All Stories

  1. A review of remote laser-induced breakdown spectroscopy

    Article • Applied Spectroscopy Reviews, May 2018, Taylor & Francis

    Professor Xiangyou Li, Yongfeng Lu

  2. Preparation of carbon dots by non-focusing pulsed laser irradiation in toluene

    Article • Chemical Communications, January 2016, Royal Society of Chemistry

    Professor Xiangyou Li

  3. Analysis of ion doping profiles in Yb-doped fiber preforms using laser-induced breakdown spectroscopy

    Article • Journal of Analytical Atomic Spectrometry, January 2016, Royal Society of Chemistry

    Professor Xiangyou Li

  4. Laser-induced breakdown spectroscopy using laser pulses delivered by optical fibers for analyzing Mn and Ti elements in pig iron

    Article • Journal of Analytical Atomic Spectrometry, January 2015, Royal Society of Chemistry

    Professor Xiangyou Li

  5. Analytical-performance improvement of laser-induced breakdown spectroscopy for steel using multi-spectral-line calibration with an artificial neural network

    Article • Journal of Analytical Atomic Spectrometry, January 2015, Royal Society of Chemistry

    Professor Xiangyou Li

  6. Accuracy improvement of quantitative analysis in laser-induced breakdown spectroscopy using modified wavelet transform

    Article • Optics Express, April 2014, Optical Society of America (OSA)

    Professor Xiangyou Li

  7. Accuracy improvement on polymer identification using laser-induced breakdown spectroscopy with adjusting spectral weightings

    Article • Optics Express, February 2014, Optical Society of America (OSA)

    Professor Xiangyou Li

  8. Element dependence of enhancement in optics emission from laser-induced plasma under spatial confinement

    Article • Journal of Analytical Atomic Spectrometry, January 2014, Royal Society of Chemistry

    Professor Xiangyou Li

  9. Quantitative analysis of phosphorus in steel using laser-induced breakdown spectroscopy in air atmosphere

    Article • Journal of Analytical Atomic Spectrometry, January 2014, Royal Society of Chemistry

    Professor Xiangyou Li

  10. Sensitivity improvement in the detection of V and Mn elements in steel using laser-induced breakdown spectroscopy with ring-magnet confinement

    Article • Journal of Analytical Atomic Spectrometry, January 2014, Royal Society of Chemistry

    Professor Xiangyou Li

  11. Effects of processing parameters on tensile properties of selective laser melted 304 stainless steel

    Article • Materials & Design (1980-2015), September 2013, Elsevier

    Professor Xiangyou Li

  12. The Effect of Deposition Patterns on the Deformation of Substrates During Direct Laser Fabrication

    Article • Journal of Engineering Materials and Technology, May 2013, ASME International

    Professor Xiangyou Li

  13. Photomediated assembly of single crystalline silver spherical particles with enhanced electrochemical performance

    Article • Journal of Materials Chemistry A, January 2013, Royal Society of Chemistry

    Professor Xiangyou Li

  14. Characterization and formation mechanism of laser-welded Mg and Al alloys using Ti interlayer

    Article • Scripta Materialia, July 2012, Elsevier

    Professor Xiangyou Li

  15. Process and joint characterizations of laser–MIG hybrid welding of AZ31 magnesium alloy

    Article • Journal of Materials Processing Technology, June 2012, Elsevier

    Professor Xiangyou Li

  16. Gallium Phosphide Spherical Particles by Pulsed Laser Irradiation in Liquid

    Article • Science of Advanced Materials, March 2012, American Scientific Publishers

    Professor Xiangyou Li

  17. Tetragonal zirconia spheres fabricated by carbon-assisted selective laser heating in a liquid medium

    Article • Nanotechnology, February 2012, Institute of Physics Publishing

    Professor Xiangyou Li

  18. The microstructure and mechanical properties of deposited-IN718 by selective laser melting

    Article • Journal of Alloys and Compounds, February 2012, Elsevier

    Professor Xiangyou Li

  19. Tensile properties of 304 stainless steel fabricated by selective laser melting

    Article • January 2012, Optical Society of America (OSA)

    Professor Xiangyou Li

  20. One-step preparation of amorphous iron nanoparticles by laser ablation

    Article • Powder Technology, January 2012, Elsevier

    Professor Xiangyou Li

  21. General Bottom‐Up Construction of Spherical Particles by Pulsed Laser Irradiation of Colloidal Nanoparticles: A Case Study on CuO

    Article • Chemistry - A European Journal, December 2011, Wiley

    Professor Xiangyou Li

  22. Single-Crystalline Rutile TiO2 Hollow Spheres: Room-Temperature Synthesis, Tailored Visible-Light-Extinction, and Effective Scattering Layer for Quantum Dot-Sensitized Solar Cells

    Article • Journal of the American Chemical Society, November 2011, American Chemical Society (ACS)

    Professor Xiangyou Li

  23. Fabrication of fluorinated polyimide optical waveguides by micropen direct writing technology

    Article • Optics and Lasers in Engineering, July 2011, Elsevier

    Professor Xiangyou Li

  24. Preparation of silver spheres by selective laser heating in silver-containing precursor solution: erratum

    Article • Optics Express, June 2011, Optical Society of America (OSA)

    Professor Xiangyou Li

  25. Fabrication of Crystalline Silicon Spheres by Selective Laser Heating in Liquid Medium

    Article • Langmuir, March 2011, American Chemical Society (ACS)

    Professor Xiangyou Li

  26. Size‐Tailored ZnO Submicrometer Spheres: Bottom‐Up Construction, Size‐Related Optical Extinction, and Selective Aniline Trapping

    Article • Advanced Materials, March 2011, Wiley

    Professor Xiangyou Li

  27. Preparation of silver spheres by selective laser heating in silver-containing precursor solution

    Article • Optics Express, January 2011, Optical Society of America (OSA)

    Professor Xiangyou Li

  28. Preparation of carbon quantum dots with tunable photoluminescence by rapid laser passivation in ordinary organic solvents

    Article • Chemical Communications, January 2011, Royal Society of Chemistry

    Professor Xiangyou Li

  29. Carbon-assisted fabrication of submicrometre spheres for low-optical-absorbance materials by selective laser heating in liquid

    Article • Journal of Materials Chemistry, January 2011, Royal Society of Chemistry

    Professor Xiangyou Li

  30. Magnetic Silver-Coated Ferrite Nanoparticles and Their Application in Thick Films

    Article • Journal of Electronic Materials, September 2010, Springer Science + Business Media

    Professor Xiangyou Li

  31. Selective Pulsed Heating for the Synthesis of Semiconductor and Metal Submicrometer Spheres

    Article • Angewandte Chemie, August 2010, Wiley

    Professor Xiangyou Li

  32. Selective Pulsed Heating for the Synthesis of Semiconductor and Metal Submicrometer Spheres

    Article • Angewandte Chemie International Edition, August 2010, Wiley

    Professor Xiangyou Li

  33. Electrically Conductive Thick Film Made from Silver Alkylcarbamates

    Article • Journal of Electronic Materials, July 2010, Springer Science + Business Media

    Professor Xiangyou Li

  34. High-performance electrically conductive silver paste prepared by silver-containing precursor

    Article • Applied Physics A, May 2010, Springer Science + Business Media

    Professor Xiangyou Li

  35. Silver nanoparticles prepared by chemical reduction-protection method, and their application in electrically conductive silver nanopaste

    Article • Journal of Alloys and Compounds, April 2010, Elsevier

    Professor Xiangyou Li

  36. MicroPen direct-write deposition of polyimide

    Article • Microelectronic Engineering, October 2009, Elsevier

    Professor Xiangyou Li

  37. Laser micro-cladding electronic pastes for fabrication of MIM thick film capacitors

    Article • Frontiers of Optoelectronics in China, March 2009, Springer Science + Business Media

    Professor Xiangyou Li

  38. Direct fabrication of SnO2-based thick film gas sensor using Micropen direct writing and laser microcladding

    Article • Sensors and Actuators B Chemical, March 2009, Elsevier

    Professor Xiangyou Li

  39. Fabrication of microheater by laser micro cladding electronic paste

    Article • Materials Science and Engineering B, February 2009, Elsevier

    Professor Xiangyou Li

  40. Laser sintering of thick-film PTC thermistor paste deposited by micro-pen direct-write technology

    Article • Microelectronic Engineering, January 2009, Elsevier

    Professor Xiangyou Li

  41. 激光烧结厚膜正温度系数热敏电阻浆料的研究

    Article • Chinese Journal of Lasers, January 2009, Shanghai Institute of Optics and Fine Mechanics

    Professor Xiangyou Li

  42. 355 nm紫外激光加工柔性线路板盲孔的研究

    Article • Chinese Journal of Lasers, January 2009, Shanghai Institute of Optics and Fine Mechanics

    Professor Xiangyou Li

  43. Study on thick-film PTC thermistor fabricated by micro-pen direct writing

    Article • Microelectronics Journal, December 2008, Elsevier

    Professor Xiangyou Li

  44. Frequency characteristics of the MIM thick film capacitors fabricated by laser micro-cladding electronic pastes

    Article • Materials Science and Engineering B, May 2008, Elsevier

    Professor Xiangyou Li

  45. 355 nm和1064 nm全固态激光器刻蚀印刷线路板

    Article • Chinese Journal of Lasers, January 2008, Shanghai Institute of Optics and Fine Mechanics

    Professor Xiangyou Li

  46. Laser direct fabrication of silver conductors on glass boards

    Article • Thin Solid Films, July 2005, Elsevier

    Professor Xiangyou Li

  47. Silver conductor fabrication by laser direct writing on Al2O3 substrate

    Article • Applied Physics A, December 2004, Springer Science + Business Media

    Professor Xiangyou Li

  48. Conductive line preparation on resin surfaces by laser micro-cladding conductive pastes

    Article • Applied Surface Science, June 2004, Elsevier

    Professor Xiangyou Li