All Stories

  1. Corrosion behavior and mechanical property of Mg-4Li-1Ca alloys under micro-compressive stress
  2. In vitro corrosion resistance and dual antibacterial ability of curcumin loaded composite coatings on AZ31 alloy: Effect of amorphous calcium carbonate
  3. Antibacterial Activity and Biocompatibility of Ag-Montmorillonite/Chitosan Colloidal Dressing in a Skin Infection Rat Model: An In Vitro and In Vivo Study
  4. Comparison of microstructure, mechanical property, and degradation rate of Mg–1Li–1Ca and Mg–4Li–1Ca alloys
  5. Robust damage warning and healing tracing strategy for anticorrosion coatings on magnesium alloy AZ31enabled by polydopamine fluorophores
  6. Superior discharge performance of Mg-air battery: The influence of anodic intermetallic compounds Mg41Nd5 in Mg–4Li-3Nd-0.2Zn alloy
  7. Advances in Mg–Al-layered double hydroxide steam coatings on Mg alloys: A review
  8. Insight into degradation and mechanical performance of polyelectrolytes-induced hydroxyapatite interlocking coating on Mg-3Nd-1Li-0.2Zn alloys
  9. Degradation and biocompatibility of genipin crosslinked polyelectrolyte films on biomedical magnesium alloy via layer-by-layer assembly
  10. Corrosion resistance and mechanisms of smart micro-arc oxidation/epoxy resin coatings on AZ31 Mg alloy: Strategic positioning of nanocontainers
  11. Biodegradation mechanisms of pure Mg in presence of glucose, vitamin C, and citric acid
  12. Corrosion resistance and mechanisms of Nd(NO3)3 and polyvinyl alcohol organic-inorganic hybrid material incorporated MAO coatings on AZ31 Mg alloy
  13. In vitro degradation and multi-antibacterial mechanisms of β-cyclodextrin@curcumin embodied Mg(OH)2/MAO coating on AZ31 magnesium alloy
  14. In Vitro Degradation and Photoactivated Antibacterial Activity of a Hemin-CaP Microsphere-Loaded Coating on Pure Magnesium
  15. In vitro degradation, photo-dynamic and thermal antibacterial activities of Cu-bearing chlorophyllin-induced Ca–P coating on magnesium alloy AZ31
  16. Influence of intermetallic Al-Mn particles on in-situ steam Mg-Al-LDH coating on AZ31 magnesium alloy
  17. Protein conformation and electric attraction adsorption mechanisms on anodized magnesium alloy by molecular dynamics simulations
  18. Strontium‐Doped Hydroxyapatite Promotes Osteogenic Differentiation of Bone Marrow Mesenchymal Stem Cells in Osteoporotic Rats through the CaSR‐JAK2/STAT3 Signaling Pathway
  19. In vitro degradation and biocompatibility of vitamin C loaded Ca-P coating on a magnesium alloy for bioimplant applications
  20. Anti–corrosion and self-healing coatings with polyaniline/epoxy copolymer–urea–formaldehyde microcapsules for rusty steel sheets
  21. Enhanced corrosion resistance, antibacterial activity and biocompatibility of gentamicin-montmorillonite coating on Mg alloy-in vitro and in vivo studies
  22. Advances in hydroxyapatite coatings on biodegradable magnesium and its alloys
  23. In vitro degradation resistance of glucose and L-cysteine-bioinspired Schiff-base anodic Ca–P coating on AZ31 magnesium alloy
  24. Advances in bioorganic molecules inspired degradation and surface modifications on Mg and its alloys
  25. Corrosion resistance of Mg-Al-LDH steam coating on AZ80 Mg alloy: Effects of citric acid pretreatment and intermetallic compounds
  26. Corrosion self-diagnosing and self-repairing polymeric coatings based on zeolitic imidazolate framework decorated hydroxyapatite nanocontainer on steel
  27. Corrosion resistance of the layer-by-layer assembled multilayers on Mg alloy: Effects of covalent cross-linking
  28. Polyphosphate assisted hydrothermal synthesis of hydroxyapatite coating on Mg alloys: Enhanced mechanical properties and corrosion resistance
  29. Chemical Conversion Coatings: Fundamentals and Recent Advances
  30. Corrosion self-warning and repair tracking of polymeric coatings based on stimulus responsive nanosensors
  31. MAO-Based Composite Coatings
  32. Recent Approaches for Enhancing Corrosion Resistance of PEO/MAO-Coated Mg and Its Alloys
  33. Advances in coatings on magnesium alloys for cardiovascular stents – A review
  34. Insight to corrosion mechanism of 90/10 copper-nickel alloys under different sea depths
  35. Corrosion resistance, antibacterial activity and drug release of ciprofloxacin-loaded micro-arc oxidation/silane coating on magnesium alloy AZ31
  36. Dealloying corrosion of anodic and nanometric Mg41Nd5 in solid solution-treated Mg-3Nd-1Li-0.2Zn alloy
  37. Corrosion resistance of Ca-P coating induced by layer-by-layer assembled polyvinylpyrrolidone/DNA multilayer on magnesium AZ31 alloy
  38. Corrosion Resistance of Superhydrophobic Mg(OH)2/Calcium Myristate Composite Coating on Magnesium Alloy AZ31
  39. Advances in layer-by-layer self-assembled coatings upon biodegradable magnesium alloys
  40. In vitro corrosion resistance, antibacterial activity and cytocompatibility of a layer-by-layer assembled DNA coating on magnesium alloy
  41. Microbial ingress and in vitro degradation enhanced by glucose on bioabsorbable Mg–Li–Ca alloy
  42. Corrosion Resistance and Durability of Superhydrophobic Coating on AZ31 Mg Alloy via One-Step Electrodeposition
  43. Corrosion resistance of Mg−Al LDH/Mg(OH)2/silane−Ce hybrid coating on magnesium alloy AZ31
  44. Synthesis of glutamate intercalated Mg-Al layered double hydroxides: influence of stirring and aging time
  45. Corrosion resistance and superhydrophobicity of one-step polypropylene coating on anodized AZ31 Mg alloy
  46. Biocorrosion resistance and biocompatibility of Mg–Al layered double hydroxide/poly-L-glutamic acid hybrid coating on magnesium alloy AZ31
  47. Biocorrosion resistance and biocompatibility of Mg-Al layered double hydroxide/poly(L-lactic acid) hybrid coating on magnesium alloy AZ31
  48. Self-catalytic degradation of iron-bearing chemical conversion coating on magnesium alloys — Influence of Fe content
  49. Corrosion resistance of an amino acid-bioinspired calcium phosphate coating on magnesium alloy AZ31
  50. Biodegradation behavior of micro-arc oxidation coating on magnesium alloy-from a protein perspective
  51. In vitro degradation and cytocompatibility of a low temperature in-situ grown self-healing Mg-Al LDH coating on MAO-coated magnesium alloy AZ31
  52. In vitro degradation of pure magnesium―the synergetic influences of glucose and albumin
  53. Biodegradation, hemocompatibility and covalent bonding mechanism of electrografting polyethylacrylate coating on Mg alloy for cardiovascular stent
  54. In vitro and in vivo biodegradation and biocompatibility of an MMT/BSA composite coating upon magnesium alloy AZ31
  55. Corrosion resistance and electrical conductivity of a nano ATO-doped MAO/methyltrimethoxysilane composite coating on magnesium alloy AZ31
  56. Advance in Antibacterial Magnesium Alloys and Surface Coatings on Magnesium Alloys: A Review
  57. Corrosion resistance and tunable release of ciprofloxacin-loaded multilayers on magnesium alloy: Effects of SiO2 nanoparticles
  58. Corrosion resistance of one-step superhydrophobic polypropylene coating on magnesium hydroxide-pretreated magnesium alloy AZ31
  59. A triple‐layered hybrid coating with self‐organized microporous polymer film on magnesium for biodegradable implant applications
  60. Advances in coatings on biodegradable magnesium alloys
  61. Corrosion resistance of self-cleaning silane/polypropylene composite coatings on magnesium alloy AZ31
  62. In vitro corrosion resistance of a Ta2O5 nanofilm on MAO coated magnesium alloy AZ31 by atomic layer deposition
  63. In vitro corrosion resistance of layer-by-layer assembled polyacrylic acid multilayers induced Ca–P coating on magnesium alloy AZ31
  64. Layer-by-layer assembly of gentamicin-based antibacterial multilayers on Ti alloy
  65. Mo-V-Nb-O-based catalysts for low-temperature selective oxidation of Cα-OH lignin model compounds
  66. Durable lubricant-infused coating on a magnesium alloy substrate with anti-biofouling and anti-corrosion properties and excellent thermally assisted healing ability
  67. Corrosion resistance of dodecanethiol-modified magnesium hydroxide coating on AZ31 magnesium alloy
  68. In vitro corrosion of pure Mg in phosphate buffer solution—Influences of isoelectric point and molecular structure of amino acids
  69. Corrosion resistance of a silane/ceria modified Mg-Al-layered double hydroxide on AA5005 aluminum alloy
  70. Corrosion resistance of copolymerization of acrylamide and acrylic acid grafted graphene oxide composite coating on magnesium alloy
  71. Corrosion resistance and antibacterial activity of zinc-loaded montmorillonite coatings on biodegradable magnesium alloy AZ31
  72. Electrochemical polymerization of dopamine with/without subsequent PLLA coating on Mg-Zn-Y-Nd alloy
  73. Corrosion resistance and antibacterial activity of hydroxyapatite coating induced by ciprofloxacin-loaded polymeric multilayers on magnesium alloy
  74. Corrosion and Wear Resistance of Micro‐Arc Oxidation Composite Coatings on Magnesium Alloy AZ31—The Influence of Inclusions of Carbon Spheres
  75. Deflated balloon-like nitrogen-rich sulfur-containing hierarchical porous carbons for high-rate supercapacitors
  76. New strategy of improving the dispersibility of acrylamide-functionalized graphene oxide in aqueous solution by RAFT copolymerization of acrylamide and acrylic acid
  77. Corrosion resistance and drug release profile of gentamicin-loaded polyelectrolyte multilayers on magnesium alloys: Effects of heat treatment
  78. Corrosion resistance and antibacterial properties of hydroxyapatite coating induced by gentamicin-loaded polymeric multilayers on magnesium alloys
  79. Corrosion resistance of in-situ growth of nano-sized Mg(OH)2 on micro-arc oxidized magnesium alloy AZ31—Influence of EDTA
  80. Graphene Oxide Reinforced Iron Matrix Composite With Enhanced Biodegradation Rate Prepared by Selective Laser Melting
  81. Interfacial study of the formation mechanism of corrosion resistant strontium phosphate coatings upon Mg-3Al-4.3Ca-0.1Mn
  82. Fe-doped Ag2S with excellent peroxidase-like activity for colorimetric determination of H2O2
  83. Corrosion resistance of Mg(OH)2/Mg–Al-layered double hydroxide coatings on magnesium alloy AZ31: influence of hydrolysis degree of silane
  84. Optimized preparation of Co-Pi decorated g-C3N4@ZnO shell-core nanorod array for its improved photoelectrochemical performance and stability
  85. Recent advances in biodegradation controls over Mg alloys for bone fracture management: A review
  86. Corrosion resistance of bioinspired DNA-induced Ca–P coating on biodegradable magnesium alloy
  87. Influence of solution treatment on the corrosion fatigue behavior of an as-forged Mg-Zn-Y-Zr alloy
  88. In vitro corrosion resistance and antibacterial performance of novel tin dioxide-doped calcium phosphate coating on degradable Mg-1Li-1Ca alloy
  89. Fundamental Theory of Biodegradable Metals—Definition, Criteria, and Design
  90. Corrosion resistance of nanostructured magnesium hydroxide coating on magnesium alloy AZ31: influence of EDTA
  91. Corrosion resistance of a self-healing multilayer film based on SiO2 and CeO2 nanoparticles layer-by-layer assembly on Mg alloys
  92. Corrosion resistance and antibacterial effects of hydroxyapatite coating induced by polyacrylic acid and gentamicin sulfate on magnesium alloy
  93. Corrosion resistance of glucose-induced hydrothermal calcium phosphate coating on pure magnesium
  94. Enhanced peroxidase‐like activity of MMT‐supported cuprous oxide nanocomposites toward rapid colorimetric estimation of H2O2
  95. In vitro corrosion resistance of a layer-by-layer assembled DNA coating on magnesium alloy
  96. Corrosion resistance of a ceria/polymethyltrimethoxysilane modified Mg-Al-layered double hydroxide on AZ31 magnesium alloy
  97. In vitro corrosion of micro-arc oxidation coating on Mg-1Li-1Ca alloy — The influence of intermetallic compound Mg2Ca
  98. Advances in functionalized polymer coatings on biodegradable magnesium alloys – A review
  99. Corrosion resistance of a novel SnO2-doped dicalcium phosphate coating on AZ31 magnesium alloy
  100. Corrosion resistance and antibacterial properties of polysiloxane modified layer-by-layer assembled self-healing coating on magnesium alloy
  101. Exfoliation corrosion of extruded Mg-Li-Ca alloy
  102. Layered double hydroxide coatings on magnesium alloys: A review
  103. Effectively enhanced photocatalytic hydrogen production performance of one-pot synthesized MoS2 clusters/CdS nanorod heterojunction material under visible light
  104. In vitro and in vivo investigation on biodegradable Mg-Li-Ca alloys for bone implant application
  105. Self-degradation of micro-arc oxidation/chitosan composite coating on Mg-4Li-1Ca alloy
  106. In vitro corrosion of magnesium alloy AZ31 — a synergetic influence of glucose and Tris
  107. A comparison of corrosion inhibition of magnesium aluminum and zinc aluminum vanadate intercalated layered double hydroxides on magnesium alloys
  108. Enhanced visible light-driven activity of TiO2 nanotube array photoanode co-sensitized by “green” AgInS2 photosensitizer and In2S3 buffer layer
  109. Corrosion resistance and adhesion strength of a spin-assisted layer-by-layer assembled coating on AZ31 magnesium alloy
  110. In Vitro Corrosion and Antibacterial Performance of Micro-Arc Oxidation Coating on AZ31 Magnesium Alloy: Effects of Tannic Acid
  111. Study on the Mechanism of the Photoelectrochemical Effect on the Initial NaCl-Induced Atmospheric Corrosion Process of Pure Copper Exposed in Humidified Pure Air
  112. Corrosion resistance of a superhydrophobic surface on micro-arc oxidation coated Mg-Li-Ca alloy
  113. Corrosion resistance of a superhydrophobic micro-arc oxidation coating on Mg-4Li-1Ca alloy
  114. Corrosion resistance of ceria/polymethyltrimethoxysilane modified magnesium hydroxide coating on AZ31 magnesium alloy
  115. Electrodeposition of TiO 2 layer-by-layer assembled composite coating and silane treatment on Mg alloy for corrosion resistance
  116. New insights into the effect of Tris-HCl and Tris on corrosion of magnesium alloy in presence of bicarbonate, sulfate, hydrogen phosphate and dihydrogen phosphate ions
  117. In vitro corrosion of Mg–Ca alloy — The influence of glucose content
  118. In vitro degradation and biocompatibility of Mg-Li-Ca alloys—the influence of Li content
  119. Constructing ternary polyaniline-graphene-TiO2 hybrids with enhanced photoelectrochemical performance in photo-generated cathodic protection
  120. In Vitro Degradation of Pure Magnesium―The Effects of Glucose and/or Amino Acid
  121. Corrosion Resistance of Silane-Modified Hydroxyapatite Films on Degradable Magnesium Alloys
  122. In vitro corrosion resistance and antibacterial properties of layer-by-layer assembled chitosan/poly-L-glutamic acid coating on AZ31 magnesium alloys
  123. Corrosion resistance of a self-healing micro-arc oxidation/polymethyltrimethoxysilane composite coating on magnesium alloy AZ31
  124. Degradation mechanism of micro-arc oxidation coatings on biodegradable Mg-Ca alloys: The influence of porosity
  125. Effect of the second phases on corrosion behavior of the Mg-Al-Zn alloys
  126. Photogenerated cathodic protection and invalidation of silane/TiO2 hybrid coatings
  127. Hydrothermal synthesis and photoelectrochemical performance enhancement of TiO 2 /graphene composite in photo-generated cathodic protection
  128. Blood compatibility of zinc–calcium phosphate conversion coating on Mg–1.33Li–0.6Ca alloy
  129. Research Progress of Graphene‐Based Rubber Nanocomposites
  130. In vitro Degradation of Pure Mg for Esophageal Stent in Artificial Saliva
  131. Corrosion Resistance of the Superhydrophobic Mg(OH)2/Mg-Al Layered Double Hydroxide Coatings on Magnesium Alloys
  132. In Vitro Corrosion and Cytocompatibility of a Microarc Oxidation Coating and Poly(l-lactic acid) Composite Coating on Mg–1Li–1Ca Alloy for Orthopedic Implants
  133. In vitro corrosion and antibacterial performance of polysiloxane and poly(acrylic acid)/gentamicin sulfate composite coatings on AZ31 alloy
  134. Corrosion resistance of biodegradable polymeric layer-by-layer coatings on magnesium alloy AZ31
  135. Corrosion resistance of cerium-doped zinc calcium phosphate chemical conversion coatings on AZ31 magnesium alloy
  136. In vitrocorrosion of pure magnesium and AZ91 alloy—the influence of thin electrolyte layer thickness
  137. Corrosion resistance of layer-by-layer assembled polyvinylpyrrolidone/polyacrylic acid and amorphous silica films on AZ31 magnesium alloys
  138. In vitro corrosion and antibacterial properties of layer-by-layer assembled GS/PSS coating on AZ31 magnesium alloys
  139. Corrosion Resistance of Superhydrophobic Mg–Al Layered Double Hydroxide Coatings on Aluminum Alloys
  140. Fabrication of the Superhydrophobic Surface on Magnesium Alloy and Its Corrosion Resistance
  141. Corrosion of in-situ grown MgAl-LDH coating on aluminum alloy
  142. Corrosion resistance of Zn–Al layered double hydroxide/poly(lactic acid) composite coating on magnesium alloy AZ31
  143. In vitro degradation of pure Mg in response to glucose
  144. In vitro corrosion of as-extruded Mg–Ca alloys—The influence of Ca concentration
  145. Corrosion resistance of in-situ Mg–Al hydrotalcite conversion film on AZ31 magnesium alloy by one-step formation
  146. Corrosion Resistance of Silane-Modified Hydroxide Zinc Carbonate Film on AZ31 Magnesium Alloy
  147. Mechanical and corrosion properties of Al/Ti film on magnesium alloy AZ31B
  148. Soluble polyaniline nanofibers prepared via surfactant-free emulsion polymerization
  149. Corrosion resistance of calcium-modified zinc phosphate conversion coatings on magnesium–aluminium alloys
  150. Corrosion resistance of Mg–Al-LDH coating on magnesium alloy AZ31
  151. In vitro degradation of MAO/PLA coating on Mg-1.21Li-1.12Ca-1.0Y alloy
  152. In vitro corrosion of Mg–1.21Li–1.12Ca–1Y alloy
  153. Microstructural evolution and delayed hydride cracking of FSW-AZ31 magnesium alloy during SSRT
  154. Preface for the special issue on light metals as biomaterials
  155. Corrosion of magnesium alloy AZ31: The influence of bicarbonate, sulphate, hydrogen phosphate and dihydrogen phosphate ions in saline solution
  156. Cr<SUB>2</SUB>O<SUB>3</SUB> Nanoparticles Modified TiO<SUB>2</SUB> Nanotubes for Enhancing Visible Photoelectrochemical Performance
  157. In vitro corrosion of Mg-6Zn-1Mn-4Sn-1.5Nd/0.5Y alloys
  158. Corrosion and characterisation of dual phase Mg–Li–Ca alloy in Hank’s solution: The influence of microstructural features
  159. Corrosion of molybdate intercalated hydrotalcite coating on AZ31 Mg alloy
  160. Self-assembled silane film and silver nanoparticles coating on magnesium alloys for corrosion resistance and antibacterial applications
  161. Influence of solution temperature on corrosion resistance of Zn-Ca phosphate conversion coating on biomedical Mg-Li-Ca alloys
  162. A critical discussion on influence of loading frequency on fatigue crack propagation behavior for extruded Mg–Al–Zn alloys
  163. Structure and Infrared Radiation Properties of Metal Oxides-Doped Cordierites Using Graded Sintering Synthesis
  164. Influence of Silane on Corrosion Performance of Silane-Modified Acrylate Interpenetrating Polymer Network Coating on Magnesium Alloy AZ31
  165. Characteristics of the functionally graded coating fabricated by plasma transferred arc centrifugal cladding
  166. Corrosion of an extruded magnesium alloy ZK60 component—The role of microstructural features
  167. Characterization of calcium-modified zinc phosphate conversion coatings and their influences on corrosion resistance of AZ31 alloy
  168. In vitro corrosion degradation behaviour of Mg–Ca alloy in the presence of albumin
  169. Comparison of calcium phosphate coatings on Mg–Al and Mg–Ca alloys and their corrosion behavior in Hank's solution
  170. Comparison in characterization of composite and sol-gel coating on AZ31 magnesium alloy
  171. Preparation of calcium phosphate coatings on Mg-1.0Ca alloy
  172. Influence of pH values on electroless Ni-P-SiC plating on AZ91D magnesium alloy
  173. Influence of silane on corrosion resistance of magnesium alloy AZ31 with thermally sprayed aluminum coatings
  174. IgG Antibodies against Deamidated Gliadin Peptides for Diagnosis of Celiac Disease in Patients with IgA Deficiency
  175. Influence of microstructure on tensile properties and fatigue crack growth in extruded magnesium alloy AM60
  176. Corrosion of friction stir welded magnesium alloy AM50
  177. Fatigue crack propagation behavior of an as-extruded magnesium alloy AZ80
  178. Influence of load frequency and ageing heat treatment on fatigue crack propagation rate of as-extruded AZ61 alloy
  179. Thermodynamics of Oxidation on Pb-Free Solders at Elevated Temperature
  180. Formation Enthalpy, Free-Energy and Activity Coefficients of Sn-Pb Eutectic Solders
  181. Corrosion Behavior of Magnesium Alloy AX53 in Simulated Body Fluids
  182. Characterization and wear resistance of macro-arc oxidation coating on magnesium alloy AZ91 in simulated body fluids
  183. Microstructure evolution and tensile properties of friction-stir-welded AM50 magnesium alloy
  184. Progress and Challenge for Magnesium Alloys as Biomaterials
  185. Corrosion Behavior of TiO2 Coating on Magnesium Alloy AM60 in Hank’s Solution
  186. A study on the SCC susceptibility of friction stir welded AZ31 Mg sheet
  187. Effects of Post Heat Treatment on the Interfacial Characteristics of Aluminum Coated AZ91D Magnesium Alloy
  188. Effect of Temperature and Relative Humidity on Fatigue Crack Propagation Behavior of AZ61 Magnesium Alloy
  189. Effect of Temperature and Relative Humidity on Fatigue Crack Propagation Behavior of AZ61 Magnesium Alloy
  190. Effects of Post Heat Treatment on the Interfacial Characteristics of Aluminum Coated AZ91D Magnesium Alloy
  191. Review of studies on corrosion of magnesium alloys
  192. A Comparative Study on the Fretting Wear Resistant Properties of AZ91D and AM60B Magnesium Alloys
  193. Fatigue and Corrosion Fatigue of Magnesium Alloys
  194. Fatigue and Corrosion Fatigue of Magnesium Alloys
  195. A Comparative Study on the Fretting Wear Resistant Properties of AZ91D and AM60B Magnesium Alloys
  196. 10.4028/0-87849-397-2.609