All Stories

  1. Iron Ore Sintering: Quality Indices

    Article • Mineral Processing and Extractive Metallurgy Review, May 2017, Taylor & Francis

    Dr Iñigo Ruiz-Bustinza

  2. Transformations in the Iron-Manganese-Oxygen-Carbon System Resulted from Treatment of Solar Energy with High Concentration

    Article • steel research international, March 2014, Wiley

    Dr Iñigo Ruiz-Bustinza

  3. IRON ORE SINTERING PART 2. QUALITY INDICES AND PRODUCTIVITY

    Article • DYNA, January 2014, Universidad Nacional de Colombia

    Dr Iñigo Ruiz-Bustinza

  4. Utilization of a waste from titanium oxide industry for the synthesis of sodium ferrate by gas–solid reactions

    Article • Thermochimica Acta, January 2014, Elsevier

    Dr Iñigo Ruiz-Bustinza

  5. The Influence of Gangue and Additives on the Divalent Iron Content of Magnetite Pellets

    Article • steel research international, December 2013, Wiley

    Dr Iñigo Ruiz-Bustinza

  6. Monitoring and control of hearth refractory wear to improve blast furnace operation

    Article • Ironmaking & Steelmaking, July 2013, Taylor & Francis

    Dr Iñigo Ruiz-Bustinza

  7. Synthesis of potassium ferrate using residual ferrous sulfate as iron bearing material

    Article • Journal of Physics Conference Series, March 2013, Institute of Physics Publishing

    Dr Iñigo Ruiz-Bustinza

  8. Magnetite Production from Steel Wastes with Concentrated Solar Energy

    Article • steel research international, October 2012, Wiley

    Dr Iñigo Ruiz-Bustinza

  9. New Techniques to Detect the Suitable Time to Close the Tap Hole of a Blast Furnace

    Article • steel research international, June 2012, Wiley

    Dr Iñigo Ruiz-Bustinza

  10. NEW BOF SLAGS CONTAINING SODIUM AND MANGANESE

    Article • Metallurgy and Foundry Engineering, January 2011, AGHU University of Science and Technology Press

    Dr Iñigo Ruiz-Bustinza

  11. MECHANISMS KNOWLEDGE OF THE FLOW AND WEAR IN THE BLAST FURNACE CRUCIBLE WITH THE NODAL WEAR MODEL

    Article • Metallurgy and Foundry Engineering, January 2011, AGHU University of Science and Technology Press

    Dr Iñigo Ruiz-Bustinza

  12. Situación estimada de la zona cohesiva en el horno alto

    Article • Revista de Metalurgia, August 2010, Departmento de Publicaciones del CSIC

    Dr Iñigo Ruiz-Bustinza

  13. Control del avance del frente de llama en el lecho de sinterización de minerales de hierro

    Article • Revista de Metalurgia, June 2010, Departmento de Publicaciones del CSIC

    Dr Iñigo Ruiz-Bustinza

  14. A New “User-friendly” Blast Furnace Advisory Control System Using a Neural Network Temperature Profile Classifier

    Article • ISIJ International, January 2010, Iron and Steel Institute of Japan

    Dr Iñigo Ruiz-Bustinza

  15. Results of the Application of the Mdn in the Improvement of the Design of an Electrical Furnace that produces Low Carbon Ferromanganese

    Article • ISIJ International, January 2010, Iron and Steel Institute of Japan

    Dr Iñigo Ruiz-Bustinza

  16. A New Advisor System to Detect the ‘Tap Hole Whistling and Splashing’ in a Blast Furnace

    Article • Archives of Metallurgy and Materials, January 2010, Polish Academy of Sciences Chancellery

    Dr Iñigo Ruiz-Bustinza

  17. The Nodal Wear Model (NWM) as an Alternative to Understand the Mechanisms of Flow and Wear in the Blast Furnace Crucible

    Article • Archives of Metallurgy and Materials, January 2010, Polish Academy of Sciences Chancellery

    Dr Iñigo Ruiz-Bustinza

  18. An overview study of chlorination reactions applied to the primary extraction and recycling of metals and to the synthesis of new reagents

    Article • Thermochimica Acta, November 2009, Elsevier

    Dr Iñigo Ruiz-Bustinza

  19. Bottom design optimisation of electric arc furnace for ferromanganese production using nodal wear model

    Article • Ironmaking & Steelmaking, October 2009, Taylor & Francis

    Dr Iñigo Ruiz-Bustinza