All Stories

  1. Application of in-situ liquid cell transmission electron microscopy in corrosion studies: a critical review of challenges and achievements

    Article • CORROSION, November 2019, NACE International

    Dr Johannes M.C. Mol

  2. Adhesive Bonding and Corrosion Performance Investigated as a Function of Aluminum Oxide Chemistry and Adhesives

    Article • CORROSION, August 2017, NACE International

    Dr Johannes M.C. Mol

  3. Hydrogen sorption and desorption related properties of Pd-alloys determined by cyclic voltammetry

    Article • Journal of Electroanalytical Chemistry, November 2014, Elsevier

    Dr Johannes M.C. Mol

  4. Simulated and measured response of oxygen SECM-measurements in presence of a corrosion process

    Article • Electrochimica Acta, November 2014, Elsevier

    Dr Johannes M.C. Mol

  5. A Critical Appraisal of the Interpretation of Electrochemical Noise for Corrosion Studies

    Article • CORROSION, October 2014, NACE International

    Dr Johannes M.C. Mol, Axel Homborg

  6. Influence of surface hydroxyls on the formation of Zr-based conversion coatings on AA6014 aluminum alloy

    Article • Surface and Coatings Technology, September 2014, Elsevier

    Dr Johannes M.C. Mol

  7. Detection of microbiologically influenced corrosion by electrochemical noise transients

    Article • Electrochimica Acta, August 2014, Elsevier

    Dr Johannes M.C. Mol, Axel Homborg

  8. Contributor contact details

    Article • January 2014, Elsevier

    Juan de Damborenea, Dr Johannes M.C. Mol

  9. The cost and availability of rare earth-based corrosion inhibitors

    Article • January 2014, Elsevier

    Dr Johannes M.C. Mol

  10. Novel and self-healing anticorrosion coatings using rare earth compounds

    Article • January 2014, Elsevier

    Dr Johannes M.C. Mol

  11. Initiation and growth of modified Zr-based conversion coatings on multi-metal surfaces

    Article • Surface and Coatings Technology, December 2013, Elsevier

    Dr Johannes M.C. Mol

  12. Aminobenzoate modified MgAl hydrotalcites as a novel smart additive of reinforced concrete for anticorrosion applications

    Article • Construction and Building Materials, October 2013, Elsevier

    Dr Johannes M.C. Mol

  13. Novel electrochemical approach to study corrosion mechanism of Al–Au wire–bond pad interconnections

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, September 2013, Taylor & Francis

    Dr Johannes M.C. Mol

  14. Ship ballast tanks a review from microbial corrosion and electrochemical point of view

    Article • Ocean Engineering, September 2013, Elsevier

    Dr Johannes M.C. Mol

  15. A combined electron probe micro analysis and scanning Kelvin probe force microscopy study of a modified AA4xxx/AA3xxx aluminium brazing sheet

    Article • Electrochimica Acta, August 2013, Elsevier

    Dr Johannes M.C. Mol

  16. Transient analysis through Hilbert spectra of electrochemical noise signals for the identification of localized corrosion of stainless steel

    Article • Electrochimica Acta, August 2013, Elsevier

    Dr Johannes M.C. Mol, Axel Homborg

  17. Water uptake in thin nylon 6 films as measured by electrochemical impedance spectroscopy and magnetic resonance imaging

    Article • Electrochimica Acta, April 2013, Elsevier

    Dr Johannes M.C. Mol

  18. Unravelling the corrosion inhibition mechanisms of bi-functional inhibitors by EIS and SEM–EDS

    Article • Corrosion Science, April 2013, Elsevier

    Dr Johannes M.C. Mol

  19. Quasi in situ analytical TEM to investigate electrochemically induced microstructural changes in alloys: AA2024-T3 as an example

    Article • Corrosion Science, April 2013, Elsevier

    Dr Johannes M.C. Mol

  20. An infrared spectroscopic study of sodium silicate adsorption on porous anodic alumina

    Article • Surface and Interface Analysis, February 2013, Wiley

    Dr Johannes M.C. Mol

  21. In Situ Study of Buried Interfacial Bonding Mechanisms of Carboxylic Polymers on Zn Surfaces

    Article • The Journal of Physical Chemistry C, February 2013, American Chemical Society (ACS)

    Dr Johannes M.C. Mol

  22. Influence of pretreatments and aging on the adhesion performance of epoxy-coated aluminum

    Article • Surface and Coatings Technology, January 2013, Elsevier

    Dr Johannes M.C. Mol

  23. Scanning Kelvin probe force microscopy as a means of predicting the electrochemical characteristics of the surface of a modified AA4xxx/AA3xxx (Al alloys) brazing sheet

    Article • Electrochimica Acta, January 2013, Elsevier

    Dr Johannes M.C. Mol

  24. Tailoring the release of encapsulated corrosion inhibitors from damaged coatings: Controlled release kinetics by overlapping diffusion fronts

    Article • Progress in Organic Coatings, September 2012, Elsevier

    Dr Johannes M.C. Mol

  25. A new approach to study local corrosion processes on steel surfaces by combining different microscopic techniques

    Article • Applied Surface Science, September 2012, Elsevier

    Dr Johannes M.C. Mol

  26. Electrochemical depth profiling of multilayer metallic structures: An aluminum brazing sheet

    Article • Electrochimica Acta, August 2012, Elsevier

    Dr Johannes M.C. Mol

  27. The effect of brazing process on microstructure evolution and corrosion performance of a modified AA4XXX/AA3XXX brazing sheet

    Article • Corrosion Science, May 2012, Elsevier

    Dr Johannes M.C. Mol

  28. Time–frequency methods for trend removal in electrochemical noise data

    Article • Electrochimica Acta, May 2012, Elsevier

    Dr Johannes M.C. Mol, Axel Homborg

  29. A new high-throughput method for corrosion testing

    Article • Corrosion Science, May 2012, Elsevier

    Dr Johannes M.C. Mol

  30. Effects of Zinc Surface Acid-Based Properties on Formation Mechanisms and Interfacial Bonding Properties of Zirconium-Based Conversion Layers

    Article • The Journal of Physical Chemistry C, April 2012, American Chemical Society (ACS)

    Dr Johannes M.C. Mol

  31. A combinatorial matrix of rare earth chloride mixtures as corrosion inhibitors of AA2024-T3: Optimisation using potentiodynamic polarisation and EIS

    Article • Electrochimica Acta, April 2012, Elsevier

    Dr Johannes M.C. Mol

  32. Influence of material related parameters in Sea Water Acidified Accelerated Test, reliability analysis and electrochemical evaluation of the test for aluminum brazing sheet

    Article • Corrosion Science, December 2011, Elsevier

    Dr Johannes M.C. Mol

  33. A combined mechanical, microscopic and local electrochemical evaluation of self-healing properties of shape-memory polyurethane coatings

    Article • Electrochimica Acta, November 2011, Elsevier

    Dr Johannes M.C. Mol

  34. A combined redox-competition and negative-feedback SECM study of self-healing anticorrosive coatings

    Article • Electrochemistry Communications, October 2011, Elsevier

    Dr Johannes M.C. Mol

  35. Electrochemical analysis of the adsorption and desorption behaviors of carboxylic acid and anhydride monomers onto zinc surfaces

    Article • Electrochimica Acta, October 2011, Elsevier

    Dr Johannes M.C. Mol

  36. The effect of inhibitor structure on the corrosion of AA2024 and AA7075

    Article • Corrosion Science, June 2011, Elsevier

    Dr Johannes M.C. Mol

  37. Influence of the surface activation and local pitting susceptibility on the AC-electrograining of aluminium alloys

    Article • Corrosion Science, March 2011, Elsevier

    Dr Johannes M.C. Mol

  38. The characterisation and performance of Ce(dbp)3-inhibited epoxy coatings

    Article • Progress in Organic Coatings, February 2011, Elsevier

    Dr Johannes M.C. Mol

  39. Self-healing anticorrosive organic coating based on an encapsulated water reactive silyl ester: Synthesis and proof of concept

    Article • Progress in Organic Coatings, February 2011, Elsevier

    Dr Johannes M.C. Mol

  40. SECM study of defect repair in self-healing polymer coatings on metals

    Article • Electrochemistry Communications, February 2011, Elsevier

    Dr Johannes M.C. Mol

  41. Corrosion Performance of Composite Galvanic Coatings with Variable Concentration of Polymeric Nanoaggregates and/or Cr(III) Conversion Layers

    Article • January 2011, The Electrochemical Society

    Dr Johannes M.C. Mol

  42. New approach in microstructural analysis of a modified AA4XXX/AA3XXX brazing sheet before and after brazing

    Article • January 2011, Elsevier

    Dr Johannes M.C. Mol

  43. A comparison of the interfacial bonding properties of carboxylic acid functional groups on zinc and iron substrates

    Article • Electrochimica Acta, January 2011, Elsevier

    Dr Johannes M.C. Mol

  44. Adhesion at Al-hydroxide-polymer interfaces: Influence of chemistry and evidence for microscopic self-pinning

    Article • Materials Science and Engineering A, August 2010, Elsevier

    Dr Johannes M.C. Mol

  45. The influence of pH on corrosion inhibitor selection for 2024-T3 aluminium alloy assessed by high-throughput multielectrode and potentiodynamic testing

    Article • Electrochimica Acta, February 2010, Elsevier

    Dr Johannes M.C. Mol

  46. A Preliminary Study on Cathodic Prevention in Reinforced Mortar

    Article • January 2010, The Electrochemical Society

    Dr Johannes M.C. Mol

  47. Electrochemical and Microstructural Studies in Reinforced Mortar, Modified with Core-Shell Micelles

    Article • January 2010, The Electrochemical Society

    Dr Johannes M.C. Mol

  48. High-throughput channel arrays for inhibitor testing: Proof of concept for AA2024-T3

    Article • Corrosion Science, October 2009, Elsevier

    Dr Johannes M.C. Mol

  49. Barrier and adhesion properties of anti-corrosion coatings based on surfactant-free latexes from anhydride-containing polymers

    Article • Progress in Organic Coatings, April 2009, Elsevier

    Dr Johannes M.C. Mol

  50. A rapid screening multi-electrode method for the evaluation of corrosion inhibitors

    Article • Electrochimica Acta, April 2009, Elsevier

    Dr Johannes M.C. Mol

  51. Corrosion resistance of Zn–Co–Fe alloy coatings on high strength steel

    Article • Surface and Coatings Technology, February 2009, Elsevier

    Dr Johannes M.C. Mol

  52. A combined composition and morphology study of electrodeposited Zn–Co and Zn–Co–Fe alloy coatings

    Article • Surface and Coatings Technology, March 2008, Elsevier

    Dr Johannes M.C. Mol

  53. Organic coatings for marine and shipping applications

    Article • January 2008, Elsevier

    Dr Johannes M.C. Mol

  54. Obtaining of Zn composite coatings

    Article • January 2008, The Electrochemical Society

    Dr Johannes M.C. Mol, Professor Petar Dimitrov Petrov, Professor Nikolai Stoyanov Boshkov

  55. Electrodeposition of Zn–Co and Zn–Co–Fe alloys from acidic chloride electrolytes

    Article • Surface and Coatings Technology, November 2007, Elsevier

    Dr Johannes M.C. Mol

  56. Influence of uniaxial deformation on the corrosion performance of pre-coated packaging steel

    Article • Progress in Organic Coatings, November 2007, Elsevier

    Dr Johannes M.C. Mol

  57. Cathodic inhibition and anomalous electrodeposition of Zn–Co alloys

    Article • Electrochimica Acta, May 2007, Elsevier

    Dr Johannes M.C. Mol

  58. An integrated study on the effect of pre- and post-extrusion heat treatments and surface treatment on the filiform corrosion properties of an aluminium extrusion alloy

    Article • Corrosion Science, November 2005, Elsevier

    Dr Johannes M.C. Mol

  59. A morphological study of filiform corrosive attack on cerated AA2024-T351 aluminium alloy

    Article • Corrosion Science, January 2005, Elsevier

    Dr Johannes M.C. Mol

  60. A morphological study of filiform corrosive attack on chromated and alkaline-cleaned AA2024-T351 aluminium alloy

    Article • Corrosion Science, May 2004, Elsevier

    Dr Johannes M.C. Mol