All Stories

  1. Influence of clinical use on physical-structural surface properties and electrochemical potential of NiTi endodontic instruments
  2. Mechanical Properties of Nanoceramic Zirconia Coatings on NiTi Orthodontic Wires
  3. Impact of Heat Treatments on the Fatigue Resistance of Different Rotary Nickel-titanium Instruments
  4. The influence of internal oxidation during decarburization of a grain oriented silicon steel on the morphology of the glass film formed at high temperature annealing
  5. Mechanical behavior of three nickel-titanium rotary files: A comparison of numerical simulation with bending and torsion tests
  6. Mechanical behavior of M-Wire and conventional NiTi wire used to manufacture rotary endodontic instruments
  7. Comparison of the Mechanical Behavior between Controlled Memory and Superelastic Nickel-Titanium Files via Finite Element Analysis
  8. Microstructural and topographic characterization of concrete protected by acrylic paint
  9. Flexibility and torsional behaviour of rotary nickel-titanium PathFile, RaCe ISO 10, Scout RaCe and stainless steel K-File hand instruments
  10. The influence of simulated clinical use on the flexibility of rotary ProTaper Universal, K3 and EndoSequence nickel–titanium instruments
  11. The effect of chemical composition on selective oxidation of bake hardenable steel
  12. An analytical mechanical model to describe the response of NiTi rotary endodontic files in a curved root canal
  13. Cleaning the apical third of curved canals after different irrigation protocols
  14. Effect of Lateral Pressure Motion on the Torsional Behavior of Rotary ProTaper Universal Instruments
  15. Selective oxidation of dual phase steel after annealing at different dew points
  16. Relationship between flexibility and physical, chemical, and geometric characteristics of rotary nickel-titanium instruments
  17. Flexural Fatigue and Torsional Resistance of ProFile GT and ProFile GT Series X Instruments
  18. Comparison between the Flexibility of Three Different Types of Rotary NiTi Endodontic Instruments
  19. Fatigue Life Curves of NiTi Alloys – The Z Effect
  20. The Influence of Cyclic Straining in Torsion on Fatigue Resistance and Torsional Properties of ProTaper NiTi Endodontic Instruments
  21. Geometric and dimensional characteristics of simulated curved canals prepared with proTaper instruments
  22. The chemical and mechanical characteristics of thermally aged interference thin films on stainless steel
  23. Flexibility and Torsional Strength of ProTaper and ProTaper Universal Rotary Instruments Assessed by Mechanical Tests
  24. Characterization of interference thin films grown on stainless steel surface by alternate pulse current in a sulphochromic solution
  25. Characterization of a new solid lipid nanoparticle formulation containing retinoic acid for topical treatment of acne
  26. Adhesiveness of cold rolled steels for car body parts
  27. RESISTÊNCIA À CORROSÃO DE AÇOS ELETROGALVANIZADOS FOSFATIZADOS E PINTADOS
  28. Mechanical properties of interference thin films on colored stainless steel evaluated by depth-sensing nanoindentation
  29. The effect of sodium hypochlorite on the surface characteristics and fatigue resistance of ProFile nickel-titanium instruments
  30. Influence of simulated clinical use on the torsional behavior of nickel-titanium rotary endodontic instruments
  31. VARIAÇÃO DAS PERDAS MAGNÉTICAS DURANTE ENVELHECIMENTO DE UM AÇO ELÉTRICO
  32. CURVAS DE VIDA EM FADIGA DE BAIXO CICLO DE LIGAS SUPERELÁSTICAS DE NiTi
  33. Decrease in the fatigue resistance of nickel-titanium rotary instruments after clinical use in curved root canals
  34. Decarburization Kinetics during Annealing of a Semi-processed Electrical Steel
  35. Optimization of the strain aging resistance in aluminum killed steels produced by continuous annealing
  36. Measurement of Dynamic Strain Aging in Pearlitic Steels by Tensile Test.
  37. Hydrothermal synthesis and sintering of electroceramics
  38. Hydrothermal synthesis and sintering of nickel and manganese-zinc ferrites
  39. Influence of hydrothermal powder morphology on the sintered microstructure of MnZn ferrites