
Prof. Stanislaw Legutko
Current affiliation: Politechnika Poznanska
Subject: Mechanical Engineering
Primary location: Poland
The Use of PLC for the Implementation of Technological Operations
Published in:Applied Mechanics and Materials
Publication date:2015-11-01
Taguchi Design of Experiment versus Dynamic Programming Approach in the Optimization of Turning Process
Published in:Applied Mechanics and Materials
Publication date:2015-11-01
Effect of Chemical Exploitation Preparation on the Tribological Properties of CuSn10 Bronze within the Friction Process
Published in:Applied Mechanics and Materials
Publication date:2015-11-01
Comparison of the Assembly Line and Cell Assembly - A Case Study in Mechanical Engineering Company
Published in:Applied Mechanics and Materials
Publication date:2015-11-01
Implementation and Benefits of Introducing a Computerised Maintenance Management System into a Manufacturing Company
Published in:Applied Mechanics and Materials
Publication date:2015-11-01
The Effect of EP/AW Additives in Emulsion Mist on the Geometric Structure of the Machined Surface during Carbon Steel C45 Turning
Published in:Applied Mechanics and Materials
Publication date:2015-11-01
Taguchi Design of Experiment in the Optimization of Tool Life in Turning Process of Duplex Stainless Steel DSS
Published in:Applied Mechanics and Materials
Publication date:2015-11-01
Devices and Equipment for Mixing Granular Materials in Industry
Published in:Applied Mechanics and Materials
Publication date:2015-11-01
Dynamic Programming Approach in the Optimization of Tool Life in Turning Process of Duplex Stainless Steel DSS
Published in:Key Engineering Materials
Publication date:2016-02-01
Roughness Parameters Calculation By Means Of On-Line Vibration Monitoring Emerging From AWJ Interaction With Material
Published in:Metrology and Measurement Systems
Publication date:2015-01-01
Characteristics of geometric structure of the surface after grinding
Published in:MATEC Web of Conferences
Publication date:2017-01-01
Tool life of ceramic wedges during precise turning of tungsten
Published in:MATEC Web of Conferences
Publication date:2017-01-01
Investigation of the influence of coolant-lubricant modification on selected effects of pull broaching
Published in:E3S Web of Conferences
Publication date:2017-01-01