All Stories

  1. Focused Ion Beam induced hydride formation does not affect Fe, Ni, Cr-clusters in irradiated Zircaloy-2

    Article • Journal of Nuclear Materials, August 2023, Elsevier

    Dr Mattias Thuvander

  2. Performance and evolution of cold spray Cr-coated optimized ZIRLO™ claddings under simulated loss-of-coolant accident conditions

    Article • Journal of Nuclear Materials, April 2023, Elsevier

    Dr Mattias Thuvander

  3. Effect of Ce addition on microstructure, thermal and mechanical properties of Al-Si alloys

    Article • Materials Today Communications, March 2023, Elsevier

    Dr Mattias Thuvander

  4. Cu precipitation in electron-irradiated iron alloys for spent-fuel canisters

    Article • Journal of Nuclear Materials, December 2022, Elsevier

    Dr Mattias Thuvander

  5. Comparing CrN and TiN Coatings for Accident-Tolerant Fuels in PWR and BWR Autoclaves

    Article • Journal of Nuclear Engineering, November 2022, MDPI AG

    Dr Mattias Thuvander

  6. Carbide Precipitation during Processing of Two Low-Alloyed Martensitic Tool Steels with 0.11 and 0.17 V/Mo Ratios Studied by Neutron Scattering, Electron Microscopy and Atom Probe

    Article • Metals, April 2022, MDPI AG

    Dr Mattias Thuvander

  7. Post-irradiation annealing of high flux irradiated and surveillance material reactor pressure vessel weld metal

    Article • Journal of Nuclear Materials, April 2022, Elsevier

    Dr Mattias Thuvander

  8. The Effect of Hf Addition on the Boronizing and Siliciding Behavior of CoCrFeNi High Entropy Alloys

    Article • Materials, March 2022, MDPI AG

    Dr Mattias Thuvander

  9. Analysis of thermal embrittlement of a low alloy steel weldment using fracture toughness and microstructural investigations

    Article • Engineering Fracture Mechanics, March 2022, Elsevier

    Dr Mattias Thuvander

  10. Carbide Precipitation in a Low Alloyed Steel during Aging Studied by Atom Probe Tomography and Thermodynamic Modeling

    Article • Metals, December 2021, MDPI AG

    Dr Mattias Thuvander

  11. Integrated effect of thermal ageing and low flux irradiation on microstructural evolution of the ferrite of welded austenitic stainless steels

    Article • Journal of Nuclear Materials, August 2021, Elsevier

    Dr Mattias Thuvander

  12. An atom probe tomography study of the chemistry of radiation-induced dislocation loops in Zircaloy-2 exposed to boiling water reactor operation

    Article • Journal of Nuclear Materials, July 2021, Elsevier

    Dr Mattias Thuvander

  13. Characterization of as-deposited cold sprayed Cr-coating on Optimized ZIRLO™ claddings

    Article • Journal of Nuclear Materials, June 2021, Elsevier

    Dr Mattias Thuvander

  14. Insight into hydrothermal aging effect on Pd sites over Pd/LTA and Pd/SSZ-13 as PNA and CO oxidation monolith catalysts

    Article • Applied Catalysis B Environment and Energy, December 2020, Elsevier

    Dr Mattias Thuvander

  15. Precipitation of γ’ during cooling of nickel-base superalloy Haynes 282

    Article • Philosophical Magazine Letters, November 2020, Taylor & Francis

    Dr Mattias Thuvander

  16. Effect of Tempering on the Bainitic Microstructure Evolution Correlated with the Hardness in a Low-Alloy Medium-Carbon Steel

    Article • Metallurgical and Materials Transactions A, October 2020, Springer Science + Business Media

    Dr Mattias Thuvander

  17. Complete precipitate dissolution during adiabatic shear localisation in a Ni-based superalloy

    Article • Philosophical Magazine Letters, September 2020, Taylor & Francis

    Dr Mattias Thuvander

  18. Dynamic Impurity Redistributions in Kesterite Absorbers

    Article • physica status solidi (b), April 2020, Wiley

    Dr Mattias Thuvander

  19. Influence of heat treatment under hot isostatic pressing (HIP) on microstructure of intermetallic-reinforced tool steel manufactured by laser powder bed fusion

    Article • Materials Science and Engineering A, January 2020, Elsevier

    Dr Mattias Thuvander

  20. Multiple Influences of Molybdenum on the Precipitation Process in a Martensitic PH Stainless Steel

    Article • Metals, October 2019, MDPI AG

    Dr Mattias Thuvander

  21. Atom probe tomography field evaporation characteristics and compositional corrections of ZrB2

    Article • Materials Characterization, October 2019, Elsevier

    Dr Mattias Thuvander

  22. Improving Compositional Accuracy in APT Analysis of Carbides Using a Decreased Detection Efficiency

    Article • Microscopy and Microanalysis, April 2019, Oxford University Press (OUP)

    Dr Mattias Thuvander

  23. Microstructural Characterization of Sulfurization Effects in Cu(In,Ga)Se2 Thin Film Solar Cells

    Article • Microscopy and Microanalysis, March 2019, Oxford University Press (OUP)

    Dr Mattias Thuvander

  24. Elemental Distribution in CrNbTaTiW-C High Entropy Alloy Thin Films

    Article • Microscopy and Microanalysis, February 2019, Oxford University Press (OUP)

    Dr Mattias Thuvander

  25. Atom Probe Tomography Interlaboratory Study on Clustering Analysis in Experimental Data Using the Maximum Separation Distance Approach

    Article • Microscopy and Microanalysis, February 2019, Oxford University Press (OUP)

    Dr Mattias Thuvander

  26. Martensitic transformations in Ti-6Al-4V (ELI) alloy manufactured by 3D Printing

    Article • Materials Characterization, December 2018, Elsevier

    Dr Mattias Thuvander

  27. Electric-field-controlled reversible order-disorder switching of a metal tip surface

    Article • Physical Review Materials, August 2018, American Physical Society (APS)

    Dr Mattias Thuvander

  28. Microstructure, Solidification Texture, and Thermal Stability of 316 L Stainless Steel Manufactured by Laser Powder Bed Fusion

    Article • Metals, August 2018, MDPI AG

    Dr Mattias Thuvander

  29. Cluster formation in in-service thermally aged pressurizer welds

    Article • Journal of Nuclear Materials, June 2018, Elsevier

    Dr Mattias Thuvander

  30. Spinodal Decomposition in Functionally Graded Super Duplex Stainless Steel and Weld Metal

    Article • Metallurgical and Materials Transactions A, April 2018, Springer Science + Business Media

    Dr Mattias Thuvander

  31. The Effect of Iron on Dislocation Evolution in Model and Commercial Zirconium Alloys

    Article • January 2018, ASTM International

    Chris Race, Dr Mattias Thuvander

  32. Resolving mass spectral overlaps in atom probe tomography by isotopic substitutions – case of TiSi15N

    Article • Ultramicroscopy, January 2018, Elsevier

    Dr Mattias Thuvander

  33. Microstructural Evolution of Welded Stainless Steels on Integrated Effect of Thermal Aging and Low Flux Irradiation

    Article • October 2017, Springer Science + Business Media

    Dr Mattias Thuvander

  34. On the Effect of Preoxidation of Nickel Alloy X-750

    Article • October 2017, Springer Science + Business Media

    Dr Mattias Thuvander

  35. On the Use of Density-Based Algorithms for the Analysis of Solute Clustering in Atom Probe Tomography Data

    Article • October 2017, Springer Science + Business Media

    Dr Mattias Thuvander

  36. Effect of cooling rate after solution treatment on subsequent phase separation during aging of Fe-Cr alloys: A small-angle neutron scattering study

    Article • Acta Materialia, August 2017, Elsevier

    Dr Mattias Thuvander

  37. Atomic-scale investigation of carbon atom migration in surface induced white layers in high-carbon medium chromium (AISI 52100) bearing steel

    Article • Acta Materialia, May 2017, Elsevier

    Dr Mattias Thuvander

  38. Erratum to “Oxide evolution on alloy X-750 in simulated BWR environment” [J. Nucl. Mater. 482 (15 December 2016) 19–27]

    Article • Journal of Nuclear Materials, May 2017, Elsevier

    Dr Mattias Thuvander

  39. Evolution of precipitation in reactor pressure vessel steel welds under neutron irradiation

    Article • Journal of Nuclear Materials, May 2017, Elsevier

    Dr Mattias Thuvander

  40. Corrosion of pre-oxidized nickel alloy X-750 in simulated BWR environment

    Article • Journal of Nuclear Materials, April 2017, Elsevier

    Dr Mattias Thuvander

  41. On the Analysis of Clustering in an Irradiated Low Alloy Reactor Pressure Vessel Steel Weld

    Article • Microscopy and Microanalysis, March 2017, Cambridge University Press

    Dr Mattias Thuvander

  42. The bone-implant interface of dental implants in humans on the atomic scale

    Article • Acta Biomaterialia, January 2017, Elsevier

    Dr Mattias Thuvander

  43. Oxide evolution on Alloy X-750 in simulated BWR environment

    Article • Journal of Nuclear Materials, December 2016, Elsevier

    Dr Mattias Thuvander

  44. The potential of spinodal ferrite decomposition for increasing the very high cycle fatigue strength of duplex stainless steel

    Article • International Journal of Fatigue, December 2016, Elsevier

    Dr Mattias Thuvander

  45. Structural Characterization of Phase Separation in Fe-Cr: A Current Comparison of Experimental Methods

    Article • Metallurgical and Materials Transactions A, October 2016, Springer Science + Business Media

    Dr Mattias Thuvander

  46. Effect of solution treatment on spinodal decomposition during aging of an Fe-46.5 at.% Cr alloy

    Article • Journal of Materials Science, September 2016, Springer Science + Business Media

    Dr Mattias Thuvander

  47. Self-organized nanostructuring in Zr0.69Al0.31N thin films studied by atom probe tomography

    Article • Thin Solid Films, September 2016, Elsevier

    Dr Mattias Thuvander

  48. Microstructural evolution of Fe22%Cr model alloy under thermal ageing and ion irradiation conditions studied by atom probe tomography

    Article • Journal of Nuclear Materials, August 2016, Elsevier

    Prof. Sergey V. Rogozhkin, Dr Mattias Thuvander

  49. Controlling In–Ga–Zn–O thin films transport properties through density changes

    Article • Thin Solid Films, June 2016, Elsevier

    Dr Mattias Thuvander

  50. A Comparison between Ultra-high-strength and Conventional High-strength Fastener Steels: Mechanical Properties at Elevated Temperature and Microstructural Mechanisms

    Article • ISIJ International, January 2016, Iron and Steel Institute of Japan

    Dr Mattias Thuvander

  51. Atom probe tomography of interfaces in ceramic films and oxide scales

    Article • MRS Bulletin, January 2016, Springer Science + Business Media

    Dr Mattias Thuvander

  52. Barrier oxide chemistry and hydrogen pick-up mechanisms in zirconium alloys

    Article • Corrosion Science, January 2016, Elsevier

    Dr Mattias Thuvander

  53. An APT investigation of an amorphous Cr–B–C thin film

    Article • Ultramicroscopy, December 2015, Elsevier

    Dr Mattias Thuvander

  54. Atom probe tomography of a Ti–Si–Al–C–N coating grown on a cemented carbide substrate

    Article • Ultramicroscopy, December 2015, Elsevier

    Dr Mattias Thuvander

  55. Nanostructure evolution and mechanical property changes during aging of a super duplex stainless steel at 300 °C

    Article • Materials Science and Engineering A, October 2015, Elsevier

    Dr Mattias Thuvander

  56. Direct observation of doping incorporation pathways in self-catalytic GaMnAs nanowires

    Article • Journal of Applied Physics, August 2015, American Institute of Physics

    Dr Mattias Thuvander

  57. Direct atom probe tomography observations of concentration fluctuations in Fe–Cr solid solution

    Article • Scripta Materialia, March 2015, Elsevier

    Dr Mattias Thuvander

  58. Early stages of spinodal decomposition in Fe–Cr resolved by in-situ small-angle neutron scattering

    Article • Applied Physics Letters, February 2015, American Institute of Physics

    Dr Mattias Thuvander

  59. Microstructural stability of Fe–Cr–Al alloys at 450–550 °C

    Article • Journal of Nuclear Materials, February 2015, Elsevier

    Dr Mattias Thuvander

  60. Direct observation of hydrogen and deuterium in oxide grain boundaries in corroded Zirconium alloys

    Article • Corrosion Science, January 2015, Elsevier

    Dr Mattias Thuvander

  61. Modelling the Evolution of Multiple Hardening Mechanisms during Tempering of Fe–C–Mn–Ti Martensite

    Article • ISIJ International, January 2015, Iron and Steel Institute of Japan

    Dr Mattias Thuvander

  62. Tin clustering and precipitation in the oxide during autoclave corrosion of Zircaloy-2

    Article • Journal of Nuclear Materials, January 2015, Elsevier

    Dr Mattias Thuvander

  63. Redistribution of alloying elements in Zircaloy-2 after in-reactor exposure

    Article • Journal of Nuclear Materials, November 2014, Elsevier

    Dr Mattias Thuvander

  64. Toward a Comprehensive Mechanistic Understanding of Hydrogen Uptake in Zirconium Alloys by Combining Atom Probe Analysis With Electronic Structure Calculations

    Article • September 2014, ASTM International

    Dr Mattias Thuvander

  65. Oxidation Mechanism in Zircaloy-2—The Effect of SPP Size Distribution

    Article • September 2014, ASTM International

    Dr Mattias Thuvander

  66. Atomically Resolved Tissue Integration

    Article • Nano Letters, July 2014, American Chemical Society (ACS)

    Dr Mattias Thuvander

  67. Initial clustering – a key factor for phase separation kinetics in Fe–Cr-based alloys

    Article • Scripta Materialia, March 2014, Elsevier

    Dr Mattias Thuvander

  68. Effect of Ti on Evolution of Microstructure and Hardness of Martensitic Fe–C–Mn Steel during Tempering

    Article • ISIJ International, January 2014, Iron and Steel Institute of Japan

    Dr Mattias Thuvander

  69. Atom probe tomography investigation of lath boundary segregation and precipitation in a maraging stainless steel

    Article • Ultramicroscopy, September 2013, Elsevier

    Dr Mattias Thuvander

  70. Blind deconvolution of time-of-flight mass spectra from atom probe tomography

    Article • Ultramicroscopy, September 2013, Elsevier

    Dr Mattias Thuvander

  71. Hydrogen analysis in APT: Methods to control adsorption and dissociation of H2

    Article • Ultramicroscopy, September 2013, Elsevier

    Dr Mattias Thuvander

  72. Reduction of multiple hits in atom probe tomography

    Article • Ultramicroscopy, September 2013, Elsevier

    Dr Mattias Thuvander

  73. The 475°C embrittlement in Fe–20Cr and Fe–20Cr–X (X=Ni, Cu, Mn) alloys studied by mechanical testing and atom probe tomography

    Article • Materials Science and Engineering A, July 2013, Elsevier

    Dr Mattias Thuvander

  74. Quantitative Evaluation of Spinodal Decomposition in Fe-Cr by Atom Probe Tomography and Radial Distribution Function Analysis

    Article • Microscopy and Microanalysis, May 2013, Oxford University Press (OUP)

    Dr Mattias Thuvander

  75. Atom Probe Tomography of Oxide Scales

    Article • Oxidation of Metals, December 2012, Springer Science + Business Media

    Dr Mattias Thuvander

  76. Enrichment of Fe and Ni at metal and oxide grain boundaries in corroded Zircaloy-2

    Article • Corrosion Science, December 2012, Elsevier

    Dr Mattias Thuvander

  77. Concurrent phase separation and clustering in the ferrite phase during low temperature stress aging of duplex stainless steel weldments

    Article • Acta Materialia, September 2012, Elsevier

    Dr Mattias Thuvander

  78. Precipitation process of martensitic PH stainless steel Nanoflex

    Article • Materials Science and Technology, June 2012, Taylor & Francis

    Dr Mattias Thuvander

  79. Observations of copper clustering in a 25Cr-7Ni super duplex stainless steel during low-temperature aging under load

    Article • Philosophical Magazine Letters, April 2012, Taylor & Francis

    Dr Mattias Thuvander

  80. Spinodal decomposition of Ti0.33Al0.67N thin films studied by atom probe tomography

    Article • Thin Solid Films, April 2012, Elsevier

    Dr Mattias Thuvander

  81. 3D Analysis of Phase Separation in Ferritic Stainless Steels

    Article • January 2012, Springer Science + Business Media

    Dr Mattias Thuvander

  82. Towards quantitative three-dimensional characterisation of buried InAs quantum dots

    Article • Journal of Physics Conference Series, November 2011, Institute of Physics Publishing

    Dr Mattias Thuvander

  83. An improved thermodynamic modeling of the Fe–Cr system down to zero kelvin coupled with key experiments

    Article • Calphad, September 2011, Elsevier

    Dr Mattias Thuvander

  84. Microstructures and hardness of as-quenched martensites (0.1–0.5%C)

    Article • Acta Materialia, August 2011, Elsevier

    Dr Mattias Thuvander

  85. Methods of quantitative matrix analysis of Zircaloy-2

    Article • Ultramicroscopy, May 2011, Elsevier

    Dr Mattias Thuvander

  86. Quantitative APT analysis of Ti(C,N)

    Article • Ultramicroscopy, May 2011, Elsevier

    Dr Mattias Thuvander

  87. Quantitative atom probe analysis of carbides

    Article • Ultramicroscopy, May 2011, Elsevier

    Dr Mattias Thuvander

  88. Detailed Analysis of the Microstructure of the Metal/Oxide Interface Region in Zircaloy-2 after Autoclave Corrosion Testing

    Article • Journal of ASTM International, January 2011, ASTM International

    Dr Mattias Thuvander

  89. Electron backscattering diffraction study of coalesced bainite in high strength steel weld metals

    Article • Materials Science and Technology, October 2008, Taylor & Francis

    Dr Mattias Thuvander

  90. Three-dimensional analysis of coalesced bainite using focused ion beam tomography

    Article • Materials Characterization, July 2008, Elsevier

    Dr Mattias Thuvander

  91. Effect of welding procedure on texture and strength of nickel based weld metal

    Article • Science and Technology of Welding & Joining, August 2007, Taylor & Francis

    Dr Mattias Thuvander

  92. Three-dimensional atomic scale analysis of nanostructured materials

    Article • Micron, January 2001, Elsevier

    Dr Mattias Thuvander

  93. APFIM Studies of Grain and Phase Boundaries

    Article • Materials Characterization, January 2000, Elsevier

    Dr Mattias Thuvander

  94. Grain boundary segregation during heat treatment at 600°C in a model Alloy 600

    Article • Materials Science and Engineering A, September 1999, Elsevier

    Dr Mattias Thuvander

  95. Evolution of grain boundary chemistry in a Ni–17Cr–9Fe model alloy

    Article • Materials Science and Engineering A, July 1998, Elsevier

    Dr Mattias Thuvander

  96. A statistical method to detect ordering and phase separation by APFIM

    Article • Ultramicroscopy, June 1998, Elsevier

    Dr Mattias Thuvander

  97. On APFIM of Grain Boundaries in a Nickel Base Superalloy

    Article • Journal de Physique IV (Proceedings), September 1996, EDP Sciences

    Dr Mattias Thuvander

  98. Atom probe analysis of carbonitride grains in (Ti, W, Ta, Mo)(C, N) () cermets with different carbon content

    Article • Applied Surface Science, March 1996, Elsevier

    Dr Mattias Thuvander

  99. Grain boundary precipitation and segregation in Ni16Cr9Fe model materials

    Article • Applied Surface Science, March 1996, Elsevier

    Dr Mattias Thuvander