All Stories

  1. Blocking polysulfide by physical confinement and catalytic conversion of SiO2@MXene for Li–S battery
  2. Progress and prospects of two-dimensional materials for membrane-based osmotic power generation
  3. Flexible sodium-ion capacitors boosted by high electrochemically-reactive and structurally-stable Sb2S3 nanowire/Ti3C2Tx MXene film anodes
  4. 1,2-dithioglycol functionalised carbon nitride quantum dots as a “turn – off” fluorescent sensor for mercury ion detection
  5. Stable and efficient nitrogen-containing-carbon based electrocatalysts for reactions in energy conversion systems
  6. Solar Cells: Facile Synthesis of Crumpled Nitrogen-Doped MXene Nanosheets as a New Sulfur Host for Lithium-Sulfur Batteries (Adv. Energy Mater. 13/2018)
  7. Incremental capacity analysis and differential voltage analysis based state of charge and capacity estimation for lithium-ion batteries
  8. Nitrogen doped yolk-shell carbon spheres as cathode host for lithium-sulfur battery
  9. Self-standing sulfur cathodes enabled by 3D hierarchically porous titanium monoxide-graphene composite film for high-performance lithium-sulfur batteries
  10. Synergistic effect of metal ion additives on graphitic carbon nitride nanosheet-templated electrodeposition of Cu@CuO for enzyme-free glucose detection
  11. Porous Cryo-Dried MXene for Efficient Capacitive Deionization
  12. Three-dimensional pie-like current collectors for dendrite-free lithium metal anodes
  13. Voltammetric simultaneous ion flux measurements platform for Cu 2+ , Pb 2+ and Hg 2+ near rice root surface: Utilizing carbon nitride heterojunction film modified carbon fiber microelectrode
  14. SnS2 /Sb2 S3 Heterostructures Anchored on Reduced Graphene Oxide Nanosheets with Superior Rate Capability for Sodium-Ion Batteries
  15. Pomegranate-Structured Silica/Sulfur Composite Cathodes for High-Performance Lithium-Sulfur Batteries
  16. In situ growth of ZnO nanodots on carbon hierarchical hollow spheres as high-performance electrodes for lithium-ion batteries
  17. Hierarchical sodium-rich Prussian blue hollow nanospheres as high-performance cathode for sodium-ion batteries
  18. High Crystalline Prussian White Nanocubes as a Promising Cathode for Sodium-ion Batteries
  19. Updated Metal Compounds (MOFs, S, OH, N, C) Used as Cathode Materials for Lithium-Sulfur Batteries
  20. Facile Synthesis of Crumpled Nitrogen-Doped MXene Nanosheets as a New Sulfur Host for Lithium-Sulfur Batteries
  21. MOF-derived porous N–Co3O4@N–C nanododecahedra wrapped with reduced graphene oxide as a high capacity cathode for lithium–sulfur batteries
  22. Highly Reversible Lithium Polysulfide Semiliquid Battery with Nitrogen-Rich Carbon Fiber Electrodes
  23. Enhanced and one-way absorptance of LiNiO2 thin films in one-dimensional photonic crystals
  24. Solvothermal Synthesis of a Hollow Micro-Sphere LiFePO4/C Composite with a Porous Interior Structure as a Cathode Material for Lithium Ion Batteries
  25. Bio-inspired Self-Healing Electrolytes for Li-S Batteries
  26. Current Progress on Rechargeable Magnesium-Air Battery
  27. Confined Sulfur in 3 D MXene/Reduced Graphene Oxide Hybrid Nanosheets for Lithium-Sulfur Battery
  28. Two-dimensional layered compound based anode materials for lithium-ion batteries and sodium-ion batteries
  29. Hollow MXene Spheres and 3D Macroporous MXene Frameworks for Na-Ion Storage
  30. Fabrication Methods of Porous Carbon Materials and Separator Membranes for Lithium-Sulfur Batteries: Development and Future Perspectives
  31. Naturally nitrogen doped porous carbon derived from waste shrimp shells for high-performance lithium ion batteries and supercapacitors
  32. Co3O4-Carbon Cloth free standing cathode for lithium sulfur battery
  33. Prussian Blue Nanocubes with an Open Framework Structure Coated with PEDOT as High-Capacity Cathodes for Lithium-Sulfur Batteries
  34. Multifunctional Free-Standing Gel Polymer Electrolyte with Carbon Nanofiber Interlayers for High-Performance Lithium-Sulfur Batteries
  35. Modified Tetrathiafulvalene as an Organic Conductor for Improving Performances of Li−O2 Batteries
  36. Modified Tetrathiafulvalene as an Organic Conductor for Improving Performances of Li−O2 Batteries
  37. Bimetal-Organic-Framework Derivation of Ball-Cactus-Like Ni-Sn-P@C-CNT as Long-Cycle Anode for Lithium Ion Battery
  38. Porous Carbon Composites for Next Generation Rechargeable Lithium Batteries
  39. Hierarchical Porous Carbon Spheres for High-Performance Na-O2 Batteries
  40. A multi-functional gel co-polymer bridging liquid electrolyte and solid cathode nanoparticles: An efficient route to Li–O2 batteries with improved performance
  41. Ultra-high sensitive voltammetric sensor modified by largely oxygenous functionalized ultrathin carbon nitride nanosheets for detection of Cu (II)
  42. Strain Controlled Ferromagnetic-Antiferromagnetic Transformation in Mn-Doped Silicene for Information Transformation Devices
  43. Bandgap engineering of ultrathin graphene-like carbon nitride nanosheets with controllable oxygenous functionalization
  44. Nitrogen-Doped Porous Carbon Nanosheets from Eco-Friendly Eucalyptus Leaves as High Performance Electrode Materials for Supercapacitors and Lithium Ion Batteries
  45. Construction of a non-enzymatic sensor based on the poly(o-phenylenediamine)/Ag-NPs composites for detecting glucose in blood
  46. Hierarchical porous carbon derived from soybean hulls as a cathode matrix for lithium-sulfur batteries
  47. Mesoporous Germanium Anode Materials for Lithium-Ion Battery with Exceptional Cycling Stability in Wide Temperature Range
  48. Recent developments of aprotic lithium-oxygen batteries: functional materials determine the electrochemical performance
  49. Fabrication of core–shell, yolk–shell and hollow Fe3O4@carbon microboxes for high-performance lithium-ion batteries
  50. Sb2O3/MXene(Ti3C2Tx) hybrid anode materials with enhanced performance for sodium-ion batteries
  51. 3D Interconnected Carbon Fiber Network-Enabled Ultralong Life Na3V2(PO4)3@Carbon Paper Cathode for Sodium-Ion Batteries
  52. Fabrication of N-doped Graphene-Carbon Nanotube Hybrids from Prussian Blue for Lithium-Sulfur Batteries
  53. Facile synthesis of graphitic carbon nitride/nanostructured α-Fe2O3 composites and their excellent electrochemical performance for supercapacitor and enzyme-free glucose detection applications
  54. Antimony/Porous Biomass Carbon Nanocomposites as High-Capacity Anode Materials for Sodium-Ion Batteries
  55. Production of MoS2/CoSe2 hybrids and their performance as oxygen reduction reaction catalysts
  56. Immobilizing Polysulfides with MXene-Functionalized Separators for Stable Lithium–Sulfur Batteries
  57. Rose flower-like NiCo2O4 with hierarchically porous structures for highly reversible lithium storage
  58. 3D Metal Carbide@Mesoporous Carbon Hybrid Architecture as a New Polysulfide Reservoir for Lithium-Sulfur Batteries
  59. High-Capacity Aqueous Potassium-Ion Batteries for Large-Scale Energy Storage
  60. Co-estimation of state-of-charge, capacity and resistance for lithium-ion batteries based on a high-fidelity electrochemical model
  61. Unraveling the catalytic activities of ruthenium nanocrystals in high performance aprotic Li–O2 batteries
  62. Unveiling the active sites of graphene-catalyzed peroxymonosulfate activation
  63. Porous carbon nanocages encapsulated with tin nanoparticles for high performance sodium-ion batteries
  64. 3D hybrid–porous carbon derived from carbonization of metal organic frameworks for high performance supercapacitors
  65. Novel methods for estimating lithium-ion battery state of energy and maximum available energy
  66. Voltammetric Sensor Modified by EDTA-immobilized Graphene-like Carbon Nitride Nanosheets: Preparation, Characterization and Selective Determination of Ultra-Trace Pb (II) in Water Samples
  67. Porous heterostructured MXene/carbon nanotube composite paper with high volumetric capacity for sodium-based energy storage devices
  68. Ruthenium nanocrystal decorated vertical graphene nanosheets@Ni foam as highly efficient cathode catalysts for lithium-oxygen batteries
  69. Fabrication of the protonated graphitic carbon nitride nanosheets as enhanced electrochemical sensing platforms for hydrogen peroxide and paracetamol detection
  70. Occurrence of radical and nonradical pathways from carbocatalysts for aqueous and nonaqueous catalytic oxidation
  71. Surface-tailored nanodiamonds as excellent metal-free catalysts for organic oxidation
  72. Enhancement of the Rate Capability of LiFePO4by a New Highly Graphitic Carbon-Coating Method
  73. A comparative study of battery balancing strategies for different battery operation processes
  74. 3D Free-Standing NiCo2 O4 @graphene Foam for High-Performance Supercapacitors
  75. Cobalt-Based Layered Metal–Organic Framework as an Ultrahigh Capacity Supercapacitor Electrode Material
  76. Hydrothermal Synthesis of Multiwalled Carbon Nanotube-Zinc Manganate Nanoparticles as Anode Materials for Lithium Ion Batteries
  77. Multiwall carbon nanotube-nickel cobalt oxide hybrid structure as high performance electrodes for supercapacitors and lithium ion batteries
  78. A free-standing LiFePO4–carbon paper hybrid cathode for flexible lithium-ion batteries
  79. A nitrogen–sulfur co-doped porous graphene matrix as a sulfur immobilizer for high performance lithium–sulfur batteries
  80. Electrospun cobalt embedded porous nitrogen doped carbon nanofibers as an efficient catalyst for water splitting
  81. Energy Storage Technologies for Solar Photovoltaic Systems
  82. Germanium-based multiphase material as a high-capacity and cycle-stable anode for lithium-ion batteries
  83. Organic sodium terephthalate@graphene hybrid anode materials for sodium-ion batteries
  84. Ruthenium decorated hierarchically ordered macro–mesoporous carbon for lithium oxygen batteries
  85. MoS2Nanosheets Vertically Aligned on Carbon Paper: A Freestanding Electrode for Highly Reversible Sodium-Ion Batteries
  86. A Bifunctional Organic Redox Catalyst for Rechargeable Lithium–Oxygen Batteries with Enhanced Performances
  87. Advances in Electrochemical Energy Materials and Technologies
  88. Improved Electrochemical Performance of Na-Ion Batteries in Ether-Based Electrolytes: A Case Study of ZnS Nanospheres
  89. Development of a Disposable Label-Free Impedance Immunosensor for Direct and Sensitive Clenbuterol Determination in Pork
  90. Glucose Sensors Based on Core@Shell Magnetic Nanomaterials and Their Application in Diabetes Management: A Review
  91. Enhancement of stability for lithium oxygen batteries by employing electrolytes gelled by poly(vinylidene fluoride-co-hexafluoropropylene) and tetraethylene glycol dimethyl ether
  92. Microwave synthesis of α-Fe2O3 nanoparticles and their lithium storage properties: A comparative study
  93. Graphitic Carbon Conformal Coating of Mesoporous TiO2Hollow Spheres for High-Performance Lithium Ion Battery Anodes
  94. Enhancement of the Stability of Fluorine Atoms on Defective Graphene and at Graphene/Fluorographene Interface
  95. Anatase TiO2: Better Anode Material Than Amorphous and Rutile Phases of TiO2for Na-Ion Batteries
  96. MoS2Nanosheets Supported on 3D Graphene Aerogel as a Highly Efficient Catalyst for Hydrogen Evolution
  97. Antimony-Carbon-Graphene Fibrous Composite as Freestanding Anode Materials for Sodium-ion Batteries
  98. Effect of sulfur content in a sulfur-activated carbon composite on the electrochemical properties of a lithium/sulfur battery
  99. Multi-chambered micro/mesoporous carbon nanocubes as new polysulfides reserviors for lithium–sulfur batteries with long cycle life
  100. Sustainable process for all-carbon electrodes: Horticultural doping of natural-resource-derived nano-carbons for high-performance supercapacitors
  101. Scalable Preparation of LiFePO 4 /C Nanocomposites with sp 2 -Coordinated Carbon Coating as High-Performance Cathode Materials for Lithium-Ion Batteries
  102. Construction of an impedimetric immunosensor for label-free detecting carbofuran residual in agricultural and environmental samples
  103. 3D Networked Tin Oxide/Graphene Aerogel with a Hierarchically Porous Architecture for High-Rate Performance Sodium-Ion Batteries
  104. Mesoporous Carbon Nanocube Architecture for High-Performance Lithium-Oxygen Batteries
  105. Sn@CNT nanopillars grown perpendicularly on carbon paper: A novel free-standing anode for sodium ion batteries
  106. Hierarchical Vanadium Pentoxide Spheres as High-Performance Anode Materials for Sodium-Ion Batteries
  107. Single-Step, Plasma-Enabled Reforming of Natural Precursors into Vertical Graphene Electrodes with High Areal Capacitance
  108. Bismuth: A new anode for the Na-ion battery
  109. Microwave-assisted Synthesis of Mesoporous Co3O4Nanoflakes for Applications in Lithium Ion Batteries and Oxygen Evolution Reactions
  110. MoS2/Graphene Composite Anodes with Enhanced Performance for Sodium-Ion Batteries: The Role of the Two-Dimensional Heterointerface
  111. Gold nanocrystals with variable index facets as highly effective cathode catalysts for lithium–oxygen batteries
  112. Graphene-Co3O4 nanocomposite as electrocatalyst with high performance for oxygen evolution reaction
  113. A comparative investigation on the effects of nitrogen-doping into graphene on enhancing the electrochemical performance of SnO2/graphene for sodium-ion batteries
  114. Hydrogenation of silicene with tensile strains
  115. Porous graphene wrapped CoO nanoparticles for highly efficient oxygen evolution
  116. Advances in graphene-based semiconductor photocatalysts for solar energy conversion: fundamentals and materials engineering
  117. Insights into N-doping in single-walled carbon nanotubes for enhanced activation of superoxides: a mechanistic study
  118. Hierarchical Ru nanospheres as highly effective cathode catalysts for Li–O2batteries
  119. Polypyrrole hollow nanospheres: stable cathode materials for sodium-ion batteries
  120. Micelle-Template Synthesis of Nitrogen-Doped Mesoporous Graphene as an Efficient Metal-Free Electrocatalyst for Hydrogen Production
  121. Ultrathin MoS2Nanosheets as Anode Materials for Sodium-Ion Batteries with Superior Performance
  122. Porous poly(vinylidene fluoride-co-hexafluoropropylene) polymer membrane with sandwich-like architecture for highly safe lithium ion batteries
  123. Mesoporous MnCo2O4with a Flake-Like Structure as Advanced Electrode Materials for Lithium-Ion Batteries and Supercapacitors
  124. A Microwave Synthesis of Mesoporous NiCo2O4Nanosheets as Electrode Materials for Lithium-Ion Batteries and Supercapacitors
  125. Polypyrrole single and double-shelled nanospheres templated by pyrrole–Hg(II) complex: Synthesis, characterization, formation mechanism and electrochemical performance
  126. Construction of a non-enzymatic glucose sensor based on copper nanoparticles/poly(o-phenylenediamine) nanocomposites
  127. Synthesis of Single-Crystalline Spinel LiMn2O4Nanorods for Lithium-Ion Batteries with High Rate Capability and Long Cycle Life
  128. Mesoporous hexagonal Co3O4 for high performance lithium ion batteries
  129. Charge–discharge properties of tin dioxide for sodium-ion battery
  130. High-Specific-Capacitance Supercapacitor Based on Vanadium Oxide Nanoribbon
  131. Physical and Electrochemical Characterization of 0.3Li2MnO3·0.7LiMn0.60Ni0.25Co0.15O2 Material for Li Secondary Battery
  132. A Three-Component Nanocomposite with Synergistic Reactivity for Oxygen Reduction Reaction in Alkaline Solution
  133. Hydrogen storage in porous graphene with Al decoration
  134. Single-walled carbon nanotube-based polymer monoliths for the enantioselective nano-liquid chromatographic separation of racemic pharmaceuticals
  135. Ultra-thin Al2O3 coating on the acid-treated 0.3Li2MnO3⋅0.7LiMn0.60Ni0.25Co0.15O2 electrode for Li-ion batteries
  136. CuO single crystal with exposed {001} facets - A highly efficient material for gas sensing and Li-ion battery applications
  137. Honeycomb-like porous gel polymer electrolyte membrane for lithium ion batteries with enhanced safety
  138. Single Crystalline Co3O4 Nanocrystals Exposed with Different Crystal Planes for Li-O2 Batteries
  139. Highly Porous NiCo2O4Nanoflakes and Nanobelts as Anode Materials for Lithium-Ion Batteries with Excellent Rate Capability
  140. Microwave-assisted synthesis of spherical β-Ni(OH)2 superstructures for electrochemical capacitors with excellent cycling stability
  141. Cu2O Decorated with Cocatalyst MoS2for Solar Hydrogen Production with Enhanced Efficiency under Visible Light
  142. Porous carbon particles derived from natural peanut shells as lithium ion battery anode and its electrochemical properties
  143. Hierarchical macroporous/mesoporous NiCo2O4nanosheets as cathode catalysts for rechargeable Li–O2batteries
  144. ChemInform Abstract: WS2@graphene Nanocomposites as Anode Materials for Na-Ion Batteries with Enhanced Electrochemical Performances.
  145. Porous Graphene Nanoarchitectures: An Efficient Catalyst for Low Charge-Overpotential, Long Life, and High Capacity Lithium–Oxygen Batteries
  146. Sb2O3 Nanowires as Anode Material for Sodium-Ion Battery
  147. Mesocrystal Co3O4 nanoplatelets as high capacity anode materials for Li-ion batteries
  148. SnS2Nanoplatelet@Graphene Nanocomposites as High-Capacity Anode Materials for Sodium-Ion Batteries
  149. Dual Protection of Sulfur by Carbon Nanospheres and Graphene Sheets for Lithium-Sulfur Batteries
  150. Hydrothermal synthesis of FeP4 and Fe2P-loaded α-Fe2O3 hollow spheres and applications in gas sensors
  151. DETERMINATION OF PROLINE, HYDROXYPROLINE, AND N–ETHYLGLYCINE IN URINE BY USING A NEW HPLC LABELING REAGENT, AND ITS APPLICATION IN DETECTION OF TUMOR MARKERS
  152. Mesoporous carbon with large pores as anode for Na-ion batteries
  153. Synthesis and Characterization of Vanadium Oxide Nanotube Electrode Material for Electrochemical Capacitors
  154. Hierarchical Mesoporous SnO Microspheres as High Capacity Anode Materials for Sodium-Ion Batteries
  155. Construction of a non-enzymatic glucose sensor based on copolymer P4VP-co-PAN and Fe2O3 nanoparticles
  156. 3D Hyperbranched Hollow Carbon Nanorod Architectures for High-Performance Lithium-Sulfur Batteries
  157. WS2@graphene nanocomposites as anode materials for Na-ion batteries with enhanced electrochemical performances
  158. 3D mesoporous hybrid NiCo2O4@graphene nanoarchitectures as electrode materials for supercapacitors with enhanced performances
  159. Soft-template synthesis of 3D porous graphene foams with tunable architectures for lithium–O2 batteries and oil adsorption applications
  160. An optimized LiNO3/DMSO electrolyte for high-performance rechargeable Li–O2 batteries
  161. An investigation of the morphology effect in Fe2O3anodes for lithium ion batteries
  162. A simple approach to prepare nickel hydroxide nanosheets for enhanced pseudocapacitive performance
  163. Hierarchical orthorhombic V2O5 hollow nanospheres as high performance cathode materials for sodium-ion batteries
  164. Multi-shelled hollow carbon nanospheres for lithium–sulfur batteries with superior performances
  165. Fabrication and enhanced electrochemical performances of MoO3/graphene composite as anode material for lithium-ion batteries
  166. Graphene/MnO2 hybrid nanosheets as high performance electrode materials for supercapacitors
  167. Microwave hydrothermal synthesis of urchin-like NiO nanospheres as electrode materials for lithium-ion batteries and supercapacitors with enhanced electrochemical performances
  168. Novel Materials and Their Synthesis
  169. Single-Crystalline Bilayered V2O5Nanobelts for High-Capacity Sodium-Ion Batteries
  170. A study of PtxCoy alloy nanoparticles as cathode catalysts for lithium-air batteries with improved catalytic activity
  171. Conducting polymer-doped polyprrrole as an effective cathode catalyst for Li-O2 batteries
  172. Degradation mechanism of room temperature Na/Ni3S2 cells using Ni3S2 electrodes prepared by mechanical alloying
  173. Electrochemical properties of an as-deposited LiFePO4 thin film electrode prepared by aerosol deposition
  174. One-dimensional magnetite Fe3O4 nanowires as electrode material for Li-ion batteries with improved electrochemical performance
  175. β-MnO2 nanorods with exposed tunnel structures as high-performance cathode materials for sodium-ion batteries
  176. Hierarchical 3D mesoporous silicon@graphene nanoarchitectures for lithium ion batteries with superior performance
  177. Ordered Mesoporous Core/Shell SnO2/C Nanocomposite as High-Capacity Anode Material for Lithium-Ion Batteries
  178. Facile chemical synthesis of nitrogen-doped graphene sheets and their electrochemical capacitance
  179. Large-scale and low cost synthesis of graphene as high capacity anode materials for lithium-ion batteries
  180. Self-Assembling Synthesis of Free-standing Nanoporous Graphene-Transition-Metal Oxide Flexible Electrodes for High-Performance Lithium-Ion Batteries and Supercapacitors
  181. Facile Synthesis of Ge@C Core-Shell Nanocomposites for High-Performance Lithium Storage in Lithium-Ion Batteries
  182. Synthesis of MnO2/poly-o-phenylenediamine composite and its application in supercapacitors
  183. ZnO nanocrystals with a high percentage of exposed reactive facets for enhanced gas sensing performance
  184. Hydrothermal Synthesis of Nickel Oxide Nanosheets for Lithium-Ion Batteries and Supercapacitors with Excellent Performance
  185. Ruthenium nanocrystals as cathode catalysts for lithium-oxygen batteries with a superior performance
  186. Single Crystalline Na0.7MnO2Nanoplates as Cathode Materials for Sodium-Ion Batteries with Enhanced Performance
  187. Folic acid-functionalized magnetic ZnFe2O4 hollow microsphere core/mesoporous silica shell composite particles: Synthesis and application in drug release
  188. Hierarchical NiCo2O4 nanorods as an efficient cathode catalyst for rechargeable non-aqueous Li–O2 batteries
  189. Fabrication of nanoelectrode ensembles formed via PAN–co–PAA self-assembly and selective voltammetric detection of uric acid in biologic samples
  190. Porous LiFePO4/C Microspheres as High-Power Cathode Materials for Lithium Ion Batteries
  191. Synthesis of Fe2O3–CNT–graphene hybrid materials with an open three-dimensional nanostructure for high capacity lithium storage
  192. Synthesis of Highly Ordered Mesoporous Co3O4 for Gas Sensing
  193. SnO2@MWCNT nanocomposite as a high capacity anode material for sodium-ion batteries
  194. Manganese-Based Layered Coordination Polymer: Synthesis, Structural Characterization, Magnetic Property, and Electrochemical Performance in Lithium-Ion Batteries
  195. Discharge mechanism of MoS2 for sodium ion battery: Electrochemical measurements and characterization
  196. High capacity spherical Li[Li0.24Mn0.55Co0.14Ni0.07]O2 cathode material for lithium ion batteries
  197. Direct electrosynthesis of poly-o-phenylenediamine bulk materials for supercapacitor application
  198. Self-made non-enzymatic silver electrode from recordable CDs for fast detection of glucose in blood
  199. Determination of alkylamine carbonate nonionic–anion oil displacement agent in oil-field water using HPLC after derivatization with 4-methoxybenzenesulfonyl fluoride
  200. SnO2@graphene nanocomposites as anode materials for Na-ion batteries with superior electrochemical performance
  201. Octahedral tin dioxide nanocrystals as high capacity anode materials for Na-ion batteries
  202. Novel cysteic acid/reduced graphene oxide composite film modified electrode for the selective detection of trace silver ions in natural waters
  203. Determination of glyphosate and aminomethylphosphonic acid in soybean samples by high performance liquid chromatography using a novel fluorescent labeling reagent
  204. Mesoporous graphene paper immobilised sulfur as a flexible electrode for lithium–sulfur batteries
  205. Hydrothermal synthesis of α-MnO2 and β-MnO2 nanorods as high capacity cathode materials for sodium ion batteries
  206. High capacity cathode materials for Li–S batteries
  207. Coral-like V2O5 nanowhiskers as high-capacity cathode materials for lithium-ion batteries
  208. Electrochemical Properties and Discharge Mechanism of Na/TiS2 Cells with Liquid Electrolyte at Room Temperature
  209. ChemInform Abstract: Wintersweet-Flower-Like CoFe2O4/MWCNTs Hybrid Material for High-Capacity Reversible Lithium Storage.
  210. Mesoporous NiO crystals with dominantly exposed {110} reactive facets for ultrafast lithium storage
  211. Label-free impedimetric immunosensor for sensitive detection of 2,4-dichlorophenoxybutyric acid (2,4-DB) in soybean
  212. Controlled Size and Shape of Graphene and Its Application in Li-ion Battery
  213. Chemical-free synthesis of graphene–carbon nanotube hybrid materials for reversible lithium storage in lithium-ion batteries
  214. Electrochemical properties of all solid state Li/S battery
  215. Microwave hydrothermal synthesis of high performance tin–graphene nanocomposites for lithium ion batteries
  216. Sulfonation of graphene nanosheet-supported platinum via a simple thermal-treatment toward its oxygen reduction activity in acid medium
  217. ChemInform Abstract: Mesoporous Nickel Oxide Nanowires: Hydrothermal Synthesis, Characterization and Applications for Lithium-Ion Batteries and Supercapacitors with Superior Performance.
  218. Preparation and Enhanced Electrochemical Performance of MnO2Nanosheets for Supercapacitors
  219. Evaluation of Sulfur and Multi-Walled Carbon Nanotube Composite Synthesized by Dissolution and Precipitation for Li/S Batteries
  220. Nanocomposites of CoO and a mesoporous carbon (CMK-3) as a high performance cathode catalyst for lithium-oxygen batteries
  221. Consideration of Critical Axial Properties of Pristine and Defected Carbon Nanotubes Under Compression
  222. Highly Ordered Mesoporous MoS2 with Expanded Spacing of the (002) Crystal Plane for Ultrafast Lithium Ion Storage
  223. Wintersweet‐Flower‐Like CoFe 2 O 4 /MWCNTs Hybrid Material for High‐Capacity Reversible Lithium Storage
  224. Mesoporous Nickel Oxide Nanowires: Hydrothermal Synthesis, Characterisation and Applications for Lithium-Ion Batteries and Supercapacitors with Superior Performance
  225. Glycothermal synthesis of assembled vanadium oxide nanostructures for gas sensing
  226. Superior Electrochemical Performance of Sulfur/Graphene Nanocomposite Material for High‐Capacity Lithium–Sulfur Batteries
  227. ChemInform Abstract: Polyhedral Magnetite Nanocrystals with Multiple Facets: Facile Synthesis, Structural Modelling, Magnetic Properties and Application for High Capacity Lithium Storage.
  228. Enhance electrochemical performance of lithium sulfur battery through a solution-based processing technique
  229. Consideration of Bending and Buckling Behaviors of Monolayer and Multilayer Graphene Sheets
  230. Graphene nanosheets as cathode catalysts for lithium-air batteries with an enhanced electrochemical performance
  231. Practical Molecular Dynamic Simulation of Monolayer Graphene with Consideration of Structural Defects
  232. Synthesis of tuneable porous hematites (α-Fe2O3) for gas sensing and lithium storage in lithium ion batteries
  233. Hollow CoFe 2 O 4 nanospheres as a high capacity anode material for lithium ion batteries
  234. Highly ordered mesoporous Cr2O3materials with enhanced performance for gas sensors and lithium ion batteries
  235. Nanocomposites of hematite (α-Fe2O3) nanospindles with crumpled reduced graphene oxide nanosheets as high-performance anode material for lithium-ion batteries
  236. An ordered mesoporous WS2 anode material with superior electrochemical performance for lithium ion batteries
  237. Solvothermal synthesis of CoS2–graphene nanocomposite material for high-performance supercapacitors
  238. Graphene-supported SnO2 nanoparticles prepared by a solvothermal approach for an enhanced electrochemical performance in lithium-ion batteries
  239. LiNi0.4Co0.3Mn0.3O2 thin film electrode by aerosol deposition
  240. Preface
  241. Polyhedral Magnetite Nanocrystals with Multiple Facets: Facile Synthesis, Structural Modelling, Magnetic Properties and Application for High Capacity Lithium Storage
  242. Ab initio calculations on Li-ion migration in Li2FeSiO4 cathode material with a P21 symmetry structure
  243. Synthesis and electrochemical performance of LiMnxFex−1PO4/C cathode material for lithium secondary batteries
  244. Cocore–Ptshell nanoparticles as cathode catalyst for PEM fuel cells
  245. Electrochemical properties of Na/Ni3S2 cells with liquid electrolytes using various sodium salts
  246. In situ synthesis of Co3O4/graphene nanocomposite material for lithium-ion batteries and supercapacitors with high capacity and supercapacitance
  247. Discharge reaction mechanism of room-temperature sodium–sulfur battery with tetra ethylene glycol dimethyl ether liquid electrolyte
  248. The influence of compositional change of 0.3Li2MnO3·0.7LiMn1−xNiyCo0.1O2 (0.2≤x≤0.5, y=x−0.1) cathode materials prepared by co-precipitation
  249. MnO/C core–shell nanorods as high capacity anode materials for lithium-ion batteries
  250. Acid Treatment of Carbon Supports for Proton Exchange Membrane Fuel Cell Electrocatalyst
  251. Interface interaction within nanopores in thin films of an amphiphilic block copolymer and CTAB
  252. ChemInform Abstract: Mesoporous LiFePO4/C Nanocomposite Cathode Materials for High Power Lithium Ion Batteries with Superior Performance.
  253. Advanced mechanical properties of graphene paper
  254. Highly ordered mesoporous NiO anode material for lithium ion batteries with an excellent electrochemical performance
  255. Morphology control and electrochemical properties of nanosize LiFePO4 cathode material synthesized by co-precipitation combined with in situ polymerization
  256. Pt/C Catalysts Using Different Carbon Supports for the Cathode of PEM Fuel Cells
  257. The addition of iron to Ni3S2 electrode for sodium secondary battery
  258. Synthesis of Mesoporous α-Fe2O3Nanostructures for Highly Sensitive Gas Sensors and High Capacity Anode Materials in Lithium Ion Batteries
  259. Molecular dynamic investigation of length dependency of single-walled carbon nanotube
  260. Pt1−xCox nanoparticles as cathode catalyst for proton exchange membrane fuel cells with enhanced catalytic activity
  261. Electronic structure and thermoelectric properties of Bi2Te3 crystals and graphene-doped Bi2Te3
  262. The electrochemical properties of Li/TEGDME/MoS2 cells using multi-wall carbon nanotubes as a conducting agent
  263. Mesoporous LiFePO4/C Nanocomposite Cathode Materials for High Power Lithium Ion Batteries with Superior Performance
  264. Effect of Topological Defects on Buckling Behavior of Single-walled Carbon Nanotube
  265. Mn3O4 nanoparticles embedded into graphene nanosheets: Preparation, characterization, and electrochemical properties for supercapacitors
  266. PREFACE
  267. Hydrothermally Processed Oxide Nanostructures and Their Lithium–ion Storage Properties
  268. Determination of Glyphosate and Aminomethylphosphonic Acid in Water by LC Using a New Labeling Reagent, 4-Methoxybenzenesulfonyl Fluoride
  269. Highly Ordered Mesoporous Cobalt Oxide Nanostructures: Synthesis, Characterisation, Magnetic Properties, and Applications for Electrochemical Energy Devices
  270. Synthesis and properties of Ti–O based nanowires
  271. A facile single-source approach to urchin-like NiS nanostructures
  272. Ni@Pt core–shell nanoparticles with enhanced catalytic activity for oxygen reduction reaction
  273. Novel reagents for quantitative analysis of valiolamine in biological samples by high-performance liquid chromatography with pre-column UV derivatization
  274. Chemical processing of double-walled carbon nanotubes for enhanced hydrogen storage
  275. Nanosize SnO2 for Highly Responsive Gas Sensor Application
  276. Synthesis of CdSe microspheres via solvothermal process in a mixed solution
  277. Molecular dynamic investigation of mechanical properties of armchair and zigzag double-walled carbon nanotubes under various loading conditions
  278. Preface
  279. Large-scale synthesis and gas sensing application of vertically aligned and double-sided tungsten oxide nanorod arrays
  280. Consideration of mechanical properties of single-walled carbon nanotubes under various loading conditions
  281. Solvothermal Synthesis of Ternary Sulfides of Sb2 − x Bi x S3 (x = 0.4, 1) with 3D Flower-Like Architectures
  282. Room-temperature solution synthesis of Bi 2 O 3 nanowires for gas sensing application
  283. First-principles study on the enhancement of lithium storage capacity in boron doped graphene
  284. Highly efficient and large-scale synthesis of graphene by electrolytic exfoliation
  285. Highly flexible and bendable free-standing thin film polymer for battery application
  286. One-pot facile synthesis of iron oxide nanowires as high capacity anode materials for lithium ion batteries
  287. PtxNi alloy nanoparticles as cathode catalyst for PEM fuel cells with enhanced catalytic activity
  288. In situ chemical synthesis of SnO2–graphene nanocomposite as anode materials for lithium-ion batteries
  289. Electrochemical properties of SnO2 nanowires prepared by a simple heat treatment of Sn–Ag alloys
  290. Graphene nanosheets for enhanced lithium storage in lithium ion batteries
  291. Controlled synthesis and characterization of ZnSe nanostructures via a solvothermal approach in a mixed solution
  292. One-dimensional nanostructures as electrode materials for lithium-ion batteries with improved electrochemical performance
  293. Synthesis and characterisation of hydrophilic and organophilic graphene nanosheets
  294. The spin–orbit interaction enhanced terahertz absorption in graphene around the K point
  295. Hydrothermal Synthesis and Optical, Magnetic, and Supercapacitance Properties of Nanoporous Cobalt Oxide Nanorods
  296. Facile synthesis of tin oxide nanofibres
  297. Hydrothermal synthesis of carbon nanotube/cobalt oxide core-shell one-dimensional nanocomposite and application as an anode material for lithium-ion batteries
  298. Solvothermal synthesis and gas-sensing performance of Co3O4 hollow nanospheres
  299. BENDING STABILITY OF INNER AND OUTER TUBES OF DOUBLE-WALLED CARBON NANOTUBE
  300. Electrochemical Performance of Nanocrystalline SnO2-Carbon Nanotube Composites as Anode in Lithium-Ion Cells
  301. Electrochemical performance of α-Fe2O3 nanorods as anode material for lithium-ion cells
  302. Growth, Characterization and Technological Applications of Semiconductor SnO2 Nanotubes and In2O3 Nanowires
  303. Nanostructured Metal Oxides as Electrode Materials for Electrochemical Capacitors
  304. Synthesis of nanosized vanadium pentoxide/carbon composites by spray pyrolysis for electrochemical capacitor application
  305. Sn/graphene nanocomposite with 3D architecture for enhanced reversible lithium storage in lithium ion batteries
  306. Synthesis of enhanced hydrophilic and hydrophobic graphene oxide nanosheets by a solvothermal method
  307. Comparative consideration of axial stability of single- and double-walled carbon nanotube and its inner and outer tubes
  308. Magnetite/carbon core-shell nanorods as anode materials for lithium-ion batteries
  309. Paper-like free-standing polypyrrole and polypyrrole–LiFePO4 composite films for flexible and bendable rechargeable battery
  310. Strong photon-mixing of terahertz waves in semiconductor quantum wells induced by Rashba spin–orbit coupling
  311. Facile Synthesis and Characterization of Iron Oxide Semiconductor Nanowires for Gas Sensing Application
  312. Solvothermal synthesis and characterization of ZnSe nanoplates
  313. Flutelike Porous Hematite Nanorods and Branched Nanostructures: Synthesis, Characterisation and Application for Gas‐Sensing
  314. Facile Synthesis and Characterization of Gallium Oxide (β-Ga2O3) 1D Nanostructures: Nanowires, Nanoribbons, and Nanosheets
  315. Facile Synthesis and Characterization of Graphene Nanosheets
  316. Synthesis and high gas sensitivity of tin oxide nanotubes
  317. Electrochemical studies on LiFe1−xCoxPO4/carbon composite cathode materials synthesized by citrate gel technique for lithium-ion batteries
  318. Monodisperse hematite porous nanospheres: synthesis, characterization, and applications for gas sensors
  319. The Effect of Morphological Modification on the Electrochemical Properties of SnO2 Nanomaterials
  320. Chemical synthesis, characterisation and gas sensing performance of copper oxide nanoribbons
  321. Effects of low-temperature carbon encapsulation on the electrochemical performance of SnO2 nanopowders
  322. Electrochemical performance of LiFePO4 cathode material coated with ZrO2 nanolayer
  323. Ionic conductivity and electrochemical stability of poly(methylmethacrylate)–poly(ethylene oxide) blend-ceramic fillers composites
  324. Preparation of Low Loading Pt/C Catalyst by Carbon Xerogel Method for Ethanol Electrooxidation
  325. Synthesis and electrochemical performance of doped LiCoO2 materials
  326. Synthesis and characterization of SrBi4Ti4O15ferroelectric filler based composite polymer electrolytes for lithium ion batteries
  327. Nanostructured nickel sulfide synthesized via a polyol route as a cathode material for the rechargeable lithium battery
  328. Synthesis, Characterization, and Optical Properties of In 2 O 3 Semiconductor Nanowires
  329. Nanostructured SnSb/Carbon Nanotube Composites Synthesized by Reductive Precipitation for Lithium-Ion Batteries
  330. Preparation and Electrochemical Properties of SnO2 Nanowires for Application in Lithium-Ion Batteries
  331. Characterization of Nanosize Molybdenum Trisulfide for Lithium Batteries and MoS[sub 3] Structure Confirmation via Electrochemistry
  332. Mesoporous organo-silica nanoarray for energy storage media
  333. Characterisation of olivine-type LiMnxFe1−xPO4 cathode materials
  334. Electron Transfer Behavior of Monolayer Protected Nanoclusters and Nanowires of Silver and Gold
  335. Synthesis of vanadium pentoxide powders with enhanced surface-area for electrochemical capacitors
  336. Mössbauer study on LiFePO4 cathode material for lithium ion batteries
  337. A study on LiFePO4 and its doped derivatives as cathode materials for lithium-ion batteries
  338. Nanostructured PbO materials obtained in situ by spray solution technique for Li-ion batteries
  339. Synthesis and characterization of nanosize cobalt sulfide for rechargeable lithium batteries
  340. Synthesis of NiO nanotubes for use as negative electrodes in lithium ion batteries
  341. Electrochemical properties of Si thin film prepared by pulsed laser deposition for lithium ion micro-batteries
  342. Sulphur-polypyrrole composite positive electrode materials for rechargeable lithium batteries
  343. Synthesis and characterization of one-dimensional CdSe nanostructures
  344. A new rapid synthesis technique for electrochemically active materials used in energy storage applications
  345. Electrochemical properties of carbon nanotube-dispersed PEO-LiX electrolytes
  346. Synthesis of functional oxides by a novel mechanical milling–electric discharge method
  347. Electro-Oxidation of Ethanol on Pt-WO[sub 3]∕C Electrocatalyst
  348. Electrochemical Performance of Co[sub 3]O[sub 4]–C Composite Anode Materials
  349. Nanomaterials for Lithium-ion Rechargeable Batteries
  350. Synthesis and Characterization of LiFePO[sub 4] and LiTi[sub 0.01]Fe[sub 0.99]PO[sub 4] Cathode Materials
  351. Electrochemical and magnetic characterization of LiFePO4 and Li0.95Mg0.05FePO4 cathode materials
  352. Single wall carbon nanotube paper as anode for lithium-ion battery
  353. Electrochemical performance of SnSb and Sn/SnSb nanosize powders as anode materials in Li-ion cells
  354. An investigation of polypyrrole-LiFePO4 composite cathode materials for lithium-ion batteries
  355. Electrochemical properties of carbon coated LiFePO4 cathode materials
  356. Nano-structured SnO2-carbon composites obtained by in situ spray pyrolysis method as anodes in lithium batteries
  357. Synthesis of nanocrystalline transition metal and oxides for lithium storage
  358. An investigation on electrochemical behavior of nanosize zinc sulfide electrode in lithium-ion cells
  359. Li Storage Properties of Ag and SnO 2 Nanopowders Synthesized from Reverse Micelles
  360. A novel cureless pure lead oxide plate for valve-regulated lead-acid batteries
  361. Electrochemical characteristics of tin-coated MCMB graphite as anode in Lithium-ion cells
  362. Investigation of Fe valence in LiFePO4 by Mössbauer and XANES spectroscopic techniques
  363. New approach for synthesis of carbon-mixed LiFePO4 cathode materials
  364. Physical and electrochemical properties of doped lithium iron phosphate electrodes
  365. Preparation and properties of spherical LiNi0.75Co0.25O2 as a cathode for lithium-ion batteries
  366. Nanostructured Si–C composite anodes for lithium-ion batteries
  367. Conductivity improvements to spray-produced LiFePO4 by addition of a carbon source
  368. Electrochemical and in situ synchrotron X-ray diffraction studies of Li[Li0.3Cr0.1Mn0.6]O2 cathode materials
  369. Electrochemical properties of nanosize Sn-coated graphite anodes in lithium-ion cells
  370. Characterization of LiM[sub x]Fe[sub 1−x]PO[sub 4] (M=Mg, Zr, Ti) Cathode Materials Prepared by the Sol-Gel Method
  371. Characterization of Nanocrystalline Si-MCMB Composite Anode Materials
  372. Tungsten Disulfide Nanotubes for Lithium Storage
  373. LiTi2(PO4)3 with NASICON-type structure as lithium-storage materials
  374. Al-based anode materials for Li-ion batteries
  375. Multiple-ion-doped lithium nickel oxides as cathode materials for lithium-ion batteries
  376. Nanoparticle-dispersed PEO polymer electrolytes for Li batteries
  377. Preparation and characterization of carbon nanotubes for energy storage
  378. Preparation of orthorhombic LiMnO2 material via the sol–gel process
  379. Stoichiometry-controlled high-performance LiCoO2 electrode materials prepared by a spray solution technique
  380. Synthesis and characterization of LiCoxMnyNi1−x−yO2 as a cathode material for secondary lithium batteries
  381. Tin-based composite materials as anode materials for Li-ion batteries
  382. Electrochemical studies of graphitized mesocarbon microbeads as an anode in lithium-ion cells
  383. Structure and electrochemical characteristics of LiMn0.7M0.3O2 (M=Ti, V, Zn, Mo, Co, Mg, Cr)
  384. Electrochemical properties of orthorhombic LiMnO2 prepared by one-step middle-temperature solid-state reaction
  385. Li Storage Properties of Carbon Nanotubes Prepared by Chemical Vapour Deposition
  386. Structure and electrochemistry of LiCrxMn1−xO2 cathode for lithium-ion batteries
  387. Investigation of cobalt oxides as anode materials for Li-ion batteries
  388. Nanosize cobalt oxides as anode materials for lithium-ion batteries
  389. A new process for fabrication of metal-hydride electrodes for nickel–metal hydride batteries
  390. Lithium Storage Properties of Ball Milled Ni-57 mass%Sn Alloy
  391. Synthesis of Layered-Structure LiMn[sub 1−x]Cr[sub x]O[sub 2] by the Pechini Method and Characterization as a Cathode for Rechargeable Li/LiMnO[sub 2] Cells
  392. Electrochemical performance of nanocrystalline lead oxide in VRLA batteries
  393. Graphite–Tin composites as anode materials for lithium-ion batteries
  394. Physical and electrochemical characterization of LiNi0.8Co0.2O2 thin-film electrodes deposited by laser ablation
  395. Innovative nanosize lithium storage alloys with silica as active centre
  396. Nanocrystalline NiSi alloy as an anode material for lithium-ion batteries
  397. Lithium storage properties of nanocrystalline eta-Cu6Sn5 alloys prepared by ball-milling
  398. Structural, physical and electrochemical characterisation of LiNixCo1−xO2 solid solutions
  399. Spinel Li[Li1/3Ti5/3]O4 as an anode material for lithium ion batteries
  400. Structure characterisation and lithium insertion in La0.33NbO3 perovskite
  401. Improvement of electrochemical properties of the spinel LiMn2O4 using a Cr dopant effect
  402. LiAlδNi1−δO2 solid solutions as cathodic materials for rechargeable lithium batteries
  403. Synthesis and characterization of LiNiO2 compounds as cathodes for rechargeable lithium batteries
  404. Secondary aqueous lithium-ion batteries with spinel anodes and cathodes
  405. Structural and electrochemical characteristics of Li/sub 1+x/Mn/sub 2+x/O/sub 4/ and LiMn/sub 2/O/sub 4-δ/ for secondary lithium batteries