All Stories

  1. 2D and 3D particle image velocimetry measurement of air flow over a scaled-down model of Bukit Gemok in Telok Kalong industrial area
  2. Thermal degradation kinetics of andrographolide, 14-deoxy-11,12-didehydroandrographolide and neoandrographolide extracted from Andrographis paniculata’s plant at different temperature
  3. Characteristics of dust cloud formation: The effect of conveying speed on flow field of tea powder
  4. Mass spectrometry analysis of auxiliary energy-induced terpenes extraction from Andrographis Paniculata
  5. Thermal and mechanical properties of bamboo fiber reinforced composites
  6. Biodiesel synthesized from waste cooking oil in a continuous microwave assisted reactor reduced PM and NOx emissions
  7. Dispersion of Irregular Particles during Free Fall
  8. Ultrasound-assisted extraction for enhanced retention of physicochemical properties of garlic powder obtained by spray-drying
  9. Assessment on antioxidant activity and physical characteristics of spray dried Mahkota Dewa fruit extracts
  10. Effect of Soil Burial on Mechanical Properties of Bamboo Fiber Reinforced Epoxy Composites
  11. Explosion of rice flour at different concentration and moisture content
  12. Influence of monsoon seasons on accidental chlorine leak and dispersion around Gebeng industrial area
  13. Modeling the effect of hypothetical chlorine leakage from Malay-Sino Chemical Industries using ALOHA software and development of an emergency evacuation route around Teluk Kalong industrial area
  14. Effect of Solution Properties and Operating Parameters on Needleless Electrospinning of Poly(Ethylene Oxide) Nanofibers Loaded with Bovine Serum Albumin
  15. Experimental measurement for non-spherical bulk materials flow behaviour in rectangular enclosure
  16. Assessment of explosibility and explosion severity of rice flour at different concentration and ignition time
  17. Thermal performance enhancement of non-premixed syngas combustion in a partial combustion unit by winged nozzle: Experimental and CFD study
  18. Strengthening of Reinforced Concrete Beams Using Bamboo Fiber/Epoxy Composite Plates in Flexure
  19. Correlation between the extraction yield of mangiferin to the antioxidant activity, total phenolic and total flavonoid content of Phaleria macrocarpa fruits
  20. Acid Hydrolysis of Chitosan to Oligomers Using Hydrochloric Acid
  21. An Overview of Chitosan Nanofibers and their Applications in the Drug Delivery Process
  22. Synthesis and characterization of a La Ni/α-Al2O3 catalyst and its use in pyrolysis of glycerol to syngas
  23. Assessment of chlorine leak dispersion around Gebeng industrial area and potential evacuation route
  24. Orthosiphon stamineus (Java Tea)
  25. Assessment of Maceration, Ultrasonic and Microwave Assisted Extraction for Total Phenolic Content, Total Flavonoid Content and Kaempferol Yield from Cassia alata via Microstructures Analysis
  26. Assessment of Size Reduction and Extraction Methods on the Yield of Gallic Acid from Labisia pumila Leaf via Microstructures Analysis
  27. Effect of Humidity on Formation of Electrospun Polycaprolactone Nanofiber Embedded with Curcumin using Needdleless Electrospinning
  28. A Comprehensive Review on Ocimum basilicum
  29. Assessment of Phenolic Compounds Stability and Retention during Spray Drying of Phyllanthus niruri Extracts
  30. Comparison of Microwave and Ultrasonic Assisted Extraction of Kaempferol from Cassia Alata
  31. Optimisation of Gallic Acid and Quercetin Extraction from Phyllanthus Niruri
  32. A Computational Fluid Dynamics Study of Turbulence, Radiation, and Combustion Models for Natural Gas Combustion Burner
  33. Strengthening Performance of PALF-Epoxy Composite Plate on Reinforced Concrete Beams
  34. INFLUENCE OF ALKALI TREATMENT ON PHYSICO-CHEMICAL PROPERTIES OF MALAYSIAN BAMBOO FIBER: A PRELIMINARY STUDY
  35. Potential External strengthening of reinforced concrete beam using natural fiber composite plate
  36. Modelling of gas-liquid flow in airlift
  37. Catalytic pyrolysis of glycerol into syngas over ceria-promoted Ni/α-Al2O3 catalyst
  38. Metformin - A Panacea Pharmaceutical Agent through convergence revolution initiative
  39. Potential Use of Bamboo Reinforced Concrete Beams towards Sustainable Construction
  40. Natural Resources Product Prospects - International Conference on Fluids and Chemical Engineering-FluidChE 2017, Malaysia
  41. Optimization of Ultrasonic-Assisted Extraction of Polyphenolic and Flavonoids from Labisia pumila
  42. Microwave-Irradiation Induced Fast Simultaneous Extraction of Methoxylated and Hydroxylated Phenolic Compounds from Orthosiphon stamineus Leaves
  43. Computational Fluid Dynamics Modelling of the Dairy Drying Processes
  44. Renewable syngas production from thermal cracking of glycerol over praseodymium-promoted Ni/Al 2 O 3 catalyst
  45. Natural Fiber Composites as Potential External Strengthening Material – A Review
  46. Ultrasonic Assisted Extraction on Phenolic and Flavonoid Content from Phyllanthus niruri Plant
  47. Understanding the Effect of Surface Terrain on Pollution Transport around Gebeng Industrial Area
  48. Experimental measurement and CFD simulation on the hydrodynamics of an internal-loop airlift reactor
  49. The effect of particle size and solvent type on the gallic acid yield obtained from Labisia pumila by ultrasonic extraction
  50. The effect of auxiliary energy on rhein, kaempferol and astragalin extraction from Cassia alata
  51. Magnesium sulphate and β-alanine enhanced the ability of Kluyveromyces marxianus producing bioethanol using oil palm trunk sap
  52. Microwave Reinforced Transesterification of Rubber Seed Oil Using Waste Cement Clinker Catalyst
  53. Characterization of Ag-promoted Ni/SiO2 Catalysts for Syngas Production via Carbon Dioxide (CO2) Dry Reforming of Glycerol
  54. Samarium Promoted Ni/Al2O3 Catalysts for Syngas Production from Glycerol Pyrolys
  55. A study on the kinetics of syngas production from glycerol over alumina-supported samarium–nickel catalyst
  56. Scale-adaptive simulation on the reactive turbulent flow in a partial combustion lance: Assessment of thermal insulators
  57. Needleless Electrospinning Technology – An Entrepreneurial Perspective
  58. Modeling of Methyl Methacrylate Polymerization Using MATLAB
  59. Three-Way Coupling Simulation of a Gas-Liquid Stirred Tank using a Multi-Compartment Population Balance Model
  60. Influence of nozzle design on the performance of a partial combustion lance: A CFD study
  61. Economical Biodiesel Fuel Synthesis from Castor Oil Using Mussel Shell-Base Catalyst (MS-BC)
  62. Effect of the Polymer Composition on the Physicochemical Properties of Microencapsulated Fish Oil Using Spray Drying
  63. Unsteady RANS and detached eddy simulation of the multiphase flow in a co-current spray drying
  64. Analysis of dust distribution in silo during axial filling using computational fluid dynamics: Assessment on dust explosion likelihood
  65. ENERGY DISSIPATION REDUCTION USING SIMILARLY-CHARGED POLYMER-SURFACTANT COMPLEX
  66. CO2 reforming of glycerol over La-Ni/Al2O3 catalyst: A longevity evaluative study
  67. Influence of nutrient addition on the bioethanol yield from oil palm trunk sap fermented by Saccharomyces cerevisiae
  68. Syngas production from glycerol-dry(CO2) reforming over La-promoted Ni/Al2O3 catalyst
  69. Thermal degradation kinetics of nicotinic acid, pantothenic acid and catechin derived from Averrhoa bilimbi fruits
  70. Successive optimisation of waste cooking oil transesterification in a continuous microwave assisted reactor
  71. Extraction and Microencapsulation of Polyphenols from Orthosiphon Stamineus Leaves
  72. Transesterification of Waste Cooking Oil using Chemically Treated Catalyst
  73. Synthesis and characterisation of cement clinker-supported nickel catalyst for glycerol dry reforming
  74. Catalytic performance of cement clinker supported nickel catalyst in glycerol dry reforming
  75. Assessment of phenolic compounds stability and retention during spray drying of Orthosiphon stamineus extracts
  76. Production of CO-rich hydrogen gas from glycerol dry reforming over La-promoted Ni/Al2O3 catalyst
  77. Characterization of La-promoted Ni/Al2O3 catalysts for hydrogen production from glycerol dry reforming
  78. Prediction of Particles-Air Movement in Silo during Filling Operation
  79. Application of Cement Clinker as Ni-Catalyst Support for Glycerol Dry Reforming
  80. Hydrogen Production via Glycerol Dry Reforming over La-Ni/Al2O3 Catalyst
  81. Biodiesel Production from Rubber Seed Oil using Activated Cement Clinker as Catalyst
  82. Thermal Denaturation Kinetics of Whey Protein and Maltodextrin Mixture
  83. Assessment on Bioavailability of Flavonoids from Orthosiphon Stamineus During Spray Drying
  84. Hydrogen as Carbon Gasifying Agent During Glycerol Steam Reforming over Bimetallic Co-Ni Catalyst
  85. Biodiesel Production from Rubber Seed Oil Using A Limestone Based Catalyst
  86. Detached eddy simulation on the turbulent flow in a stirred tank
  87. A Study of Particle Histories during Spray Drying Using Computational Fluid Dynamic Simulations
  88. Application of Computational Fluid Dynamics (CFD) Simulations to Spray-Freezing Operations
  89. Simultaneous Quadrature Method of Moments for the Solution of Population Balance Equations, Using a Differential Algebraic Equation Framework
  90. Modelling of mass transfer in gas–liquid stirred tanks agitated by Rushton turbine and CD-6 impeller: A scale-up study
  91. CFD Simulation of Aerocyclone Hydrodynamics and Performance at Extreme Temperature
  92. A CFD study of the effect of cone dimensions on sampling aerocyclones performance and hydrodynamics
  93. Corrigendum to “The influence of temperature and inlet velocity on cyclone pressure drop: A CFD study” [Chem. Eng. Process. 44 (1) (2005) 7–12]
  94. Adsorption of basic dye onto palm kernel shell activated carbon: sorption equilibrium and kinetics studies
  95. Prediction of the effects of cone tip diameter on the cyclone performance
  96. A CFD Study on the Prediction of Cyclone Collection Efficiency
  97. The influence of temperature and inlet velocity on cyclone pressure drop: a CFD study
  98. Bioreactor design via spreadsheet––a study on the monosodium glutamate (MSG) process
  99. Prediction of the Effect of Dimension, Particle Density, Temperature, and Inlet Velocity on Cyclone Collection Efficiency
  100. The influence of temperature and inlet velocity on cyclone pressure drop: a CFD study
  101. Comment on: “Performance of different analytical methods in evaluating grade efficiency of centrifugal separators” by Ray M.B., Hoffmann A.C. and Postma R.S. (2000)
  102. Computational Fluid Mixing