All Stories

  1. Tribological Response of δ-Bi2O3 Coatings Deposited by RF Magnetron Sputtering
  2. ZnO nanoparticles-modified polycaprolactone-gelatin membranes for guided/bone tissue regeneration, antibacterial and osteogenic differentiation properties
  3. Evaluation of the Biocompatibility and Osteogenic Properties of Metal Oxide Coatings Applied by Magnetron Sputtering as Potential Biofunctional Surface Modifications for Orthopedic Implants
  4. Degradation Behavior and Mechanical Integrity of a Mg-0.7Zn-0.6Ca (wt.%) Alloy: Effect of Grain Sizes and Crystallographic Texture
  5. Synergistic photocatalytic effect of BiOBr–BiOI heterojunctions due to appropriate layer stacking
  6. Cathodic Arc Evaporation of Self-Lubricating TiSiVN Coatings
  7. Bismuth subsalicylate incorporated in polycaprolactone-gelatin membranes by electrospinning to prevent bacterial colonization
  8. Improving the corrosion resistance of aluminum alloy (AA7075) using amorphous chromium oxide coatings
  9. Structural stabilization and ionic conductivity of bismuth niobium oxide films with fluorite-like structure
  10. Synthesis of a CeO2/Co3O4 catalyst with a remarkable performance for the soot oxidation reaction
  11. Structure, mechanical properties and corrosion resistance of amorphous Ti-Cr-O coatings
  12. Synthesis of Bi2SiO5 thin films by confocal dual magnetron sputtering-annealing route
  13. Good practices for reporting the photocatalytic evaluation of a visible-light active semiconductor: Bi2O3, a case study
  14. Evaluation of the Photocatalytic Activity of Copper Doped TiO2 nanoparticles for the Purification and/or Disinfection of Industrial Effluents
  15. Dependence of the photoactivity of CdS prepared in Butanol-Ethylenediamine mixture in function of different Sacrificial Electron Donors
  16. Stabilized β-Bi2O3 nanoparticles from (BiO)4CO3(OH)2 precursor and their photocatalytic properties under Blue Light
  17. Effect of the addition of Si into V 2 O 5 coatings: Structure and tribo-mechanical properties
  18. Fabrication of Sputtered Ce/La, La/Ce Oxide Bilayers on AA6061 and AA7075 Aluminum Alloys for the Development of Corrosion Protective Coatings
  19. Synergistic effect of supported ZnO/Bi 2 O 3 heterojunctions for photocatalysis under visible light
  20. The bismuth oxyhalide family: thin film synthesis and periodic properties
  21. High stability and ac-conductivity of cubic fluorite-Bi 2 O 3 films synthesized by magnetron sputtering
  22. Evaluation of the photodiscoloration efficiency of β-Bi 2 O 3 films deposited on different substrates by pneumatic spray pyrolysis
  23. Optical properties of nanocrystalline La 2 O 3 dielectric films deposited by radio frequency magnetron sputtering
  24. Preferential orientation in bismuth thin films as a function of growth conditions
  25. Synthesis and properties of Bi5Nb3O15 thin films prepared by dual co-sputtering
  26. Comparison of the biological response between crystalline and amorphous titanium oxide coatings
  27. The effect of simulated inflammatory conditions on the surface properties of titanium and stainless steel and their importance as biomaterials
  28. Photocatalytic discoloration of methyl orange dye by δ-Bi2O3 thin films
  29. Polymer-based composite with outstanding mechanically tunable refractive index
  30. Efficient α/β-Bi2O3 composite for the sequential photodegradation of two-dyes mixture
  31. Photocatalytic activity of enlarged microrods of α-Bi 2 O 3 produced using ethylenediamine-solvent
  32. Effect of the addition of Si into Nb2O5 coatings on their structural, optical, and mechanical properties
  33. Sputtered bismuth oxide thin films as a potential photocatalytic material
  34. Effect of the KOH chemical treatment on the optical and photocatalytic properties of BiVO4 thin films
  35. Reduction of the coefficient of friction of niobium nitride coatings by the addition of bismuth
  36. Effect of Si addition on the structure and corrosion behavior of NbN thin films deposited by unbalanced magnetron sputtering
  37. Biomedical coatings prepared by magnetron sputtering
  38. The atomic ordering and its correlation to protein adsorption on biocompatible metal oxide coatings
  39. Can surface roughness induce osteoblasts differentiation independently of the type of material? Comparison between metals, ceramic and polymers.
  40. Effects of atomic ordering of zirconium oxide nanomodification on stem cell differentiation and bacterial adhesion
  41. Study of surface phenomena on titanium and its oxides due to its treatment with hydrogen peroxide
  42. Bacterial adhesion on amorphous and crystalline metal oxide coatings
  43. Antibacterial effect of bismuth subsalicylate nanoparticles synthesized by laser ablation
  44. Photomechanical response of composites based on PDMS and carbon soot nanoparticles under IR laser irradiation
  45. Role of integrin subunits in mesenchymal stem cell differentiation and osteoblast maturation on graphitic carbon-coated microstructured surfaces
  46. Opto-electronic properties of bismuth oxide films presenting different crystallographic phases
  47. Spray deposited β-Bi2O3 nanostructured films with visible photocatalytic activity for solar water treatment
  48. Chemically induced porosity on BiVO4 films produced by double magnetron sputtering to enhance the photo-electrochemical response
  49. Optimal conditions for the deposition of novel anticorrosive coatings by RF magnetron sputtering for aluminum alloy AA6082
  50. Physicochemical Characterization of Photocatalytic Materials
  51. Structural, chemical, optical and mechanical properties of Au doped AlN sputtered coatings
  52. TiO2Sensitization with Bi2S3Quantum Dots: The Inconvenience of Sodium Ions in the Deposition Procedure
  53. Nano sized bismuth oxy chloride by metal organic chemical vapour deposition
  54. TaSiN nanocomposite thin films: Correlation between structure, chemical composition, and physical properties
  55. Preliminary Tribological Study and Tool Life of Four Commercial Drills
  56. Stabilization of the delta-phase in Bi2O3 thin films
  57. A comparative study of fibrinogen adsorption onto metal oxide thin films
  58. An overview of protein adsorption on metal oxide coatings for biomedical implants
  59. Influence of Surface Pre-Treatment On Electrochemical Properties of CeO2 thin Films Deposited by R.F. Sputtering On AA7075 Aluminum Alloy
  60. Corrosion resistant coatings for dental implants
  61. Electrical and optical properties of Ta-Si-N thin films deposited by reactive magnetron sputtering
  62. Pulsed laser deposition and characterization of La1−xSrxMnO3
  63. Influence of the ion energy on the structure of Bi and Fe2O3 thin films
  64. Effect of 8MeV Si ions irradiation and thermal annealing in ZnO thin films
  65. A Detailed Study of the Synthesis of Bismuth Thin Films by PVD-Methods and their Structural Characterization
  66. Sputtered Bismuth thin films as trace metal electrochemical sensors
  67. A look into the interaction of metal oxide thin films with biological media: Albumin and Fibrinogen adsorption
  68. Albumin adsorption on oxide thin films studied by spectroscopic ellipsometry
  69. Biocompatibility of Niobium Coatings
  70. Amorphous Carbon Gold Nanocomposite Thin Films: Structural and Spectro-ellipsometric Analysis
  71. Niobium based coatings for dental implants
  72. Amorphous niobium oxide thin films
  73. Protein Adsorption on Amorphous Metal Oxide Thin Films: An FTIR/ATR and Ellipsometry study
  74. Oral bacterial adhesion on amorphous carbon and titanium films: Effect of surface roughness and culture media
  75. XPS and EIS studies of sputtered Al–Ce films formed on AA6061 aluminum alloy in 3.5% NaCl solution
  76. Deposition of amorphous carbon–silver composites
  77. Effective corrosion protection of AA6061 aluminum alloy by sputtered Al–Ce coatings
  78. Structural and electrochemical performance of sputtered Al–Ce films on AA6061 aluminum alloy substrates
  79. Corrosion behavior of amorphous carbon deposit in 0.89% NaCl by electrochemical impedance spectroscopy
  80. Oral bacterial adhesion on amorphous carbon films
  81. Synthesis and Characterization of Chromate Conversion Coatings on GALVALUME and Galvanized Steel Substrates
  82. Biocompatibility and Anti-microbial Properties of Silver Modified Amorphous Carbon Films
  83. Biocompatibility and bio-corrosion resistance of amorphous oxide thin films
  84. The preparation of permalloy 80/20 thin films using a pulsed DC discharge in a hollow cathode
  85. Superconducting niobium nitride films deposited by unbalanced magnetron sputtering
  86. Comparative study of niobium nitride coatings deposited by unbalanced and balanced magnetron sputtering
  87. Comparison and semiconductor properties of nitrogen doped carbon thin films grown by different techniques
  88. Evolution of the opto-electronic properties of amorphous carbon films as a function of nitrogen incorporation
  89. Osteoinduction properties of graphite-like amorphous carbon films evaluated in-vitro
  90. An alternative procedure for the determination of the optical band gap and thickness of amorphous carbon nitride thin films
  91. The influence of the magnetic field configuration on plasma parameters and microstructure of niobium nitride films
  92. Influence of the ion–atom flux ratio on the mechanical properties of chromium nitride thin films
  93. Status of technology of carbon nitride films: challenges and opportunties
  94. Osteoblasts attachment on amorphous carbon films
  95. Unbalanced magnetic field configuration: plasma and film properties
  96. Corrosion behaviour of TaN thin PVD films on steels
  97. Influence of the energy parameter on the microstructure of chromium nitride coatings
  98. Infrared spectra of amorphous carbon based materials
  99. Growth and characterisation of polymeric amorphous carbon and carbon nitride films from propane
  100. Comparative study of chromium nitride coatings deposited by unbalanced and balanced magnetron sputtering
  101. Bonding characteristics of DC magnetron sputtered B–C–N thin films investigated by Fourier-transformed infrared spectroscopy and X-ray photoelectron spectroscopy
  102. Optical properties of TiO2-x thin films studied by spectroscopic ellipsometry: substrate temperature effect
  103. Bonding in amorphous carbon nitride
  104. Deposition of ta-C:N:H as Function of Experimental Parameters
  105. In vitro studies of the biomineralization in amorphous carbon films
  106. Paramagnetic defects in hydrogenated amorphous carbon powders
  107. Erratum to “Highest optical gap tetrahedral amorphous carbon”
  108. Erratum to “Is stress necessary to stabilise sp3 bonding in diamond-like carbon”
  109. Optical gap in carbon nitride films
  110. Studies of pulsed high-current arcs used to prepare carbon films
  111. a-C thin film deposition by laser ablation
  112. Interpretation of infrared and Raman spectra of amorphous carbon nitrides
  113. Gas evolution studies for structural characterization of hydrogenated carbon nitride samples
  114. Properties of carbon films and their biocompatibility using in-vitro tests
  115. Resonant Raman spectra of amorphous carbon nitrides: the G peak dispersion
  116. Infrared spectra of carbon nitride films
  117. Highest optical gap tetrahedral amorphous carbon
  118. Is stress necessary to stabilise sp3 bonding in diamond-like carbon?
  119. Role of sp2 phase in field emission from nanostructured carbons
  120. Raman and infrared modes of hydrogenated amorphous carbon nitride
  121. Chemical sputtering of ta-C: Implications for the deposition of carbon nitride
  122. Effect of graphitic inclusions on the optical gap of tetrahedral amorphous carbon films
  123. Hydrogen and disorder in diamond-like carbon
  124. Dual ion plasma-beam sources used to maximise sp3 C–C bonds in carbon nitride
  125. Density,sp3fraction, and cross-sectional structure of amorphous carbon films determined by x-ray reflectivity and electron energy-loss spectroscopy
  126. Maximized sp3 bonding in carbon nitride phases
  127. Deposition of carbon nitride films using an electron cyclotron wave resonance plasma source
  128. Nitrogen Incorporation into Tetrahedral Hydrogenated Amorphous Carbon
  129. The Preparation, Characterization and Tribological Properties of TA-C:H Deposited Using an Electron Cyclotron Wave Resonance Plasma Beam Source
  130. Production and characterisation of carbon nitride thin films produced by a graphite hollow cathode system
  131. Biocompatibility, Cytotoxicity and Bioactivity of Amorphous Carbon Films