All Stories

  1. In Vitro and In Vivo Characterisation of a Mucoadhesive Buccal Film Loaded with Doxycycline Hyclate for Topical Application in Periodontitis

    Article • Pharmaceutics, February 2023, MDPI AG

    Mircea Cristian Dudescu

  2. Analyzing the Effects of Calcium Nitrate over White Portland Cement: A Multi-Scale Approach

    Article • Materials, December 2022, MDPI AG

    Mircea Cristian Dudescu

  3. Effect of infill pattern on fatigue characteristics of 3D printed polymers

    Article • Materials Today Proceedings, November 2022, Elsevier

    Mircea Cristian Dudescu

  4. Evaluation of Bond Strength of Four Different Root Canal Sealers

    Article • Materials, July 2022, MDPI AG

    Mircea Cristian Dudescu

  5. Effects of Disinfection and Steam Sterilization on the Mechanical Properties of 3D SLA- and DLP-Printed Surgical Guides for Orthodontic Implant Placement

    Article • Polymers, May 2022, MDPI AG

    Mircea Cristian Dudescu

  6. Numerical and Experimental Evaluation of a Battery Cell under Impact Load

    Article • Batteries, May 2022, MDPI AG

    Mircea Cristian Dudescu

  7. Numerical Investigation of the Infill Rate upon Mechanical Proprieties of 3D-Printed Materials

    Article • Polymers, May 2022, MDPI AG

    Mircea Cristian Dudescu

  8. Characterization of the Influence of an Accelerator upon the Porosity and Strength of Cement Paste by Nuclear Magnetic Resonance (NMR) Relaxometry

    Article • Analytical Letters, May 2022, Taylor & Francis

    Mircea Cristian Dudescu

  9. Antimicrobial Properties of Bacterial Cellulose Films Enriched with Bioactive Herbal Extracts Obtained by Microwave-Assisted Extraction

    Article • Polymers, March 2022, MDPI AG

    Mircea Cristian Dudescu

  10. Correction: Bodea et al. Optimization of Moist and Oven-Dried Bacterial Cellulose Production for Functional Properties. Polymers 2021, 13, 2088

    Article • Polymers, November 2021, MDPI AG

    Mircea Cristian Dudescu

  11. Generation of Computational 3D Models of Human Bones Based on STL Data and CAD Software Packages

    Article • Applied Sciences, August 2021, MDPI AG

    Mircea Cristian Dudescu

  12. Optimization of Moist and Oven-Dried Bacterial Cellulose Production for Functional Properties

    Article • Polymers, June 2021, MDPI AG

    Mircea Cristian Dudescu

  13. Mechanical Evaluation of Solvent Casted Poly(3-hydroxybutyrate) Films Derived from the Storage Polyesters Produced by Halomonas elongata DSM 2581T

    Article • Journal of Polymers and the Environment, June 2021, Springer Science + Business Media

    Mircea Cristian Dudescu

  14. Design, Manufacturing and Test of CFRP Front Hood Concepts for a Light-Weight Vehicle

    Article • Polymers, April 2021, MDPI AG

    Mircea Cristian Dudescu

  15. 3-Aminopropyl-Triethoxysilane Functionalized Graphene Oxide for Silane-Based Consolidation Treatments to Increase Mortar Performances

    Article • Journal of Nanoscience and Nanotechnology, April 2021, American Scientific Publishers

    Mircea Cristian Dudescu

  16. Mixture of Graphene Oxide/Phosphoric Acid/Melamine as Coating for Improved Fire Protective Performance and Enhancement of Surface Electrical Properties on Wood Chipboard

    Article • Journal of Nanoscience and Nanotechnology, April 2021, American Scientific Publishers

    Mircea Cristian Dudescu

  17. Assessing Fracture Resistance of non Vital Teeth Using Two Different Composite Systems: Short-Fibre-Reinforced Composite and Glass Fibre Post with Microfilled Hybrid Composite

    Article • Materiale Plastice, January 2021, Revista de Chimie SRL

    Mircea Cristian Dudescu

  18. Analysis of the Thermoelastic Damping Effect in Electrostatically Actuated MEMS Resonators

    Article • Mathematics, July 2020, MDPI AG

    Mircea Cristian Dudescu

  19. Determining the tribological properties of different 3D printing filaments

    Article • IOP Conference Series Materials Science and Engineering, January 2020, Institute of Physics Publishing

    Mircea Cristian Dudescu

  20. Investigation of Mechanical Behaviour of Expanded Polystyrene Under Compressive and Bending Loadings

    Article • Materiale Plastice, July 2019, Revista de Chimie SRL

    Mircea Cristian Dudescu

  21. Fabrication and Mechanical Characterization of Short Fiber-Glass Epoxy Composites

    Article • Materials Performance and Characterization, January 2019, ASTM International

    Mircea Cristian Dudescu

  22. Experimental research regarding carbon fiber/epoxy material manufactured by autoclave process

    Article • MATEC Web of Conferences, January 2019, EDP Sciences

    Mircea Cristian Dudescu

  23. Surface Properties and Maximum Insertion Energy of Sterilized Orthodontic Mini-Implants with Different Chemical Materials

    Article • Revista de Chimie, December 2018, Revista de Chimie SRL

    Mircea Cristian Dudescu

  24. Temporal bone trauma effects on auditory anatomical structures in mastoid obliteration

    Article • European Archives of Oto-Rhino-Laryngology, December 2018, Springer Science + Business Media

    Mircea Cristian Dudescu

  25. Oxidative Chemical Hybrid Formulations for Internal Bleaching of Endodontically Treated Teeth

    Article • Revista de Chimie, August 2018, Revista de Chimie SRL

    Mircea Cristian Dudescu

  26. Corrigendum to “Bioactive Ti-base biomaterial with sustained anti-bacterial response for endosseous applications” [React. Funct. Polym. 125(2018) 37–46]

    Article • Reactive and Functional Polymers, June 2018, Elsevier

    Mircea Cristian Dudescu

  27. Potential Use of Galium verum Essential Oil for Antibacterial Properties in Gelatin Based Hydrogels Prepared by Microwave Irradiation Technique

    Article • Revista de Chimie, April 2018, Revista de Chimie SRL

    Mircea Cristian Dudescu

  28. Bioactive Ti-base biomaterial with sustained anti-bacterial response for endosseous applications

    Article • Reactive and Functional Polymers, April 2018, Elsevier

    Mircea Cristian Dudescu, Dr Violeta Pascalau

  29. Relative humidity influence on adhesion effect in MEMS flexible structures

    Article • Microsystem Technologies, March 2018, Springer Science + Business Media

    Mircea Cristian Dudescu

  30. Thermal expansion coefficient determination of polylactic acid using digital image correlation

    Article • E3S Web of Conferences, January 2018, EDP Sciences

    Mircea Cristian Dudescu

  31. Dynamic behavior of smart microelectromechanical systems in industrial applications

    Article • January 2018, Elsevier

    Mircea Cristian Dudescu

  32. Effects of Raster Orientation, Infill Rate and Infill Pattern on the Mechanical Properties of 3D Printed Materials

    Article • ACTA Universitatis Cibiniensis, December 2017, De Gruyter

    Mircea Cristian Dudescu

  33. Nanocharacterization of the adhesion effect and bending stiffness in optical MEMS

    Article • Applied Surface Science, November 2017, Elsevier

    Mircea Cristian Dudescu

  34. Double whip stitch for free graft femoral fixation in anterior cruciate ligament reconstruction: experimental study on porcine model

    Article • Clujul Medical, July 2017, Clujul Medical

    Mircea Cristian Dudescu

  35. Nanocharacterization of the Mechanical and Tribological Behavior of MEMS Micromembranes

    Article • May 2017, IntechOpen

    Mircea Cristian Dudescu

  36. Relative humidity effect on pull-off forces in MEMS flexible structures measured by AFM

    Article • May 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Mircea Cristian Dudescu

  37. Design, fabrication and characterization of RF MEMS switches with robust contact

    Article • May 2017, Institute of Electrical & Electronics Engineers (IEEE)

    Mircea Cristian Dudescu

  38. Investigation on the contact behaviour of MEMS micromembrane with serpentine hinges

    Article • IOP Conference Series Materials Science and Engineering, February 2017, Institute of Physics Publishing

    Mircea Cristian Dudescu

  39. Analysis of the bending stiffness and adhesion effect in RF-MEMS structures

    Article • IOP Conference Series Materials Science and Engineering, February 2017, Institute of Physics Publishing

    Mircea Cristian Dudescu

  40. Bending and compression tests for PA 2200 parts obtained using Selective Laser Sintering method

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Eng Cristina Miron-Borzan, Mircea Cristian Dudescu

  41. Influence of the stacking sequence on the mechanical proprieties of glass fiber reinforced polymer

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Mircea Cristian Dudescu

  42. Design and manufacturing front hood for electric vehicle by carbon fibber

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Calin Neamtu, Mircea Cristian Dudescu

  43. Carbon epoxy front hood for an electrical city vehicle

    Article • MATEC Web of Conferences, January 2017, EDP Sciences

    Calin Neamtu, Mircea Cristian Dudescu

  44. Versatile self-assembled graphene oxide membranes obtained under ambient conditions by using a water–ethanol suspension

    Article • Journal of Materials Chemistry A, January 2017, Royal Society of Chemistry

    Mircea Cristian Dudescu, Dr Lucian Baia

  45. EVALUATION OF THE MECHANICAL PROPERTIES AND SURFACE TOPOGRAPHY OF AS-RECEIVED, IMERSSED AND AS-RETRIEVED ORTHODONTIC ARCHWIRES

    Article • Clujul Medical, December 2016, Clujul Medical

    Mircea Cristian Dudescu

  46. Dynamic response of a polysilicon microbridge driven by different electrostatic forces

    Article • October 2016, Institute of Electrical & Electronics Engineers (IEEE)

    Mircea Cristian Dudescu

  47. Calibration of a Shear Specimen

    Article • Solid State Phenomena, August 2016, Trans Tech Publications

    Dr Liviu Marsavina, Mircea Cristian Dudescu

  48. Effect of geometrical dimensions on the tribomechanical response of a gold micromembrane with bent beam hinges

    Article • IOP Conference Series Materials Science and Engineering, August 2016, Institute of Physics Publishing

    Mircea Cristian Dudescu

  49. Experimental investigation by atomic force microscopy on mechanical and tribological properties of thin films

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), May 2016, Carl Hanser Verlag

    Mircea Cristian Dudescu

  50. Reliability design of thermally actuated MEMS switches based on V-shape beams

    Article • Microsystem Technologies, January 2016, Springer Science + Business Media

    Mircea Cristian Dudescu

  51. Considerations Regarding the Optically Transparent Rigid Model for PIV Investigations. A Case Study. Part 2: Notes on the Failure of the Model

    Article • Energy Procedia, January 2016, Elsevier

    Mircea Cristian Dudescu

  52. Monitoring the Influence of Aminosilane on Cement Hydration Via Low-field NMR Relaxometry

    Article • Applied Magnetic Resonance, November 2015, Springer Science + Business Media

    Mircea Cristian Dudescu

  53. Static response and stiction analysis of MEMS micromembranes for optical applications

    Article • physica status solidi c, October 2015, Wiley

    Mircea Cristian Dudescu

  54. Lip Forces and Chewing Efficiency in Children with Peripheral Facial Paralysis

    Article • Neuropediatrics, May 2015, Thieme Publishing Group

    Dr Silviu Albu, Dr Aranka Ilea, Mircea Cristian Dudescu

  55. The effect of sensing area position on the mechanical response of mass-detecting cantilever sensor

    Article • Microsystem Technologies, April 2015, Springer Science + Business Media

    Mircea Cristian Dudescu

  56. Reliability design of thermally actuated MEMS switches supported by V -Beams

    Article • April 2015, Institute of Electrical & Electronics Engineers (IEEE)

    Mircea Cristian Dudescu

  57. The Use of Bone-Like Materials in Skull Base Traumatology

    Article • Key Engineering Materials, March 2015, Trans Tech Publications

    Dr Silviu Albu, Dr Aranka Ilea, Mircea Cristian Dudescu

  58. Customized implants with specific properties, made by selective laser melting

    Article • Rapid Prototyping Journal, January 2015, Emerald

    Dr Nicolae BALC, Prof Petru Berce, Mircea Cristian Dudescu

  59. Nanomechanical and nanotribological characterization of a MEMS micromembrane supported by two folded hinges

    Article • Analog Integrated Circuits and Signal Processing, January 2015, Springer Science + Business Media

    Mircea Cristian Dudescu

  60. Design and fabrication of a MEMS chevron-type thermal actuator

    Article • January 2015, American Institute of Physics

    Mircea Cristian Dudescu

  61. Reliability Design Based on Experimental Investigations of Paddle MEMS Cantilevers Used in Mass Sensing Applications

    Article • Sensor Letters, November 2014, American Scientific Publishers

    Mircea Cristian Dudescu

  62. Experimental Validation of a Finite Element Model of an Osteoporotic Human Femoral Bone Using Strain Gauge Measurement

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Mircea Cristian Dudescu

  63. V-Beam Thermal Actuator’s Performance Analysis Using Digital Image Correlation

    Article • Applied Mechanics and Materials, October 2014, Trans Tech Publications

    Mircea Cristian Dudescu

  64. Nanomechanical and nanotribological characterization of a MEMS micromembrame supported by two folded hinges

    Article • April 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Mircea Cristian Dudescu

  65. Size effect on the microbridges quality factor tested in free air space

    Article • April 2014, Institute of Electrical & Electronics Engineers (IEEE)

    Mircea Cristian Dudescu

  66. Role of Mastoid Pneumatization in Temporal Bone Fractures

    Article • American Journal of Neuroradiology, March 2014, American Society of Neuroradiology (ASNR)

    Dr Aranka Ilea, Mircea Cristian Dudescu

  67. State of Stress Determination in a Water Drinker by Numerical and Experimental Methods

    Article • Key Engineering Materials, March 2014, Trans Tech Publications

    Mircea Cristian Dudescu

  68. Measurement of Thermoplastics Tensile Proprieties Using Digital Image Correlation

    Article • Key Engineering Materials, March 2014, Trans Tech Publications

    Mircea Cristian Dudescu

  69. Deflection Determination of V-Beam Thermal Sensors Using Digital Image Correlation

    Article • Key Engineering Materials, March 2014, Trans Tech Publications

    Mircea Cristian Dudescu

  70. Analytical and Numerical Study on the Maximum Force Developed by a V-beam Thermal Actuator

    Article • Procedia Technology, January 2014, Elsevier

    Mircea Cristian Dudescu

  71. Dynamic behavior of smart MEMS in industrial applications

    Article • January 2014, Elsevier

    Mircea Cristian Dudescu

  72. Micro-tweezers Based on V-Beam Thermal Actuator

    Article • January 2014, Springer Science + Business Media

    Mircea Cristian Dudescu

  73. Research on Producing Complex Metal Parts with Lattice Structure by Selective Laser Melting

    Article • Applied Mechanics and Materials, August 2013, Trans Tech Publications

    Mircea Cristian Dudescu

  74. Design and Analysis of Carbon/Epoxy Composite Tubular Parts

    Article • Advanced Engineering Forum, June 2013, Trans Tech Publications

    Prof Petru Berce, Mircea Cristian Dudescu

  75. Nanomechanical studies and materials characterization of metal/polymer bilayer MEMS cantilevers

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), April 2013, Carl Hanser Verlag

    Mircea Cristian Dudescu

  76. Temperature effect on tribological and mechanical properties of MEMS

    Article • April 2013, Institute of Electrical & Electronics Engineers (IEEE)

    Mircea Cristian Dudescu

  77. Simulation and experimental analysis of thermo-mechanical behavior of microresonators under dynamic loading

    Article • Microsystem Technologies, January 2013, Springer Science + Business Media

    Mircea Cristian Dudescu

  78. Obtaining and Characterizing Alginate/k-Carrageenan Hydrogel Cross-Linked with Adipic Dihydrazide

    Article • Advances in Materials Science and Engineering, January 2013, Hindawi Publishing Corporation

    Mircea Cristian Dudescu

  79. The alginate/k-carrageenan ratio's influence on the properties of the cross-linked composite films

    Article • Journal of Alloys and Compounds, September 2012, Elsevier

    Mircea Cristian Dudescu

  80. Mechanical and tribological characterizations for reliability design of micromembranes

    Article • April 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Mircea Cristian Dudescu

  81. Analysis of a Dexterous Instrument for Minimally Invasive Procedures, Based on Bellows Actuators

    Article • January 2011, Springer Science + Business Media

    Mircea Cristian Dudescu

  82. Investigation of Non-Linear Springback for High Strength Steel Sheets by ESPI

    Article • Strain, June 2010, Wiley

    Mircea Cristian Dudescu

  83. Characterisation of Thermal Expansion Coefficient of Anisotropic Materials by Electronic Speckle Pattern Interferometry

    Article • Strain, August 2006, Wiley

    Mircea Cristian Dudescu