All Stories

  1. Eco-Friendly Sol–Gel Coatings with Organic Corrosion Inhibitors for Lightweight AZ61 Alloy
  2. (Invited) Multiscale Electrochemical Analysis of Sol-Gel Films Modified with Eco-Friendly Corrosion Inhibitors for Active Corrosion Protection of AZ61 Magnesium Alloy
  3. Corrosion control by autonomous self-healing epoxy coatings based on superabsorbent healing agents
  4. Evaluation of Low-Toxic Hybrid Sol-Gel Coatings with Organic pH-Sensitive Inhibitors for Corrosion Protection of AA2024 Aluminium Alloy
  5. Hybrid Sol-Gel Coatings Doped with Non-Toxic Corrosion Inhibitors for Corrosion Protection on AZ61 Magnesium Alloy
  6. Biomimetic hydroxyapatite (HAp) coatings on pure Mg and their physiological corrosion behavior
  7. Controlled Rate Thermal Analysis (CRTA) as a Fast and Effective Method for the Development of Ceramic Powders of Synthetic Hydroxyapatite at Low Temperatures
  8. Organic-inorganic hybrid coatings containing phosphorus precursors prepared by sol–gel on Ti6Al4V alloy: Electrochemical and in-vitro biocompatibility evaluation
  9. Morphology and composition of Zn–Ni alloy obtained from sulphate bath containing complexing agent
  10. Enhancing the Corrosion Protection of AA2024-T3 Alloy by Surface Treatments Based on Piperazine-Modified Hybrid Sol–Gel Films
  11. Efficacy of laser shock processing of biodegradable Mg and Mg-1Zn alloy on their in vitro corrosion and bacterial response
  12. Effect of ZrO2 nanoparticles and L-Cys as dopants in sol-gel coating for protection of AZ61 Mg alloy
  13. The Steel-Aluminum Galvanic System under Thin Electrolyte Films: Simulation and Validation
  14. A Critical Review of the Application of Electrochemical Techniques for Studying Corrosion of Mg and Mg Alloys: Opportunities and Challenges
  15. Sol-gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications
  16. Effect of Isothermal Oxidation and Sol-Gel Thin Film Formation on Corrosion Behaviour of AZ31 and AZ61 Commercial Magnesium Alloys
  17. Improved Corrosion Resistance of AA2024 Alloys through Hybrid Organic-Inorganic Sol-Gel Films Modified with Piperazine
  18. Controlled Rate Thermal Analysis (CRTA) as New Method to Control the Specific Surface in Hydroxyapatite Thin Coatings
  19. Biocompatibility and Corrosion Protection Behaviour of Hydroxyapatite Sol-Gel-Derived Coatings on Ti6Al4V Alloy
  20. In vitro corrosion behaviour of surgical 316LVM stainless steel modified by Si+ ion implantation – An electrochemical impedance spectroscopy study
  21. SCANNING ELECTROCHEMICAL MICROSCOPY CHARACTERIZATION OF SOL-GEL COATINGS APPLIED ON AA2024-T3 SUBSTRATE FOR CORROSION PROTECTION
  22. INORGANIC-ORGANIC NANOCOMPOSITE MATERIALS BASED ON MACROCYCLIC COMPOUNDS
  23. Native Oxide Films on AZ31 and AZ61 Commercial Magnesium Alloys – Corrosion Behaviour, Effect on Isothermal Oxidation and Sol–gel Thin Film Formation
  24. Effect of heat treatment of magnesium alloy substrates on corrosion resistance of a hybrid organic–inorganic sol–gel film
  25. Influence of substrate composition on corrosion protection of sol–gel thin films on magnesium alloys in 0.6M NaCl aqueous solution
  26. A cathodic delamination study of coatings with and without mechanical defects
  27. Effect of Native Oxide Film on Commercial Magnesium Alloys Substrates and Carbonate Conversion Coating Growth and Corrosion Resistance
  28. A study on the relationships between corrosion properties and chemistry of thermally oxidised surface films formed on polished commercial magnesium alloys AZ31 and AZ61
  29. Synthesis and characterization of polysulfone/layered double hydroxides nanocomposite membranes for fuel cell application
  30. Enhancing in vitro biocompatibility and corrosion protection of organic–inorganic hybrid sol–gel films with nanocrystalline hydroxyapatite
  31. Characterization of polypyrrole/phosphotungstate membranes by electrochemical impedance spectroscopy
  32. Biocompatible hybrid organic–inorganic sol–gel coatings for corrosion protection of Ti6Al4V alloys
  33. Influence of irregularities in the electrolyte on the cathodic protection of steel
  34. Electrochemical analysis of the UV treated bactericidal Ti6Al4V surfaces
  35. Recubrimientos de Hidroxiapatita Nanocristalina – Preparación, Caracterización y Evaluación de la Bioactividad
  36. Effect of conductivity and frequency on detection of heterogeneities in solid/liquid interfaces using local electrochemical impedance
  37. Grit blasting of medical stainless steel: implications on its corrosion behavior, ion release and biocompatibility
  38. Bacterial adhesion reduction on a biocompatible Si+ ion implanted austenitic stainless steel
  39. Preparation of sol–gel hybrid materials from γ-methacryloxypropyltrimethoxysilane and tetramethyl orthosilicate: study of the hydrolysis and condensation reactions
  40. Study of the electrical properties of novel hybrid organic–inorganic conducting textiles of polypyrrole-phosphotungstate-polyester using electrochemical impedance spectroscopy
  41. Effect of the chemistry and structure of the native oxide surface film on the corrosion properties of commercial AZ31 and AZ61 alloys
  42. Atmospheric corrosion of magnesium alloys AZ31 and AZ61 under continuous condensation conditions
  43. Using the right side of Poisson’s equation to save on numerical calculations in FEM simulation of electrochemical systems
  44. Effect of naturally formed oxide films and other variables in the early stages of Mg-alloy corrosion in NaCl solution
  45. The Application of X-Ray Photoelectron Spectroscopy in Understanding Corrosion Mechanisms of Magnesium and Mg-Al Alloys
  46. Multifunctional sol-gel derived thin film based on nanocrystaline hydroxyapatite powders
  47. Native Air-Formed Oxide Film and its Effect on Magnesium Alloys Corrosion
  48. Electrochemical study of tailored sol–gel thin films as pre-treatment prior to organic coating for AZ91 magnesium alloy
  49. Tailored Sol-Gel Coatings as Environmentally Friendly Pre-Treatments for Corrosion Protection
  50. A Mathematical Model to Study the Effect of Different Variables on the Potential Distribution in a Damaged Metal/Organic Coating System Using FEM
  51. Characterisation and corrosion studies of steel electrodes covered by polypyrrole/phosphotungstate using Electrochemical Impedance Spectroscopy
  52. DOI: 10.13140/2.1.3192.6565
  53. Recobrimento da liga Ti-6Al-4V com hidroxiapatita pelo método sol-gel e sua aplicação a hastes femorais não-cimentadas
  54. Electrochemical impedance spectroscopy study of the effect of curing time on the early barrier properties of silane systems applied on steel substrates
  55. hydroxyapatite coatings obtained by sol-gel and electrophoresis
  56. Recubrimientos de hidroxiapatita preparados mediante un proceso sol-gel
  57. Preparation and electrochemical study of cerium–silica sol–gel thin films
  58. Modificación superficial de aleaciones de base aluminio (anodizadas y no anodizadas) mediante recubrimientos de sílice
  59. Nanocomposite materials based on organopolysiloxane/macrocyle systems for electrochemical sensors
  60. A new silver-ion selective sensor based on a polythiacrown-ether entrapped by sol–gel
  61. ChemInform Abstract: Inorganic‐Organic Nanocomposite Materials Based on Macrocyclic Compounds
  62. Hybrid materials based on vanadium pentoxide intercalation complexes
  63. INORGANIC -ORGANIC NANOCOMPOSITE MATERIALS BASED ON MACROCYCLIC COMPOUNDS
  64. Insertion of In(III) and Ga(III) into MPS3 (M = Mn, Cd) layered materials
  65. Synthesis of pillared clays assisted by microwaves
  66. Reactive nanocomposites based on pillared clays
  67. Application of the Electrochemical Impedance Technique to Study of Pillared Clays
  68. Hybrid Organic-Inorganic Electrode-Membranes Based on Organo-Polysiloxane/Macrocycle Systems
  69. Microwave Assisted Blending-Intercalation of Ion-Conductor Polymers into Layered Silicates
  70. Proton conductivity in Al-montmorillonite pillared clays
  71. Nanocomposite materials with controlled ion mobilityk
  72. Study of the Rusted Steel/Electrolyte System by Electrochemical Techniques
  73. Differences between apparent polarization resistance values obtained in the time and frequency domains
  74. Composite membranes based on macrocycle/polysiloxanes: preparation, characterization and electrochemical behaviour
  75. Electrochemical characterization of composite membranes based on crown-ethers intercalated into montmorillonite
  76. ChemInform Abstract: Organosilicic Membranes Doped with Crown‐Ethers.
  77. Accelerated degradation of a chlorinated rubber paint system applied over rusted steel
  78. Electrochemical determination of rusted steel surface stability
  79. An electrochemical impedance study of the behaviour of some pretreatments applied to rusted steel surfaces
  80. Electrical Properties of Oxyethylene Intercalated Compounds
  81. Organosilicic membranes doped with crown-ethers
  82. Corrosion of Rusted Steel in Aqueous Solutions of Tannic Acid
  83. Effect of treatment with tannic, gallic and phosphoric acids on the electrochemical behaviour of rusted steel
  84. ChemInform Abstract: Lithium‐MVO5 (M: Nb, Ta) Bronzes.
  85. Lithium-niobium vanadium oxide and lithium-tantalum vanadium oxide, MVO5, bronzes
  86. Characterization of Clay-Polyoxyethylene Based Membranes Using AC Impedance Spectroscopy
  87. Lithium Intercalation in TaxNb1-xVO5 Mixed Oxides
  88. Ionic conductivity in layer silicates controlled by intercalation of macrocyclic and polymeric oxyethylene compounds
  89. Limitations and Possibilities of the Typical Electochemical Impedance Measurements for Studying Anti-Corrosive Paint Coatings
  90. The charge transfer reaction in Nyquist diagrams of painted steel
  91. Reproducibility of electrical impedance data for a metal/paint system
  92. An interpretation of electrical impedance diagrams for painted galvanized steel
  93. The effect of the abrasive work mix on paint performance over blasted steel
  94. Intercalation mechanism of nitrogenated bases into V2O5 xerogel