All Stories

  1. The subtle difference between Galinstan (R) and eutectic GaInSn
  2. Comparative study of enhanced adsorption-photodegradation activity using activated biochar composited with Ag3PO4 or Ag6Si2O7 in wastewater treatment and disinfection: Effects and mechanisms
  3. Influence of Cellulose Nanofibers on the Behavior of Pickering Emulsions. Part 1. Microscopy and Startup Flow Test
  4. A dual-functional integrated Ni5P4/g-C3N4 S-scheme heterojunction for high performance synchronous photocatalytic hydrogen evolution and multi-contaminant removal with a waste-to-energy conversion
  5. Influence of Cellulose Nanofibers on the Behavior of Pickering Emulsions. Part 1. Microscopy and Startup Flow Test
  6. Visible-light driven dual heterojunction formed between g-C3N4/BiOCl@MXene-Ti3C2 for the effective degradation of tetracycline
  7. Mussel‐inspired biomaterials: From chemistry to clinic
  8. A Short History of Fusible Metals and Alloys – Towards Room Temperature Liquid Metals
  9. Carbon quantum dots embedded trimetallic oxide: Characterization and photocatalytic degradation of Ofloxacin
  10. Water-Soluble and -Insoluble Polymers and Biopolymers for Biomedical, Environmental, and Biological Applications
  11. Chitosan as a Tool for Sustainable Development: A Mini Review
  12. Gum Acacia-Crosslinked-Poly(Acrylamide) Hydrogel Supported C3N4/BiOI Heterostructure for Remediation of Noxious Crystal Violet Dye
  13. Activated Carbon as Superadsorbent and Sustainable Material for Diverse Applications
  14. Fabrication of a Z-scheme Zn3V2O8/g-C3N4 nano-heterojunction with high interfacial charge transfer for superior photocatalytic removal of diazinon pesticide under visible light
  15. A comprehensive review on the removal of noxious pollutants using carrageenan based advanced adsorbents
  16. Multiple interval thixotropic test (miTT)—an advanced tool for the rheological characterization of emulsions and other colloidal systems
  17. Cure Kinetics of Samarium-Doped Fe3O4/Epoxy Nanocomposites
  18. Chitosan-based inks for 3D printing and bioprinting
  19. A high polarity poly(vinylidene fluoride-co-trifluoroethylene) random copolymer with an all-trans conformation for solid-state LiNi0.8Co0.1Mn0.1O2/lithium metal batteries
  20. Accelerated charge transfer in well-designed S-scheme Fe@TiO2/Boron carbon nitride heterostructures for high performance tetracycline removal and selective photo-reduction of CO2 greenhouse gas into CH4 fuel
  21. Adsorption of cationic dyes onto carrageenan and itaconic acid-based superabsorbent hydrogel: Synthesis, characterization and isotherm analysis
  22. Fabrication and Characterization of Xanthan Gum-cl-poly(acrylamide-co-alginic acid) Hydrogel for Adsorption of Cadmium Ions from Aqueous Medium
  23. Cure Kinetics of Samarium-doped Fe3O4/Epoxy Nanocomposites
  24. Controlled synthesis of porous Zn/Fe based layered double hydroxides: Synthesis mechanism, and ciprofloxacin adsorption
  25. Fabrication and characterization of Ni/Ag/Zn trimetal oxide nanocomposites and its application in dopamine sensing
  26. Pharmaceutical pollutant as sacrificial agent for sustainable synergistic water treatment and hydrogen production via novel Z- scheme Bi7O9I3/B4C heterojunction photocatalysts
  27. Leitfähig und verformbar – Flüssigmetalle
  28. Human Organs‐on‐Chips: A Review of the State‐of‐the‐Art, Current Prospects, and Future Challenges
  29. Study the Effects of Supramolecular Interaction on Diffusion Kinetics in Hybrid Hydrogels of Zwitterionic Polymers and CNTs
  30. Metallic and bimetallic phosphides-based nanomaterials for photocatalytic hydrogen production and water detoxification: a review
  31. Concentration Effect over Thermoresponse Derived from Organometallic Compounds of Functionalized Poly(N-isopropylacrylamide-co-dopamine Methacrylamide)
  32. Acceleration of photo-reduction and oxidation capabilities of Bi4O5I2/SPION@calcium alginate by metallic Ag: Wide spectral removal of nitrate and azithromycin
  33. Hyaluronic acid-functionalized poly-lactic acid (PLA) microfibers regulate vascular endothelial cell proliferation and phenotypic shape expression
  34. HA-coated collagen nanofibers for urethral regeneration via in situ polarization of M2 macrophages
  35. Critical Review on the Physical Properties of Gallium-Based Liquid Metals and Selected Pathways for Their Alteration
  36. Hydrogen Bonds in Blends of Poly(N-isopropylacrylamide), Poly(N-ethylacrylamide) Homopolymers, and Carboxymethyl Cellulose
  37. Trimetallic@Cyclodextrin Nanocomposite: Photocatalyst for Degradation of Amoxicillin and Catalyst for Esterification Reactions
  38. High interfacial charge carrier separation in Fe3O4 modified SrTiO3/Bi4O5I2 robust magnetic nano-heterojunction for rapid photodegradation of diclofenac under simulated solar-light
  39. Lead adsorption onto Ni- and Pt-decorated nano γ-alumina: A first-principles study
  40. Adsorptional-photocatalytic removal of fast sulphon black dye by using chitin-cl-poly(itaconic acid-co-acrylamide)/zirconium tungstate nanocomposite hydrogel
  41. Response Curve Modeling of Chemiresistive Gas Sensors by Modified Gompertz Functions
  42. Surface Tension of the Oxide Skin of Gallium-Based Liquid Metals
  43. Effect of n ‐Alkyl Side Chain Length on the Thermal and Rheological Properties of Poly N ‐(3‐(alkylamino)‐ N ‐(3‐(isopropylamino)‐3‐oxopropyl)acrylamide) Homop...
  44. Synthesis, characterization and performance enhancement of dry polyaniline-coated neuroelectrodes for electroencephalography measurement
  45. Fracture behavior of SiGe nanosheets: Mechanics of monocrystalline vs. polycrystalline structure
  46. Utilization of Ag2O–Al2O3–ZrO2 decorated onto rGO as adsorbent for the removal of Congo red from aqueous solution
  47. Rheology of Conjugated Polymers with Bulky and Flexible Side Chains
  48. Construction of dual Z-scheme g-C3N4/Bi4Ti3O12/Bi4O5I2 heterojunction for visible and solar powered coupled photocatalytic antibiotic degradation and hydrogen production: Boosting via I−/I3− and Bi3+/Bi5+ redox mediators
  49. Toward Olefin Multiblock Copolymers with Tailored Properties: A Molecular Perspective
  50. Atomic simulation of adsorption of SO2 pollutant by metal (Zn, Be)-oxide and Ni-decorated graphene: a first-principles study
  51. Biomimetic electrospun tubular PLLA/gelatin nanofiber scaffold promoting regeneration of sciatic nerve transection in SD rat
  52. Preparation, thermoresponsive behavior, and preliminary biological study of functionalized poly(N-isopropylacrylamide-co-dopamine methacrylamide) copolymers with an organotin(IV) compound
  53. Rheological Behavior of Blends of Metallocene Catalyzed Long-Chain Branched Polyethylenes. Part I: Shear Rheological and Thermorheological Behavior
  54. Rheological Behavior of Blends of Metallocene Catalyzed Long-Chain Branched Polyethylenes. Part I: Shear Rheological and Thermorheological Behavior
  55. Interfacial jamming reinforced Pickering emulgel for arbitrary architected nanocomposite with connected nanomaterial matrix
  56. In-situ crosslinked hydrogel based on amidated pectin/oxidized chitosan as potential wound dressing for skin repairing
  57. A relaxor ferroelectric polymer with an ultrahigh dielectric constant largely promotes the dissociation of lithium salts to achieve high ionic conductivity
  58. Silicate glass matrix@Cu2O/Cu2V2O7 p-n heterojunction for enhanced visible light photo-degradation of sulfamethoxazole: High charge separation and interfacial transfer
  59. Rheological Behavior of Blends of Metallocene Catalyzed Long-Chain Branched Polyethylenes. Part I: Shear Rheological and Thermorheological Behavior
  60. Designing of bentonite based nanocomposite hydrogel for the adsorptive removal and controlled release of ampicillin
  61. Facile magnetoresistance adjustment of graphene foam for magnetic sensor applications through microstructure tailoring
  62. Fe3O4 mediated Z-scheme BiVO4/Cr2V4O13 strongly coupled nano-heterojunction for rapid degradation of fluoxetine under visible light
  63. Fe3O4/ZnO/Si3N4 nanocomposite based photocatalyst for the degradation of dyes from aqueous solution
  64. Mechanical load modulates the cargo of secreted extracellular vesicles (EVs) from living myocardial slices
  65. Fabrication of Highly Robust and Conductive Ion Gels Based on the Combined Strategies of Double-Network, Composite, and High-Functionality Cross-Linkers
  66. Agarose-based biomaterials for advanced drug delivery
  67. Ag0-Ag2O embedded nanocomposite hydrogel for adsorption-coupled-photocatalytic removal of triclosan
  68. CeO2/g-C3N4/V2O5 ternary nano hetero-structures decorated with CQDs for enhanced photo-reduction capabilities under different light sources: Dual Z-scheme mechanism
  69. Ag2O–Al2O3–ZrO2 Trimetallic Nanocatalyst for High Performance Photodegradation of Nicosulfuron Herbicide
  70. AgO/MgO/FeO@Si3N4 nanocomposite with robust adsorption capacity for tetracycline antibiotic removal from aqueous system
  71. A Comparative Study on Cure Kinetics of Layered Double Hydroxide (LDH)/Epoxy Nanocomposites
  72. Atrazine removal using chitin-cl-poly(acrylamide-co-itaconic acid) nanohydrogel: Isotherms and pH responsive nature
  73. Constructing Z-scheme LaTiO2N/g-C3N4@Fe3O4 magnetic nano heterojunctions with promoted charge separation for visible and solar removal of indomethacin
  74. LaTiO2N/Bi2S3 Z-scheme nano heterostructures modified by rGO with high interfacial contact for rapid photocatalytic degradation of tetracycline
  75. Synthesis and characterization of novel amphiphilic biocompatible block-copolymers of poly(N-isopropylacrylamide)-b-poly(l-phenylalanine methyl ester) by RAFT polymerization
  76. Gum Acacia‐ cl ‐poly(acrylamide)@carbon nitride Nanocomposite Hydrogel for Adsorption of Ciprofloxacin and its Sustained Release in Artificial Ocular Solution
  77. Integration of mesoporous ZnO and Au@ZnO nanospheres into sensing device for the ultrasensitive CH3COCH3 detection down to ppb levels
  78. Dye-sensitized solar cells based on natural photosensitizers: A green view from Iran
  79. Competition between Physical Cross‐Linking and Phase Transition Temperature in Blends Based on Poly( N ‐isopropylacrylamide‐co‐ N ‐ethylacrylamide) Copolymers and Carboxymethyl Cellulose
  80. Visibly Active FeO/ZnO@PANI Magnetic Nano-photocatalyst for the Degradation of 3-Aminophenol
  81. Metal–Organic Framework (MOF) through the Lens of Molecular Dynamics Simulation: Current Status and Future Perspective
  82. Graft Copolymerization of Acrylonitrile and Ethyl Acrylate onto Pinus Roxburghii Wood Surface Enhanced Physicochemical Properties and Antibacterial Activity
  83. Electrospun ferric ceria nanofibers blended with MWCNTs for high-performance electrochemical detection of uric acid
  84. Oxidized chitosan modified electrospun scaffolds for controllable release of acyclovir
  85. Surrounding Interactions on Phase Transition Temperature Promoted by Organometallic Complexes in Functionalized Poly( N ‐isopropylacrylamide‐ co ‐dopamine methacrylamide) Copolymers
  86. Functional Polymer Solutions and Gels—Physics and Novel Applications
  87. Facile fabrication of chitosan-cl-poly(AA)/ZrPO4 nanocomposite for remediation of rhodamine B and antimicrobial activity
  88. Carboxymethyl cellulose structured nano-adsorbent for removal of methyl violet from aqueous solution: isotherm and kinetic analyses
  89. Bio-inspired and biomaterials-based hybrid photocatalysts for environmental detoxification: A review
  90. Carbon quantum dots and reduced graphene oxide modified self-assembled S@C3N4/B@C3N4 metal-free nano-photocatalyst for high performance degradation of chloramphenicol
  91. Room temperature solid-state synthesis of mesoporous BiOI nanoflakes for the application of chemiresistive gas sensors
  92. Topological Effect on Effective Local Concentration and Dynamics in Linear/Linear, Ring/Ring, and Linear/Ring Miscible Polymer Blends
  93. Consistent red luminescence in π-conjugated polymers with tuneable elastic moduli over five orders of magnitude
  94. Design of flower-like V2O5 hierarchical nanostructures by hydrothermal strategy for the selective and sensitive detection of xylene
  95. Designing a multifaceted bio-interface nanofiber tissue-engineered tubular scaffold graft to promote neo-vascularization for urethral regeneration
  96. Urethral reconstruction using an amphiphilic tissue-engineered autologous polyurethane nanofiber scaffold with rapid vascularization function
  97. C2H5OH sensing properties of solid-state mediated BiOBr nanoplates
  98. Curing epoxy with electrochemically synthesized Co Fe3-O4 magnetic nanoparticles
  99. Honeycomb structured activated carbon synthesized from Pinus roxburghii cone as effective bioadsorbent for toxic malachite green dye
  100. Ethanol sensing behavior of Pd-nanoparticles decorated ZnO-nanorod based chemiresistive gas sensors
  101. Curing epoxy with electrochemically synthesized Mn Fe3-O4 magnetic nanoparticles
  102. Graphene oxide supported La/Co/Ni trimetallic nano-scale systems for photocatalytic remediation of 2-chlorophenol
  103. Tunable sign of magnetoresistance in graphene foam – Ecoflex® composite for wearable magnetoelectronic devices
  104. Lower critical solution temperature sensitivity to structural changes in poly( N ‐isopropyl acrylamide) homopolymers
  105. Linear and Nonlinear Dynamic Behavior of Polymer Micellar Assemblies Connected by Metallo-Supramolecular Interactions
  106. Effect of Cross‐Linker in Poly( N ‐Isopropyl Acrylamide)‐Grafted‐Gelatin Gels Prepared by Microwave‐Assisted Synthesis
  107. Recent advances in nano-Fenton catalytic degradation of emerging pharmaceutical contaminants
  108. Highly efficient Sr/Ce/activated carbon bimetallic nanocomposite for photoinduced degradation of rhodamine B
  109. Facile Fabrication of Hierarchical rGO/PANI@PtNi Nanocomposite via Microwave-Assisted Treatment for Non-Enzymatic Detection of Hydrogen Peroxide
  110. Highly visible active Ag2CrO4/Ag/BiFeO3@RGO nano-junction for photoreduction of CO2 and photocatalytic removal of ciprofloxacin and bromate ions: The triggering effect of Ag and RGO
  111. Viscoelastic Conjugated Polymer Fluids
  112. Curing epoxy with electrochemically synthesized Ni Fe3-O4 magnetic nanoparticles
  113. Fe/La/Zn nanocomposite with graphene oxide for photodegradation of phenylhydrazine
  114. Effect of Hydrophobic Interactions on Lower Critical Solution Temperature for Poly(N-isopropylacrylamide-co-dopamine Methacrylamide) Copolymers
  115. Hybrid polyaniline-WO3 flexible sensor: A room temperature competence towards NH3 gas
  116. Lower Critical Solution Temperature in Poly( N ‐Isopropylacrylamide): Comparison of Detection Methods and Molar Mass Distribution Influence
  117. Viskoelastische konjugierte polymere Fluide
  118. Rheology of Concentrated Polymer/Ionic Liquid Solutions: An Anomalous Plasticizing Effect and a Universality in Nonlinear Shear Rheology
  119. Rheological Study on the Thermoreversible Gelation of Stereo-Controlled Poly(N-Isopropylacrylamide) in an Imidazolium Ionic Liquid
  120. Small and large amplitude oscillatory shear behavior of supramolecular gels based on dopamine-boronic acid interactions
  121. Highly Efficient Polydopamine-coated Poly(methyl methacrylate) Nanofiber Supported Platinum–nickel Bimetallic Catalyst for Formaldehyde Oxidation at Room Temperature
  122. A new quinoline-derived highly-sensitive fluorescent probe for the detection of hydrazine with excellent large-emission-shift ratiometric response
  123. Intelligent Machine Learning: Tailor-Making Macromolecules
  124. Room temperature ammonia gas sensing properties of polyaniline nanofibers
  125. Defect-induced, temperature-independent, tunable magnetoresistance of partially fluorinated graphene foam
  126. Solid-state synthesis strategy of hierarchically-structured BiOCl desert-roses for the selective detection of C2H5OH
  127. Fabrication and characterization of novel Fe0@Guar gum-crosslinked-soya lecithin nanocomposite hydrogel for photocatalytic degradation of methyl violet dye
  128. Fabrication of oxidized graphite supported La2O3/ZrO2 nanocomposite for the photoremediation of toxic fast green dye
  129. Preparation and Characterization of Gum Acacia/Ce(IV)MoPO4 Nanocomposite Ion Exchanger for Photocatalytic Degradation of Methyl Violet Dye
  130. Wide spectral degradation of Norfloxacin by Ag@BiPO4/BiOBr/BiFeO3 nano-assembly: Elucidating the photocatalytic mechanism under different light sources
  131. Algal biochar reinforced trimetallic nanocomposite as adsorptional/photocatalyst for remediation of malachite green from aqueous medium
  132. Enhanced NO2 sensing aptness of ZnO nanowire/CuO nanoparticle heterostructure-based gas sensors
  133. Processing temperature dependent chemiresistive performance of spin-coated cerium oxide films
  134. Visible photodegradation of ibuprofen and 2,4-D in simulated waste water using sustainable metal free-hybrids based on carbon nitride and biochar
  135. Rheology–Microstructure Relationships in Melt-Processed Polylactide/Poly(vinylidene Fluoride) Blends
  136. Fabrication and characterization of Gum arabic-cl-poly(acrylamide) nanohydrogel for effective adsorption of crystal violet dye
  137. Facile fabrication of Zr2Ni1Cu7 trimetallic nano-alloy and its composite with Si3N4 for visible light assisted photodegradation of methylene blue
  138. Ultra-Sensitive C2H5OH Sensing Properties of Template-Free Solvothermal-Processed Hierarchical ZnO Nanospheres
  139. High-Performance Photocatalytic Hydrogen Production and Degradation of Levofloxacin by Wide Spectrum-Responsive Ag/Fe3O4 Bridged SrTiO3/g-C3N4 Plasmonic Nanojunctions: Joint Effect of Ag and Fe3O4
  140. Study of the Interactions of Zwitterions and Carbon Nanotubes by Nonlinear Rheology in an Aqueous Environment
  141. Effect of a functional polymer on the rheology and microstructure of sodium alginate
  142. Guar gum and its composites as potential materials for diverse applications: A review
  143. Biomechanical Heterogeneity of Living Cells: Comparison between Atomic Force Microscopy and Finite Element Simulation
  144. Carbon nitride, metal nitrides, phosphides, chalcogenides, perovskites and carbides nanophotocatalysts for environmental applications
  145. Tacticity effect on the upper critical solution temperature behavior of Poly(N-isopropylacrylamide) in an imidazolium ionic liquid
  146. Utilizing recycled LiFePO4 from batteries in combination with B@C3N4 and CuFe2O4 as sustainable nano-junctions for high performance degradation of atenolol
  147. Large unsaturated room temperature negative magnetoresistance in graphene foam composite for wearable and flexible magnetoelectronics
  148. Atomic force microscopy methodology and AFMech Suite software for nanomechanics on heterogeneous soft materials
  149. Development and characterizations of novel aqueous-based LSCF suspensions for inkjet printing
  150. Quinoline-derived fluorescent probes for the discrimination of Cys from Hcys/GSH and bioimaging in living cells
  151. Guar gum- crosslinked -Soya lecithin nanohydrogel sheets as effective adsorbent for the removal of thiophanate methyl fungicide
  152. Fabrication and characterization of trimetallic nano-photocatalyst for remediation of ampicillin antibiotic
  153. Specific capacitance, energy and power density coherence in electrochemically synthesized polyaniline-nickel oxide hybrid electrode
  154. Erratum: “Effect of tacticity and molecular weight on the rheological properties of poly(N-isopropylacrylamide) gels in benzyl alcohol” [J. Rheol. 61, 1345–1357 (2017)]
  155. Biochar-templated g-C3N4/Bi2O2CO3/CoFe2O4 nano-assembly for visible and solar assisted photo-degradation of paraquat, nitrophenol reduction and CO2 conversion
  156. Impact of heavy metals and nanoparticles on aquatic biota
  157. Large amplitude oscillatory shear behavior of graphene derivative/polydimethylsiloxane nanocomposites
  158. Classification of thermorheological complexity for linear and branched polyolefins
  159. Aerogels and metal–organic frameworks for environmental remediation and energy production
  160. Enhanced DSSCs performance of TiO 2 nanostructure by surface passivation layers
  161. Sodium Dodecyl Sulphate-Supported Nanocomposite as Drug Carrier System for Controlled Delivery of Ondansetron
  162. Intelligent Monte Carlo: A New Paradigm for Inverse Polymerization Engineering
  163. Enhanced acetone sensing properties of titanium dioxide nanoparticles with a sub-ppm detection limit
  164. Low-temperature wet chemical synthesis strategy of In 2 O 3 for selective detection of NO 2 down to ppb levels
  165. Quaternary magnetic BiOCl/g-C 3 N 4 /Cu 2 O/Fe 3 O 4 nano-junction for visible light and solar powered degradation of sulfamethoxazole from aqueous environment
  166. Investigation of micromechanical properties of hard sphere filled composite hydrogels by atomic force microscopy and finite element simulations
  167. Looking back to interfacial tension prediction in the compatibilized polymer blends: Discrepancies between theories and experiments
  168. Efficient removal of toxic phosphate anions from aqueous environment using pectin based quaternary amino anion exchanger
  169. Photoremediation of toxic dye from aqueous environment using monometallic and bimetallic quantum dots based nanocomposites
  170. A novel approach to analyze the rheological properties of hydrogels with network structure simulation
  171. Ethanol gas sensing properties of hydrothermally grown α -MnO 2 nanorods
  172. A simple wet-chemical synthesis, reaction mechanism, and charge storage application of cobalt oxide electrodes of different morphologies
  173. Effect of tacticity and molecular weight on the rheological properties of poly(N-isopropylacrylamide) gels in benzyl alcohol
  174. Zinc oxide hierarchical nanostructures as potential NO 2 sensors
  175. Sustainable nano-hybrids of magnetic biochar supported g-C 3 N 4 /FeVO 4 for solar powered degradation of noxious pollutants- Synergism of adsorption, photocatalysis & photo-ozonation
  176. ZnSe-WO 3 nano-hetero-assembly stacked on Gum ghatti for photo-degradative removal of Bisphenol A: Symbiose of adsorption and photocatalysis
  177. Applications of nanocomposite hydrogels for biomedical engineering and environmental protection
  178. Crosslinking hydroxylated reduced graphene oxide with RAFT-CTA: A nano-initiator for preparation of well-defined amino acid-based polymer nanohybrids
  179. Microwave assisted fabrication of La/Cu/Zr/carbon dots trimetallic nanocomposites with their adsorptional vs photocatalytic efficiency for remediation of persistent organic pollutants
  180. Mussel-inspired 3D networks with stiff-irreversible or soft-reversible characteristics - It's all a matter of solvent
  181. Testing of the effect of parameters on the cononsolvency of random copolymer gels of N -isopropylacrylamide and N -ethylacrylamide in methanol-water mixed solvents by simple gravimetric method
  182. Irreconcilable room temperature magnetotransport properties of polypyrrole nanoparticles and nanorods
  183. Incidence, treatment strategies and outcomes of acute coronary syndrome with and without ongoing myocardial ischaemia: results from the CZECH-3 registry
  184. Efficient removal of coomassie brilliant blue R-250 dye using starch/poly(alginic acid- cl -acrylamide) nanohydrogel
  185. Rapid synthesis strategy of CuO nanocubes for sensitive and selective detection of NO 2
  186. Solution-processed rapid synthesis strategy of Co 3 O 4 for the sensitive and selective detection of H 2 S
  187. Thermally evaporated copper oxide films: A view of annealing effect on physical and gas sensing properties
  188. Sorption and desorption properties of random copolymer hydrogels of N -isopropylacrylamide and N -ethylacrylamide: Effect of monomer composition
  189. Nanostructured tin oxide films: Physical synthesis, characterization, and gas sensing properties
  190. Facile fabrication of polyurethane microcapsules carriers for tracing cellular internalization and intracellular pH-triggered drug release
  191. Unspoken aspects of chain shuttling reactions: Patterning the molecular landscape of olefin multi-block copolymers
  192. Low-temperature chemical synthesis of rutile and anatase mixed phase TiO 2 nanostructures for DSSCs photoanodes
  193. Galvanostatically electroplated MnO2 nanoplate-type electrode for potential electrochemical pseudocapacitor application
  194. Reduced graphene oxide composites with water soluble copolymers having tailored lower critical solution temperatures and unique tube-like structure
  195. Synthesis of scalable and tunable slightly oxidized graphene via chemical vapor deposition
  196. Complex interplay of short- and long-chain branching on thermal and rheological properties of ethylene/α-olefin copolymers made by metallocene catalysts with oscillating ligand structure
  197. Flexible camphor sulfonic acid-doped PAni/α-Fe 2 O 3 nanocomposite films and their room temperature ammonia sensing activity
  198. Versatile Mechanical and Thermoresponsive Properties of Macroporous Copolymer Gels
  199. Electrochemical synthesis and potential electrochemical energy storage performance of nodule-type polyaniline
  200. Non-magnetic thin films for magnetic field position sensor
  201. Solution-processed nickel oxide films and their liquefied petroleum gas sensing activity
  202. A novel protocol to design TiO2-Fe2O3 hybrids with effective charge separation efficiency for improved photocatalysis
  203. Large, Linear, and Tunable Positive Magnetoresistance of Mechanically Stable Graphene Foam–Toward High-Performance Magnetic Field Sensors
  204. Solid-state synthesis strategy of ZnO nanoparticles for the rapid detection of hazardous Cl2
  205. Controlled growth of polythiophene nanofibers in TiO2 nanotube arrays for supercapacitor applications
  206. Random copolymer gels of N-isopropylacrylamide and N-ethylacrylamide: effect of synthesis solvent compositions on their properties
  207. Graphene oxide-based silsesquioxane-crosslinked networks – synthesis and rheological behavior
  208. Solar-driven photodegradation of 17-β-estradiol and ciprofloxacin from waste water and CO2 conversion using sustainable coal-char/polymeric-g-C3N4/RGO metal-free nano-hybrids
  209. Smart multifunctional polyurethane microcapsules for the quick release of anticancer drugs in BGC 823 and HeLa tumor cells
  210. Space-resolved quantitative mechanical measurements of soft and supersoft materials by atomic force microscopy
  211. High Capacity Retention Anode Material for Lithium Ion Battery
  212. Enhanced adsorption and photocatalysis capability of generally synthesized TiO2-carbon materials hybrids
  213. Synthesis, characterization, and drug release properties of macroporous dual stimuli responsive stereo regular nanocomposites gels of poly(N-isopropylacrylamide) and graphene oxide
  214. Hydrogen Bonding in a Reversible Comb Polymer Architecture: A Microscopic and Macroscopic Investigation
  215. Deriving comprehensive structural information on long-chain branched polyethylenes from analysis of thermo-rheological complexity
  216. Kinin B1 receptor blockade and ACE inhibition attenuate cardiac postinfarction remodeling and heart failure in rats
  217. Dense bottlebrushes enable supersoft solvent-free networks
  218. Hexamethylenetetramine-mediated TiO2 films: Facile chemical synthesis strategy and their use in nitrogen dioxide detection
  219. Durable Antibacterial and Nonfouling Cotton Textiles with Enhanced Comfort via Zwitterionic Sulfopropylbetaine Coating
  220. Effect of H2O and reduced graphene oxide on the structure and rheology of self-healing, stimuli responsive catecholic gels
  221. Nanoprecursor-Mediated Synthesis of Mg2+-Doped TiO2 Nanoparticles and Their Application for Dye-Sensitized Solar Cells
  222. Preparation of camphor-sulfonic acid doped PPy–NiO hybrid nanocomposite for detection of toxic nitrogen dioxide
  223. A unified picture of hard-soft segmental development along olefin chain shuttling copolymerization
  224. A Perspective on Modeling and Characterization of Transformations in the Blocky Nature of Olefin Block Copolymers
  225. A Monte Carlo-based feeding policy for tailoring microstructure of copolymer chains: Reconsidering the conventional metallocene catalyzed polymerization of α-olefins
  226. On “modulus shift” and thermorheological complexity in polyolefins
  227. Anomalous Rheological Behavior of Dendritic Nanoparticle/Linear Polymer Nanocomposites
  228. Mussel-Inspired Electrospun Smart Magnetic Nanofibers for Hyperthermic Chemotherapy
  229. Self-associations and temperature dependence of aqueous solutions of zwitterionically modified N-isopropylacrylamide copolymers
  230. Hydrogen Bonding in Aprotic Solvents, a New Strategy for Gelation of Bioinspired Catecholic Copolymers with N -Isopropylamide
  231. Development of zwitterionic polyurethanes with multi-shape memory effects and self-healing properties
  232. Oscillations in modulus in solutions of graphene oxide and reduced graphene oxide with grafted poly-N-isopropylamide
  233. Achieving phase transformation and structure control of crystalline anatase TiO2@C hybrids from titanium glycolate precursor and glucose molecules
  234. Electrochemical supercapacitor development based on electrodeposited nickel oxide film
  235. A facile and general synthesis strategy to doped TiO2 nanoaggregates with a mesoporous structure and comparable property
  236. Development of zwitterionic copolymers with multi-shape memory effects and moisture-sensitive shape memory effects
  237. Ultra-sensitive polyaniline–iron oxide nanocomposite room temperature flexible ammonia sensor
  238. Simple and low-temperature polyaniline-based flexible ammonia sensor: a step towards laboratory synthesis to economical device design
  239. Correction to Supramolecular Interaction Controlled Diffusion Mechanism and Improved Mechanical Behavior of Hybrid Hydrogel Systems of Zwitterions and CNT
  240. A NIPAM-Zwitterion Copolymer: Rheological Interpretation of the Specific Ion Effect on the LCST
  241. Graphene Oxide/Carbon Nanotube Composite Hydrogels-Versatile Materials for Microbial Fuel Cell Applications
  242. What are typical sources of error in rotational rheometry of polymer melts?
  243. A Detailed Model on Kinetics and Microstructure Evolution during Copolymerization of Ethylene and 1-Octene: From Coordinative Chain Transfer to Chain Shuttling Polymerization
  244. A NIPAM-Zwitterion Copolymer: Rheological Interpretation of the Specific Ion Effect on the LCST
  245. Microfluidic-Assisted Self-Assembly of Complex Dendritic Polyethylene Drug Delivery Nanocapsules
  246. Refluxing Synthesis of Anatase TiO2 Nanoparticles Assembled Microprisms and Its Application for Dye-Sensitized Solar Cells
  247. Rapid self-healing and triple stimuli responsiveness of a supramolecular polymer gel based on boron–catechol interactions in a novel water-soluble mussel-inspired copolymer
  248. Network formation in graphene oxide composites with surface grafted PNIPAM chains in aqueous solution characterized by rheological experiments
  249. Facile synthesis and characterization of TiO2 nanodots and TiO2 nanodots@MWCNTs composite via solvothermal method
  250. Structure modification of anatase TiO2 nanomaterials-based photoanodes for efficient dye-sensitized solar cells
  251. A facile polyol-mediated approach to tunable CeO2 microcrystals and their photocatalytic activity
  252. Assessment of end-group functionality in atom transfer radical polymerization of N-isopropylacrylamide
  253. Novel Preparation of Anatase TiO 2 @Reduced Graphene Oxide Hybrids for High-Performance Dye-Sensitized Solar Cells
  254. Shear Induced Irreversible Gelation through Physical Network Formation
  255. Quantifying primary loops in polymer gels by linear viscoelasticity
  256. Elongational rheology of NIPAM-based hydrogels
  257. Evaluation of relaxation spectra of linear, short, and long-chain branched polyethylenes
  258. Influence of Multiwall Carbon Nanotubes Trapped at the Interface of an Immiscible Polymer Blend on Interfacial Tension
  259. Mussel-inspired pH-triggered reversible foamed multi-responsive gel – the surprising effect of water
  260. Facile template-free and fast refluxing synthesis of 3D desertrose-like BiOCl nanoarchitectures with superior photocatalytic activity
  261. High efficiency solid state dye sensitized solar cells with graphene–polyethylene oxide composite electrolytes
  262. Revisiting the long-chain branch formation mechanism in metallocene catalyzed polyethylenes
  263. Supramolecular Interaction Controlled Diffusion Mechanism and Improved Mechanical Behavior of Hybrid Hydrogel Systems of Zwitterions and CNT
  264. On the usefulness of rheological spectra—a critical discussion
  265. Rheological properties of electron beam-irradiated polypropylenes with different molar masses
  266. Using relaxation spectra to understand molecular processes in ring polymers
  267. On-line observation of hydrogels during swelling and LCST-induced changes
  268. Detecting very low levels of long-chain branching in metallocene-catalyzed polyethylenes
  269. Comparison of Molecular Structure and Rheological Properties of Electron-Beam- and Gamma-Irradiated Polypropylene
  270. Understanding the effect of short-chain branches by analyzing viscosity functions of linear and short-chain branched polyethylenes
  271. Dynamic-mechanical behavior of polyethylenes and ethene-/α-olefin-copolymers: Part III. γ-relaxation
  272. Correlations between the Characteristic Rheological Quantities and Molecular Structure of Long-Chain Branched Metallocene Catalyzed Polyethylenes
  273. Characterization of branched ultrahigh molar mass polymers by asymmetrical flow field-flow fractionation and size exclusion chromatography
  274. Synthesis and Characterization of Novel Ethylene- graft -Ethylene/Propylene Copolymers
  275. Happy birthday, Helmut Münstedt
  276. Thermorheological behavior of polyethylene: a sensitive probe to molecular structure
  277. Rheological characterization in shear of a model dumbbell polymer concentrated solution
  278. Crystal structure of ethene-/α-olefin copolymers with various long comonomers (C8–C26)
  279. Copolymer Hydrogels of Acrylic Acid and a Nonionic Surfmer: pH-Induced Switching of Transparency and Volume and Improved Mechanical Stability
  280. Dynamic-mechanical behavior of polyethylenes and ethene/α-olefin-copolymers: Part II. α- and β-relaxation
  281. Evidence of intra-chain phase separation in molten short-chain branched polyethylene
  282. Improvement of elasticity and strength of poly(N-isopropylacrylamide) hydrogels upon copolymerization with cationic surfmers
  283. Thermoresponsive Copolymer Hydrogels on the Basis of N -Isopropylacrylamide and a Non-Ionic Surfactant Monomer: Swelling Behavior, Transparency and Rheological Properties
  284. Atom Transfer Radical Polymerization of Isobornyl Acrylate: A Kinetic Modeling Study
  285. An Improved Method To Obtain Direct Rheological Evidence of Monomer Density Reequilibration for Entangled Polymer Melts
  286. Separation of short-chain branched polyolefins by high-temperature gradient adsorption liquid chromatography
  287. Elongational Rheology and Brillouin Light Scattering of Entangled Telechelic Polybutadiene Based Temporary Networks
  288. Thermorheological Behavior of Various Short- and Long-Chain Branched Polyethylenes and Their Correlations with the Molecular Structure
  289. Effect of incomplete datasets on the calculation of continuous relaxation spectra from dynamic-mechanical data
  290. Long-Chain Branches in Syndiotactic Polypropene Induced by Vinyl Chloride
  291. Method for obtaining tube model parameters for commercial ethene/α-olefin copolymers
  292. Crystallite dimensions - characterization of ethene-/ɑ-olefin Copolymers with various comonomers and comonomer Ccontents measured by small- and wide angle X-ray scattering
  293. Lattice sizes, crystallinities, and spacing between amorphous chains - characterization of ethene-/ɑ-olefin copolymers with various comonomers and comonomer contents measured by wide angle X-ray scattering
  294. Linear Viscoelastic Rheology of Moderately Entangled Telechelic Polybutadiene Temporary Networks
  295. Temperature Dependence of the Linear Steady-State Shear Compliance of Linear and Long-Chain Branched Polyethylenes
  296. Dye-Adsorption-Induced Gelation of Suspensions of Spherical and Rodlike Zinc Oxide Nanoparticles in Organic Solvents †
  297. Avoiding waviness of relaxation spectra
  298. Correlations between the Shape of Viscosity Functions and the Molecular Structure of Long-Chain Branched Polyethylenes
  299. Connecting micelles by metallo-supramolecular interactions: towards stimuli responsive hierarchical materials
  300. Influence of molar mass distribution and long-chain branching on strain hardening of low density polyethylene
  301. A new method for the calculation of continuous relaxation spectra from dynamic-mechanical data
  302. Erratum to “Numerical description of shear viscosity functions of long-chain branched metallocene-catalyzed polyethylenes” [J. Non-Newton. Fluid Mech. 151 (2008) 129–135]
  303. Numerical description of shear viscosity functions of long-chain branched metallocene-catalyzed polyethylenes
  304. Influence of the Molecular Structure of Polyolefins on the Damping Function in Shear
  305. Thermorheological Behavior of Various Long-Chain Branched Polyethylenes
  306. Terminal viscous and elastic properties of linear ethene∕α-olefin copolymers
  307. Temperature Dependence of the Elastic Compliance of Polyethylenes with Different Molecular Structure
  308. Linear and Nonlinear Rheological Characterization of Temporary Networks of Telechelic Polybutadiene
  309. Elastic and Viscous Properties of Linear and Long-Chain Branched Ethene∕α-Olefin Copolymers in the Terminal Regime
  310. Influence of Short-Chain Branching of Polyethylenes on the Temperature Dependence of Rheological Properties in Shear
  311. Synthesis and Characterization of Novel Ethene-graft-Ethene/Propene Copolymers
  312. Comparison of the elongational behavior of various polyolefins in uniaxial and equibiaxial flows
  313. Rheological Characterization of Long-chain Branched Polyethylenes and Comparison with Classical Analytical Methods
  314. Influence of Type and Content of Various Comonomers on Long-Chain Branching of Ethene/α-Olefin Copolymers
  315. Structure-Property Relationships of Linear and Long-Chain Branched Metallocene High-Density Polyethylenes Characterized by Shear Rheology and SEC-MALLS
  316. Dependence of the zero shear-rate viscosity and the viscosity function of linear high-density polyethylenes on the mass-average molar mass and polydispersity
  317. Dynamic-mechanical behavior of polyethylenes and ethene-/α-olefin-copolymers. Part I. α′-Relaxation