All Stories

  1. A photo-sensitive piezoelectric composite material of poly(vinylidene fluoride-trifluoroethylene) and titanium oxide phthalocyanine
  2. Sensitivity improvement of a miniaturized label-free electrochemical impedance biosensor by electrode edge effect
  3. Measurement of LED chips using a large-area silicon photodiode
  4. A light sensitive actuator-based smart polymer loudspeaker array
  5. A novel acoustofluidic device for antigen antibody interaction detection using electrochemical impedance measurement
  6. New light field camera based on physical based rendering tracing
  7. Developing dual-beam laser Doppler interferometry system for opto-piezoelectric materials based ultrasonic parking sensors and optofluidics sensors
  8. Improving Shack-Hartmann wavefront sensor by using sub-wavelength annular apertures
  9. Design and fabrication of sub-wavelength annular apertures on fiber tip for femtosecond laser machining
  10. Research and development on the construction of 2D light-driven droplet manipulation platform based on light modulation of TiOPc impedance
  11. On the sensitivity improvement of a miniaturized label-free electrochemical impedance biosensor
  12. Electrochemical impedance spectroscopy based-on interferon-gamma detection
  13. On the performance improvement of transmitted Bessel beams emitted from sub-wavelength annular aperture coupled with periodic grating
  14. High-performance organic nano-floating-gate memory devices based on graphite nanocrystals as charge-trapping elements and high-k Ta2O5 as a controlled gate dielectric
  15. Development of a Photoresponsive and Electrostrictive Material from P(VDF-TrFE-CFE) and TiOPc Composite
  16. On the Dynamics of a Micro-Beam Driven by a Traveling Harmonic Force
  17. Characteristics of a tapered hollow micro-tube emitting a Bessel light beam
  18. An integrated platform for biomolecule interaction analysis
  19. Self-powered semi-passive piezoelectric structural damping based on zero-velocity crossing detection
  20. Photoconductive Piezoelectric Polymer Made From a Composite of P(VDF-TrFE) and TiOPc
  21. A Thin Light Flexible Electromechanically Actuated Electret-Based Loudspeaker for Automotive Applications
  22. Generating a sub-wavelength Bessel-like light beam using a tapered hollow tube
  23. Development of an optically modulated piezoelectric sensor/actuator based on titanium oxide phthalocyanine thin film
  24. Power enhancement of piezoelectric transformers by adding heat transfer equipment
  25. Study and application of free-form electret actuators
  26. Tailoring the performance of flexible electret loudspeakers by varying cell actuator formation
  27. Comparison of three different topologies of driving LEDs with a piezoelectric transformer
  28. Development of a photoconductive piezoelectronic material from composite of P(VDF-TrFE) and TiOPc
  29. Generating high DOF light by using tapered hollow tube in a lithography system
  30. High-Precision Ultrasonic Ranging System Platform Based on Peak-Detected Self-Interference Technique
  31. Laser ablation of silicon using a Bessel-like beam generated by a subwavelength annular aperture structure
  32. Plenary speaker
  33. EDITORIAL: First HOOT from International Journal of Automation and Smart Technology
  34. Taiwan Perspective: Developing Smart Living Technology
  35. Integrating single-point vibrometer and full-field electronic speckle pattern interferometer to evaluate a micro-speaker
  36. Dependency of working temperature and equivalent constant of concentric disk-type piezoelectric transformer
  37. On the improvement for charging large-scale flexible electrostatic actuators
  38. Integrating fault tolerance algorithm and circularly polarized ellipsometer for point-of-care applications
  39. Development of a label-free impedance biosensor for detection of antibody–antigen interactions based on a novel conductive linker
  40. Optically Defined Modal Sensors Incorporating Spiropyran-Doped Liquid Crystals with Piezoelectric Sensors
  41. Design and fabrication of a piezoelectric mode 2 sensor based on optical modulated liquid crystal and spiropyran
  42. Charge storage and mechanical properties of porous PTFE and composite PTFE/COC electrets
  43. Injecting charges on large-area electret thin film by corona multi-pin discharge method
  44. Enhanced detection of fluorescent nanospheres using two-channel radially polarized surface plasmon microscopy
  45. Simulation and experimental study of flexible electret-based loudspeaker vibration modes by electronic speckle pattern interferometry
  46. Electromagnetic Interference Analysis of DC–DC Converters Based on Piezoelectric Transformers
  47. Enhanced Fluorescence from Gratings
  48. Modified Frequency-Partitioned Spectrum Estimation for a Wireless Health Advanced Monitoring Bio-Diagnosis System
  49. Dual-channel radially-polarized surface plasmon microscopy for simultaneous detection of fluorescence and linear scattering of nanospheres
  50. Use of 2-(6-mercaptohexyl) malonic acid to adjust the morphology and electret properties of cyclic olefin copolymer and its application to flexible loudspeakers
  51. Smart windows with functions of reflective display and indoor temperature-control
  52. Research and development of an integrated multi-parameter quartz crystal microbalance and surface plasmon resonance system
  53. Design of Switching Damping Control for Smart Structure Self-Powered Adaptive Damping Control
  54. Highly anisotropic beam patterns for a pot-like ultrasonic sensor with penetrating slots configuration
  55. A novel, electrically protein-manipulated microcantilever biosensor for enhancement of capture antibody immobilization
  56. Focusing properties of microspheres containing multiconcentric metallic rings
  57. Radially polarized surface plasmon microscopy for sensitive detection of fluorescent nanospheres
  58. Continuous numerical aperture properties of a cylindrically polarized light illuminated sub-wavelength annular aperture
  59. Design of fixed frequency controlled radial-mode stacked disk-type piezoelectric transformers for DC/DC converter applications
  60. Research on three dimensional machining effects using atomic force microscope
  61. Radially-polarized surface plasmon microscopy for sensitive detection of nanometric-sized fluorescent spheres and nonlinearly active nanocrystals
  62. Electrical properties of single and multiple poly(3,4-ethylenedioxythiophene) nanowires for sensing nitric oxide gas
  63. Propagation characteristics of silver and tungsten subwavelength annular aperture generated sub-micron non-diffraction beams
  64. Directional photoluminescence enhancement of organic emitters via surface plasmon coupling
  65. Nanopatterning on Silicon Wafers Using AFM-Based Lithography—for Solar Cells
  66. Opto-mechatronic configurations to maximize dynamic range and optimize resolution of optical instruments
  67. Light control in organic electroluminescence devices by plasmonic grating coupled emission for biochemical applications
  68. Effect of subwavelength annular aperture diameter on the nondiffracting region of generated Bessel beams
  69. Ellipsometric surface plasmon resonance
  70. Novel Approach to Fuzzy-Wavelet ECG Signal Analysis for a Mobile Device
  71. AN AFM PROBE CONTROLLER DESIGN BASED ON μ-SYNTHESIS
  72. Modeling of piezoelectric transformers using finite‐element technique
  73. Subwavelength nondiffraction beam generated by a plasmonic lens
  74. EDUCATION SYSTEM INTEGRATION IN CROSS-DISCIPLINARY WITH COLLEGES — VIRTUAL BIOMEDICAL INSTRUMENT (VBI) FOR EXAMPLE
  75. Design of a phase array ultrasonic sensor using vibration decoupled concept
  76. Thermo-Piezoelectric Finite Element Modeling for Piezoelectric Transformers
  77. A double-sided electret polymer film-based electrostatic actuator
  78. A blended polymer electret-based micro-electronic power generator
  79. Fabrication of silicon dioxide nano array for bio-mimicking of molecular interactions
  80. Role of Cylindrical Surface Plasmons in Generating Non-Diffraction Beams by Plasmonic Lens
  81. Experiment and Simulation on the Continuous Numerical Aperture Proposition of Sub-Wavelength Annular Aperture
  82. A Study of the Long Propagation Range Bessel Beam Generated by a Subwavelength Annular Aperture Structure
  83. A surface-plasmon resonance phase modulation bio-reaction detection system with (5,1) phase-shifting algorithm
  84. A modal actuator-based single-layer piezoelectric transformer for coilless soft switching inverters
  85. Enhanced luminescence of organic/metal nanostructure for grating coupler active long-range surface plasmonic device
  86. Nano Fabrication of Conducting Polymers for NO Gas by Dip Pen Nanolithography
  87. Atomic force microscopy: Determination of unbinding force, off rate and energy barrier for protein–ligand interaction
  88. Electrochemical Detection of High-Sensitivity C-Reactive Protein Based on Biomimic Design of Electroactive Nanoassembly Multilayers
  89. OPTIMAL HEPATITIS B VIRUS PRIMER SEQUENCE DESIGN FOR ISOTHERMAL AMPLIFICATION
  90. Laser linear encoder with both high fabrication and head-to-scale tolerances
  91. Correction to "Establishing a K - 12 nanotechnology program for teacher professional development"
  92. Study of the transverse shear mode resonator with coupled viscoelastic layer by scanning tunneling microscopy
  93. Directional light beaming control by a subwavelength asymmetric surface structure
  94. Experimental analysis of surface plasmon behavior in metallic circular slits
  95. Multilayer modal actuator-based piezoelectric transformers
  96. Toward Integrated Plasmonics for Biosensing
  97. Dynamic response of glucagon/anti-glucagon pairs to pulling velocity and pH studied by atomic force microscopy
  98. Enhancement and tunability of active plasmonic by multilayer grating coupled emission
  99. Photorefractive crystal-based holographic interferometry system for full-field wave propagation metrology
  100. Determination of Binding Constant and Stoichiometry for Antibody-Antigen Interaction with Surface Plasmon Resonance
  101. Homopolyvalent antibody–antigen interaction kinetic studies with use of a dual-polarization interferometric biosensor
  102. A miniaturized germanium-doped silicon dioxide-based surface plasmon resonance waveguide sensor for immunoassay detection
  103. Admittance loci design method for multilayer surface plasmon resonance devices
  104. Measurement of dimensions of pentagonal doughnut-shaped C-reactive protein using an atomic force microscope and a dual polarisation interferometric biosensor
  105. Design and Performance Evaluation of a Multi-Functional Microscopy
  106. Developing a Nanowriter System: Simulation and Experimental Set-Up of a Plasmonic-Based Lens Design
  107. Design and fabrication of an alternating dielectric multi-layer device for surface plasmon resonance sensor
  108. Developing a Nanowriter System: Simulation and Experimental Set-Up of a Plasmonic-Based Lens Design
  109. Surface ultrastructure of SARS coronavirus revealed by atomic force microscopy
  110. Bio-Plasmonics: Nano/micro Structure of Surface Plasmon Resonance Devices for Biomedicine
  111. Electrical and mechanical fully coupled theory and experimental verification of Rosen-type piezoelectric transformers
  112. Compact genetic algorithm for active interval scheduling in hierarchical sensor networks
  113. Effect of force control algorithms on the scanning probe microscope lithography system
  114. Physical origin of directional beaming emitted from a subwavelength slit
  115. Etching submicrometer trenches by using the Bosch process and its application to the fabrication of antireflection structures
  116. Design and construction of linear laser encoders that possess high tolerance of mechanical runout
  117. Hierarchical sensor network architecture for stationary smart node supervision
  118. Design and implementation of smart sensor nodes for wireless disaster monitoring systems
  119. In vivo wireless biodiagnosis system for long-term bioactivity monitoring network
  120. Surface plasmon resonance device with dielectric mirror for biochemical sensing
  121. On the Autonomous Gain and Phase Tailoring Transfer Functions of Symmetrically Distributed Piezoelectric Sensors
  122. From an Integrated Biochip Detection System to a Defensive Weapon Against the SARS-CoV Virus: OBMorph
  123. Electrical and mechanical field interactions of piezoelectric systems: foundation of smart-structure-based piezoelectric sensors and actuators, piezotransformers, and free-fall sensors
  124. Optimizing piezoelectric transformer for maximum power transfer
  125. Autonomous Gain-Phase Tailoring of Rotational Acceleration Rate Sensors
  126. Expanding the bandwidth of rotational accelerometers by autonomous gain phase tailoring
  127. Micro-System Displacement and Profile Measurement By an Integrated Photon Tunneling and Confocal Microscope
  128. Targeted origin placement for the autonomous gain-phase tailoring of piezoelectric sensors
  129. Phase-shifting algorithms for electronic speckle pattern interferometry
  130. Analyzing biomolecular interactions by variable angle ellipsometry
  131. Paraboloidal ellipsometer with accurate retardance and latitude
  132. Development and traceability of a multifunctional microscope
  133. Flat-panel autostereoscopic display
  134. Diffractive laser optical encoder with high tolerance to high‐speed mechanical runout
  135. Fabricating polymeric microretardation arrays for autostereoscopic display system by CO 2 -laser heat processing technology
  136. Fabrication of a large F-number lenticular plate and its use as a small-angle flat-top diffuser in autostereoscopic display screens
  137. Design and implementation of a multilaser-based initializer for phase-change optical disks
  138. An Optical Inhomogeneous Surfaces Profiler
  139. Interferometric Metrology of Dynamic Properties of MEMS
  140. Optical configuration and color-representation range of a variable-pitch dot matrix holographic printer
  141. Binary deposition method using standard CMOS structural layers to fabricate optical gratings and microlenses
  142. Laser Doppler interferometer for vibration of rotating curved surfaces
  143. Design verifications of a linear laser encoder with high head-to-scale tolerance
  144. Cylindrical–type nanometer-resolution laser diffractive optical encoder
  145. Multifunctional microscope: design and construction of a full-field nonhomogeneous surface analysis metrology tool
  146. New methodology for measuring highly aberrated wavefronts induced by diffractive optical elements
  147. Signal Processing Algorithms for Doppler Effect Based Nanometer Positioning Systems
  148. A High Performance Doppler Interferometer for Advanced Optical Storage Systems
  149. Improving the accuracy of ellipsometers for multilayer film measurements using incident angle verification and retrieval
  150. Optical design and implementation of a variable-pitch dot matrix writer
  151. Expanding a color presentation range with true-color dot matrix holograms
  152. Optical design and implementation of a multi-functional miniature interferometer
  153. New method to fabricate diffractive blazed gratings by anisotropic etching on (110) silicon wafers
  154. Nematic liquid crystal variable retarder and retardation modulator
  155. Innovative miniature differential laser Doppler interferometer
  156. Large-format grating image hologram based on e-beam lithography
  157. Full-field phase-shifting holographic blind-hole technique for in-plane residual stress detection
  158. In-plane residual stress measurement with one axisymmetric phase-shifting holographic blind-hole fringe pattern
  159. Distributed piezoelectric polymer sensors - Theoretical and experimental results
  160. Analytical methods for photoelastic holography
  161. A novel biochip detection system based on lateral SPR wave propagation theory
  162. Bio-plasmonics nano/micro structure of surface plasmon resonance devices for biomedicine
  163. Surface plasmon resonance biochips for tuberculosis bacillus detection
  164. An implantable integrated SIGE FM transmitter for HRV biotelemetry
  165. A novel micro-scale recombining technique using lateral joining for a large-area molding with small features
  166. The Development of Virtual Testing Resource for Medical Devices in Hsin-Chu Biomedical Science Park
  167. In-situ monitoring of thickness of quartz membrane during batch chemical etching using a novel micromackined acoustic wave sensor