Fang-Chang Tsai

  42. Recovery and stabilization of heavy metal sludge (Cu and Ni) from etching and electroplating plants by electrolysis and sintering

    Article • Science in China Series B Chemistry, May 2009, Springer Science + Business Media

    Fang-Chang Tsai

  43. Relation of free volume and barrier properties in the miscible blends of poly(vinyl alcohol) and nylon 6-clay nanocomposites film

    Article • Journal of Membrane Science, February 2009, Elsevier

    Fang-Chang Tsai

  44. Sulfonated poly(ether sulfone)/silica composite membranes for direct methanol fuel cells

    Article • Journal of Applied Polymer Science, January 2009, Wiley

    Fang-Chang Tsai

  45. Blending properties of poly(vinyl alcohol) and nylon 6-clay nanocomposite blends

    Article • Journal of Materials Science, August 2007, Springer Science + Business Media

    Fang-Chang Tsai

  46. Gasoline Permeation Resistance of Polypropylene, Polypropylene/Ethylene Vinyl Alcohol, Polypropylene/Modified Polyamide, and Polypropylene/Blends of Modified Polyamide and Ethylene Vinyl Alcohol Containers

    Article • Journal of Polymer Research, August 2006, Springer Science + Business Media

    Fang-Chang Tsai

  47. Blending and white spirit permeation properties of the blends of modified polyamide and ethylene vinyl alcohol with varying vinyl alcohol contents

    Article • Journal of Applied Polymer Science, January 2006, Wiley

    Fang-Chang Tsai