All Stories

  1. Textile electronics for wearable applications
  2. The design and development of an illuminated polymeric optical fibre (POF) knitted garment
  3. Yarn and fabric properties in a modified ring spinning system considering the effect of the friction surface of the false-twister
  4. Systematic investigation of twist generation and propagation in a modified ring spinning system
  5. Variation of false twist on spinning process stability and resultant yarn properties in a modified ring spinning frame
  6. Properties and performances of fabrics made from bio-based and degradable polylactide acid/poly (hydroxybutyrate- co-hydroxyvalerate) (PLA/PHBV) filament yarns
  7. Dyeing processes of 100% bio-based and degradable polylactide/poly (hydroxybutyrate-co-hydroxyvalerate) textiles
  8. Wrapper Fibers on Low-Twist Worsted Yarns
  9. A New Approach for Readout of Resistive Sensor Arrays for Wearable Electronic Applications
  10. Three-dimensionally deformable, highly stretchable, permeable, durable and washable fabric circuit boards
  11. Holey reduced graphene oxide nanosheets for high performance room temperature gas sensing
  12. Study on horn-shaped polypyrrole prepared by pulse potential
  13. Performance of cotton single yarns and knitted fabrics produced by a 2-step spinning method
  14. Structural analysis of finer cotton yarns produced by conventional and modified ring spinning system
  15. Novel C-rich carbon nitride for room temperature NO2 gas sensors
  16. Strain Sensing Behavior and Its Mechanisms of Electrically Conductive PPy‐Coated Fabric
  17. Flexible pressure sensors for smart protective clothing against impact loading
  18. Novel Erythrocyte-like Graphene Microspheres with High Quality and Mass Production Capability via Electrospray Assisted Self-Assembly
  19. Luminous fabric devices for wearable low-level light therapy
  20. A comparative study of finer conventional and modified cotton yarns and their resultant woven fabrics
  21. Manageable N-doped Graphene for High Performance Oxygen Reduction Reaction
  22. A dynamic measurement system for evaluating dry bio-potential surface electrodes
  23. Salt-assisted direct exfoliation of graphite into high-quality, large-size, few-layer graphene sheets
  24. Performance Evaluation of Surface Biopotential Dry Electrodes based on PSD and EIS
  25. Investigation of carbon black/silicone elastomer/dimethylsilicone oil composites for flexible strain sensors
  26. Deformation analysis and failure modelling of woven composite preform in general bias extension
  27. Edge Structural Stability and Kinetics of Graphene Chemical Vapor Deposition Growth
  28. Polymer Nanostructures Made by Scanning Probe Lithography: Recent Progress in Material Applications
  29. Mechanism of pressure induced baseline shift in bioelectric signals measurement using wearable electrodes
  30. From wearable to aware: Intrinsically conductive electrotextiles for human strain/stress sensing
  31. Textile-structured human body surface biopotential signal acquisition electrode
  32. Measurement of wearable electrode and skin mechanical interaction using displacement and pressure sensors
  33. An investigation of methodology and apparatus to assess twist liveliness of spun yarns
  34. Facile Synthesis of Wide‐Bandgap Fluorinated Graphene Semiconductors
  35. Low‐Voltage‐Driven Sustainable Weightlifting Actuator Based on Polymer–Nanotube Composite
  36. Water‐based amorphous carbon nanotubes filled polymer nanocomposites
  37. Novel fabric pressure sensors: design, fabrication, and characterization
  38. Classification of Bio-potential Surface Electrode based on FKCM and SVM
  39. The Investigation on Photosensitivity of Polymer Optical Fiber
  40. A stretchable knitted interconnect for three-dimensional curvilinear surfaces
  41. A highly sensitive ultraviolet sensor based on a facile in situ solution-grown ZnO nanorod/graphene heterostructure
  42. A Transparent, Flexible, Low‐Temperature, and Solution‐Processible Graphene Composite Electrode
  43. Thin Film Field‐Effect Phototransistors from Bandgap‐Tunable, Solution‐Processed, Few‐Layer Reduced Graphene Oxide Films
  44. A comparative study of cotton knitted fabrics and garments produced by the modified low twist and conventional ring yarns
  45. Synthesis and characterization of layer-aligned poly(vinyl alcohol)/graphene nanocomposites
  46. Well-Dispersed Chitosan/Graphene Oxide Nanocomposites
  47. In-Shoe Plantar Pressure Measurement and Analysis System Based on Fabric Pressure Sensing Array
  48. Interlaced Circuits for Multidirectional Stretchable Electronics
  49. Vapor‐phase polymerization of pyrrole on flexible substrate at low temperature and its application in heat generation
  50. Easy synthesis of carbon nanotubes with polypyrrole nanotubes as the carbon precursor
  51. Biomimetics of Plant Structure in Textile Fabrics for the Improvement of Water Transport Properties
  52. Fabrication of electrically switchable photonic crystals with different structures by using a top-cut hexagon prism
  53. Electrical textile sensors for repeated large deformation: structures and electromechanical properties
  54. Effects of material composition on the superlens frequency of photonic crystals
  55. Preparation of Porous Tin Oxide Nanobelts Using the Electrospinning Technique
  56. Room temperature gas sensing properties of SnO2/multiwall-carbon-nanotube composite nanofibers
  57. Strain sensing behavior of textile structures made of stainless steel continuous filament yarns under uni-axial tensile loading
  58. 3D Tunable Hexagonal Photonic Crystal in the Ultraviolet Range
  59. Carbon nanotube-reinforced polyurethane composite fibers
  60. Facile route to high-density, ordered ZnO nanowire arrays and their photoluminescence properties
  61. Photosensitivity and grating development in trans-4-stilbenemethanol-doped poly(methyl methacrylate) materials
  62. Nano-amorphous (FeAl)1−xZrx alloys prepared by mechanical alloying
  63. Synthesis and characterization of hydrophobic silica nanocomposites
  64. Production and characterization of polymer nanocomposite with aligned single wall carbon nanotubes
  65. Fabrication of UV sensitive single-mode polymeric optical fiber
  66. A novel sensate ‘string’ for large-strain measurement at high temperature
  67. Prediction of Fiber Die Coating Thickness
  68. Ultrasound-induced Functionalization and Solubilization of Carbon Nanotubes for Potential Nanotextiles Applications
  69. Improvement of Organic Light-emitting Devices by Controlling Deposition Temperature and Inclusion of Carbon Nanotubes
  70. Conductive knitted fabric as large-strain gauge under high temperature
  71. Polypyrrole-coated Fabric Strain Sensor with High Sensitivity and Good Stability
  72. Enhanced mechanical properties and morphological characterizations of poly(vinyl alcohol)–carbon nanotube composite films
  73. Modulation of refractive index and thickness of poly(methyl methacrylate) thin films with UV irradiation and heat treatment
  74. Self‐Organizing Alignment of Carbon Nanotubes in Thermoplastic Polyurethane
  75. Sol–Gel‐Processed SiO2/TiO2/Methylcellulose Composite Materials for Optical Waveguides
  76. A simple self-assembly method for colloidal photonic crystals with a large area
  77. Wearable Electronics and Photonics
  78. Wearable electronics and photonics
  79. Wearable photonics based on integrative polymeric photonic fibres
  80. Introduction
  81. Preface
  82. Electromechanical properties of conductive fibres, yarns and fabrics
  83. Optical properties of titanium dioxide nanoparticles/3-(2-benzothiazolyl)-7-N,N-diethylaminocoumarin/polymethyl methacrylate composite films
  84. Superhydrophobic Silica Nanocomposite Coating by a Low‐Temperature Process
  85. Trans-4-stilbenemethanol-doped photosensitive polymer fibers and gratings
  86. Thermal degradation kinetics and lifetime prediction of a luminescent conducting polymer
  87. Measuring the technological development of the textiles and clothing industry in Hong Kong
  88. A simple control algorithm for wide-band channel-power clamped EDFA
  89. Morphology Control and Mechanical Properties of Liquid Crystalline Polymer-Polyamide Composite Fibers
  90. Nerves for smart clothing – optical fibre sensors and their responses
  91. Investigation of Yarn Twist Propagation in Rotor Spinning
  92. Effects of compression-induced birefringence on reflection spectra of fiber Bragg gratings
  93. Possibility of using a coaxial cable as a distributed strain sensor by time domain reflectometry
  94. Smart textile composites integrated with fibre optic sensors
  95. Mechanical properties of fibre Bragg gratings
  96. Smart technology for textiles and clothing – introduction and overview
  97. Smart fibres, fabrics and clothing
  98. Optical responses of FBG sensors under deformations
  99. Torsion measurement by using FBG sensors
  100. Effects of pure bending on the sensing characteristics of fiber Bragg gratings
  101. A Mechanical Model of Yarn Twist Blockage in Rotor Spinning
  102. Temperature independent strain measurement with a fiber grating tapered cavity sensor
  103. Effectiveness and optimization of fiber Bragg grating sensor as embedded strain sensor
  104. Long-period fiber grating bending sensors in laminated composite structures
  105. Tunable chirped fiber Bragg grating embedded in a textile laminated beam for fiber dispersion compensation
  106. A Mechanical Analysis of Yarn Twist Distribution in Frictional Contact Zone.
  107. Reliability of fiber Bragg grating sensors embedded in textile composites
  108. A Mathematical Model for Prediction of Goniophotometric Curves for Single-Jersey Knitted Fabrics.
  109. Mechanical Properties of a Migrating Fiber
  110. The Bending Properties of Multi‐ply Worsted Yarns
  111. Development of braided rope seals for hypersonic engine applications- Flow modeling
  112. Development of braided rope seals for hypersonic engine applications. II - Flow modeling