All Stories

  1. Implantable Systems for Stress Urinary Incontinence
  2. A new multiple watermarking scheme for copyright protection and image authentication
  3. Design and Evaluation of a Novel Subatmospheric Pressure Bioreactor for the Preconditioning of Tissue-Engineered Vascular Constructs
  4. Comparing the endothelialisation of extracellular matrix bioscaffolds with coated synthetic vascular graft materials
  5. On the Automatic Decellularisation of Porcine Aortae: A Repeatability Study Using a Non-Enzymatic Approach
  6. In vitro evaluation of acellular porcine urinary bladder extracellular matrix – A potential scaffold in tissue engineered skin
  7. Automatic Decellularization of Ovine Aorta-Derived Extracellular Matrix Offers Reduced Processing and Attendee Times While Being as Effective as Manual Techniques
  8. A Novel Multiple Watermarking Algorithm for Patient Identification and Integrity Control
  9. Determining the influence of calcification on the failure properties of abdominal aortic aneurysm (AAA) tissue
  10. The Biaxial Biomechanical Behavior of Abdominal Aortic Aneurysm Tissue
  11. The impact of long term freezing on the mechanical properties of porcine aortic tissue
  12. Human balance responses to perturbations in the horizontal plane
  13. The effects of stent interaction on porcine urinary bladder matrix employed as stent-graft materials
  14. The biaxial mechanical behaviour of abdominal aortic aneurysm intraluminal thrombus: Classification of morphology and the determination of layer and region specific properties
  15. Regions of High Wall Stress Can Predict the Future Location of Rupture of Abdominal Aortic Aneurysm
  16. From Detection to Rupture: A Serial Computational Fluid Dynamics Case Study of a Rapidly Expanding, Patient-Specific, Ruptured Abdominal Aortic Aneurysm
  17. Correlation of Hemodynamic Parameters to Endothelial Cell Proliferation in an End to Side Anastomosis
  18. A Review of Methods for Determining the Long Term Behavior of Endovascular Devices
  19. Development of a rotational cell‐seeding system for tubularized extracellular matrix (ECM) scaffolds in vascular surgery
  20. On the potential of hydrated storage for naturally derived ECMs and associated effects on mechanical and cellular performance
  21. Comparison of methods used to measure the thickness of soft tissues and their influence on the evaluation of tensile stress
  22. Evaluation of xenogenic extracellular matrices as adjuvant scaffolds for the treatment of stress urinary incontinence
  23. Innovative Design and Manufacturing Techniques for Patient Specific Abdominal Aortic Aneurysm Flexible Benchtop Models
  24. Evaluation of a novel vascular graft with a distal bifurcation designed to reduce the development of intimal hyperplasia. experimental study in a porcine aorta model
  25. Influence of implant design on the method of failure for three implants designed for use in the treatment of intertrochanteric fractures: the dynamic hip screw (DHS), DHS blade and X-BOLT
  26. Stent graft performance in the treatment of abdominal aortic aneurysms: The influence of compliance and geometry
  27. Cell-seeded extracellular matrices for bladder 
reconstruction: An ex vivo comparative study 
of their biomechanical properties
  28. Hemodynamic variations due to spiral blood flow through four patient‐specific bifurcated stent graft configurations for the treatment of abdominal aortic aneurysms
  29. Mechanical characterisation of unidirectional and cross-directional multilayered urinary bladder matrix (UBM) scaffolds
  30. Finite element and photoelastic modelling of an abdominal aortic aneurysm: a comparative study
  31. Optimizing the fat and water content of impaction bone allograft
  32. Use of Regional Mechanical Properties of Abdominal Aortic Aneurysms to Advance Finite Element Modeling of Rupture Risk
  33. The Hemodynamic Influence due to the Inclusion of the Full Aorta on a Patient Specific Stent Graft (SG) Device
  34. Review of “Biomechanics and Mechanobiology of Aneurysms”
  35. Validity of synthetic bone as a substitutefor osteoporotic cadaveric femoral heads in mechanical testing: A biomechanical study
  36. Use of Regional Mechanical Properties of Abdominal Aortic Aneurysms to Advance Finite Element Modeling of Rupture Risk
  37. Spherical indentation of free-standing acellular extracellular matrix membranes
  38. The X-Bolt: A Biomechanical Study with this New Design Variation of the Dynamic Hip Screw (DHS)
  39. Construction and Evaluation of Urinary Bladder Bioreactor for Urologic Tissue-engineering Purposes
  40. Use of the Photoelastic Method to Determine the Wall Stress in Realistic Abdominal Aortic Aneurysm Models
  41. Augmentation Cystoplasty and Extracellular Matrix Scaffolds: An Ex Vivo Comparative Study with Autogenous Detubularised Ileum
  42. Dynamic hip screw versus DHS blade: A BIOMECHANICAL COMPARISON OF THE FIXATION ACHIEVED BY EACH IMPLANT IN BONE
  43. 19 EVALUATION OF VIABILITY AND PROLIFERATIVE ACTIVITY OF HUMAN UROTHELIAL CELLS CULTURED ONTO XENOGENIC TISSUE-ENGINEERED EXTRACELLULAR MATRICES
  44. Evaluation of Viability and Proliferative Activity of Human Urothelial Cells Cultured Onto Xenogenic Tissue-Engineered Extracellular Matrices
  45. COMMENTARY: Computational Rupture Prediction of AAAs: What Needs to Be Done Next?
  46. Porcine extracellular matrix scaffolds in reconstructive urology: An ex vivo comparative study of their biomechanical properties
  47. In vivo feasibility case study for evaluating abdominal aortic aneurysm tissue properties and rupture potential using acoustic radiation force impulse imaging
  48. 658 PORCINE EXTRACELLULAR MATRIX SCAFFOLDS IN RECONSTRUCTIVE UROLOGY: A COMPARATIVE STUDY OF THEIR BIOMECHANICAL PROPERTIES
  49. In vitro measurement of the axial migration force on the proximal end of a bifurcated abdominal aortic aneurysm stent-graft model
  50. Biomechanics and Mechanobiology of Aneurysms
  51. Experimental Analysis of Endovascular Treatment of AAA and Predictors of Long Term Outcomes
  52. Fluid–Structure Interaction in Healthy, Diseased and Endovascularly Treated Abdominal Aortic Aneurysms
  53. Computer-Aided Diagnosis of Abdominal Aortic Aneurysms
  54. Wall Shear Stresses Remain Elevated in Mature Arteriovenous Fistulas: A Case Study
  55. The effect of vessel material properties and pulsatile wall motion on the fixation of a proximal stent of an endovascular graft
  56. Xenogenic Extracellular Matrices as Potential Biomaterials for Interposition Grafting in Urological Surgery
  57. New Approaches to Abdominal Aortic Aneurysm Rupture Risk Assessment
  58. A Computational Study of the Magnitude and Direction of Migration Forces in Patient-specific Abdominal Aortic Aneurysm Stent-Grafts
  59. A Computational Study of the Magnitude and Direction of Migration Forces in Patient-specific Abdominal Aortic Aneurysm Stent-Grafts
  60. Experimental validation of convection-diffusion discretisation scheme employed for computational modelling of biological mass transport
  61. The Relationship Between Wall Stress and 3D Asymmetry in Repaired and Ruptured Abdominal Aortic Aneurysms
  62. Improvements in Rupture Prediction of Abdominal Aortic Aneurysms Using Local Mechanical Property Estimation Obtained From ECG-Gated Computed Tomography
  63. Experimental Measurement of the Migration Force at the Proximal End of an Aortic Endograft
  64. Acoustic Radiation Force Impulse Imaging on ex vivo Abdominal Aortic Aneurysm Model
  65. Identification of rupture locations in patient-specific abdominal aortic aneurysms using experimental and computational techniques
  66. Factors that affect mass transport from drug eluting stents into the artery wall
  67. An Improved Methodology for Investigating the Parameters Influencing Migration Resistance of Abdominal Aortic Stent-Grafts
  68. New Pulsatile Hydrostatic Pressure Bioreactor for Vascular Tissue‐engineered Constructs
  69. X-ray and microstructural investigation of NiTiPt alloys homogenised at intermediate to high temperatures
  70. Arterial Circulation and Disease Processes
  71. Determination of Coefficient of Friction for Self-Expanding Stent-Grafts
  72. Engineering Silicone Rubbers for In Vitro Studies: Creating AAA Models and ILT Analogues With Physiological Properties
  73. Storage Effects on the Mechanical and Cellular Performance of Naturally Derived Extracellular Matrix Materials
  74. A Finite Element Analysis Rupture Index (FEARI) Assessment of Electively Repaired and Symptomatic/Ruptured Abdominal Aortic Aneurysms
  75. Evaluating the Shear Resistance of Human Endothelial Cells under Physiological Conditions for 3D Substrate Materials
  76. Regenerative medicine, tissue engineering and vascular surgery: twenty first century clinical challenges
  77. Realistic Temporal Variations of Shear Stress Modulate MMP-2 and MCP-1 Expression in Arteriovenous Vascular Access
  78. ECM-Based Materials in Cardiovascular Applications: Inherent Healing Potential and Augmentation of Native Regenerative Processes
  79. Fluid-structure interaction of a patient-specific abdominal aortic aneurysm treated with an endovascular stent-graft
  80. Experimental modelling of aortic aneurysms: Novel applications of silicone rubbers
  81. Acoustic Radiation Force Impulse imaging for aneurysms
  82. A Finite Element Analysis Rupture Index (FEARI) as an Additional Tool for Abdominal Aortic Aneurysm Rupture Prediction
  83. Strength of Atherosclerotic Plaque in Carotid Artery
  84. Analysis of Post-Operative Abdominal Aortic Aneurysm Repair: A Multi Patient-Specific Study
  85. Experimental Validation of the Influence of Stent Strut Compression on Artery Wall Drug Mass Transport
  86. The Development of Physiological Compliant Abdominal Aortic Aneurysm Models for In Vitro Flow Studies
  87. The Effects on the Strength of UBM Extracellular Matrix Under Stent Loading: An Experimental and Numerical Study
  88. Deformations During and Post Stenting of a Diseased Coronary Artery Phantom: An In Vitro Study
  89. Generation of Realistic Physical Models of Cerebral Aneurysms for In Vitro Flow Visualisation
  90. Design and Development of Silicone Rubbers for Use in the Experimental Modelling of Abdominal Aortic Aneurysms
  91. An Experimental and Numerical Comparison of the Rupture Locations of an Abdominal Aortic Aneurysm
  92. A Finite Element Analysis Rupture Index (FEARI) as an Additional Tool for Abdominal Aortic Aneurysm Rupture Prediction
  93. Improved assessment and treatment of abdominal aortic aneurysms: the use of 3D reconstructions as a surgical guidance tool in endovascular repair
  94. Vessel asymmetry as an additional diagnostic tool in the assessment of abdominal aortic aneurysms
  95. Vascular Cell Adhesion Molecule-1 Expression in Endothelial Cells Exposed to Physiological Coronary Wall Shear Stresses
  96. Hip Protectors in Fracture Prevention for Aging Adults at Risk of Falling
  97. Fluid-Structure Interaction of Pre- and Post-Operative Abdominal Aortic Aneurysms
  98. Water dispersible semiconductor nanorod assemblies via a facile phase transfer and their application as fluorescent biomarkers
  99. Finding Hip Forces in Healthy and Hip Replacement Subjects Using Musculo-Skeletal Modeling
  100. Influence of Asymmetry and Resulting Inflection on Peak Wall Stress in Abdominal Aortic Aneurysms
  101. A Novel In Vitro Method for Assessing the Resistance to Distal Displacement of Endovascular Stent Grafts for Abdominal Aortic Aneurysm Repair
  102. Geometrical Enhancements for Abdominal Aortic Stent-Grafts
  103. Use of finite element analysis in presurgical planning: treatment of mandibular fractures
  104. Analysis of wear and friction of total knee replacements
  105. A Review of the In Vivo and In Vitro Biomechanical Behavior and Performance of Postoperative Abdominal Aortic Aneurysms and Implanted Stent-Grafts
  106. STRENGTH OF ATHEROSCLEROTIC PLAQUE AT CAROTID BIFURCATION
  107. VESSEL ASYMMETRY AS AN ADDITIONAL TOOL FOR ANEURYSM RUPTURE RISK ESTIMATION
  108. BIOMECHANICAL FORCE ATTENUATION OF HIP PROTECTION MATERIALS, A COMPARATIVE STUDY
  109. THE DEVELOPMENT OF A NUMERICAL MASS TRANSPORT MODEL FOR DRUG ELUTING STENTS
  110. INFLUENCE OF MODELLING PARAMETERS ON ABDOMINAL AORTIC ANEURYSM STENT-GRAFTS
  111. MMP AND VEGF REGULATION IN ENDOTHELIAL CELL-SEEDED UBM EXTRACELLULAR MATRIX IN A BIOREACTOR
  112. IMPLICATIONS OF STENTING UBM EXTRACELLULAR MATRIX ON STRENGTH: AN EXPERIMENTAL AND NUMERICAL STUDY
  113. INFLUENCE OF ELEVATED WSS AND WSSGS ON EC GENE EXPRESSION AND ITS CORRELATION TO VNH DEVELOPMENT IN THE VASCULAR ACCESS JUNCTION OF A REALISTIC RADIOCEPHALIC AV FISTULA
  114. ABDOMINAL AORTIC ANEURYSM REPAIR INCREASES SYSTOLIC AORTIC BLOOD PRESSURE – AN IN VITRO STUDY
  115. Affect of Abdominal Aortic Aneurysm Stent-Graft Design on Arterial Haemodynamics
  116. The Influence of Realistic Arteriovenous (AV) Fistula Wall Shear Stress (WSS) on Endothelial Cell (EC) Gene Expression: A Correlation to Intimal Hyperplasia Development
  117. Assessment of Abdominal Aortic Aneurysm Risk: Asymmetry as an Additional Diagnostic Tool?
  118. Fibrin: A Natural Biodegradable Scaffold in Vascular Tissue Engineering
  119. Evidence suggests rigid aortic grafts increase systolic blood pressure: Results of a preliminary study
  120. 3D Reconstruction and Manufacture of Real Abdominal Aortic Aneurysms: From CT Scan to Silicone Model
  121. NUMERICAL AND EXPERIMENTAL TECHNIQUES FOR THE STUDY OF BIOMECHANICS IN THE ARTERIAL SYSTEM
  122. Surgical Feasibility Study of a Novel Polytetrafluoroethylene Graft Design for the Treatment of Peripheral Arterial Disease
  123. Étude de faisabilité chirurgicale d'un nouveau modèle de prothèse en polytétrafluoroéthylène pour le traitement des lésions artérielles périphériques
  124. A Computational Investigation of Blood Flow in Realistic AAA Stent-Grafts
  125. 3D Reconstruction of Patient-Specific Abdominal Aortic Aneurysms: From CT Scan to Silicone Model
  126. Development of Wireless Pressure Measurement System for Short Range medical Applications
  127. Wireless Measurement System for Capacitive pressure Sensors Using Strain Compensated SiGeB
  128. A comparison of modelling techniques for computing wall stress in abdominal aortic aneurysms
  129. Altering end-to-side anastomosis junction hemodynamics: The effects of flow-splitting
  130. Effects of flat, parabolic and realistic steady flow inlet profiles on idealised and realistic stent graft fits through Abdominal Aortic Aneurysms (AAA)
  131. Study of prolong arteriovenous (AV) graft
  132. Reduction of post-operative abdominal aortic graft pressures
  133. Computational fluid dynamics in the development of novel vascular grafts
  134. Numerical modelling of Newtonian and non-Newtonian representation of blood in a distal end-to-side vascular bypass graft anastomosis
  135. Evaluation of 3D UBM (urinary bladder membrane) extracellular matrix vascular construct using a bioreactor flow chamber
  136. Development of a novel system to predict intimal hyperplasia development in an end-to-side distal bypass graft junction
  137. An in vitro assessment of Ancure and Zenith abdominal aortic aneurysm stent-graft devices under physiological conditions
  138. The Prolong® graft: a novel bypass graft for the treatment of peripheral bypass surgery
  139. Endothelial cell adhesion molecule (CAM) expression following exposure to physiological coronary WSS
  140. Investigation of pulsatile mass transport in the downstream graft/artery junction of peripheral bypass grafts
  141. That the end-to-end anastomosis is superior to the end-to-side anastomosis for peripheral bypass surgery: Observations from computational studies
  142. Computational investigations of a new prosthetic femoral-popliteal bypass graft design
  143. Mass Transport Disturbances in the Distal Graft/Artery Junction of a Peripheral Bypass Graft
  144. Injection-Moulded Models of Major and Minor Arteries: The Variability of Model Wall Thickness Owing to Casting Technique
  145. The University of Limerick ProlongTM Vascular Graft
  146. Prediction of Abdominal Aortic Aneurysm (AAA) rupture using numerical and experimental techniques
  147. That Hemodynamics and Not Material Mismatch is of Primary Concern in Bypass Graft Failure: An Experimental Argument
  148. On Reducing Abnormal Hemodynamics in the Femoral End-to-Side Anastomosis: The Influence of Mechanical Factors
  149. 3-D Numerical Simulation of Blood Flow Through Models of the Human Aorta
  150. Experimental Assessment of Stress Patterns in Abdominal Aortic Aneurysms using the Photoelastic Method
  151. Experimental Assessment of Stress Patterns in Abdominal Aortic Aneurysms using the Photoelastic Method
  152. A mathematical model to predict the in vivo pulsatile drag forces acting on bifurcated stent grafts used in endovascular treatment of abdominal aortic aneurysms (AAA)
  153. An evolutionary approach to Wall Shear Stress prediction in a grafted artery
  154. A machine for the preliminary investigation of design features influencing the wear behaviour of knee prostheses
  155. On the Existence of an Optimum End-to-side Junctional Geometry in Peripheral Bypass Surgery—A Computer Generated Study
  156. On using experimentally estimated wall shear stresses to validate numerically predicted results
  157. Arterial wall deformation at heel, toe and bed of distal femoral anastomosis
  158. Wear of ultra-high molecular weight polyethylene (UHMWPE) in total knee prostheses: A review of key influences
  159. Modelling medical devices: The application of bioenginering in surgery
  160. Royal academy of medicine in Ireland section of bioengineering
  161. The influence of slip ratios in contemporary TKR on the wear of ultra-high molecular weight polyethylene (UHMWPE): An experimental view
  162. An investigation into the hemodynamic behaviour of Boston scientific vascular grafts
  163. Sylvester o’halloran surgical scientific meeting
  164. Percutaneous Inferior Vena Caval Approach for Long-term Central Venous Access
  165. Contact stress analysis of the tibial component of prosthetic knee implants
  166. Royal Academy of Medicine in Ireland Section of Bioengineering
  167. An all-Ireland MSc in biomedical engineering