All Stories

  1. Simulated fireside corrosion of T91 in oxy-combustion systems with an emphasis on coal/biomass environments

    Article • Materials at High Temperatures, June 2019, Taylor & Francis

    Joseph Tylczak, Dr Tomasz Paweł Dudziak, Dr Nigel J SIMMS

  2. Hydrogen transport during steam oxidation of iron and nickel alloys

    Article • Materials at High Temperatures, March 2019, Taylor & Francis

    Dr Nigel J SIMMS

  3. Comparison between oxidation of Fe–Cr–Al sputter coatings in air and air–HCl environments at 550°C

    Article • Materials at High Temperatures, January 2015, Taylor & Francis

    Dr Nigel J SIMMS

  4. Metal Loss of Steam-Oxidized Alloys after Exposures at 675°C and 725°C for 500 Hours

    Article • High Temperature Materials and Processes, January 2015, De Gruyter

    Dr Tomasz Paweł Dudziak, Dr Nigel J SIMMS

  5. Steam oxidation of TP347HFG, super 304H and HR3C – analysis of significance of steam flowrate and specimen surface finish

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, July 2014, Taylor & Francis

    Dr Nigel J SIMMS, Dr Tomasz Paweł Dudziak

  6. Fireside corrosion degradation of ferritic alloys at 600°C in oxy-fired conditions

    Article • Corrosion Science, February 2014, Elsevier

    Dr Tomasz Paweł Dudziak, Dr Nigel J SIMMS

  7. Type II hot corrosion: Behavior of CMSX‐4 and IN738LC as a function of corrosion environment

    Article • Werkstoffe und Korrosion, December 2013, Wiley

    Dr Nigel J SIMMS

  8. Prediction of the Remaining Service Life of Superheater and Reheater Tubes in Coal-Biomass Fired Power Plants

    Article • Advanced Materials Research, December 2013, Trans Tech Publications

    Dr Nigel J SIMMS

  9. Boiler corrosion and monitoring

    Article • Materials at High Temperatures, December 2013, Taylor & Francis

    Dr Nigel J SIMMS, Mr Antony T Fry

  10. Steam oxidation behaviour of plasma nitrided Fe-based alloys

    Article • Anti-Corrosion Methods and Materials, November 2013, Emerald

    Dr Tomasz Paweł Dudziak, Dr Nigel J SIMMS

  11. Trends in fireside corrosion damage to superheaters in air and oxy-firing of coal/biomass

    Article • Fuel, November 2013, Elsevier

    Dr Nigel J SIMMS

  12. Hot corrosion tests on corrosion resistant coatings developed for gas turbines burning biomass and waste derived fuel gases

    Article • Surface and Coatings Technology, August 2013, Elsevier

    Dr Nigel J SIMMS

  13. Fireside issues in advanced power generation systems

    Article • Materials Science and Technology, July 2013, Taylor & Francis

    Dr Nigel J SIMMS

  14. High temperature oxidation and corrosion of gas turbine materials in burner rig exposures

    Article • Materials Science and Technology, July 2013, Taylor & Francis

    Dr Nigel J SIMMS

  15. Modelling fireside corrosion of thermal sprayed coatings in co‐firing of coal/biomass

    Article • Werkstoffe und Korrosion, May 2013, Wiley

    Dr Nigel J SIMMS

  16. Effect of biofuel‐derived contaminants on coated industrial gas turbines blade materials

    Article • Werkstoffe und Korrosion, May 2013, Wiley

    Dr Nigel J SIMMS

  17. Fireside Corrosion of Superheater Materials in Coal/Biomass Co-fired Advanced Power Plants

    Article • Oxidation of Metals, March 2013, Springer Science + Business Media

    Dr Nigel J SIMMS

  18. Type II Hot Corrosion: Kinetics Studies of CMSX-4

    Article • Oxidation of Metals, March 2013, Springer Science + Business Media

    Dr Nigel J SIMMS

  19. Development of hot corrosion resistant coatings for gas turbines burning biomass and waste derived fuel gases

    Article • Surface and Coatings Technology, February 2013, Elsevier

    Dr Nigel J SIMMS

  20. Boiler corrosion and monitoring

    Article • Materials at High Temperatures, January 2013, Maney Publishing

    Dr Nigel J SIMMS, Mr Antony T Fry

  21. Fireside corrosion of superheaters: Effects of air and oxy-firing of coal and biomass

    Article • Fuel, November 2012, Elsevier

    Dr Nigel J SIMMS

  22. Characterisation of oxide scales developed on high temperature resistant alloys in pure steam environments

    Article • Materials at High Temperatures, September 2012, Taylor & Francis

    Dr Tomasz Paweł Dudziak, Dr Nigel J SIMMS

  23. Microscopy of fireside corrosion on superheater materials for oxy-fired pulverised fuel power plants

    Article • Materials at High Temperatures, September 2012, Taylor & Francis

    Dr Nigel J SIMMS

  24. Characterisation of oxide scales developed on high temperature resistant alloys in pure steam environments

    Article • Materials at High Temperatures, January 2012, Maney Publishing

    Dr Tomasz Paweł Dudziak, Dr Nigel J SIMMS

  25. Subsea Processing in Remote Marginal Fields

    Article • January 2012, Society of Petroleum Engineers (SPE)

    Dr Nigel J SIMMS

  26. Microscopy of fireside corrosion on superheater materials for oxy-fired pulverised fuel power plants

    Article • Materials at High Temperatures, January 2012, Maney Publishing

    Dr Nigel J SIMMS

  27. Performance of thermal barrier coatings in industrial gas turbine conditions

    Article • Materials at High Temperatures, December 2011, Taylor & Francis

    Dr Nigel J SIMMS

  28. High temperature oxidation and corrosion of gas turbine component materials in burner rig exposures

    Article • Materials at High Temperatures, December 2011, Taylor & Francis

    Dr Nigel J SIMMS

  29. Gaseous emissions during concurrent combustion of biomass and non-recyclable municipal solid waste

    Article • Chemistry Central Journal, February 2011, Springer Science + Business Media

    Dr Nigel J SIMMS

  30. Performance of thermal barrier coatings in industrial gas turbine conditions

    Article • Materials at High Temperatures, January 2011, Maney Publishing

    Dr Nigel J SIMMS

  31. High temperature oxidation and corrosion of gas turbine component materials in burner rig exposures

    Article • Materials at High Temperatures, January 2011, Maney Publishing

    Dr Nigel J SIMMS

  32. Investigation of gas turbine material performance in high CO2and steam atmospheres

    Article • Anti-Corrosion Methods and Materials, June 2010, Emerald

    Dr Nigel J SIMMS

  33. Gas Turbine Oxidation and Corrosion

    Article • January 2010, Elsevier

    Dr Nigel J SIMMS

  34. Diffusion Coatings

    Article • January 2010, Elsevier

    Dr Nigel J SIMMS

  35. Pilot‐scale combustion of fast‐pyrolysis bio‐oil: Ash deposition and gaseous emissions

    Article • Environmental Progress & Sustainable Energy, August 2009, Wiley

    Dr Nigel J SIMMS

  36. High temperature corrosion monitoring by electrochemical noise techniques

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, June 2009, Taylor & Francis

    Dr Nigel J SIMMS

  37. Corrosion in Biomass Combustion Systems

    Article • Materials Science Forum, September 2008, Trans Tech Publications

    Dr Nigel J SIMMS

  38. Modelling the Development of Type I Hot Corrosion on Coated and Uncoated Single Crystal Superalloys

    Article • Materials Science Forum, September 2008, Trans Tech Publications

    Dr Nigel J SIMMS

  39. Performance of candidate gas turbine abradeable seal materials in high temperature combustion atmospheres

    Article • June 2008, Taylor & Francis

    Dr Nigel J SIMMS

  40. Lifetime extension of FeCrAIRE alloys in air. Potential role of enhanced Al reservoir and surface pre-treatment (SMILER)

    Article • June 2008, Taylor & Francis

    Dr Nigel J SIMMS

  41. Hot corrosion of coated and uncoated single crystal gas turbine materials

    Article • Werkstoffe und Korrosion, June 2008, Wiley

    Dr Nigel J SIMMS

  42. Effects of Oxidation and Hot Corrosion in a Nickel Disc Alloy

    Article • January 2008, The Minerals, Metals and Materials Society

    Dr Nigel J SIMMS

  43. Performance of candidate gas turbine abradeable seal materials in high temperature combustion atmospheres

    Article • January 2008, Elsevier

    Dr Nigel J SIMMS

  44. Lifetime extension of FeCrAIRE alloys in air. Potential role of enhanced Al reservoir and surface pre-treatment (SMILER)

    Article • January 2008, Elsevier

    Dr Nigel J SIMMS

  45. Modelling hot corrosion in industrial gas turbines

    Article • Materials at High Temperatures, September 2007, Taylor & Francis

    Dr Nigel J SIMMS

  46. Wastes as Co-Fuels:  The Policy Framework for Solid Recovered Fuel (SRF) in Europe, with UK Implications

    Article • Environmental Science & Technology, June 2007, American Chemical Society (ACS)

    Dr Nigel J SIMMS

  47. Continuous analysis of elemental emissions from a biofuel gasifier

    Article • Journal of Analytical Atomic Spectrometry, January 2007, Royal Society of Chemistry

    Dr Nigel J SIMMS

  48. Modelling hot corrosion in industrial gas turbines

    Article • Materials at High Temperatures, January 2007, Maney Publishing

    Dr Nigel J SIMMS

  49. BiosolidsA Fuel or a Waste? An Integrated Appraisal of Five Co-combustion Scenarios with Policy Analysis

    Article • Environmental Science & Technology, December 2005, American Chemical Society (ACS)

    Dr Nigel J SIMMS

  50. Lifetime extension of FeCrAlRE alloys in air: Potential roles of an enhanced Al-reservoir and surface pre-treatment

    Article • Werkstoffe und Korrosion, December 2005, Wiley

    Dr Nigel J SIMMS

  51. Performance of candidate gas turbine abradeable seal materials in high temperature combustion atmospheres

    Article • Werkstoffe und Korrosion, November 2005, Wiley

    Dr Nigel J SIMMS

  52. Development of Hot Corrosion on Coated Single Crystal Superalloys

    Article • Materials Science Forum, August 2004, Trans Tech Publications

    Dr Nigel J SIMMS

  53. Gas turbines: gas cleaning requirements for biomass-fired systems

    Article • Materials Research, March 2004, FapUNIFESP (SciELO)

    Dr Nigel J SIMMS

  54. Development and application of a methodology for the measurement of corrosion and erosion damage in laboratory, burner rig and plant environments

    Article • Materials at High Temperatures, May 2000, Maney Publishing

    Dr Nigel J SIMMS

  55. Development and application of a methodology for the measurement of corrosion and erosion damage in laboratory, burner rig and plant environments

    Article • Materials at High Temperatures, May 2000, Taylor & Francis

    Dr Nigel J SIMMS

  56. Eroslon-corrosion modeling of gas turbine materials for coal-fired combined cycle power generation

    Article • Fuel and Energy Abstracts, May 1996, Elsevier

    Dr Nigel J SIMMS

  57. Erosion-corrosion modelling of gas turbine materials for coal-fired combined cycle power generation

    Article • Wear, July 1995, Elsevier

    Dr Nigel J SIMMS

  58. Alloy corrosion in a coal gasification system

    Article • Journal de Physique IV (Proceedings), December 1993, EDP Sciences

    Dr Nigel J SIMMS

  59. Influence of Boric Acid Coatings on the Oxidation of 2.25Cr-1 Mo Steel in Oxygen

    Article • CORROSION, May 1989, NACE International

    Dr Nigel J SIMMS