All Stories

  1. Identification of metabolic phenotypes in childhood obesity by 1H NMR metabolomics of blood plasma
  2. Characterization of the exhaustion profile of activated carbon in industrial rum “filters” based on TGA, TD-GC/MS, colorimetry and NMR relaxometry
  3. Cytoplasmic versus periplasmic expression of site-specifically and bioorthogonally functionalized nanobodies using expressed protein ligation
  4. Physicochemical characterizations of functional hybrid liposomal nanocarriers formed using photo-sensitive lipids
  5. Spectroscopic Investigation of the Formation and Disruption of Hydrogen Bonds in Pharmaceutical Semicrystalline Dispersions
  6. Controlling the Release of Indomethacin from Glass Solutions Layered with a Rate Controlling Membrane Using Fluid-Bed Processing. Part 2: The Influence of Formulation Parameters on Drug Release
  7. Metabolic phenotyping of human plasma by 1 H-NMR at high and medium magnetic field strengths: a case study for lung cancer
  8. Designing Small Molecule Organic Solar Cells with High Open-Circuit Voltage
  9. In situ monitoring and optimization of CuAAC-mediated protein functionalization of biosurfaces
  10. A detailed investigation of the microwave assisted phenylphosphonic acid modification of P25 TiO2
  11. Binding modes of phosphonic acid derivatives adsorbed on TiO2 surfaces: Assignments of experimental IR and NMR spectra based on DFT/PBC calculations
  12. Elucidating Batch-to-Batch Variation Caused by Homocoupled Side Products in Solution-Processable Organic Solar Cells
  13. Revealing the influence of the solvent in combination with temperature, concentration and pH on the modification of TiO2 with 3PA
  14. Stearic acid and high molecular weight PEO as matrix for the highly water soluble metoprolol tartrate in continuous twin-screw melt granulation
  15. Fully quantitative description of hybrid TiO2 nanoparticles by means of solid state 31P NMR
  16. Studies on the Alkali–Silica Reaction Rim in a Simplified Calcium–Alkali–Silicate System
  17. Enhanced Biosensor Platforms for Detecting the Atherosclerotic Biomarker VCAM1 Based on Bioconjugation with Uniformly Oriented VCAM1-Targeting Nanobodies
  18. Detection of Lung Cancer through Metabolic Changes Measured in Blood Plasma
  19. Corrigendum to “Novel cross-linked polystyrenes with large space network as tailor-made catalyst supports for sustainable media” [Eur. Polym. J. 73 (2015) 391–401]
  20. The impact of hot-melt extrusion on the tableting behaviour of polyvinyl alcohol
  21. Novel cross-linked polystyrenes with large space network as tailor-made catalyst supports for sustainable media
  22. Metabolic phenotyping of human blood plasma: a powerful tool to discriminate between cancer types?
  23. An efficient protocol towards site-specifically clickable nanobodies in high yield: cytoplasmic expression inEscherichia colicombined with intein-mediated protein ligation
  24. Macromol. Rapid Commun. 16/2015
  25. Photoinduced Acrylate Polymerization: Unexpected Reduction in Chain Branching
  26. Influence of preanalytical sampling conditions on the 1H NMR metabolic profile of human blood plasma and introduction of the Standard PREanalytical Code used in biobanking
  27. Chemical Composition of an Aqueous Oxalato-/Citrato-VO2+Solution as Determinant for Vanadium Oxide Phase Formation
  28. Synthesis of sequence-defined acrylate oligomers via photo-induced copper-mediated radical monomer insertions
  29. Interfacial thiol–isocyanate reactions for functional nanocarriers: a facile route towards tunable morphologies and hydrophilic payload encapsulation
  30. Synthesis, characterization and catalytic activity of novel large network polystyrene-immobilized organic bases
  31. Increasing the Solubility Limit for Tetrahedral Aluminium in ZnO:Al Nanorods by Variation in Synthesis Parameters
  32. Implantaten en hun succes na bestraling
  33. Factors Influencing the Conductivity of Aqueous Sol(ution)–Gel-Processed Al-Doped ZnO Films
  34. Development and characterization of mucoadhesive chitosan films for ophthalmic delivery of cyclosporine A
  35. 1631PPROGNOSTIC VALUE OF TOTAL LESION GLYCOLYSIS AND METABOLIC TUMOR VOLUME IN NON-SMALL CELL LUNG CANCER
  36. 1168PVALIDATION OF 1H-NMR-BASED METABOLOMICS AS A TOOL TO DETECT LUNG CANCER IN HUMAN BLOOD PLASMA
  37. Electronic Structure of the Positive Radical of 13C-Labeled Poly(3-Octylthienylene Vinylene) Polymer
  38. Gas Permeability Properties of Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)
  39. Phenotyping human blood plasma by 1H-NMR: a robust protocol based on metabolite spiking and its evaluation in breast cancer
  40. Formulation of itraconazole nanococrystals and evaluation of their bioavailability in dogs
  41. Organic solvent nanofiltration with Grignard functionalised ceramic nanofiltration membranes
  42. Electronic structure of positive and negative polarons in functionalized dithienylthiazolo[5,4-d]thiazoles: a combined EPR and DFT study
  43. Direct arylation as a versatile tool towards thiazolo[5,4-d]thiazole-based semiconducting materials
  44. Aqueous citrato-oxovanadate(iv) precursor solutions for VO2: synthesis, spectroscopic investigation and thermal analysis
  45. Protein Engineering For Directed Immobilization
  46. Structural modifications of polymethacrylates: Impact on thermal behavior and release characteristics of glassy solid solutions
  47. MC13-0032 H-NMR-spectroscopy based metabolomics as a tool to detect lung cancer via a simple blood sample
  48. Prilling of fatty acids as a continuous process for the development of controlled release multiparticulate dosage forms
  49. Actuated Conformational Switching in a Single Crystal of a Homodithiacalix[4]arene
  50. Actuated Conformational Switching in a Single Crystal of a Homodithiacalix[4]arene
  51. An environment friendly wet strip process for 193nm lithography patterning in BEOL applications
  52. Comparative Kinetic Monte Carlo study of the Sulfinyl and Dithiocarbamate Precursor Route toward Highly Regioregular MDMO‐PPV
  53. Reaction of 4H-cyclopenta[2,1-b:3,4-b′]dithiophenes with NBS—a route toward 2H-cyclopenta[2,1-b:3,4-b′]dithiophene-2,6(4H)-diones
  54. Trivalent organophosphorus reagent induced pinacol rearrangement of 4H-cyclopenta[2,1-b:3,4-b′]dithiophen-4-one
  55. V6O13films by control of the oxidation state from aqueous precursor to crystalline phase
  56. A new method to graft titania using Grignard reagents
  57. Synthesis of sequence controlled acrylate oligomers via consecutive RAFT monomer additions
  58. Relation between synthesis conditions, dopant position and charge carriers in aluminium-doped ZnO nanoparticles
  59. Solid State Solubility of Miconazole in Poly[(ethylene glycol)-g-vinyl alcohol] Using Hot-Melt Extrusion
  60. Functionalized Dithienylthiazolo[5,4‐d]thiazoles For Solution‐Processable Organic Field‐Effect Transistors
  61. In-line NIR spectroscopy for the understanding of polymer–drug interaction during pharmaceutical hot-melt extrusion
  62. Combined experimental-theoretical NMR study on 2,5-bis(5-aryl-3-hexylthiophen-2-yl)-thiazolo[5,4-d]thiazole derivatives for printable electronics
  63. Crosslinked poly[1-(trimethylsilyl)-1-propyne] membranes: Characterization and pervaporation of aqueous tetrahydrofuran mixtures
  64. Charge transfer in the weak driving force limit in blends of MDMO-PPV and dithienylthiazolo[5,4-d]thiazoles towards organic photovoltaics with high VOC
  65. Synthesis of poly(p-phenylene vinylene) materials via the precursor routes
  66. Influence of octanedithiol on the nanomorphology of PCPDTBT:PCBM blends studied by solid-state NMR
  67. Influence of the processing solvent on the photoactive layer nanomorphology of P3HT/PC60BM solar cells
  68. Fingerprints for Structural Defects in Poly(thienylene vinylene) (PTV): A Joint Theoretical–Experimental NMR Study on Model Molecules
  69. Kinetic Monte Carlo Modeling of the Sulfinyl Precursor Route for Poly(p-phenylene vinylene) Synthesis
  70. Influence of polymer hydrolysis on adjuvant effect of Gantrez®AN nanoparticles: Implications for oral vaccination
  71. Identification and Quantification of Defect Structures in Poly(2,5-thienylene vinylene) Derivatives Prepared via the Dithiocarbamate Precursor Route by Means of NMR Spectroscopy on13C-Labeled Polymers
  72. Influence of Fullerene Ordering on the Energy of the Charge-Transfer State and Open-Circuit Voltage in Polymer:Fullerene Solar Cells
  73. Description of the nanostructured morphology of [6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) by XRD, DSC and solid‐state NMR
  74. Water content of pyrolysis oil: Comparison between Karl Fischer titration, GC/MS-corrected azeotropic distillation and 1H NMR spectroscopy
  75. Flash pyrolysis of rapeseed cake: Influence of temperature on the yield and the characteristics of the pyrolysis liquid
  76. Solid‐state NMR as a tool to describe and quantify the morphology of photoactive layers used in plastic solar cells
  77. An Efficient Acid-Induced Conversion of Dithiocarbamate Precursor Polymers into Conjugated Materials
  78. Tetra-alkoxy substituted PPV derivatives: a new class of highly soluble liquid crystalline conjugated polymers
  79. Characterization of Modification of 193-nm Photoresist by HBr Plasma
  80. A Three-Step Synthetic Approach to Asymmetrically Functionalized 4H-Cyclopenta[2,1-b:3,4-b′]dithiophenes
  81. Post-mortem assessment of rat spinal cord injury and white matter sparing using inversion recovery-supported proton density magnetic resonance imaging
  82. ChemInform Abstract: Grignard Reactions on ortho Dicarboxylic Arene Derivatives. Synthesis of 1,3-Dithienylisothianaphthene Compounds.
  83. Kinetic and Mechanistic Study onp-Quinodimethane Formation in the Sulfinyl Precursor Route for the Polymerization of Poly(p-phenylenevinylene) (PPV)
  84. Tracking of myelin-reactive T cells in experimental autoimmune encephalomyelitis (EAE) animals using small particles of iron oxide and MRI
  85. Detailed Visualization of the Functional Regions of the Rat Pituitary Gland by High-Resolution T2-Weighted MRI
  86. Modeling the morphology and mechanical behavior of shape memory polyurethanes based on solid-state NMR and synchrotron SAXS/WAXD
  87. Synthesis,1H and13C NMR assignment and electrochemical properties of novel thiophene-thiazolothiazole oligomers and polymers
  88. Effect on the nasal bioavailability of co-processing drug and bioadhesive carrier via spray-drying
  89. Influence of heat treatment on spray-dried mixtures of Amioca® starch and Carbopol® 974P used as carriers for nasal drug delivery
  90. Macro- and micro-anatomical, histological and computed tomography scan characterization of the nasopalatine canal
  91. Exploring the Dithiocarbamate Precursor Route: Observation of a Base Induced Regioregularity Excess in Poly[(2-methoxy-5-(3′,7′-dimethyloctyloxy))-1,4-phenylenevinylene] (MDMO−PPV)
  92. Efficient formation, isolation and characterization of poly(3-alkylthiophene) nanofibres: probing order as a function of side-chain length
  93. A Joined Theoretical−Experimental Investigation on the1H and13C NMR Signatures of Defects in Poly(vinyl chloride)
  94. Rapid, postmortem 9.4T MRI of spinal cord injury: Correlation with histology and survival times
  95. Chemical and structural modifications in a 193-nm photoresist after low-k dry etch
  96. Visualisation of the kinetics of macrophage infiltration during experimental autoimmune encephalomyelitis by magnetic resonance imaging
  97. Photoresist Characterization and Wet Strip after Low-k Dry Etch
  98. Photoresist Characterization and Wet Strip after Low-k Dry Etch
  99. Anatomical and biometric correlates of functional recovery in the spinal cord injured rat: a postmortem, high-resolution MRI study at 9.4 T
  100. The synthesis of regio-regular poly(3-alkyl-2,5-thienylene vinylene) derivatives using lithium bis(trimethylsilyl)amide (LHMDS) in the dithiocarbamate precursor route
  101. The microanatomical environment of the subthalamic nucleus
  102. Neurovascularization of the anterior jaw bones revisited using high-resolution magnetic resonance imaging
  103. Development of starch-based pellets via extrusion/spheronisation
  104. A joined theoretical–experimental investigation on the 1H and 13C NMR chemical shifts of chloro-alkenes
  105. Thermomechanical properties of thin organosilicate glass films treated with ultraviolet-assisted cure
  106. 2,5‐Substituted PPV‐Derivatives with Different Polarities: The Effect of Side Chain Polarity on Solubility, Optical and Electronic Properties
  107. All-Wet Strip Approaches for Post-Etch Photoresist Layers After Low-K Patterning
  108. NMR study of the nanomorphology in thin films of polymer blends used in organic PV devices: MDMO-PPV/PCBM
  109. Correlation of Postmortem 9.4 Tesla Magnetic Resonance Imaging and Immunohistopathology of the Human Thoracic Spinal Cord 7 Months after Traumatic Cervical Spine Injury
  110. Comparison of the electrical characteristics of four 2,5-substituted poly(p-phenylene vinylene) derivatives with different side chains
  111. Traumatisme médullaire expérimental. Imagerie post-mortem par résonance magnétique de haute résolution (IRM à 9,4 Tesla)
  112. Microanatomical and histological assessment of the content of superior genial spinal foramen and its bony canal
  113. Density functional theory investigation of the stereochemistry effects on 1H and 13C NMR chemical shifts of poly(vinyl chloride) oligomers
  114. Correlation between the molecular morphology and the biocompatibility of bioadhesive carriers prepared from spray-dried starch/Carbopol® blends
  115. Study of the thermal elimination process of sulphinyl-based PPV precursors by solid state NMR
  116. Femoral Neck Trabecular Microstructure in Ovariectomized Ewes Treated With Calcitonin: MRI Microscopic Evaluation
  117. Traumatisme médullaire — imagerie post-mortem par résonance magnétique 9,4T avec correlation anatomo-pathologique
  118. Femoral Neck Trabecular Microstructure in Ovariectomized Ewes Treated With Calcitonin: MRI Microscopic Evaluation
  119. Solid state NMR study of segmented polymer networks: fine-tuning of phase morphology via their molecular design
  120. Synthesis and complete NMR spectral assignment of thiophene‐substituted sulfinyl monomers
  121. Study of the nanomorphology of OC1C10-PPV/precursor-PPV blends by solid state NMR relaxometry
  122. Study of the nanomorphology of OC1C10-PPV/precursor-PPV blends by solid state NMR relaxometry
  123. Study of the water uptake of polyamide 46 based copolymers by magnetic resonance imaging relaxometry
  124. Fully quantitative carbon-13 NMR characterization of resol phenol–formaldehyde prepolymer resins
  125. Identification and Quantification of Polymerization Defects in13C-Labeled Sulfinyl and Gilch OC1C10−PPV by NMR Spectroscopy
  126. Improved quantitative solution state 13C NMR analysis of ethylene-1-octene copolymers
  127. In vitro high-field magnetic resonance imaging—documented anatomy of a fetal myelomeningocele at 20 weeks' gestation. A contribution to the rationale of intrauterine surgical repair of spina bifida
  128. Convenient synthesis and polymerization of 5,6-disubstituted dithiophthalides toward soluble poly(isothianaphthene): An initial spectroscopic characterization of the resulting low-band-gap polymers
  129. Determination of the Local Cross-Link Density in Polyisobutylene-Based Elastomers by NMR Imaging
  130. Solid-state NMR relaxometry study of phenolic resins
  131. Comparative Morphological Study of Poly(dioxolane)/Poly(methyl methacrylate) Segmented Networks and Blends by13C Solid-State NMR and Thermal Analysis
  132. NMR Imaging Study of Stress-Induced Material Response in Rubber Modified Polyamide 6
  133. Micellar Polymers with Hydrocarbon and Fluorocarbon Hydrophobic Chains. A Strategy to Multicompartment Micelles
  134. Morphological study of a poly(3,4-ethylenedioxythiophene)/polystyrenesulfonic acid mixture by solid state 13C-CP/MAS NMR relaxometry
  135. Quantitative magnetic resonance imaging study of water uptake by polyamide 4,6
  136. H NMR Relaxation Study of the Gelation of Syndiotactic Poly(methyl methacrylate) in Toluene
  137. 1H and13C NMR Full Assignment of a Series of Precursor Polymers Derived from the Sulfinyl Route Towards Poly(p-phenylene vinylene)
  138. Synthesis of electron-rich versus electron-poor poly?[1,4-phenylene]-[1-(n-alkylsulfinyl)ethylene]?s via the sulfinyl precursor route in different organic solvents
  139. Relationships between Microvoid Heterogeneity and Physical Properties in Cross-Linked Elastomers:  An NMR Imaging Study
  140. Visualization of Tensile Stress Induced Material Response at a Crack Tip in Polymers under Critical Load by NMR Imaging
  141. ChemInform Abstract: Scope and Limitations of a New Highly Selective Synthesis of Unsymmetrical Monomers for the Synthesis of Precursors Toward Poly(arylenevinylene)s.
  142. The synthesis of poly(4,4′-biphenylene vinylene) and poly(2,6-naphthalene vinylene) via a radical chain polymerisation
  143. New mechanistic aspects on the formation of poly(isothianaphthene) from P4S10 and phthalic anhydride derivatives: carbon–carbon bond formation and cleavage via a cyclic reaction mechanism
  144. Complete assignment of 1H and 13C NMR spectra of a set of sulphinyl and sulphonyl monomers toward poly(p‐phenylenevinylene) precursors
  145. Complete assignment of1H and13C NMR spectra of a set of sulphinyl and sulphonyl monomers toward poly(p-phenylenevinylene) precursors
  146. PEEK Oligomers as Physical Model Compounds for the Polymer. 4. Lamellar Microstructure and Chain Dynamics.
  147. Scope and Limitations of a New Highly Selective Synthesis of Unsymmetrical Monomers for the Synthesis of Precursors toward Poly(arylenevinylene)s
  148. IR and NMR characterisation of extraction products of reductively deuteromethylated coals
  149. New Synthesis of a Soluble High Molecular Weight Poly(arylene vinylene): Poly[2-methoxy-5-(3,7-dimethyloctyloxy)-p-phenylene vinylene]. Polymerization and Device Properties
  150. Optimization of the Polymerization Process of Sulfinyl Precursor Polymers toward Poly(p-phenylenevinylene)
  151. Critical Analysis of Network Defects in Cross-Linked Isobutylene-Based Elastomers by NMR Imaging
  152. 17α-Ethyl-5β-estrane-3α,17β-diol, a biological marker for the abuse of norethandrolone and ethylestrenol in slaughter cattle
  153. Highly Selective Route for Producing Unsymmetrically Substituted Monomers toward Synthesis of Conjugated Polymers Derived from Poly(p-phenylene vinylene)
  154. Qualitative and Quantitative Analysis of Solid State Free Induction Decay (1H NMR) Curves Using a Combination of the Methods of Gardner and Prony:  Isotactic Polypropylene as a Case Study
  155. Solid-State NMR Study of Different Types of Poly(vinyl formal)
  156. The elimination process of sulfinyl-precursor polymers towards poly(p-phenylene vinylene). Methods for monitoring elimination
  157. “Formal” copolymers based on 1,3-dithienylisothianaphthene derivatives: Promising materials for electronic devices
  158. “Formal” copolymers based on 1,3-dithienylisothianaphthene derivatives: Promising materials for electronic devices
  159. Quantitative carbon-13 solid-state n.m.r. and FT–Raman spectroscopy in novolac resins
  160. A highly efficient route towards well-defined modifications of poly(p-phenylene vinylene)
  161. Polymerization Mechanism of 1-[(Butylsulfi(o)nyl)methyl]-4-(halomethyl)benzene:  The Effect of Polarizer and Leaving Group
  162. Synthesis of poly(isothianaphthene) from 1,1,3,3-tetrachlorothiophthalan and tert-butylmercaptan: mechanism and quantitative analysis by solid state n.m.r.
  163. Characterization of poly(isothianaphthene) derivatives and analogs by using solid-state 13C NMR
  164. Grignard Reactions on Ortho Dicarboxylic Arene Derivatives. Synthesis of 1,3-Dithienylisothianaphthene Compounds
  165. Spectroscopic analysis of poly(tetrafluoroisothianaphthene) and aromatic model compounds.
  166. ChemInform Abstract: Unexpected Rearrangements in the Synthesis of Arylidene‐ or Alkylidene‐ 2‐thiophthalides.
  167. Deformation of the cervicomedullary junction and spinal cord in a surgically treated adult Chiari I hindbrain hernia associated with syringomyelia: a magnetic resonance microscopic and neuropathological study
  168. Unexpected rearrangements in the synthesis of arylidene- or alkylidene-2-thiophthalides
  169. Polymers for colon specific drug delivery
  170. Use of Magnetic Resonance Imaging To Study Transport of Methanol in Poly(methyl methacrylate) at Variable Temperature
  171. Solid-State NMR Study of the Multiphase Behavior of Linear and Cross-Linked Poly(1,3-dioxolane)
  172. 1H and13C NMR Spectroscopy as a Tool To Probe the Microstructures of Different Types of Poly(vinyl formal)
  173. Poly(tetrafluorobenzo[c]thiophene). Structure Analysis of Oligomers and Model Compound Based on 1D and 2D NMR Spectroscopy
  174. Study of Solvent Diffusion in Polymeric Materials Using Magnetic Resonance Imaging
  175. Low-Band-Gap Conjugated Polymers. Improved Model Compounds for the Structural Analysis of Poly(isothianaphthene)
  176. Demonstration of methylene-ether bridge formation in melamine-formaldehyde resins
  177. Development and Optimization of Fast Quantitative Carbon-13 NMR Characterization Methods of Novolac Resins
  178. Full 1H and 13C NMR Chemical Shift Assignment of 1-Pyrenyl Substituted Oligosilanes as a Tool to Differentiate between Intramolecular "Through Space" and "Through Bond" Ground State Interactions
  179. Miscibility of an oligo(p-phenylenevinylene) with polystyrene studied by solid-state nuclear magnetic resonance
  180. High field magnetic resonance imaging of normal and pathologic human medulla oblongata
  181. The effect of structural changes on the electronic properties of poly(isothianaphthene) derivatives
  182. Improving selectivity by using a multipurpose cross polarization magic angle spinning NMR pulse sequence
  183. Investigation of melamine-formaldehyde cure by Fourier transform Raman spectroscopy
  184. Miscibility of poly(para-phenylene vinylene) model compounds with polycarbonate studied by solid-state NMR
  185. Miscibility of doped and undoped poly(para-phenylene vinylene) model compounds with PMMA studied by cramps
  186. Low-bandgap conjugated polymers. A joint experimental and theoretical study of the structure of polyisothianaphthene
  187. Effect of iodine doping on the miscibility of poly(para-phenylene vinylene) model compounds mixed with PMMA using NMR solid-state techniques
  188. 13C NMR analysis of ‘Cava’-poly(isothianaphthene) oligomers
  189. An investigation into the electronic structure of poly(isothianaphthene)
  190. A solid-state NMR investigation of the dopability of poly(p-phenylene vinylene) model compounds and corresponding polymers with iodine
  191. Miscibility of poly(para-phenylene vinylene) model compounds with PMMA studied by solid-state NMR
  192. Modification of poly(para-phenylene vinylene) by introduction of aromatic groups on the olefinic carbons
  193. Investigation of protein structure by means of 19F-NMR. A study of hen egg-white lysozyme
  194. Postmortem Studies of the Human Temporal Bone with High-Resolution (9.4 T) MR Microscopy