All Stories

  1. Design and fabrication of a polydimethylsiloxane device for evaluating the effect of pillar geometry and configuration in the flow separation using deterministic lateral displacement

    Article • RSC Advances, January 2024, Royal Society of Chemistry

    Professor Lingxue Kong

  2. Cotton yarns decorated with hydrothermally reduced graphene oxide for flexible supercapacitors

    Article • Industrial Crops and Products, December 2023, Elsevier

    Professor Lingxue Kong

  3. Polyaniline-based adsorbents for water treatment: Roles of low-cost materials and 2D materials

    Article • Chemical Engineering Journal, December 2023, Elsevier

    Professor Lingxue Kong

  4. Durable and comfortable electrospun nanofiber membranes for face mask applications

    Article • Separation and Purification Technology, October 2023, Elsevier

    Professor Lingxue Kong

  5. Facile electrochemical anodisation for generating nanopores across visible light-responsive cerium-titanium oxide heterojunctions for environmental remediation

    Article • Journal of Environmental Chemical Engineering, October 2023, Elsevier

    Professor Lingxue Kong

  6. Enhanced pollutant photodegradation over nanoporous titanium-vanadium oxides with improved interfacial interactions

    Article • Journal of Colloid and Interface Science, September 2023, Elsevier

    Professor Lingxue Kong

  7. Boosting Plant Photosynthesis with Carbon Dots: A Critical Review of Performance and Prospects

    Article • Small, June 2023, Wiley

    Professor Lingxue Kong

  8. Dry-spun carbon nanotube ultrafiltration membranes tailored by anti-viral metal oxide coatings for human coronavirus 229E capture in water

    Article • Journal of Environmental Chemical Engineering, June 2023, Elsevier

    Professor Lingxue Kong

  9. Lyotropic Liquid Crystal (LLC)-Templated Nanofiltration Membranes by Precisely Administering LLC/Substrate Interfacial Structure

    Article • Membranes, May 2023, MDPI AG

    Professor Lingxue Kong

  10. Carbon nanofibre microfiltration membranes tailored by oxygen plasma for electrocatalytic wastewater treatment in cross-flow reactors

    Article • Journal of Membrane Science, May 2023, Elsevier

    Professor Lingxue Kong

  11. Bacteria-Premised Nanobiopesticides for the Management of Phytopathogens and Pests

    Article • ACS Agricultural Science & Technology, April 2023, American Chemical Society (ACS)

    Professor Lingxue Kong

  12. Gas flow enhanced mass transfer in vacuum membrane distillation

    Article • Desalination, April 2023, Elsevier

    Professor Lingxue Kong

  13. Electrocatalytic ultrafiltration membrane reactors designed from dry-spun self-standing carbon nanotube sheets

    Article • Chemical Engineering Journal, February 2023, Elsevier

    Professor Lingxue Kong

  14. Schottky-like photo/electro-catalytic carbon nanotube composite ultrafiltration membrane reactors

    Article • Carbon, February 2023, Elsevier

    Professor Lingxue Kong

  15. Microstructure features and carbon partitioning in low temperature bainitic steels: The effect of magnetic field

    Article • Materials Characterization, February 2023, Elsevier

    Professor Lingxue Kong

  16. Green Fabrication of Agglomeration-Reductive and Electrochemical-Active Reduced Graphene Oxide/Polymerized Proanthocyanidins Electrode for High-Performance Supercapacitor

    Article • ACS Applied Engineering Materials, January 2023, American Chemical Society (ACS)

    Professor Lingxue Kong

  17. A review of boron nitride-based photocatalysts for carbon dioxide reduction

    Article • Journal of Materials Chemistry A, January 2023, Royal Society of Chemistry

    Professor Lingxue Kong

  18. Stimuli-responsive heterojunctions based photo-electrocatalytic membrane reactors for reactive filtration of persistent organic pollutants

    Article • Chemical Engineering Journal, January 2023, Elsevier

    Professor Lingxue Kong

  19. Mechanism of porosity development and defect engineering in chemically activated woven carbon fibres

    Article • New Journal of Chemistry, January 2023, Royal Society of Chemistry

    Professor Lingxue Kong

  20. Nanobionics-Driven Synthesis of Molybdenum Oxide Nanosheets with Tunable Plasmonic Resonances in Visible Light Regions

    Article • ACS Applied Materials & Interfaces, December 2022, American Chemical Society (ACS)

    Professor Lingxue Kong

  21. Inhibition of Autophagy Promotes the Elimination of Liver Cancer Stem Cells by CD133 Aptamer-Targeted Delivery of Doxorubicin

    Article • Biomolecules, November 2022, MDPI AG

    Professor Lingxue Kong

  22. Waste-derived low-cost ceramic membranes for water treatment: Opportunities, challenges and future directions

    Article • Resources Conservation and Recycling, October 2022, Elsevier

    Distinguished Professor Yasin Orooji, Professor Lingxue Kong

  23. Flux vs. permeability: How to effectively evaluate mass transfer performance of membranes in oil-water separation

    Article • Journal of Water Process Engineering, October 2022, Elsevier

    Professor Lingxue Kong

  24. In Situ Growth of Cu/CuO/Cu2O Nanocrystals within Hybrid Nanofibers for Adsorptive Arsenic Removal

    Article • ACS Applied Nano Materials, September 2022, American Chemical Society (ACS)

    Professor Lingxue Kong

  25. Photocatalytic-triggered nanopores across multilayer graphene for high-permeation membranes

    Article • Chemical Engineering Journal, September 2022, Elsevier

    Professor Lingxue Kong, Albert Guirguis

  26. Waste-derived carbon fiber membrane with hierarchical structures for enhanced oil-in-water emulsion separation: Performance and mechanisms

    Article • Journal of Membrane Science, July 2022, Elsevier

    Professor Lingxue Kong

  27. Oxidized Chitosan-Tobramycin (OCS-TOB) Submicro-Fibers for Biomedical Applications

    Article • Pharmaceutics, June 2022, MDPI AG

    Professor Lingxue Kong

  28. Atomically-thin Schottky-like photo-electrocatalytic cross-flow membrane reactors for ultrafast remediation of persistent organic pollutants

    Article • Water Research, June 2022, Elsevier

    Professor Lingxue Kong

  29. Temperature-Responsive Aldehyde Hydrogels with Injectable, Self-Healing, and Tunable Mechanical Properties

    Article • Biomacromolecules, May 2022, American Chemical Society (ACS)

    Professor Lingxue Kong

  30. Plasmon-induced long-lived hot electrons in degenerately doped molybdenum oxides for visible-light-driven photochemical reactions

    Article • Materials Today, May 2022, Elsevier

    Professor Lingxue Kong

  31. Isolating motile sperm cell sorting using biocompatible electrospun membranes

    Article • Scientific Reports, April 2022, Springer Science + Business Media

    Professor Lingxue Kong

  32. Significant roles of substrate properties in forward osmosis membrane performance: A review

    Article • Desalination, April 2022, Elsevier

    Professor Lingxue Kong

  33. Towards next generation high throughput ion exchange membranes for downstream bioprocessing: A review

    Article • Journal of Membrane Science, April 2022, Elsevier

    Professor Lingxue Kong

  34. Constructing novel nanofibrous polyacrylonitrile (PAN)-based anion exchange membrane adsorber for protein separation

    Article • Separation and Purification Technology, March 2022, Elsevier

    Professor Lingxue Kong

  35. Thermally-stable photo-curing chemistry for additive manufacturing by direct melt electrowriting

    Article • Additive Manufacturing, March 2022, Elsevier

    Professor Lingxue Kong

  36. Synthesis of porous iron hydroxy phosphate from phosphate residue and its application as a Fenton-like catalyst for dye degradation

    Article • Journal of Environmental Sciences, February 2022, Elsevier

    Professor Lingxue Kong

  37. Controlling phase and rheological behaviours of hexagonal lyotropic liquid crystalline templates for nanostructural administration and retention

    Article • Journal of Colloid and Interface Science, February 2022, Elsevier

    Professor Lingxue Kong

  38. Top-down synthesis nanosieve graphene by light

    Article • Advanced Materials Interfaces, January 2022, Wiley

    Albert Guirguis, Professor Lingxue Kong

  39. Engineering Schottky-like and heterojunction materials for enhanced photocatalysis performance – a review

    Article • Materials Advances, January 2022, Royal Society of Chemistry

    Professor Lingxue Kong

  40. Towards a High-Flux Separation Layer from Hexagonal Lyotropic Liquid Crystals for Thin-Film Composite Membranes

    Article • Membranes, October 2021, MDPI AG

    Professor Lingxue Kong

  41. Zwitterionic Block Copolymer Prodrug Micelles for pH Responsive Drug Delivery and Hypoxia-Specific Chemotherapy

    Article • Molecular Pharmaceutics, September 2021, American Chemical Society (ACS)

    Professor Lingxue Kong, Jacinta Frances White

  42. Chironomidae (Midge) Sensitivities to Ammonia Using Multiple Endpoints in China and Australia for the Development of Water Quality Criteria for Freshwater River Systems in China

    Article • Environmental Toxicology and Chemistry, August 2021, Wiley

    Professor Lingxue Kong

  43. Meltblown fabric vs nanofiber membrane, which is better for fabricating personal protective equipments

    Article • Chinese Journal of Chemical Engineering, August 2021, Elsevier

    Professor Lingxue Kong

  44. Multi-Functional Core-Shell Nanofibers for Wound Healing

    Article • Nanomaterials, June 2021, MDPI AG

    Professor Lingxue Kong

  45. Rational design for enhancing mechanical and conductive properties of Ti3C2 MXene based elastomer composites

    Article • Composites Communications, June 2021, Elsevier

    Professor Lingxue Kong

  46. Correction to “Dual-Cross-Linked Network Hydrogels with Multiresponsive, Self-Healing, and Shear Strengthening Properties”

    Article • Biomacromolecules, April 2021, American Chemical Society (ACS)

    Professor Lingxue Kong

  47. Predicting Operating Rules for Successful Melt Electrowriting

    Article • ACS Applied Polymer Materials, March 2021, American Chemical Society (ACS)

    Professor Lingxue Kong

  48. Substrate-Independent, Regenerable Anti-Biofouling Coating for Polymeric Membranes

    Article • Membranes, March 2021, MDPI AG

    Professor Lingxue Kong

  49. Nanoscale 2D semi-conductors – Impact of structural properties on light propagation depth and photocatalytic performance

    Article • Separation and Purification Technology, March 2021, Elsevier

    Professor Lingxue Kong

  50. Carbon nanotube membranes – Strategies and challenges towards scalable manufacturing and practical separation applications

    Article • Separation and Purification Technology, February 2021, Elsevier

    Professor Lingxue Kong

  51. Constructing conductive titanium carbide nanosheet (MXene) network on polyurethane/polyacrylonitrile fibre framework for flexible strain sensor

    Article • Journal of Colloid and Interface Science, February 2021, Elsevier

    Professor Lingxue Kong

  52. Engineering antifouling reverse osmosis membranes: A review

    Article • Desalination, February 2021, Elsevier

    Professor Lingxue Kong

  53. Interphase precipitation hardening of a TiMo microalloyed dual-phase steel produced by continuous cooling

    Article • Materials Science and Engineering A, February 2021, Elsevier

    Professor Lingxue Kong

  54. Omniphobic membranes for distillation: Opportunities and challenges

    Article • Chinese Chemical Letters, February 2021, Elsevier

    Professor Lingxue Kong

  55. Electro-catalytic membrane reactors for the degradation of organic pollutants – a review

    Article • Reaction Chemistry & Engineering, January 2021, Royal Society of Chemistry

    Professor Lingxue Kong

  56. Dual-Cross-Linked Network Hydrogels with Multiresponsive, Self-Healing, and Shear Strengthening Properties

    Article • Biomacromolecules, December 2020, American Chemical Society (ACS)

    Professor Lingxue Kong

  57. Author Correction: Aptamer-mediated survivin RNAi enables 5-fluorouracil to eliminate colorectal cancer stem cells

    Article • Scientific Reports, December 2020, Springer Science + Business Media

    Professor Lingxue Kong

  58. Edible films and coatings for shelf life extension of mango: a review

    Article • Critical Reviews in Food Science and Nutrition, December 2020, Taylor & Francis

    Professor Lingxue Kong

  59. Integrated membrane system without adding chemicals for produced water desalination towards zero liquid discharge

    Article • Desalination, December 2020, Elsevier

    Professor Lingxue Kong

  60. Facile Preparation of Macromolecular Prodrugs for Hypoxia-Specific Chemotherapy

    Article • ACS Macro Letters, November 2020, American Chemical Society (ACS)

    Professor Lingxue Kong

  61. Stimulation of photosynthesis and enhancement of growth and yield in Arabidopsis thaliana treated with amine-functionalized mesoporous silica nanoparticles

    Article • Plant Physiology and Biochemistry, November 2020, Elsevier

    Professor Lingxue Kong

  62. Solvent crystallization-induced porous polyurethane/graphene composite foams for pressure sensing

    Article • Composites Part B Engineering, August 2020, Elsevier

    Professor Lingxue Kong

  63. Functional Nanofibrous Biomaterials of Tailored Structures for Drug Delivery—A Critical Review

    Article • Pharmaceutics, June 2020, MDPI AG

    Professor Lingxue Kong

  64. Relating forward water and reverse salt fluxes to membrane porosity and tortuosity in forward osmosis: CFD modelling

    Article • Separation and Purification Technology, June 2020, Elsevier

    Professor Lingxue Kong

  65. A novel approach to determining piezoelectric properties of nanogenerators based on PVDF nanofibers using iterative finite element simulation for walking energy harvesting

    Article • Journal of Industrial Textiles, May 2020, SAGE Publications

    Professor Lingxue Kong

  66. Functionalized polyacrylonitrile fibers with durable antibacterial activity and superior Cu(II)-removal performance

    Article • Materials Chemistry and Physics, April 2020, Elsevier

    Professor Lingxue Kong

  67. Release of hazardous nanoplastic contaminants due to microplastics fragmentation under shear stress forces

    Article • Journal of Hazardous Materials, February 2020, Elsevier

    Professor Lingxue Kong

  68. Applications of nano-porous graphene materials – critical review on performance and challenges

    Article • Materials Horizons, January 2020, Royal Society of Chemistry

    Professor Lingxue Kong, Albert Guirguis

  69. Aptamer-guided extracellular vesicle theranostics in oncology

    Article • Theranostics, January 2020, Ivyspring International Publisher

    Professor Lingxue Kong

  70. Numerical identification of critical erosion prone areas in tube heat exchangers

    Article • Engineering Applications of Computational Fluid Mechanics, January 2020, Taylor & Francis

    Professor Lingxue Kong

  71. Catalytic electrospun nano-composite membranes for virus capture and remediation

    Article • Separation and Purification Technology, December 2019, Elsevier

    Professor Lingxue Kong

  72. Perforation routes towards practical nano-porous graphene and analogous materials engineering

    Article • Carbon, December 2019, Elsevier

    Professor Lingxue Kong, Albert Guirguis

  73. Evolution of structural dimensions in mesoporous template precursor from hexagonal lyotropic liquid crystals

    Article • Journal of Physics Condensed Matter, November 2019, Institute of Physics Publishing

    Professor Lingxue Kong

  74. Nanoapplication of a Resistance Inducer to Reduce Phytophthora Disease in Pineapple (Ananas comosus L.)

    Article • Frontiers in Plant Science, October 2019, Frontiers

    Professor Lingxue Kong

  75. Atomically Thin Boron Nitride as an Ideal Spacer for Metal-Enhanced Fluorescence

    Article • ACS Nano, October 2019, American Chemical Society (ACS)

    Professor Lingxue Kong

  76. Hybrid graphene-decorated metal hollow fibre membrane reactors for efficient electro-Fenton - Filtration co-processes

    Article • Journal of Membrane Science, October 2019, Elsevier

    Professor Lingxue Kong

  77. High Efficiency Fabrication of Chitosan Composite Nanofibers with Uniform Morphology via Centrifugal Spinning

    Article • Polymers, September 2019, MDPI AG

    Professor Lingxue Kong

  78. Exosomes and Nanoengineering: A Match Made for Precision Therapeutics

    Article • Advanced Materials, September 2019, Wiley

    Professor Lingxue Kong

  79. Immobilisation of microperoxidase-11 into layered MoO3 for applications of enzymatic conversion

    Article • Applied Materials Today, September 2019, Elsevier

    Professor Lingxue Kong

  80. Review on Sperm Sorting Technologies and Sperm Properties toward New Separation Methods via the Interface of Biochemistry and Material Science

    Article • Advanced Biosystems, August 2019, Wiley

    Professor Lingxue Kong

  81. pH-responsive ultrasonic self-assembly spinosad-loaded nanomicelles and their antifungal activity to Fusarium oxysporum

    Article • Reactive and Functional Polymers, August 2019, Elsevier

    Professor Lingxue Kong

  82. Mixed Matrix Poly(Vinyl Alcohol)-Copper Nanofibrous Anti-Microbial Air-Microfilters

    Article • Membranes, July 2019, MDPI AG

    Professor Lingxue Kong

  83. Fabrication of Pd-TiO2 nanotube photoactive junctions via Atomic Layer Deposition for persistent pesticide pollutants degradation

    Article • Applied Surface Science, July 2019, Elsevier

    Professor Lingxue Kong

  84. Fabrication and properties of elastic fibers from electrospinning natural rubber

    Article • Journal of Applied Polymer Science, June 2019, Wiley

    Professor Lingxue Kong

  85. Wrinkled silica doped electrospun nano-fiber membranes with engineered roughness for advanced aerosol air filtration

    Article • Separation and Purification Technology, May 2019, Elsevier

    Professor Lingxue Kong

  86. Deriving site-specific water quality criteria for ammonia from national versus international toxicity data

    Article • Ecotoxicology and Environmental Safety, April 2019, Elsevier

    Professor Lingxue Kong

  87. Preparation of Catalyst by Phosphating Slag and Its Photocatalytic Performance on Rhodamine B and Methyl Orange

    Article • IOP Conference Series Materials Science and Engineering, March 2019, Institute of Physics Publishing

    Professor Lingxue Kong

  88. Sub-10-nm Mixed Titanium/Tantalum Oxide Nanoporous Films with Visible-Light Photocatalytic Activity for Water Treatment

    Article • ACS Applied Nano Materials, March 2019, American Chemical Society (ACS)

    Professor Lingxue Kong

  89. Synthesis of nitrogen-doped carbon nanotubes-FePO4 composite from phosphate residue and its application as effective Fenton-like catalyst for dye degradation

    Article • Journal of Environmental Sciences, February 2019, Elsevier

    Professor Lingxue Kong

  90. Discrete silver nanoparticle infusion across silica aerogels towards versatile catalytic coatings for 4-nitrophenol reduction

    Article • Materials Chemistry and Physics, February 2019, Elsevier

    Professor Lingxue Kong

  91. Nickel Stamp Fabrication using SU-8 Lithography for Micro Hot-Embossing Serpentine Microfluidic Channels.

    Article • International Journal of Precision Technology, January 2019, Inderscience Publishers

    Professor Lingxue Kong

  92. Flexible hybrid structure piezoelectric nanogenerator based on ZnO nanorod/PVDF nanofibers with improved output

    Article • RSC Advances, January 2019, Royal Society of Chemistry

    Professor Lingxue Kong

  93. CO2 sponge from plasma enhanced seeded growth of metal organic frameworks across carbon nanotube bucky-papers

    Article • Separation and Purification Technology, January 2019, Elsevier

    Professor Lingxue Kong

  94. Enhanced Visible Light Sensitization of N-Doped TiO2 Nanotubes Containing Ti-Oxynitride Species Fabricated via Electrochemical Anodization of Titanium Nitride

    Article • The Journal of Physical Chemistry C, December 2018, American Chemical Society (ACS)

    Professor Lingxue Kong, Albert Guirguis

  95. In Situ SAXS Measurement and Molecular Dynamics Simulation of Magnetic Alignment of Hexagonal LLC Nanostructures

    Article • Membranes, December 2018, MDPI AG

    Professor Lingxue Kong

  96. Sub-50 nm amorphous iron phosphate dihydrate nanoplates fabricated via liquid exfoliation from recycled steelmaking phosphate slag

    Article • Materials Letters, December 2018, Elsevier

    Professor Lingxue Kong

  97. Tuning micro-wrinkled graphene films for stretchable conductors of controllable electrical conductivity

    Article • Carbon, November 2018, Elsevier

    Professor Lingxue Kong

  98. An in-situ small angle x ray scattering analysis of nanopore formation during thermally induced chemical dealloying of brass thin foils

    Article • Scientific Reports, October 2018, Springer Science + Business Media

    Professor Lingxue Kong

  99. In Situ SAXS Measurement and Molecular Dynamics Simulation of Magnetic Alignment of Hexagonal LLC Nanostructures

    Article • October 2018, MDPI AG

    Professor Lingxue Kong

  100. Short Review on Porous Metal Membranes—Fabrication, Commercial Products, and Applications

    Article • Membranes, September 2018, MDPI AG

    Professor Lingxue Kong

  101. Plasma Modification and Synthesis of Membrane Materials—A Mechanistic Review

    Article • Membranes, August 2018, MDPI AG

    Professor Lingxue Kong

  102. Tailored Mesoporous Silica Nanoparticles for Controlled Drug Delivery: Platform Fabrication, Targeted Delivery, and Computational Design and Analysis

    Article • Mini-Reviews in Medicinal Chemistry, June 2018, Bentham Science Publishers

    Professor Lingxue Kong

  103. Functional Nanoporous Titanium Dioxide for Separation Applications: Synthesis Routes and Properties to Performance Analysis

    Article • May 2018, Springer Science + Business Media

    Professor Lingxue Kong

  104. Single step synthesis of Schottky-like hybrid graphene - titania interfaces for efficient photocatalysis

    Article • Scientific Reports, May 2018, Springer Science + Business Media

    Professor Lingxue Kong

  105. Electro-capture of heavy metal ions with carbon cloth integrated microfluidic devices

    Article • Separation and Purification Technology, April 2018, Elsevier

    Professor Lingxue Kong

  106. Delivery of Abscisic Acid to Plants Using Glutathione Responsive Mesoporous Silica Nanoparticles

    Article • Journal of Nanoscience and Nanotechnology, March 2018, American Scientific Publishers

    Professor Lingxue Kong

  107. Mesoporous silica nanorods toward efficient loading and intracellular delivery of siRNA

    Article • Journal of Nanoparticle Research, February 2018, Springer Science + Business Media

    Professor Lingxue Kong

  108. Nanofiber-Based Materials for Persistent Organic Pollutants in Water Remediation by Adsorption

    Article • Applied Sciences, January 2018, MDPI AG

    Professor Lingxue Kong

  109. Nanofibers for Water Treatment

    Article • January 2018, Springer Science + Business Media

    Professor Lingxue Kong

  110. The growth of high density network of MOF nano-crystals across macroporous metal substrates – Solvothermal synthesis versus rapid thermal deposition

    Article • Applied Surface Science, January 2018, Elsevier

    Professor Lingxue Kong

  111. Synthesis of Mn3O4 nano-materials via CTAB/SDS vesicle templating for high performance supercapacitors

    Article • Materials Letters, January 2018, Elsevier

    Professor Lingxue Kong

  112. Modified iron phosphate/polyvinyl alcohol composite film for controlled-release fertilisers

    Article • RSC Advances, January 2018, Royal Society of Chemistry

    Professor Lingxue Kong

  113. Proton-Exchange-Induced Configuration Rearrangement in a Poly(ionic liquid) Solution: A NMR Study

    Article • The Journal of Physical Chemistry Letters, October 2017, American Chemical Society (ACS)

    Professor Lingxue Kong

  114. Homogeneous isolation of nanocellulose from eucalyptus pulp by high pressure homogenization

    Article • Industrial Crops and Products, October 2017, Elsevier

    Professor Lingxue Kong

  115. Inorganic Nanoparticles/Metal Organic Framework Hybrid Membrane Reactors for Efficient Photocatalytic Conversion of CO2

    Article • ACS Applied Materials & Interfaces, September 2017, American Chemical Society (ACS)

    Professor Lingxue Kong

  116. Plasmonic substrates for surface enhanced Raman scattering

    Article • Analytica Chimica Acta, September 2017, Elsevier

    Professor Lingxue Kong

  117. High Efficiency Poly(acrylonitrile) Electrospun Nanofiber Membranes for Airborne Nanomaterials Filtration

    Article • Advanced Engineering Materials, August 2017, Wiley

    Professor Lingxue Kong

  118. Preparation of Porous Stainless Steel Hollow-Fibers through Multi-Modal Particle Size Sintering towards Pore Engineering

    Article • Membranes, August 2017, MDPI AG

    Professor Lingxue Kong

  119. Toward the Fabrication of Advanced Nanofiltration Membranes by Controlling Morphologies and Mesochannel Orientations of Hexagonal Lyotropic Liquid Crystals

    Article • Membranes, July 2017, MDPI AG

    Professor Lingxue Kong

  120. Electro-Catalytic Biodiesel Production from Canola Oil in Methanolic and Ethanolic Solutions with Low-Cost Stainless Steel and Hybrid Ion-Exchange Resin Grafted Electrodes

    Article • Frontiers in Materials, July 2017, Frontiers

    Professor Lingxue Kong

  121. Aptamer-mediated survivin RNAi enables 5-fluorouracil to eliminate colorectal cancer stem cells

    Article • Scientific Reports, July 2017, Springer Science + Business Media

    Professor Lingxue Kong

  122. Effects of a volatile solvent with low surface tension combining with the silica network reinforcement on retention of LLC structure in polymer matrix

    Article • Polymer Bulletin, May 2017, Springer Science + Business Media

    Professor Lingxue Kong

  123. Hybrid thin film nano-composite membrane reactors for simultaneous separation and degradation of pesticides

    Article • Journal of Membrane Science, April 2017, Elsevier

    Professor Lingxue Kong

  124. Silver metal nano-matrixes as high efficiency and versatile catalytic reactors for environmental remediation

    Article • Scientific Reports, March 2017, Springer Science + Business Media

    Professor Lingxue Kong

  125. Insights into Free Volume Variations across Ion-Exchange Membranes upon Mixed Solvents Uptake by Small and Ultrasmall Angle Neutron Scattering

    Article • ACS Applied Materials & Interfaces, March 2017, American Chemical Society (ACS)

    Professor Lingxue Kong

  126. Numerical investigation of erosion of tube sheet and tubes of a shell and tube heat exchanger

    Article • Computers & Chemical Engineering, January 2017, Elsevier

    Professor Lingxue Kong

  127. Metal organic framework based catalysts for CO2 conversion

    Article • Materials Horizons, January 2017, Royal Society of Chemistry

    Professor Lingxue Kong

  128. Controlled porosity and pore size of nano-porous gold by thermally assisted chemical dealloying – a SAXS study

    Article • RSC Advances, January 2017, Royal Society of Chemistry

    Professor Lingxue Kong

  129. Research on Battery Box Lightweight Based on Material Replacement

    Article • January 2017, Atlantis Press

    Professor Lingxue Kong

  130. Transforming doxorubicin into a cancer stem cell killer via EpCAM aptamer-mediated delivery

    Article • Theranostics, January 2017, Ivyspring International Publisher

    Professor Lingxue Kong

  131. One-pot synthesized mesoporous Ni–Co hydroxide for high performance supercapacitors

    Article • Ionics, December 2016, Springer Science + Business Media

    Professor Lingxue Kong

  132. Ultrahigh volumetric capacitance biomorphic porous carbon material derived from mold

    Article • Materials Letters, December 2016, Elsevier

    Professor Lingxue Kong

  133. Insights into Surface Interactions between Metal Organic Frameworks and Gases during Transient Adsorption and Diffusion by In-Situ Small Angle X-ray Scattering

    Article • Membranes, September 2016, MDPI AG

    Professor Lingxue Kong

  134. Molecular dynamics approach to the structural characterization and transport properties of poly(acrylonitrile)/N,N-dimethylformamide solutions

    Article • Journal of Molecular Liquids, July 2016, Elsevier

    Professor Lingxue Kong

  135. Mesoporous silica nanoparticles enhance seedling growth and photosynthesis in wheat and lupin

    Article • Chemosphere, June 2016, Elsevier

    Professor Lingxue Kong

  136. Nanoparticulate Drug Delivery to Colorectal Cancer: Formulation Strategies and Surface Engineering

    Article • Current Pharmaceutical Design, May 2016, Bentham Science Publishers

    Professor Lingxue Kong

  137. Superhydrophobic and Superoleophilic Micro-Wrinkled Reduced Graphene Oxide as a Highly Portable and Recyclable Oil Sorbent

    Article • ACS Applied Materials & Interfaces, April 2016, American Chemical Society (ACS)

    Professor Lingxue Kong

  138. Design and Properties of Graphene-Based Three Dimensional Architectures

    Article • April 2016, Taylor & Francis

    Professor Lingxue Kong

  139. Formation of nanoscale titanium carbides in ferrite: an atomic study

    Article • Applied Physics A, March 2016, Springer Science + Business Media

    Professor Lingxue Kong

  140. Ethephon Increases Rubber Tree Latex Yield by Regulating Aquaporins and Alleviating the Tapping-Induced Local Increase in Latex Total Solid Content

    Article • Journal of Plant Growth Regulation, February 2016, Springer Science + Business Media

    Professor Lingxue Kong

  141. Manufacturing Techniques and Surface Engineering of Polymer Based Nanoparticles for Targeted Drug Delivery to Cancer

    Article • Nanomaterials, February 2016, MDPI AG

    Professor Lingxue Kong

  142. Selective removal of anionic dyes using poly(N,N-dimethyl amino ethylmethacrylate) functionalized graphene oxide

    Article • RSC Advances, January 2016, Royal Society of Chemistry

    Professor Lingxue Kong

  143. Study of growth mechanism of TiC cluster in ferrite via molecular dynamics simulation

    Article • Materials Letters, November 2015, Elsevier

    Professor Lingxue Kong

  144. Shrinkage induced stretchable micro-wrinkled reduced graphene oxide composite with recoverable conductivity

    Article • Carbon, November 2015, Elsevier

    Professor Lingxue Kong

  145. Control of Partial Coalescence of Self-Assembled Metal Nano-Particles across Lyotropic Liquid Crystals Templates towards Long Range Meso-Porous Metal Frameworks Design

    Article • Nanomaterials, October 2015, MDPI AG

    Professor Lingxue Kong

  146. Simultaneous crystallization and decomposition of PVA/MMT composites during non-isothermal process

    Article • Thermochimica Acta, October 2015, Elsevier

    Professor Lingxue Kong

  147. Reinforcement and deformation behaviors of polyvinyl alcohol/graphene/montmorillonite clay composites

    Article • Composites Science and Technology, October 2015, Elsevier

    Professor Lingxue Kong

  148. Decomposition properties of PVA/graphene composites during melting-crystallization

    Article • Polymer Degradation and Stability, September 2015, Elsevier

    Professor Lingxue Kong

  149. Synthesis of LiFePO4@carbon nanotube core–shell nanowires with a high-energy efficient method for superior lithium ion battery cathodes

    Article • Journal of Power Sources, September 2015, Elsevier

    Professor Lingxue Kong

  150. A New Insight into Growth Mechanism and Kinetics of Mesoporous Silica Nanoparticles by in Situ Small Angle X-ray Scattering

    Article • Langmuir, August 2015, American Chemical Society (ACS)

    Professor Lingxue Kong

  151. Understanding water and ion transport behaviour and permeability through poly(amide) thin film composite membrane

    Article • Journal of Membrane Science, August 2015, Elsevier

    Professor Lingxue Kong

  152. Multifunctional Polymer/Porous Boron Nitride Nanosheet Membranes for Superior Trapping Emulsified Oils and Organic Molecules

    Article • Advanced Materials Interfaces, July 2015, Wiley

    Professor Lingxue Kong

  153. Promoted water transport across graphene oxide–poly(amide) thin film composite membranes and their antibacterial activity

    Article • Desalination, June 2015, Elsevier

    Professor Lingxue Kong

  154. Investigation of hybrid ion-exchange membranes reinforced with non-woven metal meshes for electro-dialysis applications

    Article • Separation and Purification Technology, June 2015, Elsevier

    Professor Lingxue Kong

  155. Growth of nano-textured graphene coatings across highly porous stainless steel supports towards corrosion resistant coatings

    Article • Carbon, June 2015, Elsevier

    Professor Lingxue Kong

  156. Functionalized Mesoporous Silica Nanoparticles with Redox-Responsive Short-Chain Gatekeepers for Agrochemical Delivery

    Article • ACS Applied Materials & Interfaces, May 2015, American Chemical Society (ACS)

    Professor Lingxue Kong

  157. Fabrication of high specificity hollow mesoporous silica nanoparticles assisted by Eudragit for targeted drug delivery

    Article • Journal of Colloid and Interface Science, May 2015, Elsevier

    Professor Lingxue Kong

  158. Regulation of HbPIP2;3, a Latex-Abundant Water Transporter, Is Associated with Latex Dilution and Yield in the Rubber Tree (Hevea brasiliensis Muell. Arg.)

    Article • PLoS ONE, April 2015, PLOS

    Professor Lingxue Kong

  159. The High Renaissance Properties of Porous Three Dimensional Graphene Using One Step Reduction and Its Application in Flexible Conductor

    Article • March 2015, World Scientific Pub Co Pte Lt

    Professor Lingxue Kong

  160. A Facile Synthesis of Mesoporous Silica Nanoparticle and its Morphology Manipulation by Varying pH Value

    Article • March 2015, World Scientific Pub Co Pte Lt

    Professor Lingxue Kong

  161. Study on nanocellulose by high pressure homogenization in homogeneous isolation

    Article • Fibers and Polymers, March 2015, Springer Science + Business Media

    Professor Lingxue Kong

  162. Simultaneous polymerization and crosslinking for the synthesis of molecular-level graphene oxide–polyacryl amide–CeOx composites

    Article • Chemical Engineering Journal, March 2015, Elsevier

    Professor Lingxue Kong

  163. Study on LiFe1 − x Sm x PO4/C used as cathode materials for lithium-ion batteries with low Sm component

    Article • Ionics, February 2015, Springer Science + Business Media

    Professor Lingxue Kong

  164. Towards integrated anti-microbial capabilities: Novel bio-fouling resistant membranes by high velocity embedment of silver particles

    Article • Journal of Membrane Science, February 2015, Elsevier

    Professor Lingxue Kong

  165. Latex dilution reaction during the tapping flow course of Hevea brasiliensis and the effect of Ethrel stimulation

    Article • Brazilian Journal of Botany, January 2015, Springer Science + Business Media

    Professor Lingxue Kong

  166. Silver nanoparticles prepared by gamma irradiation across metal–organic framework templates

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Professor Lingxue Kong

  167. Biotemplated fabrication of a novel hierarchical porous C/LiFePO4/C composite for Li-ion batteries

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Professor Lingxue Kong

  168. Mechanism of a green graphene oxide reduction with reusable potassium carbonate

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Professor Lingxue Kong

  169. Graphene networks and their influence on free-volume properties of graphene–epoxidized natural rubber composites with a segregated structure: rheological and positron annihilation studies

    Article • Physical Chemistry Chemical Physics, January 2015, Royal Society of Chemistry

    Professor Lingxue Kong

  170. In situ synthesis of natural rubber latex-supported gold nanoparticles for flexible SERS substrates

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Professor Lingxue Kong

  171. The control of epidermal growth factor grafted on mesoporous silica nanoparticles for targeted delivery

    Article • Journal of Materials Chemistry B, January 2015, Royal Society of Chemistry

    Professor Lingxue Kong

  172. Overcoming acquired drug resistance in colorectal cancer cells by targeted delivery of 5-FU with EGF grafted hollow mesoporous silica nanoparticles

    Article • Nanoscale, January 2015, Royal Society of Chemistry

    Professor Lingxue Kong

  173. Preparation of size-selective Mn3O4 hexagonal nanoplates with superior electrochemical properties for pseudocapacitors

    Article • Physical Chemistry Chemical Physics, January 2015, Royal Society of Chemistry

    Professor Lingxue Kong

  174. Formation of defects in the graphite oxidization process: a positron study

    Article • RSC Advances, January 2015, Royal Society of Chemistry

    Professor Lingxue Kong

  175. Lab-on-Chip Devices for Biodefense Applications

    Article • January 2015, Springer Science + Business Media

    Professor Lingxue Kong

  176. Lab-on-Chip Devices for Immunoassays

    Article • January 2015, Springer Science + Business Media

    Professor Lingxue Kong

  177. Chemical Vapor Deposition for Film Deposition

    Article • January 2015, Springer Science + Business Media

    Professor Lingxue Kong

  178. Functionalization of Hollow Mesoporous Silica Nanoparticles for Improved 5-FU Loading

    Article • Journal of Nanomaterials, January 2015, Hindawi Publishing Corporation

    Professor Lingxue Kong

  179. Superior Performance of Aptamer in Tumor Penetration over Antibody: Implication of Aptamer-Based Theranostics in Solid Tumors

    Article • Theranostics, January 2015, Ivyspring International Publisher

    Professor Lingxue Kong

  180. EpCAM Aptamer-mediated Survivin Silencing Sensitized Cancer Stem Cells to Doxorubicin in a Breast Cancer Model

    Article • Theranostics, January 2015, Ivyspring International Publisher

    Professor Lingxue Kong

  181. Nucleic Acid Aptamer-Guided Cancer Therapeutics and Diagnostics: the Next Generation of Cancer Medicine

    Article • Theranostics, January 2015, Ivyspring International Publisher

    Professor Lingxue Kong

  182. Molecular Dynamics Simulation of Heat Transfer during Quenching in CNT Nanofluids

    Article • Materials Performance and Characterization, December 2014, ASTM International

    Professor Lingxue Kong

  183. Effect of magnetic treatment on microstructure and cycle performance of LiFePO4/C cathode material

    Article • Materials Letters, December 2014, Elsevier

    Professor Lingxue Kong

  184. Molecular-level dispersion of graphene into epoxidized natural rubber: Morphology, interfacial interaction and mechanical reinforcement

    Article • Polymer, December 2014, Elsevier

    Professor Lingxue Kong

  185. Tuning the grade of graphene: Gamma ray irradiation of free-standing graphene oxide films in gaseous phase

    Article • Applied Surface Science, December 2014, Elsevier

    Professor Lingxue Kong

  186. Synthesis of single-crystalline LiFePO4 with rhombus-like morphology

    Article • Ionics, November 2014, Springer Science + Business Media

    Professor Lingxue Kong

  187. Sparse representation with multi-manifold analysis for texture classification from few training images

    Article • Image and Vision Computing, November 2014, Elsevier

    Professor Lingxue Kong

  188. Qualitative spectroscopic characterization of the matrix–silane coupling agent interface across metal fibre reinforced ion exchange resin composite membranes

    Article • Vibrational Spectroscopy, November 2014, Elsevier

    Professor Lingxue Kong

  189. Homogeneous isolation of nanocelluloses by controlling the shearing force and pressure in microenvironment

    Article • Carbohydrate Polymers, November 2014, Elsevier

    Professor Lingxue Kong

  190. Impact of the De-Alloying Kinetics and Alloy Microstructure on the Final Morphology of De-Alloyed Meso-Porous Metal Films

    Article • Nanomaterials, October 2014, MDPI AG

    Professor Lingxue Kong

  191. Microencapsulation of coupled folate and chitosan nanoparticles for targeted delivery of combination drugs to colon

    Article • Journal of Microencapsulation, September 2014, Taylor & Francis

    Professor Lingxue Kong

  192. New insight into non-isothermal crystallization of PVA–graphene composites

    Article • Physical Chemistry Chemical Physics, September 2014, Royal Society of Chemistry

    Professor Lingxue Kong

  193. Novel Ultrathin Nanoflake Assembled Porous MnO2/Carbon Strip Microspheres for Superior Pseudocapacitors

    Article • ACS Sustainable Chemistry & Engineering, August 2014, American Chemical Society (ACS)

    Professor Lingxue Kong

  194. Fabrication of Meso-Porous Sintered Metal Thin Films by Selective Etching of Silica Based Sacrificial Template

    Article • Nanomaterials, August 2014, MDPI AG

    Professor Lingxue Kong

  195. Fabrication of conductive elastic nanocomposites via framing intact interconnected graphene networks

    Article • Composites Science and Technology, August 2014, Elsevier

    Professor Lingxue Kong

  196. Preparation of pH- and salinity-responsive cellulose copolymer in ionic liquid

    Article • Journal of Polymer Research, July 2014, Springer Science + Business Media

    Professor Lingxue Kong

  197. Improved Efficacy and Reduced Toxicity of Doxorubicin Encapsulated in Sulfatide-Containing Nanoliposome in a Glioma Model

    Article • PLoS ONE, July 2014, PLOS

    Professor Lingxue Kong

  198. Characterization of structure and energy of TixCy cluster at early formation stage in iron matrix by molecular dynamics

    Article • Chemical Physics Letters, July 2014, Elsevier

    Professor Lingxue Kong

  199. Variation of phloem turgor pressure in Hevea brasiliensis: An implication for latex yield and tapping system optimization

    Article • Industrial Crops and Products, July 2014, Elsevier

    Professor Lingxue Kong

  200. KINETIC MODEL FOR THERMAL DEHYDROCHLORINATION OF CHLORINATED NATURAL RUBBER WITH DIFFERENT CHLORINE CONTENT

    Article • Rubber Chemistry and Technology, June 2014, Rubber Division, ACS

    Professor Lingxue Kong

  201. Uptake and cellular distribution, in four plant species, of fluorescently labeled mesoporous silica nanoparticles

    Article • Plant Cell Reports, May 2014, Springer Science + Business Media

    Professor Lingxue Kong

  202. Development of drug-loaded chitosan–vanillin nanoparticles and its cytotoxicity against HT-29 cells

    Article • Drug Delivery, April 2014, Taylor & Francis

    Professor Lingxue Kong

  203. Electrically conductive graphene-filled polymer composites with well organized three-dimensional microstructure

    Article • Materials Letters, April 2014, Elsevier

    Professor Lingxue Kong

  204. Inflammation and cancer stem cells

    Article • Cancer Letters, April 2014, Elsevier

    Professor Lingxue Kong, Professor (Dr.) Santanu Bhattacharya

  205. Single step preparation of meso-porous and reduced graphene oxide by gamma-ray irradiation in gaseous phase

    Article • Carbon, April 2014, Elsevier

    Professor Lingxue Kong

  206. Surface Modification and Properties Analysis of Shell Powder with Sodium Stearate Surface Modifier

    Article • Advanced Materials Research, April 2014, Trans Tech Publications

    Professor Lingxue Kong

  207. Real-time measurement of phloem turgor pressure in Hevea brasiliensis with a modified cell pressure probe

    Article • Botanical Studies, February 2014, Springer Science + Business Media

    Professor Lingxue Kong

  208. Development and evaluation of novel flavour microcapsules containing vanilla oil using complex coacervation approach

    Article • Food Chemistry, February 2014, Elsevier

    Professor Lingxue Kong

  209. Molecular Dynamics Modelling of Diffusional Formation of Titanium Carbide Clusters in Iron Matrix

    Article • January 2014, Wiley

    Professor Lingxue Kong

  210. Molecular dynamics study of response of liquid N,N-dimethylformamide to externally applied electric field using a polarizable force field

    Article • The Journal of Chemical Physics, January 2014, American Institute of Physics

    Professor Lingxue Kong

  211. Targeted delivery of 5-fluorouracil to HT-29 cells using high efficient folic acid-conjugated nanoparticles

    Article • Drug Delivery, January 2014, Taylor & Francis

    Professor Lingxue Kong

  212. Retention of the original LLC structure in a cross-linked poly(ethylene glycol) diacrylate hydrogel with reinforcement from a silica network

    Article • Soft Matter, January 2014, Royal Society of Chemistry

    Professor Lingxue Kong

  213. Lab-on-Chip Devices for Immunoassays

    Article • January 2014, Springer Science + Business Media

    Professor Lingxue Kong

  214. Chemical Vapor Deposition for Film Deposition

    Article • January 2014, Springer Science + Business Media

    Professor Lingxue Kong

  215. Lab-on-Chip Devices for Biodefense Applications

    Article • January 2014, Springer Science + Business Media

    Professor Lingxue Kong

  216. Fabrication of Polycarbonate Microfluidic Devices Using a Focusing and Defocusing Methods of CO2 Laser System

    Article • Advanced Science Engineering and Medicine, January 2014, American Scientific Publishers

    Professor Lingxue Kong

  217. Molecular Dynamics Modelling of Diffusional Formation of Titanium Carbide Clusters in Iron Matrix

    Article • January 2014, Springer Science + Business Media

    Professor Lingxue Kong

  218. Scale invariant texture classification via sparse representation

    Article • Neurocomputing, December 2013, Elsevier

    Professor Lingxue Kong

  219. CHLORINATION REACTION KINETICS OF THE LOW-CONCENTRATION NATURAL RUBBER LATEX

    Article • Rubber Chemistry and Technology, December 2013, Rubber Division, ACS

    Professor Lingxue Kong

  220. Characterization of carbon nanotube webs and yarns with small angle X-ray scattering: Revealing the yarn twist and inter-nanotube interactions and alignment

    Article • Carbon, November 2013, Elsevier

    Professor Lingxue Kong

  221. Non-Isothermal Crystallization Kinetics of Polyvinyl Alcohol-Graphene Oxide Composites

    Article • Applied Mechanics and Materials, November 2013, Trans Tech Publications

    Professor Lingxue Kong

  222. Aptamers as Theranostic Agents: Modifications, Serum Stability and Functionalisation

    Article • Sensors, October 2013, MDPI AG

    Professor Lingxue Kong, Professor (Dr.) Santanu Bhattacharya

  223. CFD modeling of hydrodynamic characteristics of slug bubble flow in a flat sheet membrane bioreactor

    Article • Journal of Membrane Science, October 2013, Elsevier

    Professor Lingxue Kong

  224. Ultrasound-assisted tapping of latex from Para rubber tree Hevea brasiliensis

    Article • Industrial Crops and Products, October 2013, Elsevier

    Professor Lingxue Kong

  225. Effect of Ultrasonic Wave on Latex Production and Quality of Rubber Tree

    Article • Applied Mechanics and Materials, October 2013, Trans Tech Publications

    Professor Lingxue Kong

  226. Preparation and characterization of natural rubber/silica nanocomposites using rule of similarity in latex

    Article • Journal of Wuhan University of Technology-Mater Sci Ed, October 2013, Springer Science + Business Media

    Professor Lingxue Kong

  227. Functionalization of polyvinyl alcohol hydrogels with graphene oxide for potential dye removal

    Article • Journal of Applied Polymer Science, September 2013, Wiley

    Professor Lingxue Kong

  228. Sparse representation of local spatial-temporal features with dimensionality reduction for motion recognition

    Article • Neurocomputing, September 2013, Elsevier

    Professor Lingxue Kong

  229. Three‐dimensional pore structure analysis of polycaprolactone nano‐microfibrous scaffolds using theoretical and experimental approaches

    Article • Journal of Biomedical Materials Research Part A, August 2013, Wiley

    Professor Lingxue Kong, Professor Masoud Latifi

  230. Preparation and Characterization of Novel Chitosan-Based Microcapsule Containing Patchouli Oil

    Article • Journal of Biobased Materials and Bioenergy, August 2013, American Scientific Publishers

    Professor Lingxue Kong

  231. Composite yarns fabricated from continuous needleless electrospun nanofibers

    Article • Polymer Engineering & Science, July 2013, Wiley

    Professor Lingxue Kong

  232. Thermal degradation kinetics and mechanism of epoxidized natural rubber

    Article • Journal of Polymer Engineering, July 2013, De Gruyter

    Professor Lingxue Kong

  233. Mesoporous silica nanoparticles as a biomolecule delivery vehicle in plants

    Article • Journal of Nanoparticle Research, May 2013, Springer Science + Business Media

    Professor Lingxue Kong

  234. Chitosan-Modified PLGA Nanoparticles with Versatile Surface for Improved Drug Delivery

    Article • AAPS PharmSciTech, March 2013, American Association of Pharmaceutical Scientists (AAPS)

    Professor Lingxue Kong

  235. RNA aptamers targeting cancer stem cell marker CD133

    Article • Cancer Letters, March 2013, Elsevier

    Professor Lingxue Kong

  236. A theoretical analysis and prediction of pore size and pore size distribution in electrospun multilayer nanofibrous materials

    Article • Journal of Biomedical Materials Research Part A, February 2013, Wiley

    Professor Lingxue Kong, Professor Masoud Latifi

  237. The fabrication and surface functionalization of porous metal frameworks – a review

    Article • Journal of Materials Chemistry A, January 2013, Royal Society of Chemistry

    Professor Lingxue Kong

  238. Homogeneous Isolation of Nanocellulose from Cotton Cellulose by High Pressure Homogenization

    Article • Journal of Materials Science and Chemical Engineering, January 2013, Scientific Research Publishing, Inc,

    Professor Lingxue Kong

  239. Seeded growth of ZIF-8 on the surface of carbon nanotubes towards self-supporting gas separation membranes

    Article • Journal of Materials Chemistry A, January 2013, Royal Society of Chemistry

    Professor Lingxue Kong

  240. Ammonium‐assisted green fabrication of graphene/natural rubber latex composite

    Article • Polymer Composites, December 2012, Wiley

    Professor Lingxue Kong

  241. The effect of concentrations and properties of phenanthrene, pyrene, and benzo(a)pyrene on desorption in contaminated soil aged for 1 year

    Article • Journal of Soils and Sediments, December 2012, Springer Science + Business Media

    Professor Lingxue Kong

  242. Photocatalytic degradation of phenanthrene on soil surfaces in the presence of nanometer anatase TiO2 under UV-light

    Article • Journal of Environmental Sciences, December 2012, Elsevier

    Professor Lingxue Kong

  243. Microencapsulation of nanoparticles with enhanced drug loading for pH-sensitive oral drug delivery for the treatment of colon cancer

    Article • Journal of Applied Polymer Science, November 2012, Wiley

    Professor Lingxue Kong

  244. Homogeneous isolation of nanocellulose from sugarcane bagasse by high pressure homogenization

    Article • Carbohydrate Polymers, November 2012, Elsevier

    Professor Lingxue Kong

  245. Experimental verification of theoretical prediction of fiber to fiber contacts in electrospun multilayer nano-microfibrous assemblies: Effect of fiber diameter and network porosity

    Article • Journal of Industrial Textiles, October 2012, SAGE Publications

    Professor Lingxue Kong

  246. The application of Cd Se/ZnS quantum dots and confocal laser scanning microscopy for three-dimensional imaging of nanofibrous structures

    Article • Journal of Industrial Textiles, October 2012, SAGE Publications

    Professor Lingxue Kong

  247. A theoretical analysis for fiber contacts in multilayer nanofibrous assemblies

    Article • Textile Research Journal, September 2012, SAGE Publications

    Professor Lingxue Kong

  248. Three‐dimensional pore structure analysis of Nano/Microfibrous scaffolds using confocal laser scanning microscopy

    Article • Journal of Biomedical Materials Research Part A, September 2012, Wiley

    Professor Lingxue Kong, Professor Masoud Latifi

  249. Degradation of pyrene by immobilized microorganisms in saline-alkaline soil

    Article • Journal of Environmental Sciences, September 2012, Elsevier

    Professor Lingxue Kong

  250. Computational Simulation of the Influence of Inert Particles on Incomplete Combustion of Methane at a Low Air Factor

    Article • Materials Performance and Characterization, September 2012, ASTM International

    Professor Lingxue Kong

  251. Atomic interaction of functionalized carbon nanotube-based nanofluids with a heating surface and its effect on heat transfer

    Article • International Journal of Heat and Mass Transfer, September 2012, Elsevier

    Professor Lingxue Kong

  252. Design of a miniature UHF PIFA for DBS implants

    Article • July 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Lingxue Kong

  253. Generative models for automatic recognition of human daily activities from a single triaxial accelerometer

    Article • June 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Lingxue Kong

  254. Multi-scale local pattern co-occurrence matrix for textural image classification

    Article • June 2012, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Lingxue Kong

  255. Evolution of moisture management behavior of high-wicking 3D warp knitted spacer fabrics

    Article • Fibers and Polymers, April 2012, Springer Science + Business Media

    Professor Lingxue Kong

  256. Study and Simulation of the Model about High-Speed Maglev Drive Needles

    Article • Advanced Materials Research, April 2012, Trans Tech Publications

    Professor Lingxue Kong

  257. Rapid multi sample DNA amplification using rotary-linear polymerase chain reaction device (PCRDisc)

    Article • Biomicrofluidics, March 2012, American Institute of Physics

    Professor Lingxue Kong

  258. Natural rubber/multiwalled carbon nanotube composites developed with a combined self-assembly and latex compounding technique

    Article • Journal of Applied Polymer Science, February 2012, Wiley

    Professor Lingxue Kong

  259. Preparation of Nanoparticles by Crosslinking Folate Conjugated Chitosan with Vanillin and its Characterization

    Article • Advanced Materials Research, February 2012, Trans Tech Publications

    Professor Lingxue Kong

  260. Structure retention in cross-linked poly(ethylene glycol) diacrylate hydrogel templated from a hexagonal lyotropic liquid crystal by controlling the surface tension

    Article • Soft Matter, January 2012, Royal Society of Chemistry

    Professor Lingxue Kong

  261. Reinforcement of Natural Rubber with Core-Shell Structure Silica-Poly(Methyl Methacrylate) Nanoparticles

    Article • Journal of Nanomaterials, January 2012, Hindawi Publishing Corporation

    Professor Lingxue Kong

  262. Driver verification based on handgrip recognition on steering wheel

    Article • October 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Lingxue Kong

  263. Structure and properties of self-assembled narural rubber/multi-walled carbon nanotube composites

    Article • Journal of Wuhan University of Technology-Mater Sci Ed, October 2011, Springer Science + Business Media

    Professor Lingxue Kong

  264. Involvement of rootstocks and their hydraulic conductance in the drought resistance of grafted rubber trees

    Article • AFRICAN JOURNAL OF BIOTECHNOLOGY, September 2011, Academic Journals

    Professor Lingxue Kong

  265. Transport properties of multi-layer fabric based on electrospun nanofiber mats as a breathable barrier textile material

    Article • Textile Research Journal, September 2011, SAGE Publications

    Professor Lingxue Kong

  266. Formulation of Vanillin Cross-Linked Chitosan Nanoparticles and its Characterization

    Article • Advanced Materials Research, September 2011, Trans Tech Publications

    Professor Lingxue Kong

  267. Driver Recognition Based on Dynamic Handgrip Pattern on Steeling Wheel

    Article • July 2011, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Lingxue Kong

  268. Development of chitosan nanoparticles as drug delivery systems for 5-fluorouracil and leucovorin blends

    Article • Carbohydrate Polymers, June 2011, Elsevier

    Professor Lingxue Kong

  269. Integral Approach and Numerical Improvement to Calculate Carbon Concentration Profiles in Carburising

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Professor Lingxue Kong

  270. Particle Dynamics and Heat Transfer at Workpiece Surface in Heat Treatment Fluidised Beds

    Article • Advanced Materials Research, June 2011, Trans Tech Publications

    Professor Lingxue Kong

  271. Structure and Thermal Stability of Natural Rubber Reinforced with In Situ Generated Zinc Sorbate

    Article • Advanced Materials Research, May 2011, Trans Tech Publications

    Professor Lingxue Kong

  272. Synthesis and characterization of folate conjugated chitosan and cellular uptake of its nanoparticles in HT-29 cells

    Article • Carbohydrate Research, May 2011, Elsevier

    Professor Lingxue Kong

  273. Integrated fluid-thermal-structural numerical analysis for the quenching of metallic components

    Article • Journal of Shanghai Jiaotong University (Science), April 2011, Springer Science + Business Media

    Professor Lingxue Kong

  274. Development of Ligand Incorporated Chitosan Nanoparticles for the Selective Delivery of 5-Fluorouracil to Colon

    Article • Advanced Materials Research, February 2011, Trans Tech Publications

    Professor Lingxue Kong

  275. Directional Gaussian Filter-based LBP Descriptor For Textural Image Classification

    Article • Procedia Engineering, January 2011, Elsevier

    Professor Lingxue Kong

  276. A Head Mountable Deep Brain Stimulation Device for Laboratory Animals

    Article • January 2011, Springer Science + Business Media

    Professor Lingxue Kong

  277. Nanostructures generated from photopolymerization of poly(ethylene glycol) diacrylate templated from hexagonal lyotropic liquid crystals

    Article • Journal of Applied Polymer Science, December 2010, Wiley

    Professor Lingxue Kong

  278. Self-assembled natural rubber/multi-walled carbon nanotube composites using latex compounding techniques

    Article • Carbon, December 2010, Elsevier

    Professor Lingxue Kong

  279. Formulation optimization for high drug loading colonic drug delivery carrier

    Article • October 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Lingxue Kong

  280. Amplification of SPPS150 andSalmonella typhiDNA with a high throughput oscillating flow polymerase chain reaction device

    Article • Biomicrofluidics, June 2010, American Institute of Physics

    Professor Lingxue Kong

  281. Simultaneous Incorporation of 5-Fluorouracil and Leucovorin into Chitosan Nanoparticle as Drug Carrier and Its Characterization

    Article • Materials Science Forum, June 2010, Trans Tech Publications

    Professor Lingxue Kong

  282. Physichemical property and morphology of 5-fluorouracil loaded chitosan nanoparticles

    Article • February 2010, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Lingxue Kong

  283. 3-Dimensional characterization of membrane with nanoporous structure using TEM tomography and image analysis

    Article • Desalination, January 2010, Elsevier

    Hiroshi Jinnai, Professor Lingxue Kong

  284. Studies on the properties and the thermal decomposition kinetics of natural rubber prepared with calcium chloride

    Article • e-Polymers, January 2010, De Gruyter

    Professor Lingxue Kong

  285. Development of a contact probe incorporating a Bragg grating strain sensor for nano coordinate measuring machines

    Article • Measurement Science and Technology, July 2009, Institute of Physics Publishing

    Professor Lingxue Kong

  286. Measurement of the mass transfer coefficient at workpiece surfaces in heat treatment furnaces

    Article • Journal of Materials Processing Technology, January 2009, Elsevier

    Professor Lingxue Kong

  287. Characterization of membranes with X-ray ultramicroscopy

    Article • Desalination, January 2009, Elsevier

    Professor Lingxue Kong

  288. Improved 3D Thinning Algorithms for Skeleton Extraction

    Article • January 2009, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Lingxue Kong

  289. The Effects of Working Fluid on the Heat Transport Capacity of a Microheat Pipe

    Article • Journal of Heat Transfer, January 2009, ASME International

    Professor Lingxue Kong

  290. Natural rubber nanocomposite reinforced with nano silica

    Article • Polymer Engineering & Science, September 2008, Wiley

    Professor Lingxue Kong

  291. Micro- and nano-characterization of membrane materials

    Article • Journal of the Chinese Institute of Chemical Engineers, July 2008, Elsevier

    Professor Lingxue Kong

  292. Calculation of effective pore diameters in porous filtration membranes with image analysis

    Article • Robotics and Computer-Integrated Manufacturing, June 2008, Elsevier

    Professor Lingxue Kong

  293. Integrated optimization system for high pressure die casting processes

    Article • Journal of Materials Processing Technology, May 2008, Elsevier

    Professor Lingxue Kong

  294. Self-assembled natural rubber/silica nanocomposites: Its preparation and characterization

    Article • Composites Science and Technology, December 2007, Elsevier

    Professor Lingxue Kong

  295. Alternating heat transfer between objects of large geometrical difference

    Article • Advances in Engineering Software, November 2007, Elsevier

    Professor Lingxue Kong

  296. Computational simulation of gas flow and heat transfer near an immersed object in fluidized beds

    Article • Advances in Engineering Software, November 2007, Elsevier

    Professor Lingxue Kong

  297. A CFD-aided experimental study on bending of micro glass pipettes

    Article • Journal of Mechanical Science and Technology, October 2007, Springer Science + Business Media

    Professor Lingxue Kong

  298. Finite element simulation of deformation processes of micro-components

    Article • Journal of Mechanical Science and Technology, October 2007, Springer Science + Business Media

    Professor Lingxue Kong

  299. A potential application of a piezoelectric atomiser for ophthalmic drug delivery

    Article • Applied Bionics and Biomechanics, July 2007, Crossref

    Professor Lingxue Kong

  300. A thermal degradation mechanism of polyvinyl alcohol/silica nanocomposites

    Article • Polymer Degradation and Stability, June 2007, Elsevier

    Professor Lingxue Kong

  301. An advanced virtual program in engineering education for research and teaching excellence

    Article • International Journal of Mechanical Engineering Education, April 2007, SAGE Publications

    Professor Lingxue Kong

  302. Morphology of self-assembled polyvinyl alcohol/Silica nanocomposites studied with atomic force microscopy

    Article • Polymer Bulletin, March 2007, Springer Science + Business Media

    Professor Lingxue Kong

  303. A Potential Application of a Piezoelectric Atomiser for Ophthalmic Drug Delivery

    Article • Applied Bionics and Biomechanics, January 2007, Hindawi Publishing Corporation

    Professor Lingxue Kong

  304. Design and degradation modelling through artificial neural networks

    Article • International Journal of Manufacturing Research, January 2007, Inderscience Publishers

    Professor Lingxue Kong

  305. Calibration of wavelength shift for a fibre Bragg grating using a single mode laser source

    Article • December 2006, SPIE

    Professor Lingxue Kong

  306. Computational thermal analysis of a continuous flow micro polymerase chain reaction (PCR) chip

    Article • December 2006, SPIE

    Professor Lingxue Kong

  307. Development of Positioning Jig for Glass Capillary Bending Mechanism

    Article • December 2006, Institute of Electrical & Electronics Engineers (IEEE)

    Professor Lingxue Kong

  308. Poly(vinyl alcohol)/Silica Nanocomposites: Morphology and Thermal Degradation Kinetics

    Article • Journal of Nanoscience and Nanotechnology, December 2006, American Scientific Publishers

    Professor Lingxue Kong

  309. A high-sensitivity optical touch trigger probe for down scaled 3D CMMs

    Article • November 2006, SPIE

    Professor Lingxue Kong

  310. Local total and radiative heat-transfer coefficients during the heat treatment of a workpiece in a fluidised bed

    Article • Applied Thermal Engineering, October 2006, Elsevier

    Professor Lingxue Kong

  311. Management of Cardiovascular Diseases with Micro Systems and Nanotechnology

    Article • Journal of Nanoscience and Nanotechnology, September 2006, American Scientific Publishers

    Professor Lingxue Kong

  312. Numerical Analysis of Heat Transfer and the Optimization of Regenerators

    Article • Numerical Heat Transfer Part A Applications, February 2006, Taylor & Francis

    Professor Lingxue Kong

  313. Nanotechnology and its role in the management of periodontal diseases

    Article • Periodontology 2000, February 2006, Wiley

    Professor Lingxue Kong

  314. Thermal Degradation Kinetics and Morphology of Natural Rubber/Silica Nanocomposites

    Article • Journal of Nanoscience and Nanotechnology, February 2006, American Scientific Publishers

    Professor Lingxue Kong

  315. Computational Investigation of a Non-Newtonian Fluid Flow in a Microchannel Using Surface Micro Waves

    Article • January 2006, ASME International

    Professor Lingxue Kong

  316. Preliminary Numerical Modelling of Non-Newtonian Fluid Behaviour Under Surface Microwaves

    Article • January 2006, ASME International

    Professor Lingxue Kong

  317. Thermal Analysis of Inclined Micro Heat Pipes

    Article • Journal of Heat Transfer, January 2006, ASME International

    Professor Lingxue Kong

  318. Design and simulation of an ultrasonic transducer

    Article • December 2005, SPIE

    Professor Lingxue Kong

  319. Finite element analysis of fluid behavior under micro surface waves

    Article • December 2005, SPIE

    Professor Lingxue Kong

  320. Concept design of a novel tactile probe tip for down scaled 3D CMMs

    Article • December 2005, SPIE

    Professor Lingxue Kong

  321. Fabrication of integrated optic fibre tip for micron CMMs touch trigger probe application

    Article • December 2005, SPIE

    Professor Lingxue Kong

  322. Dynamic mechanical analysis of polyvinylalcohol/silica nanocomposite

    Article • Synthetic Metals, September 2005, Elsevier

    Professor Lingxue Kong

  323. Isothermal crystallisation behaviour and kinetics of polyvinylalcohol/silica nanocomposite

    Article • Synthetic Metals, September 2005, Elsevier

    Professor Lingxue Kong

  324. Objective Measurement of Wool Fibre Fineness Using 2-D Gabor Filter

    Article • Research Journal of Textile and Apparel, August 2005, Emerald

    Professor Lingxue Kong

  325. Secondary Flow in a Strong Curved Converging Channel

    Article • Research Journal of Textile and Apparel, August 2005, Emerald

    Professor Lingxue Kong

  326. Non-isothermal crystallisation kinetics of self-assembled polyvinylalcohol/silica nano-composite

    Article • Polymer, February 2005, Elsevier

    Professor Lingxue Kong

  327. Thermal properties and morphology of a poly(vinyl alcohol)/silica nanocomposite prepared with a self-assembled monolayer technique

    Article • Journal of Applied Polymer Science, January 2005, Wiley

    Professor Lingxue Kong

  328. Study on Thermooxidative Degradation of Poly(Vinyl Alcohol)/Silica Nanocomposite Prepared with SAM Technique

    Article • Journal of Metastable and Nanocrystalline Materials, January 2005, Trans Tech Publications

    Professor Lingxue Kong

  329. Development of a Novel Micro-Spray-Assembly Process for Multilayer Ultra-Thin Film Formation

    Article • Journal of Metastable and Nanocrystalline Materials, January 2005, Trans Tech Publications

    Professor Lingxue Kong

  330. Investigation of Nonisothermal Crystallization Behaviors of Poly and Silica Nanocomposites Using Differential Scanning Calorimetry

    Article • Key Engineering Materials, January 2005, Trans Tech Publications

    Professor Lingxue Kong

  331. Experimental investigation and numerical simulation of heat transfer in quenching fluidised beds

    Article • International Journal of Materials and Product Technology, January 2005, Inderscience Publishers

    Professor Lingxue Kong

  332. THE APPLICATION OF SELF-ASSEMBLY MONOLAYER TECHNIQUE INTO FABRICATING MULTILAYER NANOFILM

    Article • International Journal of Nanoscience, August 2004, World Scientific Pub Co Pte Lt

    Professor Lingxue Kong

  333. Influence of the Geometry of an Immersed Steel Workpiece on Mass Transfer Coefficient in a Chemical Heat Treatment Fluidised Bed

    Article • ISIJ International, January 2004, Iron and Steel Institute of Japan

    Professor Lingxue Kong

  334. Development of Bone Graft Using Wire Mesh Solids

    Article • January 2004, ASME International

    Professor Lingxue Kong

  335. Influence of Geometrical Design and Flow Conditions on the Performance of a Microatomiser

    Article • January 2004, ASME International

    Professor Lingxue Kong

  336. Numerical Study of Conduction and Convection Between Immersed Object and Gas Fluidized Bed

    Article • January 2004, ASME International

    Professor Lingxue Kong

  337. Constitutive Modeling of Drawing and Extrusion with Cyclic Torsion

    Article • Key Engineering Materials, January 2003, Trans Tech Publications

    Professor Lingxue Kong

  338. Prediction of Hot Strength of Steels with Advanced Models

    Article • Key Engineering Materials, January 2003, Trans Tech Publications

    Professor Lingxue Kong

  339. Automatic inspection of metallic surface defects using genetic algorithms

    Article • Journal of Materials Processing Technology, September 2002, Elsevier

    Professor Lingxue Kong

  340. Numerical simulation of heat and mass transfer in fluidised bed heat treatment furnaces

    Article • Journal of Materials Processing Technology, September 2002, Elsevier

    Professor Lingxue Kong

  341. On-line tool condition monitoring and control system in forging processes

    Article • Journal of Materials Processing Technology, September 2002, Elsevier

    Professor Lingxue Kong

  342. Feature extraction for animal fiber identification

    Article • July 2002, SPIE

    Professor Lingxue Kong

  343. Intelligent Animal Fiber Classification with Artificial Neural Networks

    Article • Textile Research Journal, July 2002, SAGE Publications

    Professor Lingxue Kong

  344. Image processing and pattern recognition in textiles

    Article • September 2001, SPIE

    Professor Lingxue Kong

  345. Industrial application of thermal image processing and thermal control

    Article • September 2001, SPIE

    Professor Lingxue Kong

  346. Material properties under drawing and extrusion with cyclic torsion

    Article • Materials Science and Engineering A, June 2001, Elsevier

    Professor Lingxue Kong

  347. Viscoplastic behaviour of porous bronzes and irons

    Article • Journal of Materials Processing Technology, June 2001, Elsevier

    Professor Lingxue Kong

  348. Prediction of Stress-Strain Behaviors in Steels Using an Integrated Constitutive, FEM and ANN Model.

    Article • ISIJ International, January 2001, Iron and Steel Institute of Japan

    Professor Lingxue Kong

  349. Identification and Classification of Animal Fibres Using Artificial Neural Networks

    Article • Journal of Textile Engineering, January 2001, The Textile Machinery Society of Japan

    Professor Lingxue Kong

  350. Predicting flow strength of austenitic steels with an IPANN model using different training strategies

    Article • Advances in Engineering Software, December 2000, Elsevier

    Professor Lingxue Kong

  351. Fibre transportation in confined channel with recirculations

    Article • Computers & Structures, November 2000, Elsevier

    Professor Lingxue Kong

  352. Extrapolative prediction of the hot strength of austenitic steels with a combined constitutive and ANN model

    Article • Journal of Materials Processing Technology, May 2000, Elsevier

    Professor Lingxue Kong

  353. Theoretical Investigation of Heat and Moisture Transfer through Porous Textile Materials

    Article • Research Journal of Textile and Apparel, February 2000, Emerald

    Professor Lingxue Kong

  354. Constitutive modelling of extrusion of lead with cyclic torsion

    Article • Materials Science and Engineering A, January 2000, Elsevier

    Professor Lingxue Kong

  355. FEM Simulation of Torsion Tests for Pre-Deformed Lead with Work-Softening

    Article • Key Engineering Materials, January 2000, Trans Tech Publications

    Professor Lingxue Kong

  356. Development of constitutive models for metal forming with cyclic strain softening

    Article • Journal of Materials Processing Technology, May 1999, Elsevier

    Professor Lingxue Kong

  357. The prediction of the hot strength in steels with an integrated phenomenological and artificial neural network model

    Article • Journal of Materials Processing Technology, March 1999, Elsevier

    Professor Lingxue Kong

  358. The Application of Constitutive and Artificial Neural Network Models to Predict the Hot Strength of Steels.

    Article • ISIJ International, January 1999, Iron and Steel Institute of Japan

    Professor Lingxue Kong

  359. Improvement of the Prediction Accuracy and Efficiency of Hot Strength of Austenitic Steels with Optimised ANN Training Schemes

    Article • Metals and Materials, July 1998, Springer Science + Business Media

    Professor Lingxue Kong

  360. The influence of roll speed on the rolling of metal plates

    Article • Metals and Materials, July 1998, Springer Science + Business Media

    Professor Lingxue Kong

  361. Modelling the Effect of Carbon Content on Hot Strength of Steels Using a Modified Artificial Neural Network.

    Article • ISIJ International, January 1998, Iron and Steel Institute of Japan

    Professor Lingxue Kong

  362. Computational Two-Phase Air/Fiber Flow Within Transfer Channels of Rotor Spinning Machines

    Article • Textile Research Journal, April 1997, SAGE Publications

    Professor Lingxue Kong

  363. Two-Dimensional Simulation of Air Flow in the Transfer Channel of Open-End Rotor Spinning Machines

    Article • Textile Research Journal, October 1996, SAGE Publications

    Professor Lingxue Kong

  364. Effects of Fiber Opening on the Uniformity of Rotor Spun Yarns

    Article • Textile Research Journal, January 1996, SAGE Publications

    Professor Lingxue Kong

  365. Lab-on-Chip Devices for Biodefense Applications

    Article • Springer Science + Business Media

    Professor Lingxue Kong

  366. Lab-on-Chip Devices for Immunoassays

    Article • Springer Science + Business Media

    Professor Lingxue Kong

  367. Chemical Vapor Deposition for Film Deposition

    Article • Springer Science + Business Media

    Professor Lingxue Kong

  368. Three Dimensional Analysis of Air Flow in a Curved Converging Channel

    Article • Civil-Comp, Ltd.

    Professor Lingxue Kong

  369. Computational Simulation of the Influence of Moving Solid Particles on Species Diffusion and Chemical Reactions

    Article • Civil-Comp, Ltd.

    Professor Lingxue Kong

  370. Finite Element Analysis of a Polymer to Polymer Wearing Process

    Article • Civil-Comp, Ltd.

    Professor Lingxue Kong

  371. Investigation of a Self-directing Liquid Holder with Computational Fluid Dynamics

    Article • Civil-Comp, Ltd.

    Professor Lingxue Kong

  372. Die temperature monitoring of high pressure die casting

    Article • Institute of Electrical & Electronics Engineers (IEEE)

    Professor Lingxue Kong

  373. Development of an Ann Model Strategy to Improve the Prediction of Flow Strength of Austenitic Steels

    Article • Civil-Comp, Ltd.

    Professor Lingxue Kong

  374. Investigating the Fibre Configuration in Confined Channel Flow with Recirculations

    Article • Civil-Comp, Ltd.

    Professor Lingxue Kong