All Stories

  1. Eco-Efficient Concrete for Sustainable Construction
  2. Incorporação de lamas provenientes do corte de rochas ornamentais em materiais cimentícios
  3. Sustainable Mining: Reuse of Clay from Abandoned Areas in the South of Brazil for Ceramic Production Based on a Simplex Design
  4. Valorization of Brazilian waste foundry sand from circular economy perspective
  5. Life cycle assessment in the ceramic tile industry: a review
  6. Cross-Cultural Ventures to Design Stone Products
  7. Metal Marking Behavior and Testing of Porcelain Tableware
  8. Role of chemical admixtures on 3D printed Portland cement: Assessing rheology and buildability
  9. Controlling efflorescence in geopolymers: A new approach
  10. Embodied energy and carbon footprint comparison in wind and photovoltaic power plants
  11. Assessment of the recycling potential of stone processing plant wastes based on physicochemical features and market opportunities
  12. Effect of Feldspar Substitution by Basalt on Pyroplastic Behaviour of Porcelain Tile Composition
  13. Role of temperature in 3D printed geopolymers: Evaluating rheology and buildability
  14. Carbon footprint and embodied energy of a wind turbine blade—a case study
  15. Traditional Ceramics Manufacturing
  16. Zeolites‐containing geopolymers obtained from biomass fly ash: Influence of temperature, composition, and porosity
  17. Development of new geopolymers based on stone cutting waste
  18. Study of cure conditions effect on the properties of wood biomass fly ash geopolymers
  19. Additive manufacturing effect on the mechanical behaviour of architectural stoneware bricks
  20. Avaliação da energia incorporada e da emissão de CO2 em recipientes para refrigerantes: PET versus vidro
  21. Early-stage materials selection based on embodied energy and carbon footprint
  22. Effect of the particle size range of construction and demolition waste on the fresh and hardened-state properties of fly ash-based geopolymer mortars with total replacement of sand
  23. Spatial and seasonal dynamics of elemental composition and mineralogy of intertidal and subtidal sediments in the Lima estuary (NW Portugal)
  24. In-situ synthesis of zeolites by geopolymerization of biomass fly ash and metakaolin
  25. Waste-based geopolymeric mortars with very high moisture buffering capacity
  26. Using Thymolphthalein for Accelerated Carbonation Testing of High Volume Fly Ash Cementitious Blends
  27. The roles of P 2 O 5 and SiO 2 /Li 2 O ratio on the network structure and crystallization kinetics of non-stoichiometric lithium disilicate based glasses
  28. High-volume fly ash paste for developing ultra-high performance concrete (UHPC)
  29. Methodology for Analysis of the Reactivity of Coal Fly Ash Using Selective Dissolution by Hydrofluoric Acid
  30. Biomass fly ash effect on fresh and hardened state properties of cement based materials
  31. Extrusion of ceramic emulsions: Preparation and characterization of cellular ceramics
  32. Porous hollow tubes processed by extrusion of ceramic emulsions
  33. Carbonation Resistance of High Volume Fly Ash Concrete
  34. Extrusion of ceramic emulsions: Plastic behavior
  35. Extrusion of ceramic pastes: An alternative approach to obtain the Benbow׳s model parameters
  36. Apatite crystallization from glasses in the Ca5(PO4)3F–CaAl2Si2O8–CaMgSi2O6–NaAlSi3O8 system
  37. An overview of using solid wastes for pigment industry
  38. Novel Ceramic Pigments Based on Industrial Wastes
  39. Effect of Al2O3 and K2O content on structure, properties and devitrification of glasses in the Li2O–SiO2 system
  40. Impedance Spectroscopy Evolution upon Sintering of Alumina Bodies Containing Al-Rich Anodizing Sludge
  41. The effect of fluoride ions on the structure and crystallization kinetics of La2O3-containing diopside based oxyfluoride glasses
  42. Synthesis and properties of lithium disilicate glass-ceramics in the system SiO2–Al2O3–K2O–Li2O
  43. Sintering and crystallization behavior of CaMgSi2O6–NaFeSi2O6 based glass-ceramics
  44. Ni-doped hibonite (CaAl12O19): A new turquoise blue ceramic pigment
  45. Behaviour of different industrial ceramic pastes in extrusion process
  46. Blue cobalt doped-hibonite pigments prepared from industrial sludges: Formulation and characterization
  47. Surface properties of doped and undoped TiO2 thin films deposited by magnetron sputtering
  48. Single screw extrusion of mullite-based tubes containing Al-rich anodising sludge
  49. Vitrification of low silica fly ash: suitability of resulting glass ceramics for architectural or electrical insulator applications
  50. Removal of Pb2+ and Ni2 ions from aqueous media by filtration through clay-based beds
  51. Malayaite ceramic pigments prepared with galvanic sludge
  52. Ceramic Properties of Alumina and Alumina-Mullite Pressed Bodies Based on Al-Rich Anodising Sludge
  53. Properties of sintered mullite and cordierite pressed bodies manufactured using Al-rich anodising sludge
  54. Synthesis of black ceramic pigments from secondary raw materials
  55. Synthesis and characterization of MgSiO3-containing glass-ceramics
  56. Influence of NiO on the crystallization kinetics of near stoichiometric cordierite glasses nucleated with TiO2
  57. Non-isothermal crystallization kinetic studies on MgO–Al2O3–SiO2–TiO2 glass
  58. Fraguado de cementos basados en residuos estimado por espectroscopia de impedancia y medidas en temperatura
  59. Desarrollo de pigmentos cerámicos basados en residuos
  60. Extrusion and property characterisation of waste-based ceramic formulations
  61. Crystallization behaviour, structure and properties of sintered glasses in the diopside–Ca-Tschermak system
  62. Diopside–Ca-Tschermak clinopyroxene based glass–ceramics processed via sintering and crystallization of glass powder compacts
  63. Development of Waste-Containing Malayaite Ceramic Pigments
  64. Properties of Wastes-Based Extruded Ceramics Formulations
  65. Properties of Wastes-Based Extruded Ceramics Formulations
  66. Evolución de la espectroscopia de impedancia sobre cuerpos extruidos basados en barros de anodizado ricos en Al
  67. Electrical Characterization of Mullite Bodies Containing Al-Rich Anodizing Sludge
  68. Electrical characterisation of cordierite bodies containing Al-rich anodising sludge
  69. Extrusion of alumina and cordierite-based tubes containing Al-rich anodising sludge
  70. High temperature mullite dissolution in ceramic bodies derived from Al-rich sludge
  71. Plastic behaviour of different ceramic pastes processed by extrusion
  72. Predicting processing-sintering-related properties of mullite–alumina ceramic bodies based on Al-rich anodising sludge by impedance spectroscopy
  73. Production of Al-rich sludge-containing ceramic bodies by different shaping techniques
  74. Extrusion of Recycled Pastes Based on Al-Rich Anodising Sludge
  75. Removal of nickel from aqueous solutions by clay-based beds
  76. Electrical characterization of mullite/alumina bodies based on Al-rich anodizing sludge by impedance spectroscopy
  77. Processing of cordierite based ceramics from alkaline-earth-aluminosilicate glass, kaolin, alumina and magnesite
  78. Development of glass-ceramics by sintering and crystallization of fine powders of calcium-magnesium-aluminosilicate glass
  79. Recycling of Al-rich industrial sludge in refractory ceramic pressed bodies
  80. Spray-dried calcined clays in water filtration columns used for chromium removal
  81. The design activity and innovation capability