All Stories

  1. Understanding the active formation of a cathode–electrolyte interphase (CEI) layer with energy level band bending for lithium-ion batteries
  2. Metal Halide Perovskite Surfaces with Mixed A‐Site Cations: Atomic Structure and Device Stability
  3. Perovskite solar cells by vapor deposition based and assisted methods
  4. From film to ring: Quasi-circular inorganic lead halide perovskite grain induced growth of uniform lead silicate glass ring structure
  5. Correction to Air-Exposure Induced Dopant Redistribution and Energy Level Shifts in Spin-Coated Spiro-MeOTAD Films
  6. Investigating lithium metal anodes with nonaqueous electrolytes for safe and high-performance batteries
  7. Residual strain reduction leads to efficiency and operational stability improvements in flexible perovskite solar cells
  8. Recent progress on all-inorganic metal halide perovskite solar cells
  9. Spectral Stable Blue-Light-Emitting Diodes via Asymmetric Organic Diamine Based Dion–Jacobson Perovskites
  10. Atomic Level Insights into Metal Halide Perovskite Materials by Scanning Tunneling Microscopy and Spectroscopy
  11. Atomic Level Insights into Metal Halide Perovskite Materials by Scanning Tunneling Microscopy and Spectroscopy
  12. Narrow-Band Violet-Light-Emitting Diodes Based on Stable Cesium Lead Chloride Perovskite Nanocrystals
  13. A solid–liquid hybrid electrolyte for lithium ion batteries enabled by a single-body polymer/indium tin oxide architecture
  14. Strategies and methods for fabricating high quality metal halide perovskite thin films for solar cells
  15. Atomic Scale Investigation of the CuPc–MAPbX3 Interface and the Effect of Non-Stoichiometric Perovskite Films on Interfacial Structures
  16. Recent Progress on Metal Halide Perovskite Solar Minimodules
  17. Long-life lithium-sulfur batteries with high areal capacity based on coaxial CNTs@TiN-TiO2 sponge
  18. Phase Aggregation Suppression of Homogeneous Perovskites Processed in Ambient Condition toward Efficient Light‐Emitting Diodes
  19. Two-Dimensional Dion–Jacobson Structure Perovskites for Efficient Sky-Blue Light-Emitting Diodes
  20. Scalable Fabrication of >90 cm 2 Perovskite Solar Modules with >1000 h Operational Stability Based on the Intermediate Phase Strategy
  21. Atomic-scale insight into the enhanced surface stability of methylammonium lead iodide perovskite by controlled deposition of lead chloride
  22. Metal halide perovskite solar cells by modified chemical vapor deposition
  23. Metal halide perovskite-based flexible tandem solar cells: next-generation flexible photovoltaic technology
  24. In-situ passivation perovskite targeting efficient light-emitting diodes via spontaneously formed silica network
  25. CsPbBrxI3-x thin films with multiple ammonium ligands for low turn-on pure-red perovskite light-emitting diodes
  26. Photon Upconverting Solid Films with Improved Efficiency for Endowing Perovskite Solar Cells with Near‐Infrared Sensitivity
  27. A holistic approach to interface stabilization for efficient perovskite solar modules with over 2,000-hour operational stability
  28. Additives in metal halide perovskite films and their applications in solar cells
  29. 2D Derivative Phase Induced Growth of 3D All Inorganic Perovskite Micro–Nanowire Array Based Photodetectors
  30. The Impact of Atmosphere on Energetics of Lead Halide Perovskites
  31. Approaching isotropic transfer integrals in crystalline organic semiconductors
  32. Verringerung schädlicher Defekte für leistungsstarke Metallhalogenid‐Perowskit‐Solarzellen
  33. How far are we from attaining 10-year lifetime for metal halide perovskite solar cells?
  34. Inverse Growth of Large-Grain-Size and Stable Inorganic Perovskite Micronanowire Photodetectors
  35. Highly Efficient Perovskite Solar Cells Enabled by Multiple Ligand Passivation
  36. Organic additive engineering toward efficient perovskite light‐emitting diodes
  37. Increase the rigidity and hydrophobicity of perovskite by a molecular design
  38. Reducing Detrimental Defects for High‐Performance Metal Halide Perovskite Solar Cells
  39. Imaging of the Atomic Structure of All-Inorganic Halide Perovskites
  40. Efficient Anti-solvent-free Spin-Coated and Printed Sn-Perovskite Solar Cells with Crystal-Based Precursor Solutions
  41. Interface engineering strategies towards Cs2AgBiBr6 single-crystalline photodetectors with good Ohmic contact behaviours
  42. Rapid hybrid chemical vapor deposition for efficient and hysteresis-free perovskite solar modules with an operation lifetime exceeding 800 hours
  43. Surface Termination-Dependent Nanotribological Properties of Single-Crystal MAPbBr3 Surfaces
  44. Phase transition induced recrystallization and low surface potential barrier leading to 10.91%-efficient CsPbBr3 perovskite solar cells
  45. Progress of Surface Science Studies on ABX 3 ‐Based Metal Halide Perovskite Solar Cells
  46. Recent Progress of All‐Bromide Inorganic Perovskite Solar Cells
  47. Engineering Green-to-Blue Emitting CsPbBr3 Quantum-Dot Films with Efficient Ligand Passivation
  48. Surface Defect Dynamics in Organic–Inorganic Hybrid Perovskites: From Mechanism to Interfacial Properties
  49. Thermodynamically stabilized β-CsPbI 3 –based perovskite solar cells with efficiencies >18%
  50. Progress of All-inorganic Cesium Lead-free Perovskite Solar Cells
  51. Scalable Fabrication of Metal Halide Perovskite Solar Cells and Modules
  52. Carbon-Based Electrode Engineering Boosts the Efficiency of All Low-Temperature-Processed Perovskite Solar Cells
  53. Influences of Spiro-MeOTAD Hole Transport Layer on the Long-term Stabilities of Perovskite-based Solar Cells
  54. Perovskite Material and Solar Cell Research by Surface Science and Advanced Characterization
  55. Reduction of lead leakage from damaged lead halide perovskite solar modules using self-healing polymer-based encapsulation
  56. Improved SnO 2 Electron Transport Layers Solution‐Deposited at Near Room Temperature for Rigid or Flexible Perovskite Solar Cells with High Efficiencies
  57. Determination of Carrier Diffusion Length Using Transient Electron Photoemission Microscopy in the GaAs/InSe Heterojunction
  58. Significant THz absorption in CH3NH2 molecular defect-incorporated organic-inorganic hybrid perovskite thin film
  59. High Efficient Hole Extraction and Stable All‐Bromide Inorganic Perovskite Solar Cells via Derivative‐Phase Gradient Bandgap Architecture
  60. Degradation Mechanism and Relative Stability of Methylammonium Halide Based Perovskites Analyzed on the Basis of Acid–Base Theory
  61. Elucidating the Mechanism Involved in the Performance Improvement of Lithium‐Ion Transition Metal Oxide Battery by Conducting Polymer
  62. Negligible‐Pb‐Waste and Upscalable Perovskite Deposition Technology for High‐Operational‐Stability Perovskite Solar Modules
  63. A redox shuttle imparts operational durability to perovskite solar cells
  64. Highly Efficient and Stable Perovskite Solar Cells via Modification of Energy Levels at the Perovskite/Carbon Electrode Interface
  65. Unraveling the Impact of Halide Mixing on Perovskite Stability
  66. Highly stable and efficient all-inorganic lead-free perovskite solar cells with native-oxide passivation
  67. Accelerating hole extraction by inserting 2D Ti3C2-MXene interlayer to all inorganic perovskite solar cells with long-term stability
  68. Atomic-scale view of stability and degradation of single-crystal MAPbBr3 surfaces
  69. Hybrid chemical vapor deposition enables scalable and stable Cs-FA mixed cation perovskite solar modules with a designated area of 91.8 cm2 approaching 10% efficiency
  70. Lithium-ion batteries: outlook on present, future, and hybridized technologies
  71. Thermal degradation of formamidinium based lead halide perovskites into sym-triazine and hydrogen cyanide observed by coupled thermogravimetry-mass spectrometry analysis
  72. Scalable Fabrication of Stable High Efficiency Perovskite Solar Cells and Modules Utilizing Room Temperature Sputtered SnO 2 Electron Transport Layer
  73. Flexible and stable high-energy lithium-sulfur full batteries with only 100% oversized lithium
  74. Fabrication of efficient metal halide perovskite solar cells by vacuum thermal evaporation: A progress review
  75. Progress toward Stable Lead Halide Perovskite Solar Cells
  76. Gas-solid reaction based over one-micrometer thick stable perovskite films for efficient solar cells and modules
  77. Energy Level Alignment at Interfaces in Metal Halide Perovskite Solar Cells
  78. “Heat Wave” of Metal Halide Perovskite Solar Cells Continues in Phoenix
  79. Scalable solution coating of the absorber for perovskite solar cells
  80. The influence of secondary solvents on the morphology of a spiro-MeOTAD hole transport layer for lead halide perovskite solar cells
  81. Interfacial Flat-Lying Molecular Monolayers for Performance Enhancement in Organic Field-Effect Transistors
  82. Stacked-graphene layers as engineered solid-electrolyte interphase (SEI) grown by chemical vapour deposition for lithium-ion batteries
  83. Enhancing Optical, Electronic, Crystalline, and Morphological Properties of Cesium Lead Halide by Mn Substitution for High-Stability All-Inorganic Perovskite Solar Cells with Carbon Electrodes
  84. Spin-Coated Crystalline Molecular Monolayers for Performance Enhancement in Organic Field-Effect Transistors
  85. Advances and challenges to the commercialization of organic–inorganic halide perovskite solar cell technology
  86. High-throughput surface preparation for flexible slot die coated perovskite solar cells
  87. Research progress on organic–inorganic halide perovskite materials and solar cells
  88. Photodecomposition and thermal decomposition in methylammonium halide lead perovskites and inferred design principles to increase photovoltaic device stability
  89. Themed issue on perovskite solar cells: research on metal halide perovskite solar cells towards deeper understanding, upscalable fabrication, long-term stability and Pb-free alternatives
  90. Transition metal speciation as a degradation mechanism with the formation of a solid-electrolyte interphase (SEI) in Ni-rich transition metal oxide cathodes
  91. Scanning Probe Microscopy Applied to Organic-Inorganic Halide Perovskite Materials and Solar Cells
  92. Improved Efficiency and Stability of Perovskite Solar Cells Induced by CO Functionalized Hydrophobic Ammonium‐Based Additives
  93. Combination of Hybrid CVD and Cation Exchange for Upscaling Cs-Substituted Mixed Cation Perovskite Solar Cells with High Efficiency and Stability
  94. Recent Advances in Spiro‐MeOTAD Hole Transport Material and Its Applications in Organic–Inorganic Halide Perovskite Solar Cells
  95. Application of Methylamine Gas in Fabricating Organic-Inorganic Hybrid Perovskite Solar Cells
  96. Fully Solution-Processed TCO-Free Semitransparent Perovskite Solar Cells for Tandem and Flexible Applications
  97. Ultrahigh mobility and efficient charge injection in monolayer organic thin-film transistors on boron nitride
  98. Interfacial Modification of Perovskite Solar Cells Using an Ultrathin MAI Layer Leads to Enhanced Energy Level Alignment, Efficiencies, and Reproducibility
  99. Perovskite Solar Cells—Towards Commercialization
  100. Progress on Perovskite Materials and Solar Cells with Mixed Cations and Halide Anions
  101. Low‐Cost Alternative High‐Performance Hole‐Transport Material for Perovskite Solar Cells and Its Comparative Study with Conventional SPIRO‐OMeTAD
  102. Methylammonium Lead Bromide Perovskite Light-Emitting Diodes by Chemical Vapor Deposition
  103. Engineering Interface Structure to Improve Efficiency and Stability of Organometal Halide Perovskite Solar Cells
  104. Graphene specimen support technique for low voltage STEM imaging
  105. Advances and Obstacles on Perovskite Solar Cell Research from Material Properties to Photovoltaic Function
  106. Transferrable optimization of spray-coated PbI2 films for perovskite solar cell fabrication
  107. Accelerated degradation of methylammonium lead iodide perovskites induced by exposure to iodine vapour
  108. The Effect of Impurities on the Impedance Spectroscopy Response of CH3NH3PbI3 Perovskite Solar Cells
  109. Surface and Interface Aspects of Organometal Halide Perovskite Materials and Solar Cells
  110. Measurement of high carrier mobility in graphene in an aqueous electrolyte environment
  111. Role of the Dopants on the Morphological and Transport Properties of Spiro-MeOTAD Hole Transport Layer
  112. Transamidation of dimethylformamide during alkylammonium lead triiodide film formation for perovskite solar cells
  113. Photovoltaics: Moisture and Oxygen Enhance Conductivity of LiTFSI-Doped Spiro-MeOTAD Hole Transport Layer in Perovskite Solar Cells (Adv. Mater. Interfaces 13/2016)
  114. Moisture and Oxygen Enhance Conductivity of LiTFSI‐Doped Spiro‐MeOTAD Hole Transport Layer in Perovskite Solar Cells
  115. Dopant interdiffusion effects in n-i-p structured spiro-OMeTAD hole transport layer of organometal halide perovskite solar cells
  116. The presence of CH3NH2 neutral species in organometal halide perovskite films
  117. Organometal halide perovskite thin films and solar cells by vapor deposition
  118. Chemical vapor deposition grown formamidinium perovskite solar modules with high steady state power and thermal stability
  119. Post-annealing of MAPbI3 perovskite films with methylamine for efficient perovskite solar cells
  120. Properties and solar cell applications of Pb-free perovskite films formed by vapor deposition
  121. Rapid perovskite formation by CH3NH2 gas-induced intercalation and reaction of PbI2
  122. Thermal degradation of CH3NH3PbI3 perovskite into NH3 and CH3I gases observed by coupled thermogravimetry–mass spectrometry analysis
  123. Universal energy level tailoring of self-organized hole extraction layers in organic solar cells and organic–inorganic hybrid perovskite solar cells
  124. Real-Space Imaging of the Atomic Structure of Organic–Inorganic Perovskite
  125. Silver Iodide Formation in Methyl Ammonium Lead Iodide Perovskite Solar Cells with Silver Top Electrodes
  126. Substantial improvement of perovskite solar cells stability by pinhole-free hole transport layer with doping engineering
  127. Ultrathin polycrystalline 6,13-Bis(triisopropylsilylethynyl)-pentacene films
  128. Influence of Air Annealing on High Efficiency Planar Structure Perovskite Solar Cells
  129. Flat-Lying Semiconductor–Insulator Interfacial Layer in DNTT Thin Films
  130. Air-Exposure Induced Dopant Redistribution and Energy Level Shifts in Spin-Coated Spiro-MeOTAD Films
  131. Hysteresis effects on perovskite-based solar cells
  132. Mixed interlayers at the interface between PEDOT:PSS and conjugated polymers provide charge transport control
  133. Smooth perovskite thin films and efficient perovskite solar cells prepared by the hybrid deposition method
  134. Pinhole-free hole transport layers significantly improve the stability of MAPbI3-based perovskite solar cells under operating conditions
  135. Large formamidinium lead trihalide perovskite solar cells using chemical vapor deposition with high reproducibility and tunable chlorine concentrations
  136. [Paper] p-Doping of Squaraine with F4-TCNQ by Solution Processing
  137. Large changes of graphene conductance as a function of lattice orientation between stacked layers
  138. Reliability improvement of bulk-heterojunction organic solar cell by using reduced graphene oxide as hole-transport layer
  139. Only the chemical state of Indium changes in Mn-doped In3Sb1Te2 (Mn: 10 at.%) during multi-level resistance changes
  140. What may affect the lifetime of perovskite solar cells?
  141. Pre-treatment of flexible electrodes improves performance
  142. Observation of chemical separation of In3Sb1Te2 thin film during phase transition
  143. Perovskite solar cells by the hybrid deposition method
  144. Perovksite solar cells fabrication by CVD
  145. Sensitivity to Molecular Order of the Electrical Conductivity in Oligothiophene Monolayer Films
  146. Hybrid Heterocycle-Containing Electron-Transport Materials Synthesized by Regioselective Suzuki Cross-Coupling Reactions for Highly Efficient Phosphorescent OLEDs with Unprecedented Low Operating Voltage
  147. n-Type doping of organic semiconductors via solution
  148. Charge transport across metal/molecular (alkyl) monolayer-Si junctions is dominated by the LUMO level
  149. Ultra-flat coplanar electrodes for controlled electrical contact of molecular films
  150. n‐Doping of Organic Electronic Materials using Air‐Stable Organometallics
  151. Review on AFM studies on organic films
  152. Electrical Transport Properties of Oligothiophene-Based Molecular Films Studied by Current Sensing Atomic Force Microscopy
  153. Hexaazatriphenylene (HAT) versus tri‐HAT: The Bigger the Better?
  154. Filled and empty states of alkanethiol monolayer on Au (111): Fermi level asymmetry and implications for electron transport
  155. Soluble fullerene derivatives: The effect of electronic structure on transistor performance and air stability
  156. Electronic structure and band alignment of 9,10-phenanthrenequinone passivated silicon surfaces
  157. Scanning Tunneling Microscopy in Surface Science, Nanoscience and Catalysis, Michael Bowker and Philip R. Davies (Eds.). Wiley-VCH, Weinheim, 2010, 244 pages. Print ISBN 9783527319824; Online ISBN 9783527628827
  158. Remote doping of a pentacene transistor: Control of charge transfer by molecular-level engineering
  159. Probing nanotribological and electrical properties of organic molecular films with atomic force microscopy
  160. Relative permittivity and Hubbard U of pentacene extracted from scanning tunneling microscopy studies of p-doped films
  161. The Influence of Film Morphology in High‐Mobility Small‐Molecule:Polymer Blend Organic Transistors
  162. Silicon surface passivation by an organic overlayer of 9,10-phenanthrenequinone
  163. Influence of Molecular Ordering on Electrical and Friction Properties of ω-(trans-4-Stilbene)Alkylthiol Self-Assembled Monolayers on Au (111)
  164. Modification of gold source and drain electrodes by self-assembled monolayer in staggered n- and p-channel organic thin film transistors
  165. A Molybdenum Dithiolene Complex asp-Dopant for Hole-Transport Materials: A Multitechnique Experimental and Theoretical Investigation
  166. Use of a High Electron-Affinity Molybdenum Dithiolene Complex to p-Dope Hole-Transport Layers
  167. Electrical transport and mechanical properties of alkylsilane self-assembled monolayers on silicon surfaces probed by atomic force microscopy
  168. Noncontact to contact tunneling microscopy in self-assembled monolayers of alkylthiols on gold
  169. Electronic contribution to friction on GaAs: An atomic force microscope study
  170. Surface Species Formed by the Adsorption and Dissociation of Water Molecules on a Ru(0001) Surface Containing a Small Coverage of Carbon Atoms Studied by Scanning Tunneling Microscopy
  171. Mechanical and Charge Transport Properties of Alkanethiol Self-Assembled Monolayers on a Au(111) Surface:  The Role of Molecular Tilt
  172. Influence of carrier density on the friction properties of silicon p n junctions
  173. Frequency-controlled interaction between magnetic microspheres
  174. Band gaps from ring resonators and structural periodicity
  175. Anisotropy properties of magnetic colloidal materials
  176. Influences of geometry of particles on electrorheological fluids
  177. Effect of zinc doping on the microstructure in YBCO