All Stories

  1. An Electrochemical Approach to the Recovery of Metals Typical of Battery Waste
  2. PEO on Mg AZ31 with Sepiolite as Inhibitor Carrier for Improved Corrosion Protection
  3. Sepiolite reinforced PEO layer on AZ 31
  4. Passive layer investigation on tin and tin solder alloys
  5. Pattern formation during Sb/Sb2O3 electrodeposition
  6. Degradation studies of epoxy coatings on printed circuit boards after pressure cooker test
  7. Formation mechanism of electrodeposited Sb/Sb2O3 micro-composites
  8. Facile fabrication of nanostructured alumina membranes
  9. Investigation of the passive layer on a solid-state sintered silicon carbide ceramic formed in sulfuric acid
  10. An FT-IRRAS-study of anodic oxide films on aluminum alloys and the impact of bath aging
  11. Complementary EIS/FTIR study of the degradation of adhesives in electronic packaging
  12. Corrosion behavior of anodized AA‐6060 depending on the anodizing bath aging
  13. Internal dynamics of blended Li-insertion electrodes
  14. Anodizing—Interplay between bath aging and oxide formation and properties
  15. Recent insights into the electrochemical behavior of blended lithium insertion cathodes: A review
  16. Microelectrochemical investigation of anodic oxide formation on the aluminum alloy AA2024
  17. Particle reinforced open porous anodizing layers on AA5005
  18. Temperature induced compositional redistribution in blended insertion electrodes
  19. Sodiation vs. Lithiation of FePO 4 : A comparative kinetic study
  20. Corrosion protection of thickness reduced plasma electrolytic layers on AZ31
  21. TEM investigation of barrier‐like anodic oxide films on aluminum
  22. Determination of state of charge-dependent asymmetric Butler–Volmer kinetics for LixCoO2 electrode using GITT measurements
  23. Analysis of the counter-electrode potential in a 3-electrode lithium ion battery cell
  24. Local Heat Generation in a Single Stack Lithium Ion Battery Cell
  25. Investigation of charge transfer kinetics of Li-Intercalation in LiFePO 4
  26. Enhanced Surface Finishing of Tungsten Carbide By Using Organic Additives
  27. Electrochemical corrosion of silicon-infiltrated silicon carbide ceramics in aqueous solutions
  28. Electrochemical Machining of cemented carbides
  29. Microscopic in-operando thermography at the cross section of a single lithium ion battery stack
  30. Pulse plating of manganese oxide nanoparticles on aligned MWCNT
  31. D2 Enertrode: Production Technologies and Component Integration of Nanostructured Carbon Electrodes for Energy Technology-Functionalized Carbon Materials for Efficient Electrical Energy Supply
  32. Electrochemical corrosion of silicon carbide ceramics in sodium hydroxide
  33. Anodic dissolution of cobalt in aqueous sodium nitrate solution at high current densities
  34. The effect of bath aging on the microstructure of anodic oxide layers on AA1050
  35. Galvanic corrosion of metal/ceramic coupling
  36. Electrochemical corrosion of silicon carbide ceramics in H2SO4
  37. Electrochemical machining of hard metals – WC/Co as example
  38. In-operando temperature measurement across the interfaces of a lithium-ion battery cell
  39. The mechanism of anodic dissolution of cobalt in neutral and alkaline electrolyte at high current density
  40. Anodic dissolution behaviour and surface texture development of cobalt under electrochemical machining conditions
  41. Pulse plating of platinum on aligned multiwalled carbon nanotubes
  42. Investigations of electrochemical double layer capacitor (EDLC) materials - a comparison of test methods
  43. Anomalies in high-field growth of aluminium oxide using pulse anodizing
  44. Interplay between parameter variation and oxide structure of a modified PAA process
  45. Spectroscopic reflectometry as in-operando method for thickness determination of anodic oxide films on titanium
  46. Corrosion Damage to a Dropped Handlebar Made of AA7075
  47. Electrodeposition of copper on aligned multi-walled carbon nanotubes
  48. Investigation of corrosion products formed on C35–AlMgSi0·5 friction welds during natural weathering in marine climate
  49. In-situ investigation of the interplay between microstructure and anodic copper dissolution under near-ECM conditions—Part 2: The transpassive state
  50. Application of Carbon Nanotubes Directly Grown on Aluminum Foils as Electric Double Layer Capacitor Electrodes
  51. Materials and Corrosion 2/2012
  52. Electrochemical corrosion of liquid phase sintered silicon carbide ceramics
  53. In-situ investigation of the interplay between microstructure and anodic copper dissolution under near-ECM conditions – Part 1: The active state
  54. Investigation concerning the applicability of raman spectroscopy for prospective inline monitoring of electrode processing for lithium ion batteries
  55. Screen-printed gold thick films for electrochemical sensor applications
  56. Influence of electric potentials on the tribological behaviour of silicon carbide
  57. In situ temperature measurement on the metal/oxide/electrolyte interface during the anodizing of aluminum
  58. Thickness determination of thin anodic titanium oxide films-a comparison between coulometry and reflectometry
  59. In-situ investigation of the surface-topography during anodic dissolution of copper under near-ECM conditions
  60. Microelectrochemical investigation on aluminium-steel friction welds
  61. Electrochemical corrosion of silicon carbide ceramics
  62. Beurteilung von Korrosionsschutzsystemen für Offshore‐Windenergietürme – Teil 2: Ergebnisse und Schlussfolgerungen
  63. Beurteilung von Korrosionsschutzsystemen für Offshore-Windenergietürme - Teil 1: Problemstellung und Versuchsdurchführung
  64. Micro-EIS of anodic thin oxide films on titanium for capacitor applications
  65. Anodic oxide formation on AA2024: electrochemical and microstructure investigation
  66. Investigation of thin oxide films on titanium for capacitor applications
  67. Application of a multi-channel zero-resistance current amplifier for screening processes
  68. Investigation of the initial stage of crevice corrosion on Al99.5 by electrochemical noise analysis
  69. Interplay between the deposition mode and microstructure in electrochemically deposited Cu thin films
  70. Microstructure formation in electrochemically deposited Copper thin films
  71. Processing, Properties and Coating of Micro-Porous Syntactic Foams
  72. Rauschuntersuchungen zur Spaltkorrosion
  73. Inhibitor efficiency inside small crevices investigated by Electrochemical Noise Analysis