All Stories

  1. Multiwall carbon nanotubes (MWCNTs) dispersion & mechanical effects in OPC mortar & paste: A review
  2. Activation of slag through a combination of NaOH/NaS alkali for transforming it into geopolymer slag binder mortar – assessment the effects of two different Blaine fines and three different curing conditions
  3. Standard and modified falling mass impact tests on preplaced aggregate fibrous concrete and slurry infiltrated fibrous concrete
  4. Properties of Self-Compacting Mortar Containing Slag with Different Finenesses
  5. A Review on Cementitious Materials Including Municipal Solid Waste Incineration Bottom Ash (MSWI-BA) as Aggregates
  6. Affordable and Sustainable Housing in Rwanda
  7. Structural Performance of Reinforced Concrete Beams Incorporating Cathode-Ray Tube (CRT) Glass Waste
  8. Thermo-mechanical and physical properties of waste granular cork composite with slag cement
  9. Effect of Wet Curing and Hot Climate on Strength and Durability of SCC with Natural Pozzolan
  10. Characteristics of Engineered Waste Materials Used for Road Subbase Layers
  11. Effect of using metakaolin as supplementary cementitious material and recycled CRT funnel glass as fine aggregate on the durability of green self-compacting concrete
  12. The efficiency of using CFRP as a strengthening technique for reinforced concrete beams subjected to blast loading
  13. Hydration characteristics and structure formation of cement pastes containing metakaolin
  14. Numerical Derivation of Iso-Damaged Curve for a Reinforced Concrete Beam Subjected to Blast Loading
  15. Numerical analysis of a reinforced concrete beam under blast loading
  16. Metakaolin
  17. The effectiveness of using Raw Sewage Sludge (RSS) as a water replacement in cement mortar mixes containing Unprocessed Fly Ash (u-FA)
  18. Effect of curing time on selected properties of soil stabilized with fly ash, marble dust and waste sand for road sub-base materials
  19. Effect of partial replacement of cement with slag on the early-age strength of concrete
  20. Effect of desulphurised waste on long-term porosity and pore structure of blended cement pastes
  21. Effect of synthesis parameters on the performance of alkali-activated non-conformant EN 450 pulverised fuel ash
  22. Mechanical and physical properties of concrete containing FGD waste
  23. Valorisation of waste expanded polystyrene in concrete using a novel recycling technique
  24. Principles for developing an effective framework to control minerals and rocks extraction impacts, mitigate waste and optimise sustainable quarries management
  25. Structural behaviour of reinforced concrete beams containing a novel lightweight aggregate
  26. The sustainability of lightweight aggregates manufactured from clay wastes for reducing the carbon footprint of structural and foundation concrete
  27. Sustainability of sewage sludge in construction
  28. Sustainability of compressed earth as a construction material
  29. Sustainability of desulphurised (FGD) waste in construction
  30. Introduction
  31. Conclusion
  32. Effects of the addition of nanosilica on the rheology, hydration and development of the compressive strength of cement mortars
  33. Digital imaging 2D and 3D particle assessment using a flat-bed scanner
  34. Effect of nanosilica addition on the fresh properties and shrinkage of mortars with fly ash and superplasticizer
  35. The performance of lightweight reinforced concrete beams
  36. Using metal plates for measurement of cement dust emission
  37. A simplified model for the prediction of long term concrete drying shrinkage
  38. Fracture behaviour of concrete containing limestone fines
  39. Conceptualisation and pilot study of shelled compressed earth block for sustainable housing in Nigeria
  40. Improving biodegradability of polyvinyl alcohol/starch blend films for packaging applications
  41. Pore size distribution of cement pastes containing fly ash-gypsum blends cured for 7 days
  42. Sustainable construction and low-carbon dioxide concrete: Algeria case
  43. The Influence of the Fineness of Mineral Additions on Strength and Drying Shrinkage of Self-Compacting Mortars
  44. Effects of Surfactants on the Properties of Mortar Containing Styrene/Methacrylate Superplasticizer
  45. Effect of Copolymer Latexes on Physicomechanical Properties of Mortar Containing High Volume Fly Ash as a Replacement Material of Cement
  46. Lime Activated Fly Ash Paste in the Presence of Metakaolin
  47. Effect of pH on the physico-mechanical properties and miscibility of methyl cellulose/poly(acrylic acid) blends
  48. Effect of initial curing on absorption and pore size distribution of paste and concrete containing slag
  49. Early age porosity and pore size distribution of cement paste with flue gas desulphurisation (FGD) waste
  50. Capillarity of concrete incorporating waste foundry sand
  51. Lightweight Concrete Incorporating Waste Expanded Polystyrene
  52. The perceptions of contractor's and landlord's representatives in the refurbishment of tower blocks
  53. Effect of fly ash–gypsum blend on porosity and pore size distribution of cement pastes
  54. The perceptions of tenants in the refurbishment of tower blocks
  55. The Use of Raw Sewage Sludge (RSS) As a Water Replacement in Cement-Based Mixes
  56. Durability of mortar and concretes containing slag with low hydraulic activity
  57. Progress in Eco and Resilient Construction Materials Development
  58. The use of mineral magnetic measurements as a particulate matter (PM) proxy for road deposited sediments (RDS): Marylebone Road, London
  59. WASTEWATER MANAGEMENT IN A NIGERIAN LEPER COLONY
  60. Voidage assessment of concrete using digital image processing
  61. Dimensional Change and Strength of Mortars Containing Fly Ash and Metakaolin
  62. Low Temperature Curing of Metakaolin Concrete
  63. Abrasion resistance and mechanical properties of high-volume fly ash concrete
  64. Application of mineral magnetic concentration measurements as a particle size proxy for urban road deposited sediments
  65. Strength and durability of concrete incorporating crushed limestone sand
  66. Sustainability of construction materials
  67. Introduction
  68. Strength properties of high-volume fly ash (HVFA) concrete incorporating steel fibres
  69. Possible utilization of wheat husk ash waste in the production of precast concrete elements
  70. Adiabatic temperature rise of metakaolin mortar
  71. Visual examination of mortars containing flue gas desulphurisation waste subjected to magnesium sulphate solution
  72. Effect of cement type on strength development of mortars containing limestone fines
  73. Effect of GGBFS and GSS on the properties of mortar
  74. Performance of self-compacting concrete containing fly ash
  75. Metakaolin concrete at a low water to binder ratio
  76. Sulfate resistance of mortar containing simulated FGD waste
  77. Sustainability and Emerging Concrete Materials and Their Relevance to the Middle East
  78. Challenges of waste management in a Nigerian leper colony
  79. Use of recycled plastic in concrete: A review
  80. Antecedents and benefits of 3D and 4D modelling for construction planners
  81. Optimum utilisation of FGD waste in blended binders
  82. Selected engineering properties of concrete incorporating slag and metakaolin
  83. Properties of concrete incorporating fine recycled aggregate
  84. Absorption characteristics of metakaolin concrete
  85. A reply to the discussion by M. Collepardi of the paper, “Influence of high temperature and low humidity curing on chloride penetration in blended cement concrete”
  86. A discussion of the paper, “Influence of high temperature and low humidity curing on chloride penetration in blended cement concrete,” by J.M. Khatib and P.S. Mangat
  87. Porosity of cement paste cured at 45 °C as a function of location relative to casting position
  88. Influence of high-temperature and low-humidity curing on chloride penetration in blended cement concrete
  89. Influence of superplasticizer and curing on porosity and pore structure of cement paste
  90. Sulphate Resistance of Metakaolin Mortar
  91. Sulphate resistance of mortar, containing ground brick clay calcined at different temperatures
  92. Portlandite consumption in metakaolin cement pastes and mortars
  93. Pore size distribution of metakaolin paste
  94. Relative strength, pozzolanic activity and cement hydration in superplasticised metakaolin concrete
  95. Factors influencing strength development of concrete containing silica fume
  96. Absorption characteristics of concrete as a function of location relative to casting position
  97. The influence of gypsum content on the porosity and pore-size distribution of cured PFA—lime mixes
  98. Microstructure, chloride diffusion and reinforcement corrosion in blended cement paste and concrete
  99. Influence of initial curing on sulphate resistance of blended cement concrete