All Stories

  1. Effect of electrolytic composition on current efficiency and alloy composition in electrowinning of Pr-Mg alloys using chloride electrolyte

    Article • Mineral Processing and Extractive Metallurgy Transactions of the Institutions of Mining and Metallurgy, October 2019, Taylor & Francis

    Professor Vivekanand Kain

  2. Relating General and Phase Specific Corrosion in a Super Duplex Stainless Steel with Phase Specific Microstructure Evolution

    Article • CORROSION, September 2019, NACE International

    Professor Vivekanand Kain

  3. Structural characterisation of lateritic nickel ore of Indian origin

    Article • Mineral Processing and Extractive Metallurgy Transactions of the Institutions of Mining and Metallurgy, March 2019, Taylor & Francis

    Dr Sreenivas T, Professor Vivekanand Kain

  4. Separation of terbium from aqueous phase employing hollow fibre supported liquid membrane with EHEHPA as carrier

    Article • Separation Science and Technology, November 2018, Taylor & Francis

    Professor Vivekanand Kain

  5. Cracking of superheater tube in a captive power plant

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, March 2018, Taylor & Francis

    Professor Vivekanand Kain

  6. Synthesis of magnetite by coprecipitation and sintering and its characterization

    Article • Materials and Manufacturing Processes, November 2017, Taylor & Francis

    Professor Vivekanand Kain

  7. CFD study of flow accelerated corrosion in 3D elbows

    Article • Annals of Nuclear Energy, July 2014, Elsevier

    Professor Vivekanand Kain

  8. Unsteady turbulent flow in 90° bend under the wall thinning degradation environment

    Article • Nuclear Engineering and Design, February 2014, Elsevier

    Professor Vivekanand Kain

  9. Failure analysis of copper tube used in a refrigerating plant

    Article • Engineering Failure Analysis, February 2014, Elsevier

    Professor Vivekanand Kain

  10. Welding failure of as-fabricated component of aluminum alloy 5052

    Article • Engineering Failure Analysis, December 2013, Elsevier

    Professor Vivekanand Kain

  11. Corrosion of Non-Sensitized Austenitic Stainless Steels in Nitric Acid Environment: An Electrochemical Approach

    Article • Advanced Materials Research, September 2013, Trans Tech Publications

    Professor Vivekanand Kain

  12. Studying the Mechanism behind Stress Corrosion Cracking of Non Sensitized 304L Austenitic Stainless Steel

    Article • Advanced Materials Research, September 2013, Trans Tech Publications

    Professor Vivekanand Kain

  13. Macro and Micro Electrochemical Techniques to Study Influence of Sigma Phase Formation in a Duplex Stainless Steel

    Article • Advanced Materials Research, September 2013, Trans Tech Publications

    Professor Vivekanand Kain

  14. Effect of Oxidation on Corrosion Behavior of Austenitic Stainless Steel 304L Welds

    Article • Advanced Materials Research, September 2013, Trans Tech Publications

    Professor Vivekanand Kain

  15. Anodic Polarization Behavior of Cold Worked Austenitic Stainless Steel

    Article • Advanced Materials Research, September 2013, Trans Tech Publications

    Professor Vivekanand Kain

  16. Temper Embrittlement and Corrosion Behaviour of Martensitic Stainless Steel 420

    Article • Advanced Materials Research, September 2013, Trans Tech Publications

    Professor Vivekanand Kain

  17. Methods for making alloy 600 resistant to sensitization and intergranular corrosion

    Article • Corrosion Science, May 2013, Elsevier

    Professor Vivekanand Kain

  18. Effect of reverted austenite on mechanical properties of precipitation hardenable 17-4 stainlesssteel

    Article • Materials Science and Engineering A, April 2013, Elsevier

    Professor Vivekanand Kain

  19. Microstructural and electrochemical characterisation of heat-treated 347 stainless steel with different phases

    Article • Corrosion Science, February 2013, Elsevier

    Professor Vivekanand Kain

  20. High temperature oxidation behavior of AISI 304L stainless steel—Effect of surface working operations

    Article • Applied Surface Science, January 2013, Elsevier

    Professor Vivekanand Kain

  21. Role of grain boundary nature and residual strain in controlling sensitisation of type 304 stainless steel

    Article • Corrosion Science, January 2013, Elsevier

    Professor Vivekanand Kain

  22. On the role of residual strain in controlling sensitisation of twin-boundary engineered type 304 stainless steel

    Article • Journal of Nuclear Materials, January 2013, Elsevier

    Professor Vivekanand Kain

  23. Flow accelerated corrosion of carbon steel feeder pipes from pressurized heavy water reactors

    Article • Journal of Nuclear Materials, October 2012, Elsevier

    Professor Vivekanand Kain

  24. Methodology based on potential measurement for predicting corrosion behaviour of SS 304L in boiling nitric acid containing oxidising ions

    Article • Corrosion Engineering Science and Technology The International Journal of Corrosion Processes and Corrosion Control, February 2012, Taylor & Francis

    Professor Vivekanand Kain

  25. Low temperature thermal aging of austenitic stainless steel welds: Kinetics and effects on mechanical properties

    Article • Materials Science and Engineering A, February 2012, Elsevier

    Professor Vivekanand Kain

  26. Corrosion-Resistant Materials

    Article • January 2012, Elsevier

    Professor Vivekanand Kain

  27. Low temperature thermal ageing embrittlement of austenitic stainless steel welds and its electrochemical assessment

    Article • Corrosion Science, January 2012, Elsevier

    Professor Vivekanand Kain

  28. End Grain Corrosion: Establishing Microstructural Causes and Preventive Steps

    Article • Materials Science Forum, December 2011, Trans Tech Publications

    Professor Vivekanand Kain

  29. Electrochemical Characterization of Low Temperature Thermal Aging Embrittlement of Stainless Steel 304L Weld

    Article • Materials Science Forum, December 2011, Trans Tech Publications

    Professor Vivekanand Kain

  30. Flow accelerated corrosion: Experience from examination of components from nuclear power plants

    Article • Engineering Failure Analysis, December 2011, Elsevier

    Professor Vivekanand Kain

  31. IGSCC of Non-Sensitised Austenitic Stainless Steels in BWR Environment – Effect of Deformation Mode on Grain Boundary Susceptibility

    Article • Materials Science Forum, December 2011, Trans Tech Publications

    Professor Vivekanand Kain

  32. Accelerated Corrosion of a Boiler Chimney: Causes and Preventive Steps

    Article • Journal of Failure Analysis and Prevention, October 2011, Springer Science + Business Media

    Professor Vivekanand Kain

  33. Role of residual stresses induced by industrial fabrication on stress corrosion cracking susceptibility of austenitic stainless steel

    Article • Materials & Design (1980-2015), August 2011, Elsevier

    Professor Vivekanand Kain

  34. The role of niobium carbide in radiation induced segregation behaviour of type 347 austenitic stainless steel

    Article • Journal of Nuclear Materials, August 2011, Elsevier

    Professor Vivekanand Kain

  35. Failure of 2.25Cr–1Mo steel superheater tubes in a fluidized bed combustor due to fireside corrosion

    Article • Materials Characterization, January 2011, Elsevier

    Professor Vivekanand Kain

  36. List of reviewers

    Article • January 2011, Elsevier

    Professor Vivekanand Kain

  37. Microstructural changes in AISI 304L stainless steel due to surface machining: Effect on its susceptibility to chloride stress corrosion cracking

    Article • Journal of Nuclear Materials, August 2010, Elsevier

    Professor Vivekanand Kain

  38. Optimisation of the hot conditioning of carbon steel surfaces of primary heat transport system of Pressurized Heavy Water Reactors using electrochemical impedance spectroscopy

    Article • Journal of Nuclear Materials, June 2010, Elsevier

    Professor Vivekanand Kain

  39. Effect of dissolved oxygen on oxidation and hydrogen pick up behaviour—Zircaloy vs Zr–Nb alloys

    Article • Nuclear Engineering and Design, May 2010, Elsevier

    Professor Vivekanand Kain

  40. Effect of surface machining and cold working on the ambient temperature chloride stress corrosion cracking susceptibility of AISI 304L stainless steel

    Article • Materials Science and Engineering A, January 2010, Elsevier

    Professor Vivekanand Kain

  41. CONTROLLING CORROSION IN NITRIC ACID ENVIRONMENTS: CURRENT UNDERSTANDING AND RECENT DEVELOPMENTS

    Article • Corrosion Reviews, December 2009, De Gruyter

    Professor Vivekanand Kain

  42. Characterisation of the oxide layer on carbon steel during hot conditioning of primary heat transport systems in heavy-water reactors

    Article • Corrosion Science, May 2009, Elsevier

    Professor Vivekanand Kain

  43. Flow accelerated corrosion and its control measures for the secondary circuit pipelines in Indian nuclear power plants

    Article • Journal of Nuclear Materials, December 2008, Elsevier

    Professor Vivekanand Kain

  44. Embrittlement of a Duplex Stainless Steel in Acidic Environment Under Applied Cathodic Potentials

    Article • Journal of Materials Engineering and Performance, October 2008, Springer Science + Business Media

    Professor Vivekanand Kain

  45. Embrittlement cracking of a stabilized stainless steel wire mesh in an ammonia converter

    Article • January 2008, Elsevier

    Professor Vivekanand Kain

  46. Controlling End-Grain Corrosion of Austenitic Stainless Steels

    Article • Journal of Materials Engineering and Performance, June 2007, Springer Science + Business Media

    Professor Vivekanand Kain

  47. Depth profiling of nitrogen using 429keV and 897keV resonances in the 15N(p,αγ)12C reaction

    Article • Nuclear Instruments and Methods in Physics Research Section B Beam Interactions with Materials and Atoms, November 2005, Elsevier

    Professor Vivekanand Kain

  48. High corrosion resistant Ti–5%Ta–1.8%Nb alloy for fuel reprocessing application

    Article • Journal of Nuclear Materials, October 2003, Elsevier

    Professor Vivekanand Kain

  49. Development of a single loop EPR test method and its relation to grain boundary microchemistry for alloy 600

    Article • Journal of Nuclear Materials, April 2002, Elsevier

    Professor Vivekanand Kain

  50. Electrochemical Transients Observed during Slow Strain Rate Test of Alloy 600 in Borated and Lithiated High Temperature Water.

    Article • JSME International Journal Series A, January 2002, Japan Society of Mechanical Engineers

    Professor Vivekanand Kain

  51. Environmental Degradation of Materials during Wet Storage of Spent Nuclear Fuels

    Article • Journal of Materials Engineering and Performance, June 2000, Springer Science + Business Media

    Professor Vivekanand Kain