All Stories

  1. Influence of Rapid Heat Treatment on the Photocatalytic Activity and Stability of Strontium Titanates against a Broad Range of Pollutants
  2. Binding of Ca2+ Ions to Alkylbenzene Sulfonates: Micelle Formation, Second Critical Concentration and Precipitation
  3. Facile preparation of nickel-poor layered double hydroxides from mechanochemically pretreated gibbsite with a variety of interlamellar anions and their use as catalyst precursors for CO2 hydrogenation
  4. Pure Ni-Based and Trimetallic Ni-Co-Fe Catalysts for the Dry Reforming of Methane: Effect of K Promoter and the Calcination Temperature
  5. Nickel Nanoparticles for Liquid Phase Toluene Oxidation – Phenomenon, Opportunities and Challenges
  6. Quality by Design-Driven Zeta Potential Optimisation Study of Liposomes with Charge Imparting Membrane Additives
  7. CO2 Conversion on N-Doped Carbon Catalysts via Thermo- and Electrocatalysis: Role of C–NOx Moieties
  8. Investigation of the adsorption properties of cyclic C6 molecules on h-BN/Rh(111) surface, efforts to cover the boron nitride nanomesh by graphene
  9. Niacin and niacin-pillared layered double hydroxides—Novel organocatalysts based on pyridine
  10. Preparation and characterization of MnIn-layered double hydroxides (LDHs), extension of the synthesis to fabricate MnM(III)-LDHs (M = Al, Sc, Cr, Fe, Ga), and the comparison of their photocatalytic and catalytic activities in the oxidation of hydroquinone
  11. Preparation of TiO2–MoO3 composite nanofibers by water-based electrospinning process and their application in photocatalysis
  12. Functionalized Mesoporous Silica Nanoparticles for Drug-Delivery to Multidrug-Resistant Cancer Cells
  13. Thermal Conductivity Enhancement of Atomic Layer Deposition Surface-Modified Carbon Nanosphere and Carbon Nanopowder Nanofluids
  14. Conversion Study on the Formation of Mechanochemically Synthesized BaTiO3
  15. Palladium Decorated N-Doped Carbon Foam as a Highly Active and Selective Catalyst for Nitrobenzene Hydrogenation
  16. Dependence of Photocatalytic Activity on the Morphology of Strontium Titanates
  17. Effect of Excess B in Ni2P-Coated Boron Nitride on the Photocatalytic Hydrogen Evolution from Water Splitting
  18. Morphological aspects determine the catalytic activity of porous hydrocalumites: the role of the sacrificial templates
  19. Pharmaceutical Development and Design of Thermosensitive Liposomes Based on the QbD Approach
  20. In Vitro Comparative Study of Solid Lipid and PLGA Nanoparticles Designed to Facilitate Nose-to-Brain Delivery of Insulin
  21. Optimization of layering technique and secondary structure analysis during the formulation of nanoparticles containing lysozyme by quality by design approach
  22. Electronic work function modulation of phosphorene by thermal oxidation
  23. The Role of Electronegative and Electropositive Modifiers in the Adsorption and Decomposition of Acetaldehyde on Rh(111) Surface
  24. Nanoremediation: Tiny Objects Solving Huge Environmental Problems
  25. Copper-Loaded Layered Bismuth Subcarbonate—Efficient Multifunctional Heterogeneous Catalyst for Concerted C–S/C–N Heterocyclization
  26. Chaetomium and Chaetomium-like Species from European Indoor Environments Include Dichotomopilus finlandicus sp. nov.
  27. M(II)Al4 Type Layered Double Hydroxides—Preparation Using Mechanochemical Route, Structural Characterization and Catalytic Application
  28. Polyvinyl-Pyrrolidone-Coated Silver Nanoparticles—The Colloidal, Chemical, and Biological Consequences of Steric Stabilization under Biorelevant Conditions
  29. Removing low levels of Cd(II) and Pb(II) by adsorption on two types of oxidized multiwalled carbon nanotubes
  30. An Updated Risk Assessment as Part of the QbD-Based Liposome Design and Development
  31. Damage-tolerant 3D-printed ceramics via conformal coating
  32. Development of a Hydrophobicity-Controlled Delivery System Containing Levodopa Methyl Ester Hydrochloride Loaded into a Mesoporous Silica
  33. Stability of Boron Nitride Nanosphere Dispersions in the Presence of Polyelectrolytes
  34. Nesting Well-Defined Pt Nanoparticles within a Hierarchically Porous Polymer as a Heterogeneous Suzuki–Miyaura Catalyst
  35. Are Smaller Nanoparticles Always Better? Understanding the Biological Effect of Size-Dependent Silver Nanoparticle Aggregation Under Biorelevant Conditions
  36. Quality-by-Design-Based Development of n-Propyl-Gallate-Loaded Hyaluronic-Acid-Coated Liposomes for Intranasal Administration
  37. Oxidation of Cysteinate Anions Immobilized in the Interlamellar Space of CaAl-Layered Double Hydroxide
  38. Composites of ion-in-conjugation polysquaraine and SWCNTs for the detection of H2S and NH3 at ppb concentrations
  39. Specific Ion Effects on Aggregation and Charging Properties of Boron Nitride Nanospheres
  40. Green Silver and Gold Nanoparticles: Biological Synthesis Approaches and Potentials for Biomedical Applications
  41. Preparation of TiO2/WO3/C/N Composite Nanofibers by Electrospinning Using Precursors Soluble in Water and Their Photocatalytic Activity in Visible Light
  42. Binder-Free Construction of a Methanol Tolerant Pt/TiO2/Carbon Paper Anode by Atomic Layer Deposition
  43. Exploiting a silver–bismuth hybrid material as heterogeneous noble metal catalyst for decarboxylations and decarboxylative deuterations of carboxylic acids under batch and continuous flow conditions
  44. Optimization of the functionalization method of titanate nanotubes in order to use them as drug delivery systems
  45. <p>Presence of Titanium and Toxic Effects Observed in Rat Lungs, Kidneys, and Central Nervous System in vivo and in Cultured Astrocytes in vitro on Exposure by Titanium Dioxide Nanorods</p>
  46. Microcomputed tomography–based characterization of advanced materials: a review
  47. ZnO nanoparticles induce cell wall remodeling and modify ROS/ RNS signalling in roots of Brassica seedlings
  48. Electric and Photocatalytic Properties of Graphene Oxide Depending on the Degree of Its Reduction
  49. Mechanochemical and wet chemical syntheses of CaIn-layered double hydroxide and its performance in a transesterification reaction compared to those of other Ca2M(III) hydrocalumites (M: Al, Sc, V, Cr, Fe, Ga) and Mg(II)-, Ni(II)-, Co(II)- or Zn(II)-bas...
  50. Differential Precipitation of Mg(OH)2 from CaSO4·2H2O Using Citrate as Inhibitor—A Promising Concept for Reagent Recovery from MgSO4 Waste Streams
  51. Dangling-to-Interstitial Oxygen Transition and Its Modifications of the Electronic Structure in Few-Layer Phosphorene
  52. The Structure and Thermal Properties of Solid Ternary Compounds Forming with Ca2+, Al3+ and Heptagluconate Ions
  53. Phosphorus-loaded alumina supported nickel catalysts for CO2 hydrogenation: Ni2P/Ni5P12 drives activity
  54. CuIBiOI is an efficient novel catalyst in Ullmann-type CN couplings with wide scope—A rare non-photocatalyic application
  55. Use of carbon paste electrode and modified by gold nanoparticles for selected macrolide antibiotics determination as standard and in pharmaceutical preparations
  56. Efficient visible-light piezophototronic activity of ZnO-Ag8S hybrid for degradation of organic dye molecule
  57. Quality by Design Based Formulation Study of Meloxicam-Loaded Polymeric Micelles for Intranasal Administration
  58. Nitro-oxidative signalling induced by chemically synthetized zinc oxide nanoparticles (ZnO NPs) in Brassica species
  59. Role of Brønsted and Lewis acidic sites in sulfonated Zr-MCM-41 for the catalytic reaction of cellulose into 5-hydroxymethyl furfural
  60. Size-dependent activity of silver nanoparticles on the morphological switch and biofilm formation of opportunistic pathogenic yeasts
  61. The Potassium-Induced Decomposition Pathway of HCOOH on Rh(111)
  62. Temperature‐Dependent Electrical Transport Properties of Single‐Walled Carbon Nanotube Thin Films Prepared by Electrohydrodynamic Atomization Technique
  63. Adsorption of Azobenzene on Hexagonal Boron Nitride Nanomesh Supported by Rh(111)
  64. Ambient pressure CO2 hydrogenation over a cobalt/manganese-oxide nanostructured interface: A combined in situ and ex situ study
  65. Cost-effective ion-tuning of Birnessite structures for efficient ORR electrocatalysts
  66. Cu–Fe Incorporated Graphene-Oxide Nanocomposite as Highly Efficient Catalyst in the Degradation of Dichlorodiphenyltrichloroethane (DDT) from Aqueous Solution
  67. Chronic responses of aerobic granules to the presence of graphene oxide in sequencing batch reactors
  68. Sulfur nanoparticles transform montmorillonite into an inorganic surfactant applicable in thermoplastics processing
  69. Grid-type transparent conductive thin films of carbon nanotubes as capacitive touch sensors
  70. Luminescence and color properties of Ho3+ co-activated Sr4Al14O25: Eu2+, Dy3+ phosphors
  71. Ultrasound-Assisted Hydrazine Reduction Method for the Preparation of Nickel Nanoparticles, Physicochemical Characterization and Catalytic Application in Suzuki-Miyaura Cross-Coupling Reaction
  72. Comparing the Adsorption Performance of Multiwalled Carbon Nanotubes Oxidized by Varying Degrees for Removal of Low Levels of Copper, Nickel and Chromium(VI) from Aqueous Solutions
  73. On the effects of milling and thermal regeneration on the luminescence properties of Eu2+ and Dy3+ doped strontium aluminate phosphors
  74. Preparation of sulfur hydrophobized plasmonic photocatalyst towards durable superhydrophobic coating material
  75. Rh-induced Support Transformation and Rh Incorporation in Titanate Structures and Their Influence on Catalytic Activity
  76. Selective transformation of ethanol to acetaldehyde catalyzed by Au/h-BN interface prepared on Rh(111) surface
  77. β-Isocupreidinate‒CaAl-layered double hydroxide composites—heterogenized catalysts for asymmetric Michael addition
  78. Core–shell nanoparticles suppress metastasis and modify the tumour-supportive activity of cancer-associated fibroblasts
  79. Synergistic Radiosensitization by Gold Nanoparticles and the Histone Deacetylase Inhibitor SAHA in 2D and 3D Cancer Cell Cultures
  80. Catalytic activity of maghemite supported palladium catalyst in nitrobenzene hydrogenation
  81. Green and selective toluene oxidation–Knoevenagel-condensation domino reaction over Ce- and Bi-based CeBi mixed oxide mixtures
  82. Nature inspired solid–liquid phase amphibious adhesive
  83. Nitrogen doped carbon aerogel composites with TiO2 and ZnO prepared by atomic layer deposition
  84. Porosity determination of nano- and sub-micron particles by single particle inductively coupled plasma mass spectrometry
  85. One-pot mechanochemical ball milling synthesis of the MnOx nanostructures as efficient catalysts for CO2 hydrogenation reactions
  86. The use of functionalized titanate nanotubes as drug delivery systems
  87. Synthesis of iron oxide nanoparticles for DNA purification
  88. Fast optical method for characterizing plasmonic nanoparticle adhesion on functionalized surfaces
  89. Sonochemical Deposition of Palladium Nanoparticles Onto the Surface of N-Doped Carbon Nanotubes: A Simplified One-Step Catalyst Production Method
  90. Ni–Zn–Al-Based Oxide/Spinel Nanostructures for High Performance, Methane-Selective CO2 Hydrogenation Reactions
  91. Layered double alkoxides a novel group of layered double hydroxides without water content
  92. Aging Impairs Cerebrovascular Reactivity at Preserved Resting Cerebral Arteriolar Tone and Vascular Density in the Laboratory Rat
  93. Optimization of the Production Process and Product Quality of Titanate Nanotube–Drug Composites
  94. Influencing the texture and morphological properties of layered double hydroxides with the most diluted solvent mixtures – The effect of 6–8 carbon alcohols and temperature
  95. Rapid, trace-level direct cathodic voltammetric determination of dopamine by oxidized multiwalled carbon nanotube–modified carbon paste electrode in selected samples of pharmaceutical importance
  96. Effects of ultrasonic irradiation on the synthesis, crystallization, thermal and dissolution behaviour of chloride-intercalated, co-precipitated CaFe-layered double hydroxide
  97. Noble-metal-free and Pt nanoparticles-loaded, mesoporous oxides as efficient catalysts for CO2 hydrogenation and dry reforming with methane
  98. Synergetic of Pt Nanoparticles and H-ZSM-5 Zeolites for Efficient CO2 Activation: Role of Interfacial Sites in High Activity
  99. Structural reconstruction of mechanochemically disordered CaFe-layered double hydroxide
  100. Preparation of photocatalytic thin films with composition dependent wetting properties and self-healing ability
  101. Trace level voltammetric determination of Zn(II) in selected nutrition related samples by bismuth-oxychloride-multiwalled carbon nanotube composite based electrode
  102. Placing Ni(II) Ions in Various Positions In/On Layered Double Hydroxides: Synthesis, Characterization and Testing in C–C Coupling Reactions
  103. Ultrasonically-assisted mechanochemical synthesis of zinc aluminate spinel from aluminium-rich layered double hydroxide
  104. Beyond Nanoparticles: The Role of Sub-nanosized Metal Species in Heterogeneous Catalysis
  105. The aggregation behaviour of 2H-imidazole-2-thione derivatives in solution, the solid state and over polycrystalline gold surface
  106. Co(II)-amino acid–CaAl-layered double hydroxide composites – Construction and characterization
  107. Endoplasmic reticulum stress: major player in size-dependent inhibition of P-glycoprotein by silver nanoparticles in multidrug-resistant breast cancer cells
  108. Noble-Metal-Free Iron Nitride/Nitrogen-Doped Graphene Composite for the Oxygen Reduction Reaction
  109. The aggregation behavior of silver nanoparticles in lifelike conditions
  110. Effects of medium and nickel salt source in the synthesis and catalytic performance of nano-sized nickel in the Suzuki-Miyaura cross-coupling reaction
  111. Composition-Dependent Optical and Photoelectrochemical Behavior of Antimony Oxide Iodides
  112. Green synthesis and in situ immobilization of gold nanoparticles and their application for the reduction of p-nitrophenol in continuous-flow mode
  113. Electrical and Photoelectrical Characteristics of с-Si/Porous–Si/CdS Heterojunctions
  114. Novel route to synthesize CaAl- and MgAl-layered double hydroxides with highly regular morphology
  115. Investigation of the Compressibility and Compactibility of Titanate Nanotube-API Composites
  116. Co 4 N/nitrogen-doped graphene: A non-noble metal oxygen reduction electrocatalyst for alkaline fuel cells
  117. Mechanochemically modified hydrazine reduction method for the synthesis of nickel nanoparticles and their catalytic activities in the Suzuki–Miyaura cross-coupling reaction
  118. Pulmonary impact of titanium dioxide nanorods: examination of nanorod-exposed rat lungs and human alveolar cells
  119. Amperometric Determination of Glucose in White Grape and in Tablets as Ingredient by Screen-Printed Electrode Modified with Glucose Oxidase and Composite of Platinum and Multiwalled Carbon Nanotubes
  120. Quantitative Tracking of the Oxidation of Black Phosphorus in the Few-Layer Regime
  121. Development and Application of Carbon-Layer-Stabilized, Nitrogen-Doped, Bamboo-Like Carbon Nanotube Catalysts in CO2 Hydrogenation
  122. Fabrication and characterization of c-Si/porous-Si/CdS/ZnxCd1-xO heterojunctions for applications in nanostructured solar cells
  123. Au–Rh Surface Structures on Rh(111): DFT Insights into the Formation of an Ordered Surface Alloy
  124. Rapid amperometric determination of H2O2 by a Pt nanoparticle/Vulcan XC72 composite-coated carbon paste electrode in disinfection and contact lens solutions
  125. Preface
  126. Chemical characterization of laboratory-generated tar ball particles
  127. One step synthesis of chlorine-free Pt/Nitrogen-doped graphene composite for oxygen reduction reaction
  128. Acetone improves the topographical homogeneity of liquid phase exfoliated few-layer black phosphorus flakes
  129. Diversity of Pd-Cu active sites supported on pristine carbon nanotubes in terms of water denitration structure sensitivity
  130. Reaction and Diffusion Paths of Water and Hydrogen on Rh Covered Black Titania
  131. Effect of Gold on the Adsorption Properties of Acetaldehyde on Clean and h-BN Covered Rh(111) Surface
  132. Ag or Au Nanoparticles Decorated Multiwalled Carbon Nanotubes Coated Carbon Paste Electrodes for Amperometric Determination of H2O2
  133. Morphology Conserving High Efficiency Nitrogen Doping of Titanate Nanotubes by NH3 Plasma
  134. Hydrogen evolution in the photocatalytic reaction between methane and water in the presence of CO2 on titanate and titania supported Rh and Au catalysts
  135. Effect of sonication time on the synthesis of the CdS nanoparticle based multiwall carbon nanotube – maleic anhydride – 1-octene nanocomposites
  136. Thermo-optical properties of residential coals and combustion aerosols
  137. A novel carbon tipped single micro-optrode for combined optogenetics and electrophysiology
  138. Chemical characterization of laboratory-generated tar ball particles
  139. Green synthesis of gold nanoparticles by thermophilic filamentous fungi
  140. Development and characterization of multi-element doped hydroxyapatite bioceramic coatings on metallic implants for orthopedic applications
  141. In Situ DRIFTS and NAP-XPS Exploration of the Complexity of CO2 Hydrogenation over Size-Controlled Pt Nanoparticles Supported on Mesoporous NiO
  142. Biosynthesized silver and gold nanoparticles are potent antimycotics against opportunistic pathogenic yeasts and dermatophytes
  143. Reforming of ethanol on Co/Al 2 O 3 catalysts reduced at different temperatures
  144. Tuning the Activity and Selectivity of Phenylacetylene Hydrosilylation with Triethylsilane in the Liquid Phase over Size Controlled Pt Nanoparticles
  145. Ultrasonically-enhanced preparation, characterization of CaFe-layered double hydroxides with various interlayer halide, azide and oxo anions (CO 3 2− , NO 3 − , ClO 4 − )
  146. A mineralogically-inspired silver–bismuth hybrid material: an efficient heterogeneous catalyst for the direct synthesis of nitriles from terminal alkynes
  147. Tailoring the hexagonal boron nitride nanomesh on Rh(111) with gold
  148. Comment on “Causation or only correlation? Application of causal inference graphs for evaluating causality in nano-QSAR models” by N. Sizochenko, A. Gajewicz, J. Leszczynski and T. Puzyn, Nanoscale, 2016, 8, 7203
  149. Localized growth of carbon nanotubes via lithographic fabrication of metallic deposits
  150. Nitridation of one-dimensional tungsten oxide nanostructures: Changes in structure and photoactivity
  151. On-chip integrated vertically aligned carbon nanotube based super- and pseudocapacitors
  152. Comparative study on the rheological properties and tablettability of various APIs and their composites with titanate nanotubes
  153. Portable cyber-physical system for indoor and outdoor gas sensing
  154. Molybdenum anchoring effect in Fe–Mo/MgO catalyst for multiwalled carbon nanotube synthesis
  155. Pulse electrodeposition and characterization of non-continuous, multi-element-doped hydroxyapatite bioceramic coatings
  156. Mixed Oxides Without Added Noble Metals Derived from Layered Double Hydroxides of the Hydrotalcite Type in the Hydrodechlorination Reaction of Trichloroethylene
  157. Adsorption, polymerization and decomposition of acetaldehyde on clean and carbon-covered Rh(111) surfaces
  158. Facile synthesis route of graphene-like structures from multiwall carbon nanotubes
  159. From nicotinate-containing layered double hydroxides (LDHs) to NAD coenzyme–LDH nanocomposites – Syntheses and structural characterization by various spectroscopic methods
  160. Ni-Amino Acid–CaAl-Layered Double Hydroxide Composites: Construction, Characterization and Catalytic Properties in Oxidative Transformations
  161. Exploring Pd/Al2O3 Catalysed Redox Isomerisation of Allyl Alcohol as a Platform to Create Structural Diversity
  162. Room temperature ethanol sensor with sub-ppm detection limit: Improving the optical response by using mesoporous silica foam
  163. Photoelectrochemistry by Design: Tailoring the Nanoscale Structure of Pt/NiO Composites Leads to Enhanced Photoelectrochemical Hydrogen Evolution Performance
  164. Synthesis, characterization and photocatalytic activity of crystalline Mn(II)Cr(III)-layered double hydroxide
  165. Photoelectrical response of mesoporous nickel oxide decorated with size controlled platinum nanoparticles under argon and oxygen gas
  166. Structure and stability of boron doped titanate nanotubes and nanowires
  167. Screen-printed enzymatic glucose biosensor based on a composite made from multiwalled carbon nanotubes and palladium containing particles
  168. Thin-walled nanoscrolls by multi-step intercalation from tubular halloysite-10Å and its rearrangement upon peroxide treatment
  169. Voltammetric behavior and determination of the macrolide antibiotics azithromycin, clarithromycin and roxithromycin at a renewable silver – amalgam film electrode
  170. The promotion of CO dissociation by molybdenum oxide overlayers on rhodium
  171. Silica-Based Catalyst Supports Are Inert, Are They Not?: Striking Differences in Ethanol Decomposition Reaction Originated from Meso- and Surface-Fine-Structure Evidenced by Small-Angle X-ray Scattering
  172. Physicochemical characterisation and investigation of the bonding mechanisms of API-titanate nanotube composites as new drug carrier systems
  173. Borate-containing layered double hydroxide composites: synthesis, characterization and application as catalysts in the Beckmann rearrangement reaction of cyclohexanone oxime
  174. Kinetic, equilibrium and thermodynamic studies of thiamethoxam adsorption by multi-walled carbon nanotubes
  175. Potential solvents in coupling reactions catalyzed by Cu(II)Fe(III)-layered double hydroxide in a continuous-flow reactor
  176. Mn(II)-containing layered double hydroxide composites: synthesis, characterization and an application in Ullmann diaryl etherification
  177. green synthesised nanoparticle
  178. pH-regulated antimony oxychloride nanoparticle formation on titanium oxide nanostructures: a photocatalytically active heterojunction
  179. Systematic comparison of saturation effects and afterglow properties of Sr4Al14O25:Eu, Dy phosphor excited by alpha and beta ionizing sources and UV light
  180. Titanát nanoszerkezetek és fémek felületi kölcsönhatásai: ioncsere vagy klaszterképződés?
  181. Determination of the platinum concentration of a Pt/silica nanocomposite decorated with ultra small Pt nanoparticles using single particle inductively coupled plasma mass spectrometry
  182. Titania nanotube stabilized BiOCl nanoparticles in visible-light photocatalysis
  183. Photo-induced reactions in the CO 2 -methane system on titanate nanotubes modified with Au and Rh nanoparticles
  184. Syntheses, characterization and catalytic activities of CaAl-layered double hydroxide intercalated Fe(III)-amino acid complexes
  185. Qualitative Discrimination Analysis of Coals Based on Their Laser-Induced Breakdown Spectra
  186. Cu(II)-amino acid–CaAl-layered double hydroxide complexes, recyclable, efficient catalysts in various oxidative transformations
  187. Estimation of the solubility product of hydrocalumite–hydroxide, a layered double hydroxide with the formula of [Ca2Al(OH)6]OH·nH2O
  188. Atomic scale characterization and surface chemistry of metal modified titanate nanotubes and nanowires
  189. Modulating chromatin structure and DNA accessibility by deacetylase inhibition enhances the anti-cancer activity of silver nanoparticles
  190. Hydrodynamic chronoamperometric determination of hydrogen peroxide using carbon paste electrodes coated by multiwalled carbon nanotubes decorated with MnO 2 or Pt particles
  191. Characterization and Catalytic Activity of Different Carbon Supported Pd Nanocomposites
  192. Sorption Behaviour of Trichlorobenzenes and Polycyclic Aromatic Hydrocarbons in the Absence or Presence of Carbon Nanotubes in the Aquatic Environment
  193. Albumin adsorption study onto hydroxyapatite-multiwall carbon nanotube based composites
  194. Synthesis of high-quality, well-characterized CaAlFe-layered triple hydroxide with the combination of dry-milling and ultrasonic irradiation in aqueous solution at elevated temperature
  195. Experimental validation of the Burgio–Rojac model of planetary ball milling by the length control of multiwall carbon nanotubes
  196. Ultrasound-enhanced milling in the synthesis of phase-pure, highly crystalline ZnAl-layered double hydroxide of low Zn(II) content
  197. The Effect of Rh on the Interaction of Co with Al2O3 and CeO2 Supports
  198. Ultrasonically-enhanced mechanochemical synthesis of CaAl-layered double hydroxides intercalated by a variety of inorganic anions
  199. Synthesis and characterization of CdS nanocrystals in Maleic anhydride–Octene-1–Vinylbutyl Ether terpolymer matrix
  200. Silver nanoparticles defeat p53-positive and p53-negative osteosarcoma cells by triggering mitochondrial stress and apoptosis
  201. Catalytic Hydrogenation of d-Xylose Over Ru Decorated Carbon Foam Catalyst in a SpinChem® Rotating Bed Reactor
  202. Characterisation of diesel particulate emission from engines using commercial diesel and biofuels
  203. Mesoporous carbon-supported Pd nanoparticles with high specific surface area for cyclohexene hydrogenation: Outstanding catalytic activity of NaOH-treated catalysts
  204. A novel WS2 nanowire-nanoflake hybrid material synthesized from WO3 nanowires in sulfur vapor
  205. Removal of As(III) and Cr(VI) from aqueous solutions using “green” zero-valent iron nanoparticles produced by oak, mulberry and cherry leaf extracts
  206. Impact of the morphology and reactivity of nanoscale zero-valent iron (NZVI) on dechlorinating bacteria
  207. Silver nanoparticles modulate ABC transporter activity and enhance chemotherapy in multidrug resistant cancer
  208. Ion exchange defines the biological activity of titanate nanotubes
  209. Stability and Temperature-Induced Agglomeration of Rh Nanoparticles Supported by CeO2
  210. Mn(II)–amino acid complexes intercalated in CaAl-layered double hydroxide – Well-characterized, highly efficient, recyclable oxidation catalysts
  211. Voltammetric behavior of erythromycin ethylsuccinate at a renewable silver-amalgam film electrode and its determination in urine and in a pharmaceutical preparation
  212. Environmentally Benign Synthesis Methods of Zero-Valent Iron Nanoparticles
  213. Flow-driven morphology control in the cobalt–oxalate system
  214. The growth and thermal properties of Au deposited on Rh(111): formation of an ordered surface alloy
  215. Mechanochemical synthesis and intercalation of Ca(II)Fe(III)-layered double hydroxides
  216. Propionic Acid Produced by Propionibacterium acnes Strains Contri­butes to Their Pathogenicity
  217. Understanding the role of post-CCVD synthetic impurities, functional groups and functionalization-based oxidation debris on the behaviour of carbon nanotubes as a catalyst support in cyclohexene hydrogenation over Pd nanoparticles
  218. Visible light activation photocatalytic performance of PbSe quantum dot sensitized TiO 2 Nanowires
  219. Optimization of thiamethoxam adsorption parameters using multi-walled carbon nanotubes by means of fractional factorial design
  220. Enhanced dispersion and the reactivity of atomically thin Rh layers supported by molybdenum oxide films
  221. Investigation of the adsorption properties of borazine and characterisation of boron nitride on Rh(111) by electron spectroscopic methods
  222. Rh and Au deposited on ultrathin TiO ~1.2 film formed on Rh(111) facets and the effects of CO exposure
  223. Determination of H2O2 by MnO2 modified screen printed carbon electrode during Fenton and visible light-assisted photo-Fenton based removal of acetamiprid from water
  224. Size-Dependent Toxicity Differences of Intratracheally Instilled Manganese Oxide Nanoparticles: Conclusions of a Subacute Animal Experiment
  225. Optimisation of the synthesis parameters of mechanochemically prepared CaAl-layered double hydroxide
  226. Synthesis and 1-butene hydrogenation activity of platinum decorated bamboo-shaped multiwall carbon nanotubes
  227. Evaluation and comparison of the ammonia adsorption capacity of titanosilicates ETS-4 and ETS-10 and aluminotitanosilicates ETAS-4 and ETAS-10
  228. Facile synthesis of CuS nanoparticles deposited on polymer nanocomposite foam and their effects on microstructural and optical properties
  229. Unveiling the Role of CNTs in the Phase Formation of One-Dimensional Ferroelectrics
  230. Thermal decomposition and reconstruction of CaFe-layered double hydroxide studied by X-ray diffractometry and 57Fe Mössbauer spectroscopy
  231. Synthesis and characterization of CdS nanoparticle based multiwall carbon nanotube–maleic anhydride–1-octene nanocomposites
  232. Structure-Independent Proton Transport in Cerium(III) Phosphate Nanowires
  233. Layered titanate nanostructures: perspectives for industrial exploitation
  234. The Interaction of Cobalt with CeO2(111) Prepared on Cu(111)
  235. Microphysical properties of carbonaceous aerosol particles generated by laser ablation of a graphite target
  236. The catalytic epoxidation of 2-cyclohexen-1-one over uncalcined layered double hydroxides using various solvents
  237. Trace level voltammetric determination of lead and cadmium in sediment pore water by a bismuth-oxychloride particle-multiwalled carbon nanotube composite modified glassy carbon electrode
  238. Facile synthesis of nanostructured carbon materials over RANEY® nickel catalyst films printed on Al2O3 and SiO2 substrates
  239. LEIS and XPS investigation into the growth of cerium and cerium dioxide on Cu(111)
  240. Adsorption of chlorinated phenols on multiwalled carbon nanotubes
  241. Probing the interaction of Rh, Co and bimetallic Rh–Co nanoparticles with the CeO2 support: catalytic materials for alternative energy generation
  242. A simple method to control the formation of cerium phosphate architectures
  243. Functionalized boron nitride porous solids
  244. Visible light induced photocatalytic activity of TiO2 nanowires photosensitized with CdSe quantum dots
  245. Synthesis and characterization of composition-gradient based CdxZn1−xSeyS1−y heterostructured quantum dots
  246. Photocatalytic H2 Evolution Using Different Commercial TiO2 Catalysts Deposited with Finely Size-Tailored Au Nanoparticles: Critical Dependence on Au Particle Size
  247. Growth of Gold on a Pinwheel TiO∼1.2 Encapsulation Film Prepared on Rhodium Nanocrystallites
  248. Bimetallic Fe/Mo–SiO2 aerogel catalysts for catalytic carbon vapour deposition production of carbon nanotubes
  249. Photocatalytic H2 Production Using Pt-TiO2 in the Presence of Oxalic Acid: Influence of the Noble Metal Size and the Carrier Gas Flow Rate
  250. Iron/cobalt-SBA-16 cubic mesoporous composites as catalysts for the production of multi-walled carbon nanotubes
  251. Green synthesis of biomimetic CePO4:Tb nanostructures using the simplest morphology control
  252. Promotion and inhibition effects of TiOx species on Rh inverse model catalysts
  253. Three different clay-supported nanoscale zero-valent iron materials for industrial azo dye degradation: A comparative study
  254. Mechanochemically assisted synthesis of pristine Ca(II)Sn(IV)-layered double hydroxides and their amino acid intercalated nanocomposites
  255. Toxic metal immobilization in contaminated sediment using bentonite- and kaolinite-supported nano zero-valent iron
  256. Synthesis and characterization of polyvinyl alcohol based multiwalled carbon nanotube nanocomposites
  257. Dry reforming of CH4 on Rh doped Co/Al2O3 catalysts
  258. Preparation and Investigation of p-GaAs/n-Cd1-xZnxS1-yTeyHeterojunctions Deposited by Electrochemical Deposition
  259. Effect of a Gold Cover Layer on the Encapsulation of Rhodium by Titanium Oxides on Titanium Dioxide(110)
  260. Investigation of the Cytotoxic Effects of Titanate Nanotubes on Caco-2 Cells
  261. Effects of Support and Rh Additive on Co-Based Catalysts in the Ethanol Steam Reforming Reaction
  262. Titania nanofibers in gypsum composites: an antibacterial and cytotoxicology study
  263. Low-temperature conversion of titanate nanotubes into nitrogen-doped TiO2 nanoparticles
  264. Carbon nanotube-layered double hydroxide nanocomposites
  265. Synthesis and properties of CaAl-layered double hydroxides of hydrocalumite-type
  266. Exploiting the ion-exchange ability of titanate nanotubes in a model water softening process
  267. Influence of gold additives on the stability and phase transformation of titanate nanostructures
  268. Decoration of Titanate Nanowires and Nanotubes by Gold Nanoparticles: XPS, HRTEM and XRD Characterization
  269. Gas Sensing and Thermal Transport Through Carbon-Nanotube-Based Nanodevices
  270. Search for a Raney-Ni type catalyst efficient in the transformation of excess glycerol into more valuable products
  271. Interaction of Rh with Rh Nanoparticles Encapsulated by Ordered Ultrathin TiO1+x Film on TiO2(110) Surface
  272. Photocatalytic activity of nitrogen-doped TiO2-based nanowires: a photo-assisted Kelvin probe force microscopy study
  273. Mössbauer and XRD study of intercalated CaFe-layered double hydroxides
  274. Functionalized Low Defect Graphene Nanoribbons and Polyurethane Composite Film for Improved Gas Barrier and Mechanical Performances
  275. Water Types and Their Relaxation Behavior in Partially Rehydrated CaFe-Mixed Binary Oxide Obtained from CaFe-Layered Double Hydroxide in the 155–298 K Temperature Range
  276. The formation and stability of Rh nanostructures on TiO2(110) surface and TiOx encapsulation layers
  277. Room temperature hydrogen sensors based on metal decorated WO3 nanowires
  278. Reconstruction of calcined MgAl- and NiMgAl-layered double hydroxides during glycerol dehydration and their recycling characteristics
  279. Synthesis and characterization of WO3 nanowires and metal nanoparticle-WO3 nanowire composites
  280. Structure and stability of pristine and Bi and/or Sb decorated titanate nanotubes
  281. Luminescence properties of Ho3+ co-doped SrAl2O4:Eu2+, Dy3+ long-persistent phosphors synthesized with a solid-state method
  282. Radiation induced topotactic [2+2] dimerisation of acrylate derivatives among the layers of a CaFe layered double hydroxide followed by IR spectroscopy
  283. Rehydration of dehydrated CaFe-L(ayered)D(ouble)H(ydroxide) followed by thermogravimetry, X-ray diffractometry and dielectric relaxation spectroscopy
  284. Self-assembling of 2,3-phenyl/thienyl-substituted acrylic acids over polycrystalline gold
  285. Structural stability test of hexagonal CePO4 nanowires synthesized at ambient temperature
  286. Molecular interactions between organic compounds and functionally modified multiwalled carbon nanotubes
  287. Carbon nanotubes synthesis over FeCo-based catalysts supported on SBA-16
  288. Rh-Induced Support Transformation Phenomena in Titanate Nanowire and Nanotube Catalysts
  289. Effect of planetary ball milling process parameters on the nitrogen adsorption properties of multiwall carbon nanotubes
  290. Fine tuning the surface acidity of titanate nanostructures
  291. Effects of carbon nanotube functionalization on the agglomeration and sintering of supported Pd nanoparticles
  292. Metal loading determines the stabilization pathway for Co2+ in titanate nanowires: ion exchange vs. cluster formation
  293. Zeolites
  294. Multi-Walled Carbon Nanotubes
  295. Non-equilibrium transformation of titanate nanowires to nanotubes upon mechanochemical activation
  296. Nanoparticle Dispersions
  297. Studies on the thermal decomposition of multiwall carbon nanotubes under different atmospheres
  298. Repeated simultaneous cortical electrophysiological and behavioral recording in rats exposed to manganese-containing nanoparticles
  299. A Possible Nanoreactor: CaFe-L(ayered)D(ouble)H(ydroxide) with Intercalated Cinnamate Derivatives
  300. Consequences of subacute intratracheal exposure of rats to cadmium oxide nanoparticles
  301. Comparison of Nanoscaled Palladium Catalysts Supported on Various Carbon Allotropes
  302. Preparation, Characterisation and Some Reactions of Organocatalysts Immobilised Between the Layers of a CaFe-Layered Double Hydroxide
  303. Microcystin-LR, a protein phosphatase inhibitor, induces alterations in mitotic chromatin and microtubule organization leading to the formation of micronuclei in Vicia faba
  304. Synthesis and Photocatalytic Performance of Titanium Dioxide Nanofibers and the Fabrication of Flexible Composite Films from Nanofibers
  305. Synthesis and characterisation of coiled carbon nanotubes
  306. Characterization of CNT Enhanced Conductive Adhesives in Terms of Thermal Conductivity
  307. General and Electrophysiological Toxic Effects of Manganese in Rats following Subacute Administration in Dissolved and Nanoparticle Form
  308. Structural characterization of FeCo alloy nanoparticles embedded in SBA-16 and their catalytic application for carbon nanotubes production
  309. Electrical resistivity and thermal properties of compatibilized multi-walled carbon nanotube/polypropylene composites
  310. Thermal diffusivity of aligned multi‐walled carbon nanotubes measured by the flash method
  311. Characterization of carbon thin films prepared by the thermal decomposition of spin coated polyacrylonitrile layers containing metal acetates
  312. Low‐temperature growth of multi‐walled carbon nanotubes by thermal CVD
  313. One-Step Preparation of FeCo Nanoparticles in a SBA-16 Matrix as Catalysts for Carbon Nanotubes Growth
  314. Compact USB measurement and analysis system for real-time fluctuation enhanced sensing
  315. Probing the interaction of Au, Rh and bimetallic Au–Rh clusters with the TiO2 nanowire and nanotube support
  316. Structure of the Au–Rh bimetallic system formed on titanate nanowires and nanotubes
  317. Nitrogen-Doped Anatase Nanofibers Decorated with Noble Metal Nanoparticles for Photocatalytic Production of Hydrogen
  318. A SEM, EDX and XAS characterization of Ba(II)Fe(III) layered double hydroxides
  319. Self-assembling of Z-α-pyridylcinnamic acid molecules over polycrystalline Ag and Au surfaces followed by FT-IR and atomic force microscopies
  320. Formation of CuPd and CuPt Bimetallic Nanotubes by Galvanic Replacement Reaction
  321. Optimization of the Catalytic Chemical Vapor Deposition Synthesis of Multiwall Carbon Nanotubes on FeCo(Ni)/SiO 2 Aerogel Catalysts by Statistical Design of Experiments
  322. Erratum to “Synthesis and characteristic properties of novel Ba(II)Fe(III) layered double hydroxides” [Applied Clay Science 48 (2010) 214–217]
  323. Layer-by-layer assembly of TiO2nanowire/carbon nanotube films and characterization of their photocatalytic activity
  324. Nervous system effects in rats on subacute exposure by lead-containing nanoparticles via the airways
  325. Nervous system effects of dissolved and nanoparticulate cadmium in rats in subacute exposure
  326. Mapping of Functionalized Regions on Carbon Nanotubes by Scanning Tunneling Microscopy
  327. Enhanced photocatalytic activity of TiO2 nanofibers and their flexible composite films: Decomposition of organic dyes and efficient H2 generation from ethanol-water mixtures
  328. Synthesis and characterisation of alkaline earth-iron(III) double hydroxides
  329. In situ synthesis of catalytic metal nanoparticle-PDMS membranes by thermal decomposition process
  330. Functional neurotoxicity of Mn-containing nanoparticles in rats
  331. INCREASING CHEMICAL SELECTIVITY OF CARBON NANOTUBE-BASED SENSORS BY FLUCTUATION-ENHANCED SENSING
  332. Metal deposition and functional neurotoxicity in rats after 3–6 weeks nasal exposure by two physicochemical forms of manganese
  333. Low-Temperature Large-Scale Synthesis and Electrical Testing of Ultralong Copper Nanowires
  334. Moderate anisotropy in the electrical conductivity of bulk MWCNT/epoxy composites
  335. Three-Dimensional Carbon Nanotube Scaffolds as Particulate Filters and Catalyst Support Membranes
  336. Carbon nanotube based sensors and fluctuation enhanced sensing
  337. Synthesis and properties of novel Ba(II)Fe(III) layered double hydroxides
  338. Laser-induced fluorescence measurements on CdSe quantum dots
  339. Beneficial effect of multi-wall carbon nanotubes on the graphitization of polyacrylonitrile (PAN) coating
  340. Numerical differentiation methods for the logarithmic derivative technique used in dielectric spectroscopy
  341. 2-Magnon Raman Behavior of NiO Nanoparticles
  342. Synthesis of Catalytic Porous Metallic Nanorods by Galvanic Exchange Reaction
  343. Adsorption of C6 hydrocarbon rings on mesoporous catalyst supports
  344. Synthesis of Zinc Glycerolate Microstacks from a ZnO Nanorod Sacrificial Template
  345. Ionically Self-Assembled Polyelectrolyte-Based Carbon Nanotube Fibers
  346. Subacute intratracheal exposure of rats to manganese nanoparticles: Behavioral, electrophysiological, and general toxicological effects
  347. A Novel Catalyst Type Containing Noble Metal Nanoparticles Supported on Mesoporous Carbon: Synthesis, Characterization and Catalytic Properties
  348. Synthesis and characterization of nickel catalysts supported on different carbon materials
  349. Multiwall carbon nanotube films surface‐doped with electroceramics for sensor applications
  350. Fluctuation enhanced gas sensing on functionalized carbon nanotube thin films
  351. Drift effect of fluctuation enhanced gas sensing on carbon nanotube sensors
  352. Inkjet printed resistive and chemical‐FET carbon nanotube gas sensors
  353. Improving the performance of functionalized carbon nanotube thin film sensors by fluctuation enhanced sensing
  354. Pyroelectric temperature sensitization of multi-wall carbon nanotube papers
  355. Fine tuning the coverage of a titanate nanowire layer on a glass substrate
  356. Preparation of Si3N4 Composites with Single Wall Carbon Nanotube and Exfoliated Graphite
  357. Degradation of pure and waste polyolefins and PVC in the presence of modified porous catalysts
  358. Silicon Nitride – Carbon Nanotube Composites
  359. Silicon Nitride – Carbon Nanotube Composites
  360. Controlling the pore diameter distribution of multi-wall carbon nanotube buckypapers
  361. Structure and gas permeability of multi-wall carbon nanotube buckypapers
  362. Spectroscopic studies on self-supporting multi-wall carbon nanotube based composite films for sensor applications
  363. Spectroscopic studies on the formation kinetics of SnO2 nanoparticles synthesized in a planetary ball mill
  364. Morphology and N2 Permeability of Multi-Wall Carbon Nanotube—Teflon Membranes
  365. Carbon Nanotubes as Ceramic Matrix Reinforcements
  366. Carbon Nanotubes as Ceramic Matrix Reinforcements
  367. Hydrothermal Conversion of Self-Assembled Titanate Nanotubes into Nanowires in a Revolving Autoclave
  368. Chemical functionalisation of titania nanotubes and their utilisation for the fabrication of reinforced polystyrene composites
  369. Pre-prepared platinum nanoparticles supported on SBA-15 – preparation, pretreatment conditions and catalytic properties
  370. Effect of FeCl3 and acetone on the structure of Na–montmorillonite studied by Mössbauer and XRD measurements
  371. CO hydrogenation over cobalt and iron catalysts supported over multiwall carbon nanotubes: Effect of preparation
  372. Development of CNT-Silicon Nitrides with Improved Mechanical and Electrical Properties
  373. Development of CNT-Silicon Nitrides with Improved Mechanical and Electrical Properties
  374. Functionalization of carbon nanotubes with oligonucleotide in solutions — Production of nanotube chips
  375. Carbon Nanotubes - Towards Artificial Nose Implementation
  376. Multiwall carbon nanotube modified vinylester and vinylester – based hybrid resins
  377. Synthesis of Multiwall Carbon Nanotubes in the Pore System and/or on the Outer Surface of Mesoporous MCM-41 Structures of Various Morphology
  378. Application of carbon nanotubes to silicon nitride matrix reinforcements
  379. Tubular inorganic nanostructures
  380. Development of CNT/Si3N4 composites with improved mechanical and electrical properties
  381. Oriented Crystal Growth Model Explains the Formation of Titania Nanotubes
  382. Highly perfect inner tubes in CVD grown double-wall carbon nanotubes
  383. Complex-assisted one-step synthesis of ion-exchangeable titanate nanotubes decorated with CdS nanoparticles
  384. Development of Preparation Processes for CNT/Si<sub>3</sub>N<sub>4</sub> Composites
  385. Development of Preparation Processes for CNT/Si3N4 Composites
  386. IR and NMR spectroscopic characterization of graphitization process occurring in the pores of mesoporous silicates in formation of carbon nanotubes
  387. Infrared spectroscopy studies of cyclohexene hydrogenation and dehydrogenation catalyzed by platinum nanoparticles supported on mesoporous silicate (SBA-15). Part 1: The role of particle size of Pt nanocrystals supported on SBA-15 silicate
  388. Morphological characterization of mesoporous silicate–carbon nanocomposites
  389. Processing of carbon nanotube reinforced silicon nitride composites by spark plasma sintering
  390. Thermal behavior of multiwall carbon nanotube/zeolite nanocomposites
  391. Thermal stability of platinum particles embedded in mesoporous silicates
  392. Carbon Nanotubes – on the Eve of Success?
  393. Carbon Nanotubes – on the Eve of Success?
  394. Long-time low-impact ball milling of multi-wall carbon nanotubes
  395. Continuous Production of Polycarbonate-Carbon Nanotube Composites
  396. 10.4028/0-87849-371-9.409
  397. Vibrational Spectroscopic Studies on the Formation of Ion-exchangeable Titania Nanotubes
  398. Photosensitization of ion-exchangeable titanate nanotubes by CdS nanoparticles
  399. The dynamics of H2 and N2 sorption in carbon nanotubes
  400. Spherical mesoporous MCM-41 materials containing transition metals: synthesis and characterization
  401. Preface
  402. On the Growth Mechanism of Single-Walled Carbon Nanotubes by Catalytic Carbon Vapor Deposition on Supported Metal Catalysts
  403. Production of multiwall carbon nanotubes in the modified pore system of mesoporous silicates
  404. XPS study of multiwall carbon nanotube synthesis on Ni-, V-, and Ni, V-ZSM-5 catalysts
  405. Comparison of Fe/Al<tex>$_2$</tex>O<tex>$_3$</tex>and Fe, Co/Al<tex>$_2$</tex>O<tex>$_3$</tex>Catalysts Used for Production of Carbon Nanotubes From Acetylene by CCVD
  406. Quantitative Characterization of Hydrophilic−Hydrophobic Properties of MWNTs Surfaces
  407. End morphology of ball milled carbon nanotubes
  408. Determination of traces of elemental impurities in single walled (SWNT) and multi walled (MWNT) pristine and purified carbon nanotubes by instrumental neutron activation analysis
  409. STM investigation of carbon nanotubes connected by functional groups
  410. Preparation and characterization of carbon nanotube reinforced silicon nitride composites
  411. Structural consequences of mild oxidative template removal in the synthesis of modified MCM-41 silicates
  412. IR spectroscopic reinvestigation of the generation of acid sites in Pt-containing faujasite zeolites
  413. Intercalating amino acid guests into montmorillonite host
  414. Synthesis Insertion of Gold Nanoparticles into Mesoporous Silica.
  415. Sonication assisted gold deposition on multiwall carbon nanotubes
  416. Synthesis procedures for production of carbon nanotube junctions
  417. STM investigation of carbon nanotubes completely covered with functional groups
  418. Comparison of Fe/Al 2 O 3 and Fe,Co/Al 2 O 3 catalysts used for production of carbon nanotubes from acetylene by CCVD
  419. Encapsulation of Metal (Au, Ag, Pt) Nanoparticles into the Mesoporous SBA-15 Structure
  420. Synthetic Insertion of Gold Nanoparticles into Mesoporous Silica
  421. Mesoporous Silicates as Nanoreactors for Carbon Nanotube Production in the Absence of Transition Metal Catalysts
  422. Synthesis and characterization of hyperbranched mesoporous silica SBA-15
  423. Binary solvent mixture adsorption as a characterisation tool to determine the hydrophilic/hydrophobic properties of multiwall carbon nanotubes
  424. “Wash and go”: sodium chloride as an easily removable catalyst support for the synthesis of carbon nanotubes
  425. On the role of catalyst, catalyst support and their interaction in synthesis of carbon nanotubes by CCVD
  426. Mechanical and chemical breaking of multiwalled carbon nanotubes
  427. Interconnecting Carbon Nanotubes with an Inorganic Metal Complex
  428. Nanocrystal Templating of Silica Mesopores with Tunable Pore Sizes
  429. Large scale production of short functionalized carbon nanotubes
  430. Production of carbon nanotubes inside the pores of mesoporous silicates
  431. Flexibility of the MCM-41 structure: pore expansion and wall-thickening in MCM-41 derivatives
  432. Heterogeneous catalytic production and mechanical resistance of nanotubes prepared on magnesium oxide supported Co-based catalysts
  433. Alumina and silica supported metal catalysts for the production of carbon nanotubes
  434. Synthesis, characterisation and catalytic applications of sol–gel derived silica–phosphotungstic acid composites
  435. Mesoporous silicates as nanoreactors for synthesis of carbon nanotubes
  436. Mechanisms of Controlled Growth Of Metallic Nanocrystals
  437. Catalyst traces and other impurities in chemically purified carbon nanotubes grown by CVD
  438. The Acidity and Catalytic Activity of Supported Acidic Cesium Dodecatungstophosphates Studied by MAS NMR, FTIR, and Catalytic Test Reactions
  439. An FT-IR and UV–VIS study on the structure and acidity of sol–gel derived silica foams
  440. An FT-IR study on Diels–Alder reactions catalysed by heteropoly acid containing sol–gel silica
  441. IR investigation of the transformation of propyne to propadiene on solid surfaces
  442. IR spectroscopic studies on the surface chemistry of mordenites modified by ceria
  443. Infrared spectroscopic study of benzene and chlorobenzene adsorption on Pt,Cu- and Pt, CoZSM-5 bimetallic zeolite catalysts
  444. Intercalation of various oxide species in-between Laponite layers studied by spectroscopic methods
  445. Spectroscopy in environmental protection, comparative IR and 13C NMR study of chlorofluorocarbons
  446. UV–VIS investigations on Co, Fe and Ni incorporated into sol–gel SiO2–TiO2 matrices
  447. Structure comparison of nanotubes produced by different processes
  448. Production of short carbon nanotubes with open tips by ball milling
  449. Surface Fractal Properties of Morphologically Different Sol−Gel Derived Silicates
  450. XPS characterisation of catalysts during production of multiwalled carbon nanotubes
  451. 29-P-18-Preparation using ozone treatment, characteration and application of isomorphously substituted Ti, V- and Zr-MCM-41 catalysts
  452. Nanostructured carbon generated by chemical vapor deposition from acetylene on surfaces pretreated by a combination of physical and chemical methods
  453. The advantages of ozone treatment in the preparation of tubular silica structures
  454. Preparation, characterization and application of the magadiite based mesoporous composite material of catalytic interest
  455. Selective nucleation and growth of carbon nanotubes at the CoSi2/Si interface
  456. IR spectroscopic investigations of the adsorption of benzoyl chloride in zeolites
  457. Production of differently shaped multi-wall carbon nanotubes using various cobalt supported catalysts
  458. Catalytic synthesis of carbon nanotubes over Co, Fe and Ni containing conventional and sol–gel silica–aluminas
  459. Large-scale synthesis of single-wall carbon nanotubes by catalytic chemical vapor deposition (CCVD) method
  460. In situ MAS 13C-NMR studies of surface intermediates formed upon interaction of CCl2F2 (CFC-12) with NaY-FAU and HZSM-5-MFI zeolites
  461. Acidity of bimetallic silica composites prepared by a complexing agent assisted sol–gel method
  462. Infrared spectroscopic studies on the surface chemistry of bimetallic zeolite systems. Acidity of Pt,Co- and Pt,CuZSM-5 zeolites
  463. Multinuclear MAS NMR investigation of zeolites reacted with chlorofluorocarbons
  464. Bulk production of quasi-aligned carbon nanotube bundles by the catalytic chemical vapour deposition (CCVD) method
  465. Synthesis of single-wall carbon nanotubesby catalytic decomposition of hydrocarbons
  466. Solid state MAS NMR investigation of Y-type zeolites reacted with chlorofluorocarbons
  467. Spectroscopic behavior in the adsorption of COCl2 mixtures on NaY-FAU zeolite
  468. Fermi resonance of C1 chlorine compounds in the adsorbed phase of zeolites. An FTIR and MAS NMR spectroscopic study
  469. FT-IR Spectroscopic Investigation of the Transformation of Allyl Cyanide in the Presence of Butyl-lithium
  470. Indium and gallium containing ZSM-5 zeolites: acidity and catalytic activity in propane transformation
  471. Interconversion of unsaturated C4 nitriles under basic conditions II. Catalytic and FTIR study over basic zeolites
  472. Interconversion of unsaturated C4 nitriles under basic conditions I. An IR-UV—VIS spectroscopic study in the presence of butyllithium
  473. Suggested binding mechanism of the HIV-gp120 to its CD4 receptor
  474. Infrared spectroscopic study of adsorption and reactions of methyl chloride on acidic, neutral and basic zeolites
  475. Conformational Mapping of Amyloid Peptides from the Putative Neurotoxic 25-35 Region
  476. CARBON NANOTUBES AS CERAMIC MATRIX REINFORCEMENTS
  477. Isomorphous Substitution in Zeolites
  478. Functionalization of Multi-Walled Carbon Nanotubes (MWCNTS)
  479. Sonochemical Synthesis of Inorganic Nanoparticles