Dr Lawrence Eugene Murr

All Stories

1. 
   Handbook of Materials Structures, Properties, Processing and Performance

   Article • January 2021, Springer Science + Business Media

   Dr Lawrence Eugene Murr

2. 
   Crystallography Principles

   Article • January 2014, Springer Science + Business Media

   Dr Lawrence Eugene Murr

3. 
   Eutectic Composites

   Article • January 2014, Springer Science + Business Media

   Dr Lawrence Eugene Murr

4. 
   Point Defects

   Article • January 2014, Springer Science + Business Media

   Dr Lawrence Eugene Murr

5. 
   Chemical Forces: Molecules and Nanoparticles

   Article • January 2014, Springer Science + Business Media

   Dr Lawrence Eugene Murr

6. 
   A Brief History of Metals

   Article • January 2014, Springer Science + Business Media

   Dr Lawrence Eugene Murr

7. 
   A Brief Introduction to Quantum Mechanics

   Article • January 2014, Springer Science + Business Media

   Dr Lawrence Eugene Murr

8. 
   Photonic Materials and Structures

   Article • January 2014, Springer Science + Business Media

   Dr Lawrence Eugene Murr

9. 
   Classifications and Structures of Nanomaterials

   Article • January 2014, Springer Science + Business Media

   Dr Lawrence Eugene Murr

10. 
    Bioprinting and Biofabrication of Organ

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

11. 
    Serendipitous Nanotechnology in Antiquity

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

12. 
    Aperiodic Crystal Structures: Quasicrystals

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

13. 
    Failure of Integrated Circuits

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

14. 
    Tissue Engineering Scaffolds and Scaffold Materials

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

15. 
    Rapid Prototyping Technologies: Solid Freedom Fabrication

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

16. 
    Novel Structure Printing

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

17. 
    Explosive Welding, Forming, and Powder Consolidation

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

18. 
    Chemical Forces: Nanoparticles

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

19. 
    Synthesis and Processing of Nanomaterials

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

20. 
    3D Printing: Printed Electronics

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

21. 
    Examples of Man-Made Composite Structures

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

22. 
    3D and Multidimensional Materials Science

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

23. 
    Classification of Composite Materials and Structures

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

24. 
    Friction-Stir Welding and Processing

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

25. 
    Implant Materials and Structures

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

26. 
    Planar Defects: Crystal Interfaces

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

27. 
    Structure of Metals and Alloys

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

28. 
    Electromagnetic Color and Color in Materials

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

29. 
    Materials in Extreme Environments

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

30. 
    Material Processing by Sliding, Grinding, Machining, Extrusion, and Wire Drawing

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

31. 
    Performance, Applications, and Health Concerns of Nanomaterials

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

32. 
    Elastic Anisotropy in Deformed (Textured) and Directionally Grown Crystalline and Polycrystalline Materials

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

33. 
    Examples of Materials Science and Engineering in Antiquity

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

34. 
    Additive Manufacturing: Changing the Rules of Manufacturing

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

35. 
    Photolithography Applied to Integrated Circuit (IC) Microfabrication

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

36. 
    Examples of Directional Crystal Structures: Gas-Turbine Component Applications in Superalloys

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

37. 
    Applications and Examples of Multiscale Computer Simulations in Materials Science and Engineering

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

38. 
    Digital Fabrication with Embedded Electronics

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

39. 
    Examples of Natural Composites and Composite Structures

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

40. 
    Mechanical and Other Properties of Nanocrystalline Materials

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

41. 
    Structure and Function of Viruses and Bacteria

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

42. 
    Comparison of Biological (Natural) Materials and Engineering Materials Properties

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

43. 
    Strategies for Bone Replacement and Tissue Augmentation

    Article • January 2014, Springer Science + Business Media

    Dr Lawrence Eugene Murr

44. 
    Electron Beam Melting

    Article • January 2014, Elsevier

    Dr Lawrence Eugene Murr

45. 
    Multi-material metallic structure fabrication using electron beam melting

    Article • The International Journal of Advanced Manufacturing Technology, November 2013, Springer Science + Business Media

    Dr Lawrence Eugene Murr

46. 
    Microstructures and properties of solid and reticulated mesh components of pure iron fabricated by electron beam melting

    Article • Journal of Materials Research and Technology, October 2013, Elsevier

    Dr Lawrence Eugene Murr

47. 
    Microstructures of Rene 142 nickel-based superalloy fabricated by electron beam melting

    Article • Acta Materialia, June 2013, Elsevier

    Dr Lawrence Eugene Murr

48. 
    Microstructures of Niobium Components Fabricated by Electron Beam Melting

    Article • Metallography Microstructure and Analysis, May 2013, Springer Science + Business Media

    Dr Lawrence Eugene Murr

49. 
    Correlating impact related residual microstructures through 2D computer simulations and microindentation hardness mapping: review

    Article • Materials Science and Technology, October 2012, Taylor & Francis

    Dr Lawrence Eugene Murr

50. 
    Microstructures and Properties of 17-4 PH Stainless Steel Fabricated by Selective Laser Melting

    Article • Journal of Materials Research and Technology, October 2012, Elsevier

    Dr Lawrence Eugene Murr

51. 
    Fabrication of Metal and Alloy Components by Additive Manufacturing: Examples of 3D Materials Science

    Article • Journal of Materials Research and Technology, April 2012, Elsevier

    Dr Lawrence Eugene Murr

52. 
    The Microstructure of the Cultured Freshwater Pearl

    Article • JOM, March 2012, Springer Science + Business Media

    Dr Lawrence Eugene Murr

53. 
    Microstructures and mechanical behavior of Inconel 718 fabricated by selective laser melting

    Article • Acta Materialia, March 2012, Elsevier

    Dr Lawrence Eugene Murr

54. 
    Microstructures for Two-Phase Gamma Titanium Aluminide Fabricated by Electron Beam Melting

    Article • Metallography Microstructure and Analysis, February 2012, Springer Science + Business Media

    Dr Lawrence Eugene Murr

55. 
    Contributions of Light Microscopy to Contemporary Materials Characterization: The New Directional Solidification

    Article • Metallography Microstructure and Analysis, February 2012, Springer Science + Business Media

    Dr Lawrence Eugene Murr

56. 
    Shock-Wave Consolidation of Nanostructured Bismuth Telluride Powders

    Article • Journal of Electronic Materials, February 2012, Springer Science + Business Media

    Dr Lawrence Eugene Murr

57. 
    Compression fatigue behavior of Ti–6Al–4V mesh arrays fabricated by electron beam melting

    Article • Acta Materialia, February 2012, Elsevier

    Dr Lawrence Eugene Murr

58. 
    Fabricating Functional Ti-Alloy Biomedical Implants by Additive Manufacturing Using Electron Beam Melting

    Article • Journal of Biotechnology & Biomaterials, January 2012, OMICS Publishing Group

    Dr Lawrence Eugene Murr

59. 
    Next Generation Orthopaedic Implants by Additive Manufacturing Using Electron Beam Melting

    Article • International Journal of Biomaterials, January 2012, Hindawi Publishing Corporation

    Dr Lawrence Eugene Murr

60. 
    Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies

    Article • Journal of Material Science and Technology, January 2012, Elsevier

    Dr Lawrence Eugene Murr

61. 
    Evaluation of Titanium Alloys Fabricated Using Rapid Prototyping Technologies—Electron Beam Melting and Laser Beam Melting

    Article • Materials, October 2011, MDPI AG

    Dr Lawrence Eugene Murr

62. 
    Materials characterization of railgun erosion phenomena

    Article • Materials Science and Engineering A, September 2011, Elsevier

    Dr Lawrence Eugene Murr

63. 
    Microstructural and Process Characterization of Conductive Traces Printed from Ag Particulate Inks

    Article • Materials, May 2011, MDPI AG

    Dr Lawrence Eugene Murr

64. 
    Open-Cellular Co-Base and Ni-Base Superalloys Fabricated by Electron Beam Melting

    Article • Materials, April 2011, MDPI AG

    Dr Lawrence Eugene Murr

65. 
    Comparative microstructures and cytotoxicity assays for ballistic aerosols composed of micrometals and nanometals: respiratory health implications

    Article • International Journal of Nanomedicine, January 2011, Taylor & Francis

    Dr Lawrence Eugene Murr

66. 
    Characterization and Cytotoxic Assessment of Ballistic Aerosol Particulates for Tungsten Alloy Penetrators into Steel Target Plates

    Article • International Journal of Environmental Research and Public Health, August 2010, MDPI AG

    Dr Lawrence Eugene Murr

67. 
    Multi‐material bonding in ultrasonic consolidation

    Article • Rapid Prototyping Journal, April 2010, Emerald

    Dr Lawrence Eugene Murr

68. 
    A Review of FSW Research on Dissimilar Metal and Alloy Systems

    Article • Journal of Materials Engineering and Performance, February 2010, Springer Science + Business Media

    Dr Lawrence Eugene Murr

69. 
    Metallographic Characterization of Additive-Layer Manufactured Products by Electron Beam Melting of Ti-6Al-4V Powder

    Article • Practical Metallography, September 2009, Carl Hanser Verlag

    Dr Lawrence Eugene Murr

70. 
    Natural and anthropogenic environmental nanoparticulates: Their microstructural characterization and respiratory health implications

    Article • Atmospheric Environment, June 2009, Elsevier

    Dr Lawrence Eugene Murr

71. 
    Imaging systems and materials characterization

    Article • Materials Characterization, May 2009, Elsevier

    Dr Lawrence Eugene Murr

72. 
    Nanoparticulate materials in antiquity: The good, the bad and the ugly

    Article • Materials Characterization, April 2009, Elsevier

    Dr Lawrence Eugene Murr

73. 
    Microstructures and Nanostructures for Environmental Carbon Nanotubes and Nanoparticulate Soots

    Article • International Journal of Environmental Research and Public Health, December 2008, MDPI AG

    Dr Lawrence Eugene Murr

74. 
    Stability comparison of simulated double-walled carbon nanotube structures

    Article • Carbon, December 2008, Elsevier

    Dr Lawrence Eugene Murr

75. 
    Characterization of micro and nano two-phase regimes created by explosive shock-wave consolidation of powder mixtures

    Article • Materials Characterization, September 2008, Elsevier

    Dr Lawrence Eugene Murr

76. 
    Imaging Systems and Materials Characterization

    Article • Microscopy and Microanalysis, August 2008, Oxford University Press (OUP)

    Dr Lawrence Eugene Murr

77. 
    Melting as an extreme deformation mechanism at high strain rates

    Article • April 2008, WITPRESS LTD.

    Dr Lawrence Eugene Murr

78. 
    Cytotoxicity and reactive oxygen species generation from aggregated carbon and carbonaceous nanoparticulate materials

    Article • International Journal of Nanomedicine, March 2008, Dove Medical Press

    Dr Lawrence Eugene Murr

79. 
    Metallurgical and acoustical characterization of a hydroformed, 304 stainless steel, Caribbean-style musical pan

    Article • Materials Characterization, March 2008, Elsevier

    Dr Lawrence Eugene Murr

80. 
    Direct contact cytotoxicity assays for filter-collected, carbonaceous (soot) nanoparticulate material and observations of lung cell response

    Article • Atmospheric Environment, March 2008, Elsevier

    Dr Lawrence Eugene Murr

81. 
    Applications of extreme deformation

    Article • Materials Technology, December 2007, Taylor & Francis

    Dr Lawrence Eugene Murr

82. 
    Explosive Shock-Wave Consolidation of Aluminum Powder/Carbon Nanotube Aggregate Mixtures: Optical and Electron Metallography

    Article • Metallurgical and Materials Transactions A, October 2007, Springer Science + Business Media

    Dr Lawrence Eugene Murr

83. 
    Nanoparticulate Materials in Antiquity: The Good, the Bad and the Ugly

    Article • Microscopy and Microanalysis, August 2007, Oxford University Press (OUP)

    Dr Lawrence Eugene Murr

84. 
    Dynamic Recrystallization: The Dynamic Deformation Regime

    Article • Metallurgical and Materials Transactions A, June 2007, Springer Science + Business Media

    Dr Lawrence Eugene Murr

85. 
    Use of WEDM in the Characterization Process of Al/2-Phase Systems Consolidated by Multilayer Cylindrical Dynamic Compaction Method

    Article • May 2007, CrossRef Test Account

    Dr Lawrence Eugene Murr

86. 
    Use of WEDM in the Characterization Process of Al/2-Phase Systems Consolidated by Multilayer Cylindrical Dynamic Compaction Method

    Article • Materials Science Forum, May 2007, Trans Tech Publications

    Dr Lawrence Eugene Murr

87. 
    Cytotoxic effects of aggregated nanomaterials☆

    Article • Acta Biomaterialia, May 2007, Elsevier

    Dr Lawrence Eugene Murr

88. 
    Energetic trends of single-walled carbon nanotube ab initio calculations

    Article • Journal of Materials Science, December 2006, Springer Science + Business Media

    Dr Lawrence Eugene Murr

89. 
    Nanotailoring photocrosslinkable epoxy resins with multi-walled carbon nanotubes for stereolithography layered manufacturing

    Article • Journal of Materials Science, December 2006, Springer Science + Business Media

    Dr Lawrence Eugene Murr

90. 
    Experimental observations and computer simulations for metallic projectile fragmentation and impact crater development in thick metal targets

    Article • International Journal of Impact Engineering, December 2006, Elsevier

    Dr Lawrence Eugene Murr

91. 
    Carbon nanotubes in wood soot

    Article • Atmospheric Science Letters, October 2006, Wiley

    Dr Lawrence Eugene Murr

92. 
    Biological effects of nanoparticulate materials

    Article • Materials Science and Engineering C, September 2006, Elsevier

    Dr Lawrence Eugene Murr

93. 
    Biological issues in materials science and engineering: Interdisciplinarity and the bio-materials paradigm

    Article • JOM, July 2006, Springer Science + Business Media

    Dr Lawrence Eugene Murr

94. 
    Deformation effects in shocked metals and alloys

    Article • Materials Science and Technology, April 2006, Taylor & Francis

    Dr Lawrence Eugene Murr

95. 
    End cap nucleation of carbon nanotubes

    Article • Carbon, March 2006, Elsevier

    Dr Lawrence Eugene Murr

96. 
    Grain boundary contributions to deformation and solid-state flow in severe plastic deformation

    Article • Materials Science and Engineering A, November 2005, Elsevier

    Dr Lawrence Eugene Murr

97. 
    Carbon nanotubes and other fullerenes produced from tire powder injected into an electric arc

    Article • Materials Characterization, November 2005, Elsevier

    Dr Lawrence Eugene Murr

98. 
    Study of friction stir welded A319 and A413 aluminum casting alloys

    Article • Journal of Materials Science, August 2005, Springer Science + Business Media

    Dr Lawrence Eugene Murr

99. 
    A TEM study of soot, carbon nanotubes, and related fullerene nanopolyhedra in common fuel-gas combustion sources

    Article • Materials Characterization, July 2005, Elsevier

    Dr Lawrence Eugene Murr

100. 
     Evaluation of the sensitization process in 304 stainless steel strained 50% by cold-rolling

     Article • Journal of Materials Science, June 2005, Springer Science + Business Media

     Dr Lawrence Eugene Murr

101. 
     TEM observations of a 30 million year old mountain leather nanofiber mineral composite

     Article • Materials Characterization, May 2005, Elsevier

     Dr Lawrence Eugene Murr

102. 
     Chemistry and nanoparticulate compositions of a 10,000 year-old ice core melt water

     Article • Water Research, November 2004, Elsevier

     Dr Lawrence Eugene Murr

103. 
     Effect of uniaxial deformation to 50% on the sensitization process in 316 stainless steel

     Article • Materials Characterization, September 2004, Elsevier

     Dr Lawrence Eugene Murr

104. 
     TEM comparison of chrysotile (asbestos) nanotubes and carbon nanotubes

     Article • Journal of Materials Science, August 2004, Springer Science + Business Media

     Dr Lawrence Eugene Murr

105. 
     Characterization and Comparison of Carbon and Asbestos Nanotubes

     Article • Microscopy and Microanalysis, August 2004, Oxford University Press (OUP)

     Dr Lawrence Eugene Murr

106. 
     A TEM analysis of nanoparticulates in a Polar ice core

     Article • Materials Characterization, March 2004, Elsevier

     Dr Lawrence Eugene Murr

107. 
     Collection and characterization of airborne nanoparticulates

     Article • Materials Characterization, March 2004, Elsevier

     Dr Lawrence Eugene Murr

108. 
     Microstructures in friction-stir welded dissimilar magnesium alloys and magnesium alloys to 6061-T6 aluminum alloy

     Article • Materials Characterization, March 2004, Elsevier

     Dr Lawrence Eugene Murr

109. 
     Characterization of tool wear and weld optimization in the friction-stir welding of cast aluminum 359+20% SiC metal-matrix composite

     Article • Materials Characterization, March 2004, Elsevier

     Dr Lawrence Eugene Murr

110. 
     Observations of common microstructural issues associated with dynamic deformation phenomena: Twins, microbands, grain size effects, shear bands, and dynamic recrystallization

     Article • Journal of Materials Science, February 2004, Springer Science + Business Media

     Dr Lawrence Eugene Murr

111. 
     Electron microscope comparisons of fine and ultra-fine carbonaceous and non-carbonaceous, airborne particulates

     Article • Atmospheric Environment, November 2003, Elsevier

     Dr Lawrence Eugene Murr

112. 
     Introduction to Conventional Transmission Electron Microscopy

     Article • Materials Characterization, October 2003, Elsevier

     Dr Lawrence Eugene Murr

113. 
     Self-optimization in tool wear for friction-stir welding of Al 6061+20% Al2O3 MMC

     Article • Materials Science and Engineering A, May 2003, Elsevier

     Dr Lawrence Eugene Murr

114. 
     Utilization of Selected Area Electron Diffraction Patterns for Characterization of Air Submicron Particulate Matter Collected by a Thermophoretic Precipitator

     Article • Journal of the Air & Waste Management Association, February 2003, Taylor & Francis

     Dr Lawrence Eugene Murr

115. 
     Collecting and characterizing atmospheric nanoparticles

     Article • JOM, December 2002, Springer Science + Business Media

     Dr Lawrence Eugene Murr

116. 
     Microbands and microtwins associated with impact craters in copper and brass targets: the role of stacking fault energy

     Article • Materials Characterization, November 2002, Elsevier

     Dr Lawrence Eugene Murr

117. 
     Flow patterns during friction stir welding

     Article • Materials Characterization, September 2002, Elsevier

     Dr Lawrence Eugene Murr

118. 
     Dynamic recrystallization-induced flow phenomena in tungsten–tantalum (4%) [001] single-crystal rod ballistic penetrators

     Article • Materials Characterization, July 2002, Elsevier

     Dr Lawrence Eugene Murr

119. 
     Comparison of tungsten heavy-alloy rod penetration into ductile and hard metal targets: microstructural analysis and computer simulations

     Article • Materials Science and Engineering A, February 2002, Elsevier

     Dr Lawrence Eugene Murr

120. 
     Comparison of residual microstructures associated with impact craters in fcc stainless steel and bcc iron targets: the microtwin versus microband issue

     Article • Acta Materialia, January 2002, Elsevier

     Dr Lawrence Eugene Murr

121. 
     In Vitro Biocompatibility Studies of Fibroblast Cells on Ti-Ta Alloys.

     Article • MATERIALS TRANSACTIONS, January 2002, Japan Institute of Metals

     Dr Lawrence Eugene Murr

122. 
     Elastic interactions and the metallurgical and acoustic effects of carbon in the Caribbean steel drum

     Article • Materials Characterization, December 2001, Elsevier

     Dr Lawrence Eugene Murr

123. 
     A preliminary study of thermal expansion compensation in cement by ZrW2O8 additions

     Article • Scripta Materialia, August 2001, Elsevier

     Dr Lawrence Eugene Murr

124. 
     Tool wear in the friction-stir welding of aluminum alloy 6061+20% Al2O3: a preliminary study

     Article • Scripta Materialia, July 2001, Elsevier

     Dr Lawrence Eugene Murr

125. 
     Preface

     Article • January 2001, Elsevier

     Dr Lawrence Eugene Murr

126. 
     Deformation twins in oriented, columnar-grained tungsten rod ballistic penetrators

     Article • Materials Science and Engineering A, January 2001, Elsevier

     Dr Lawrence Eugene Murr

127. 
     Comparison of deformation twinning in tungsten and iron ballistic projectiles

     Article • January 2001, Elsevier

     Dr Lawrence Eugene Murr

128. 
     Anomalous flow phenomena in a high-oxygen-containing tantalum explosively formed projectile

     Article • January 2001, Elsevier

     Dr Lawrence Eugene Murr

129. 
     A comparison of residual microstructures in explosively formed projectiles of copper and iron and their role in hydrocode validation

     Article • January 2001, Elsevier

     Dr Lawrence Eugene Murr

130. 
     Tungsten-heavy alloy ballistic rod penetration into a copper target

     Article • January 2001, Elsevier

     Dr Lawrence Eugene Murr

131. 
     Metallography in music

     Article • Materials Characterization, October 2000, Elsevier

     Dr Lawrence Eugene Murr

132. 
     Industrial Materials Science and Engineering

     Article • August 2000, Taylor & Francis

     Dr Lawrence Eugene Murr

133. 
     Shock deformation twinning in an iron explosively formed projectile

     Article • Materials Science and Engineering A, May 2000, Elsevier

     Dr Lawrence Eugene Murr

134. 
     Connecting Materials Science and Music in Steel Drums

     Article • American Scientist, January 2000, Sigma Xi

     Dr Lawrence Eugene Murr

135. 
     Connecting Materials Science and Music in Steel Drums

     Article • American Scientist, January 2000, Sigma Xi

     Dr Lawrence Eugene Murr

136. 
     Flow visualization and residual microstructures associated with the friction-stir welding of 2024 aluminum to 6061 aluminum

     Article • Materials Science and Engineering A, November 1999, Elsevier

     Dr Lawrence Eugene Murr

137. 
     Low-temperature friction-stir welding of 2024 aluminum

     Article • Scripta Materialia, September 1999, Elsevier

     Dr Lawrence Eugene Murr

138. 
     Solid-state flow visualization in the friction-stir welding of 2024 Al to 6061 Al

     Article • Scripta Materialia, April 1999, Elsevier

     Dr Lawrence Eugene Murr

139. 
     Effects of carbon content, deformation, and interfacial energetics on carbide precipitation and corrosion sensitization in 304 stainless steel

     Article • Acta Materialia, December 1998, Elsevier

     Dr Lawrence Eugene Murr

140. 
     Intercalation vortices and related microstructural features in the friction-stir welding of dissimilar metals

     Article • Materials Research Innovations, November 1998, Taylor & Francis

     Dr Lawrence Eugene Murr

141. 
     Microstructures in Friction-Stir Welded Metals

     Article • Journal of Materials Processing and Manufacturing Science, October 1998, SAGE Publications

     Dr Lawrence Eugene Murr

142. 
     Heat Input and Temperature Distribution in Friction Stir Welding

     Article • Journal of Materials Processing and Manufacturing Science, October 1998, SAGE Publications

     Dr Lawrence Eugene Murr

143. 
     Defects and failure in ultra-fine copper magnet wire

     Article • Scripta Materialia, August 1998, Elsevier

     Dr Lawrence Eugene Murr

144. 
     Recruiting and retaining students in metallurgy and materials: One university’s experience

     Article • JOM, April 1998, Springer Science + Business Media

     Dr Lawrence Eugene Murr

145. 
     Correlations of Computed Simulations with Residual Hardness Mappings and Microstructural Observations of High Velocity and Hypervelocity Impact Craters in Copper

     Article • phys stat sol (a), April 1998, Wiley

     Dr Lawrence Eugene Murr

146. 
     A TEM study of precipitation and related microstructures in friction-stir-welded 6061 aluminium

     Article • Journal of Materials Science, March 1998, Springer Science + Business Media

     Dr Lawrence Eugene Murr

147. 
     Friction-stir welding: microstructural characterization

     Article • Materials Research Innovations, March 1998, Taylor & Francis

     Dr Lawrence Eugene Murr

148. 
     Microstructural Issues in a Friction-Stir-Welded Aluminum Alloy

     Article • Scripta Materialia, February 1998, Elsevier

     Dr Lawrence Eugene Murr

149. 
     Ballistic penetration in thick copper plates: Microstructural characterization

     Article • Scripta Materialia, November 1997, Elsevier

     Dr Lawrence Eugene Murr

150. 
     Effects of strain and grain size on carbide precipitation and corrosion sensitization behavior in 304 stainless steel

     Article • Acta Materialia, October 1997, Elsevier

     Dr Lawrence Eugene Murr

151. 
     Microstructural aspects of the friction-stir welding of 6061-T6 aluminum

     Article • Scripta Materialia, August 1997, Elsevier

     Dr Lawrence Eugene Murr

152. 
     Effects of Deformation (Strain) and Heat Treatment on Grain Boundary Sensitization and Precipitation in Austenitic Stainless Steels

     Article • Materials Characterization, August 1997, Elsevier

     Dr Lawrence Eugene Murr

153. 
     Effect of grain size and pressure on twinning and microbanding in oblique shock loading of copper rods

     Article • Acta Materialia, August 1997, Elsevier

     Dr Lawrence Eugene Murr

154. 
     Exfoliation and related microstructures in 2024 aluminum body skins on aging aircraft

     Article • Materials Characterization, April 1997, Elsevier

     Dr Lawrence Eugene Murr

155. 
     Shock-induced deformation twinning in tantalum

     Article • Acta Materialia, January 1997, Elsevier

     Dr Lawrence Eugene Murr

156. 
     Microbands and shear-related microstructural phenomena associated with impact craters in 6061-T6 aluminum

     Article • Materials Science and Engineering A, October 1996, Elsevier

     Dr Lawrence Eugene Murr

157. 
     Deformation twins in a shock-loaded Ta-2.5w/o W precursor plate and a recovered, Ta-2.5w/o W explosively formed penetrator

     Article • Scripta Materialia, October 1996, Elsevier

     Dr Lawrence Eugene Murr

158. 
     Aspects of dynamic recrystallization in shaped charge and explosively formed projectile devices

     Article • Metallurgical and Materials Transactions A, July 1996, Springer Science + Business Media

     Dr Lawrence Eugene Murr

159. 
     Cracks And Fractures in Rock: Geological Analysis with the Acoustic Microscope

     Article • January 1996, Springer Science + Business Media

     Dr Lawrence Eugene Murr

160. 
     Hypervelocity impact cratering: Microstructural characterization

     Article • Scripta Metallurgica et Materialia, July 1995, Elsevier

     Dr Lawrence Eugene Murr

161. 
     LEDS in ultra-high strain-rate deformation

     Article • phys stat sol (a), May 1995, Wiley

     Dr Lawrence Eugene Murr

162. 
     Deformation-induced martensitic characteristics in 304 and 316 stainless steels during room-temperature rolling

     Article • Metallurgical and Materials Transactions A, March 1995, Springer Science + Business Media

     Dr Lawrence Eugene Murr

163. 
     Torque-related lamellar carbide growth associated with annealing twins in 304 stainless steel

     Article • Acta Metallurgica et Materialia, February 1995, Elsevier

     Dr Lawrence Eugene Murr

164. 
     Imaging Geological Materials with the Acoustic Microscope

     Article • January 1995, Springer Science + Business Media

     Dr Lawrence Eugene Murr

165. 
     A review of: “Shock-Wave and High-Strain-Rate Phenomena in Materials’ Edited by Marc A. Meyers, Lawrence E. Murr and Karl P. Staudhammer

     Article • Materials and Manufacturing Processes, January 1995, Taylor & Francis

     Dr Lawrence Eugene Murr

166. 
     Deformation and deformation-specific microstructures associated with a hypervelocity impact crater in copper

     Article • Journal of Materials Science Letters, January 1995, Springer Science + Business Media

     Dr Lawrence Eugene Murr

167. 
     A comparison of shaped charge liner cone and recovered jet fragment microstructures to elucidate dynamic recrystallization phenomena

     Article • Scripta Metallurgica et Materialia, January 1995, Elsevier

     Dr Lawrence Eugene Murr

168. 
     Some observations of multi-layer penetration by micrometeoroid particles in low-earth orbit

     Article • Scripta Metallurgica et Materialia, November 1994, Elsevier

     Dr Lawrence Eugene Murr

169. 
     Residual microstructures in explosively formed tantalum penetrators

     Article • Scripta Metallurgica et Materialia, August 1994, Elsevier

     Dr Lawrence Eugene Murr

170. 
     Dynamic recrystallization in detonating tantalum shaped charges: A mechanism for extreme plastic deformation

     Article • Materials Characterization, July 1994, Elsevier

     Dr Lawrence Eugene Murr

171. 
     Measuring hypervelocity impact velocity from micrometeoroid crater geometry

     Article • International Journal of Impact Engineering, January 1994, Elsevier

     Dr Lawrence Eugene Murr

172. 
     Growth-specific carbide precipitation at annealing twins in 304 stainless steel

     Article • Scripta Metallurgica et Materialia, January 1994, Elsevier

     Dr Lawrence Eugene Murr

173. 
     Dynamic recrystallization in a tantalum shaped charge

     Article • Scripta Metallurgica et Materialia, November 1993, Elsevier

     Dr Lawrence Eugene Murr

174. 
     Dynamic recrystallization in the shaped charge regime

     Article • Scripta Metallurgica et Materialia, August 1993, Elsevier

     Dr Lawrence Eugene Murr

175. 
     Characterization and comparison of microstructures in the shaped-charge regime: copper and tantalum

     Article • Materials Characterization, April 1993, Elsevier

     Dr Lawrence Eugene Murr

176. 
     Hypervelocity particle penetration in multi-layered thermal blankets

     Article • Scripta Metallurgica et Materialia, February 1993, Elsevier

     Dr Lawrence Eugene Murr

177. 
     Transport critical current densities in shock-loaded and thermally processed YBa2Cu3O7

     Article • Journal of Materials Science Letters, January 1993, Springer Science + Business Media

     Dr Lawrence Eugene Murr

178. 
     Residual microstructure of a shaped-charge jet fragment

     Article • Journal of Materials Science, January 1993, Springer Science + Business Media

     Dr Lawrence Eugene Murr

179. 
     Novel technique for observing microstructural phenomena associated with micrometeoroid impact craters in stainless steel

     Article • Scripta Metallurgica et Materialia, October 1992, Elsevier

     Dr Lawrence Eugene Murr

180. 
     Cracking associated with micrometeoroid impact craters in anodized aluminum alloy clamps on LDEF

     Article • Scripta Metallurgica et Materialia, July 1992, Elsevier

     Dr Lawrence Eugene Murr

181. 
     Synthesis of isomorphous copper-nickel and immiscible copper-niobium materials by shock-compression

     Article • Scripta Metallurgica et Materialia, July 1992, Elsevier

     Dr Lawrence Eugene Murr

182. 
     A surface deformation region on mechanically polished surfaces of 316 stainless steels: Its effects on the sensitization of the alloy

     Article • Scripta Metallurgica et Materialia, February 1992, Elsevier

     Dr Lawrence Eugene Murr

183. 
     Electron and ion microscopy and microanalysis principles and applications, 2nd ed., revised and expanded by Lawrence E. Murr Marcel Dekker, New York (1991) ISBN 08247 8556‐8; 837 pages + xiv price: $195.00

     Article • Scanning, January 1992, Wiley

     Dr Lawrence Eugene Murr

184. 
     Mechanisms of deformation-induced grain boundary chromium depletion (sensitization) development in type 316 stainless steels

     Article • December 1991

     Dr Lawrence Eugene Murr

185. 
     Deformation Effects on Intragranular Carbide Precipitation and Transgranular Chromium Depletion in Type 316 Stainless Steels

     Article • CORROSION, December 1991, NACE International

     Dr Lawrence Eugene Murr

186. 
     Solution annealing effects on sensitization of 316 stainless steels

     Article • Scripta Metallurgica et Materialia, October 1991, Elsevier

     Dr Lawrence Eugene Murr

187. 
     Characterization of microstructures contributing to degradation of superconductivity in explosively fabricated high Tc superconductors

     Article • Materials Characterization, September 1991, Elsevier

     Dr Lawrence Eugene Murr

188. 
     Modeling superconductor degradation using magnetic levitation

     Article • Applied Physics Letters, March 1991, American Institute of Physics

     Dr Lawrence Eugene Murr

189. 
     Dislocations in palladium

     Article • Scripta Metallurgica et Materialia, March 1991, Elsevier

     Dr Lawrence Eugene Murr

190. 
     Effect of shock pressure on superconductivity in explosively fabricated Y—Ba—Cu—O/metal matrix composites

     Article • phys stat sol (a), February 1991, Wiley

     Dr Lawrence Eugene Murr

191. 
     Quantitative mapping of time-temperature-strain effects on sensitization of type 316 stainless steels

     Article • Scripta Metallurgica et Materialia, February 1991, Elsevier

     Dr Lawrence Eugene Murr

192. 
     Deformation site-specific nature of strain-induced transgranular carbide precipitation in type 316 stainless steels

     Article • Scripta Metallurgica et Materialia, February 1991, Elsevier

     Dr Lawrence Eugene Murr

193. 
     Deformation effects on chromium diffusivity and grain boundary chromium depletion development in type 316 stainless steels

     Article • Scripta Metallurgica et Materialia, February 1991, Elsevier

     Dr Lawrence Eugene Murr

194. 
     EXPLOSIVE PROCESSING OF BULK SUPERCONDUCTORS

     Article • Materials and Manufacturing Processes, January 1991, Taylor & Francis

     Dr Lawrence Eugene Murr

195. 
     Effects of space environment on structural materials: A preliminary study and development of materials characterization protocols

     Article • Journal of Materials Science, January 1991, Springer Science + Business Media

     Dr Lawrence Eugene Murr

196. 
     Correlating levitation height and diamagnetic shielding signal with residual superconductivity in explosively fabricated YBa2Cu3O7

     Article • Journal of Materials Science Letters, January 1991, Springer Science + Business Media

     Dr Lawrence Eugene Murr

197. 
     Improvement of the shock-wave-induced resistance-temperature signature for superconducting Y-Ba-Cu-O by silver additions

     Article • Scripta Metallurgica et Materialia, January 1991, Elsevier

     Dr Lawrence Eugene Murr

198. 
     Thermal recovery in shock-wave modified copper-oxide superconductors

     Article • Journal of Materials Science Letters, September 1990, Springer Science + Business Media

     Dr Lawrence Eugene Murr

199. 
     Dynamic consolidation of cylinders by oblique shock loading

     Article • Journal of Materials Science, May 1990, Springer Science + Business Media

     Dr Lawrence Eugene Murr

200. 
     Palladium metallurgy and cold fusion: Some remarks

     Article • Scripta Metallurgica et Materialia, April 1990, Elsevier

     Dr Lawrence Eugene Murr

201. 
     Shock-wave-induced degradation of superconductivity and localized lattice deffects in explosively fabricated YBa2Cu3O7

     Article • Solid State Communications, March 1990, Elsevier

     Dr Lawrence Eugene Murr

202. 
     Effects of deformation (strain) and heat treatment on grain boundary sensitization and precipitation in austenitic stainless steels

     Article • Materials Characterization, March 1990, Elsevier

     Dr Lawrence Eugene Murr

203. 
     A Review of: “METALLURGICAL APPLICATIONS OF SHOCK-WAVE AND HIGH-STRAIN-RATE PHENOMENA” edited by Lawrence E. Murr, Karl P. Staudhammer and Marc A. Meyers Marcel Dekker Inc., New York 1120 pages, hard cover, 1986.

     Article • Materials and Manufacturing Processes, January 1990, Taylor & Francis

     Dr Lawrence Eugene Murr

204. 
     EXPLOSIVE (SHOCK-WAVE) FABRICATION OF MONOLITHIC. METAL-MATRIX, SUPERCONDUCTING COMPOSITES

     Article • Materials and Manufacturing Processes, January 1989, Taylor & Francis

     Dr Lawrence Eugene Murr

205. 
     Interfacial phenomena and microstructural connectivity in explosively fabricated Y-Ba-Cu-O superconductors

     Article • Journal of Superconductivity, March 1988, Springer Science + Business Media

     Dr Lawrence Eugene Murr

206. 
     Half-Brained Ideas about Education: Thinking and Learning with Both the Left and Right Brain in a Visual Culture

     Article • Leonardo, January 1988, JSTOR

     Dr Lawrence Eugene Murr

207. 
     Shock-Induced Microstructures in Explosively Fabricated Superconductors

     Article • JOM, January 1988, Springer Science + Business Media

     Dr Lawrence Eugene Murr

208. 
     Shock-compression fabrication of high-temperature superconductor/ metal composite monoliths

     Article • Nature, September 1987, Springer Science + Business Media

     Dr Lawrence Eugene Murr

209. 
     The Roles of the Future Library

     Article • Library Hi Tech, March 1987, Emerald

     Dr Lawrence Eugene Murr

210. 
     Desktop Publishing: New Right Brain Documents

     Article • Library Hi Tech, January 1987, Emerald

     Dr Lawrence Eugene Murr

211. 
     Mapping Information Delivery Networks: The Objectives, the Methods, the Benefits, and the Model

     Article • Library Hi Tech, January 1986, Emerald

     Dr Lawrence Eugene Murr

212. 
     Comparison of residual microstructures for 304 stainless steel shock loaded in plane and cylindrical geometries: Implications for dynamic compaction and forming

     Article • Acta Metallurgica, April 1985, Elsevier

     Dr Lawrence Eugene Murr

213. 
     Heat treatment of explosively consolidated molybedenum: TEM studies

     Article • Journal of Materials Science Letters, January 1984, Springer Science + Business Media

     Dr Lawrence Eugene Murr

214. 
     Explosive consolidation of an amorphous iron-base powder

     Article • Scripta Metallurgica, November 1983, Elsevier

     Dr Lawrence Eugene Murr

215. 
     Modern developments in coatings characterization and microanalysis involving electron and ion beam applications

     Article • Thin Solid Films, October 1983, Elsevier

     Dr Lawrence Eugene Murr

216. 
     The role of iron in metal sulfide leaching by galvanic interaction

     Article • Biotechnology and Bioengineering, April 1983, Wiley

     Dr Lawrence Eugene Murr

217. 
     Comments on: Deformation twins in punched specimens of a 321 steel

     Article • Scripta Metallurgica, March 1983, Elsevier

     Dr Lawrence Eugene Murr

218. 
     Nucleation and evolution of strain-induced martensitic (b.c.c.) embryos and substructure in stainless steel: A transmission electron microscope study

     Article • Acta Metallurgica, February 1983, Elsevier

     Dr Lawrence Eugene Murr

219. 
     Propagation of Stress Waves in Metals

     Article • January 1983, Springer Science + Business Media

     Dr Lawrence Eugene Murr

220. 
     Metallurgical Effects of Shock and Pressure Waves in Metals

     Article • January 1983, Springer Science + Business Media

     Dr Lawrence Eugene Murr

221. 
     Fundamental studies of the contribution of galvanic interaction to acid-bacterial leaching of mixed metal sulfides

     Article • Hydrometallurgy, January 1983, Elsevier

     Dr Lawrence Eugene Murr

222. 
     Structure and hardness of explosively consolidated molybdenum

     Article • Materials Science and Engineering, January 1983, Elsevier

     Dr Lawrence Eugene Murr

223. 
     Coal desulfurization by leaching involving acidophilic and thermophilic microorganisms

     Article • Biotechnology and Bioengineering, October 1982, Wiley

     Dr Lawrence Eugene Murr

224. 
     Structure and properties of tensile cracks in stainless steel films: In-situ, high-voltage electron microscope studies

     Article • International Journal of Fracture, October 1982, Springer Science + Business Media

     Dr Lawrence Eugene Murr

225. 
     Electron diffraction studies of thin secondary product films on electrochemically reacting metal sulfides

     Article • Thin Solid Films, September 1982, Elsevier

     Dr Lawrence Eugene Murr

226. 
     Characterization of leaching reactions involving metal sulfides in wastes and concentrates utilizing electron microscopy and microanalysis techniques

     Article • Resources and Conservation, August 1982, Elsevier

     Dr Lawrence Eugene Murr

227. 
     α1-Martensite morphology in shock-loaded type 304 stainless steel

     Article • Scripta Metallurgica, June 1982, Elsevier

     Dr Lawrence Eugene Murr

228. 
     Interfacial phenomena in solar materials

     Article • Materials Science and Engineering, April 1982, Elsevier

     Dr Lawrence Eugene Murr

229. 
     Effects of Strain State and Strain Rate on Deformation-Induced Transformation in 304 Stainless Steel: Part II. Microstructural Study

     Article • April 1982

     Dr Lawrence Eugene Murr

230. 
     Coal desulfurization by leaching involving acidophilic and thermophilic microorganisms

     Article • Biotechnology and Bioengineering, March 1982, Wiley

     Dr Lawrence Eugene Murr

231. 
     Acid‐bacterial and ferric sulfate leaching of pyrite single crystals

     Article • Biotechnology and Bioengineering, January 1982, Wiley

     Dr Lawrence Eugene Murr

232. 
     Strain-induced dislocation emission from grain boundaries in stainless steel

     Article • Materials Science and Engineering, November 1981, Elsevier

     Dr Lawrence Eugene Murr

233. 
     Laser-induced phase transitions in amorphous Fe80B20 alloy

     Article • Materials Science and Engineering, November 1981, Elsevier

     Dr Lawrence Eugene Murr

234. 
     Shock-Wave Consolidation of Rapidly Solidified Superalloy Powders

     Article • JOM, October 1981, Springer Science + Business Media

     Dr Lawrence Eugene Murr

235. 
     Dynamic in situ high voltage electron microscopy studies of tensile cracks in thin stainless steel films

     Article • Thin Solid Films, October 1981, Elsevier

     Dr Lawrence Eugene Murr

236. 
     Interfacial phenomena in solar materials

     Article • Solar Energy Materials, June 1981, Elsevier

     Dr Lawrence Eugene Murr

237. 
     Explosive shock deformation of metallic glasses

     Article • Materials Science and Engineering, June 1981, Elsevier

     Dr Lawrence Eugene Murr

238. 
     Kinetic effects of particle-size and crystal dislocation density on the dichromate leaching of chalcopyrite

     Article • June 1981

     Dr Lawrence Eugene Murr

239. 
     Microstructural and mechanical property evaluation of black-chrome coated solar collectors — II

     Article • Solar Energy Materials, March 1981, Elsevier

     Dr Lawrence Eugene Murr

240. 
     Microstructural and mechanical property evaluation of zinc oxide coated solar collectors

     Article • Solar Energy Materials, March 1981, Elsevier

     Dr Lawrence Eugene Murr

241. 
     Shock Waves and High-Strain-Rate Phenomena in Metals

     Article • January 1981, Springer Science + Business Media

     Dr Lawrence Eugene Murr

242. 
     Defect Generation in Shock-Wave Deformation

     Article • January 1981, Springer Science + Business Media

     Dr Lawrence Eugene Murr

243. 
     The Attenuation of Shock Waves in Nickel

     Article • January 1981, Springer Science + Business Media

     Dr Lawrence Eugene Murr

244. 
     Residual Microstructure - Mechanical Property Relationships in Shock-Loaded Metals and Alloys

     Article • January 1981, Springer Science + Business Media

     Dr Lawrence Eugene Murr

245. 
     Repeated Shock Loading of Nickel and Stainless Steel

     Article • January 1981, Springer Science + Business Media

     Dr Lawrence Eugene Murr

246. 
     Effects of Strain Rate on Deformation-Induced Martensite in 304 Stainless Steel

     Article • January 1981, Springer Science + Business Media

     Dr Lawrence Eugene Murr

247. 
     Effects of Peak Pressure, Pulse Duration, and Repeated Loading on the Residual Structure and Properties of Shock Deformed Metals and Alloys

     Article • January 1981, Springer Science + Business Media

     Dr Lawrence Eugene Murr

248. 
     Interfacial Energetics in Metal-Metal, Metal-Ceramic, Metal-Semiconductor, and Related Solid-Solid and Liquid-Solid Systems

     Article • January 1981, Springer Science + Business Media

     Dr Lawrence Eugene Murr

249. 
     Morphological and ultrastructural study of the cell envelope of thermophilic and acidophilic microorganisms as compared to Thiobacillus ferrooxidans

     Article • Biotechnology and Bioengineering, December 1980, Wiley

     Dr Lawrence Eugene Murr

250. 
     A form of hall-petch law for the strength of glassy metals

     Article • phys stat sol (a), October 1980, Wiley

     Dr Lawrence Eugene Murr

251. 
     Characterization of selective solar absorber microstructures: Electron microscope studies

     Article • Thin Solid Films, September 1980, Elsevier

     Dr Lawrence Eugene Murr

252. 
     Field ion microscope studies of the propagation of substrate grain boundaries into an overgrowth

     Article • Thin Solid Films, September 1980, Elsevier

     Dr Lawrence Eugene Murr

253. 
     Effect of prestrain and stacking-fault energy on the application of the Hall-Petch relation in fcc metals and alloys

     Article • Metallography, September 1980, Elsevier

     Dr Lawrence Eugene Murr

254. 
     Kinetics of leaching chalcopyrite-bearing waste rock with thermophilic and mesophilic bacteria

     Article • Hydrometallurgy, June 1980, Elsevier

     Dr Lawrence Eugene Murr

255. 
     The effect of prior deformation on the residual microstructure of explosively deformed stainless steels

     Article • Materials Science and Engineering, June 1980, Elsevier

     Dr Lawrence Eugene Murr

256. 
     A transmission electron microscopy study of particulate concentrations in seven individual snowflakes

     Article • Cold Regions Science and Technology, May 1980, Elsevier

     Dr Lawrence Eugene Murr

257. 
     Lixiviant alteration by fungal absorption of iron during acid-bacterial leaching of pure pyrite

     Article • March 1980

     Dr Lawrence Eugene Murr

258. 
     Desulfurization of Coal by Thiobacillus Ferrooxidans

     Article • January 1980, Springer Science + Business Media

     Dr Lawrence Eugene Murr

259. 
     Desulfurization of Coal by Thiobacillus Ferrooxidans

     Article • January 1980, Springer Science + Business Media

     Dr Lawrence Eugene Murr

260. 
     Observations of a natural thermophilic microorganism in the leaching of a large, experimental, copper-bearing waste body

     Article • December 1979

     Dr Lawrence Eugene Murr

261. 
     Microstructural and mechanical property evaluation of black-chrome coated solar collectors

     Article • Solar Energy Materials, December 1979, Elsevier

     Dr Lawrence Eugene Murr

262. 
     Future microelectronic devices: materials aspects and interfacial phenomena

     Article • Microelectronics Journal, November 1979, Elsevier

     Dr Lawrence Eugene Murr

263. 
     Anomalous residual shock hardening in nickel and stainless steel at a short pulse duration

     Article • Scripta Metallurgica, November 1979, Elsevier

     Dr Lawrence Eugene Murr

264. 
     Crystal defects in coatings and their influence on coating properties

     Article • Thin Solid Films, November 1979, Elsevier

     Dr Lawrence Eugene Murr

265. 
     Observations of solution transport, permeability, and leaching reactions in large, controlled, copper-bearing waste bodies

     Article • Hydrometallurgy, October 1979, Elsevier

     Dr Lawrence Eugene Murr

266. 
     Comparison of copper solubilization from chalcopyrite waste using thiobacillus ferrooxidans and a natural thermophilic microorganism: Laboratory studies

     Article • Biotechnology and Bioengineering, September 1979, Wiley

     Dr Lawrence Eugene Murr

267. 
     Effect of Grain size, dislocation cell size and deformation twin spacing on the residual strengthening of shock-loaded nickel

     Article • Materials Science and Engineering, July 1979, Elsevier

     Dr Lawrence Eugene Murr

268. 
     Effect of environmental parameters on the efficiency of biodegradation of basalt rock by fungi

     Article • Biotechnology and Bioengineering, May 1979, Wiley

     Dr Lawrence Eugene Murr

269. 
     Brittle fracture in polycrystalline Ir-0.3 pct W

     Article • April 1979

     Dr Lawrence Eugene Murr

270. 
     Coloring of natural fluorites

     Article • phys stat sol (a), March 1979, Wiley

     Dr Lawrence Eugene Murr

271. 
     Quantitative evidence for dislocation emission from grain boundaries

     Article • Scripta Metallurgica, March 1979, Elsevier

     Dr Lawrence Eugene Murr

272. 
     Interactive effects of shock loading parameters on the substructure and mechanical properties of nickel and stainless steel

     Article • Materials Science and Engineering, March 1979, Elsevier

     Dr Lawrence Eugene Murr

273. 
     The role of substrate dislocations and grain boundaries in the nucleation and growth of thin electrochemical overgrowths. TEM and FIM studies

     Article • phys stat sol (a), February 1979, Wiley

     Dr Lawrence Eugene Murr

274. 
     An electron microscopic study of crystalline turquoise

     Article • Journal of Materials Science, February 1979, Springer Science + Business Media

     Dr Lawrence Eugene Murr

275. 
     Shock-induced cracks in molybdenum sheet

     Article • Journal of Applied Physics, February 1979, American Institute of Physics

     Dr Lawrence Eugene Murr

276. 
     Influence of deposit morphology on the kinetics of copper cementation on pure iron

     Article • Hydrometallurgy, January 1979, Elsevier

     Dr Lawrence Eugene Murr

277. 
     Effect of Grain Size and Deformation-induced Grain Refinement on the Residual Strength of Shock-loaded Metals and Alloys

     Article • January 1979, Elsevier

     Dr Lawrence Eugene Murr

278. 
     An Electron Microscopic Study of Nucleation and Growth in Electrochemical Displacement Reactions: A Comparison of the Cu/Fe and Cu/AI Cementation Systems

     Article • Metallurgical Transactions B, December 1978, Springer Science + Business Media

     Dr Lawrence Eugene Murr

279. 
     The contribution of deformation twins to yield stress: The Hall-Petch law for inter-twin spacing

     Article • Scripta Metallurgica, November 1978, Elsevier

     Dr Lawrence Eugene Murr

280. 
     Galvanic interaction between chalcopyrite and pyrite during bacterial leaching of low-grade waste

     Article • Hydrometallurgy, October 1978, Elsevier

     Dr Lawrence Eugene Murr

281. 
     Explosive-shock deformation of natural chalcopyrite (CuFeS2)

     Article • Journal of Materials Science, October 1978, Springer Science + Business Media

     Dr Lawrence Eugene Murr

282. 
     Characterization of copper nucleation and growth from aqueous solution on aluminum: A transmission electron microscopy study of copper cementation

     Article • Thin Solid Films, October 1978, Elsevier

     Dr Lawrence Eugene Murr

283. 
     Effect of shock pressure, pulse duration, and grain size on shock-deformation twinning in molybdenum

     Article • Materials Science and Engineering, October 1978, Elsevier

     Dr Lawrence Eugene Murr

284. 
     A model for the formation of annealing twins in F.C.C. metals and alloys

     Article • Acta Metallurgica, June 1978, Elsevier

     Dr Lawrence Eugene Murr

285. 
     Summary of pulse duration effects on the shock-hardening of metals and alloys

     Article • Scripta Metallurgica, June 1978, Elsevier

     Dr Lawrence Eugene Murr

286. 
     Effects of the source of chloride ion and surface corrosion patterns on the kinetics of the copper-aluminum cementation system

     Article • Hydrometallurgy, June 1978, Elsevier

     Dr Lawrence Eugene Murr

287. 
     Experimental and theoretical observations on the relationship between dislocation cell size, dislocation density, residual hardness, peak pressure and pulse duration in shock-loaded nickel

     Article • Acta Metallurgica, May 1978, Elsevier

     Dr Lawrence Eugene Murr

288. 
     Effect of peak pressure and pressure-pulse duration on crystallographic transformations in shock-loaded metals and alloys

     Article • Scripta Metallurgica, May 1978, Elsevier

     Dr Lawrence Eugene Murr

289. 
     The influence of grain boundary ledge density on the flow stress in nickel

     Article • Materials Science and Engineering, April 1978, Elsevier

     Dr Lawrence Eugene Murr

290. 
     Laser-shock-induced microstructural changes and a comparison with explosive-shock-induced phenomena in metals: Field-ion and electron microscopic studies

     Article • Journal of Applied Physics, April 1978, American Institute of Physics

     Dr Lawrence Eugene Murr

291. 
     The effects of kinetic variables on the structure of copper deposits cemented on pure aluminum discs: A scanning electron microscopic study

     Article • Hydrometallurgy, March 1978, Elsevier

     Dr Lawrence Eugene Murr

292. 
     Work jardening and the pressure dependence of dislocation density and arrangements in shock loaded nickel and copper

     Article • Scripta Metallurgica, February 1978, Elsevier

     Dr Lawrence Eugene Murr

293. 
     A critical evaluation of the effect of electric fields on the residual structure of vapor-deposited metal films

     Article • Journal of Applied Physics, February 1978, American Institute of Physics

     Dr Lawrence Eugene Murr

294. 
     Techniques for Measuring Adhesive Energies in Metal/Ceramic Systems

     Article • January 1978, ASTM International

     Dr Lawrence Eugene Murr

295. 
     Contrast phenomena and the identification of grain boundary ledges

     Article • Metallography, January 1978, Elsevier

     Dr Lawrence Eugene Murr

296. 
     DIRECT OBSERVATIONS OF BACTERIA AND QUANTITATIVE STUDIES OF THEIR CATALYTIC ROLE IN THE LEACHING OF LOW-GRADE, COPPER-BEARING WASTE

     Article • January 1978, Elsevier

     Dr Lawrence Eugene Murr

297. 
     THE USE OF LARGE-SCALE TEST FACILITIES IN STUDIES OF THE ROLE OF MICROORGANISMS IN COMMERCIAL LEACHING OPERATIONS

     Article • January 1978, Elsevier

     Dr Lawrence Eugene Murr

298. 
     An electron microscopy study of particulates present in individual raindrops

     Article • Journal of Geophysical Research Atmospheres, July 1977, American Geophysical Union (AGU)

     Dr Lawrence Eugene Murr

299. 
     Transmission electron microscopic study of defect structure in natural chalcopyrite (CuFeS2)

     Article • Journal of Materials Science, July 1977, Springer Science + Business Media

     Dr Lawrence Eugene Murr

300. 
     The nucleation and growth of thin films on sodium chloride cleavage steps

     Article • Thin Solid Films, May 1977, Elsevier

     Dr Lawrence Eugene Murr

301. 
     Variation of laser mirror metal microstructure and its effect on reflectivity at 10.6 μm

     Article • phys stat sol (a), March 1977, Wiley

     Dr Lawrence Eugene Murr

302. 
     Fundamental studies of the structure and growth of electrodeposited nickel

     Article • Thin Solid Films, September 1976, Elsevier

     Dr Lawrence Eugene Murr

303. 
     Direct observations of selective attachment of bacteria on low-grade sulfide ores and other mineral surfaces

     Article • Hydrometallurgy, July 1976, Elsevier

     Dr Lawrence Eugene Murr

304. 
     Authors’ Reply

     Article • June 1976

     Dr Lawrence Eugene Murr

305. 
     Variations in grain boundary ledge structure with thermo-mechanical treatment in high-purity aluminum

     Article • Scripta Metallurgica, May 1976, Elsevier

     Dr Lawrence Eugene Murr

306. 
     Vacancies and vacancy clusters in shock-loaded molybdenum: Direct observations by transmission electron and field-ion microscopy

     Article • Applied Physics Letters, April 1976, American Institute of Physics

     Dr Lawrence Eugene Murr

307. 
     The temperature dependence of adhesive energy in some metal-ceramic systems

     Article • Scripta Metallurgica, April 1976, Elsevier

     Dr Lawrence Eugene Murr

308. 
     The role of grain-boundary structure in shock-induced spallation of molybdenum

     Article • Journal of Applied Physics, April 1976, American Institute of Physics

     Dr Lawrence Eugene Murr

309. 
     Direct observations of vacancies and vacancy-type defects in molybdenum following uniaxial shock-wave compression

     Article • Acta Metallurgica, March 1976, Elsevier

     Dr Lawrence Eugene Murr

310. 
     Variation of the solid-solid-nickel-thoria interfacial free energy with temperature

     Article • Metallography, February 1976, Elsevier

     Dr Lawrence Eugene Murr

311. 
     Surface free energy of nickel and stainless steel at temperatures above the melting point

     Article • Journal of Materials Science, February 1976, Springer Science + Business Media

     Dr Lawrence Eugene Murr

312. 
     The detection and analysis of particulates in municipal water supplies by transmission electron microscopy

     Article • Water Research, January 1976, Elsevier

     Dr Lawrence Eugene Murr

313. 
     The shock loading of polycrystalline beryllium: residual microstucture and the effects of microstructure on internal spallation

     Article • Journal of Materials Science, December 1975, Springer Science + Business Media

     Dr Lawrence Eugene Murr

314. 
     Laser-induced fracture in silicon

     Article • Journal of Materials Science, September 1975, Springer Science + Business Media

     Dr Lawrence Eugene Murr

315. 
     A simple kinetic model for sulfuric acid leaching of copper from chrysocolla

     Article • September 1975

     Dr Lawrence Eugene Murr

316. 
     Bacterial attachment to molybdenite: An electron microscope study

     Article • September 1975

     Dr Lawrence Eugene Murr

317. 
     The nature of microstructural voids and occlusion-like contrast phenomena in MoS2

     Article • Metallography, August 1975, Elsevier

     Dr Lawrence Eugene Murr

318. 
     Measurement of the high-temperature self-diffusion coefficients in sintered nickel

     Article • Scripta Metallurgica, August 1975, Elsevier

     Dr Lawrence Eugene Murr

319. 
     Effect of shock-stress duration on the residual structure and hardness of nickel, chromel and inconel

     Article • Materials Science and Engineering, May 1975, Elsevier

     Dr Lawrence Eugene Murr

320. 
     Some observations of grain boundary ledges and ledges as dislocation sources in metals and alloys

     Article • March 1975

     Dr Lawrence Eugene Murr

321. 
     Measurement of the shear modulus for Ni from sintering experiments in the range 1320–1420°C

     Article • Scripta Metallurgica, March 1975, Elsevier

     Dr Lawrence Eugene Murr

322. 
     An electron microscope study of coarse M23C6 phase regions in a two-phase alloy steel

     Article • Scripta Metallurgica, March 1975, Elsevier

     Dr Lawrence Eugene Murr

323. 
     Effect of stress amplitude and stress duration on twinning and phase transformations in shock-loaded and cold-rolled 304 stainless steel

     Article • Materials Science and Engineering, January 1975, Elsevier

     Dr Lawrence Eugene Murr

324. 
     Comments on “The surface and grain boundary energies of iron, cobalt and Nickel”

     Article • Materials Science and Engineering, January 1975, Elsevier

     Dr Lawrence Eugene Murr

325. 
     Effect of shock-stress duration on the hardening of CuAl alloys

     Article • Scripta Metallurgica, December 1974, Elsevier

     Dr Lawrence Eugene Murr

326. 
     Interfacial energetics in the TD-nickel and TD-nichrome systems

     Article • Journal of Materials Science, August 1974, Springer Science + Business Media

     Dr Lawrence Eugene Murr

327. 
     Comments on: Temperature dependence of surface energy of liquid iron and nickel

     Article • Scripta Metallurgica, June 1974, Elsevier

     Dr Lawrence Eugene Murr

328. 
     Yielding and grain-boundary ledges: Some comments on the Hall-Petch relation

     Article • Applied Physics Letters, June 1974, American Institute of Physics

     Dr Lawrence Eugene Murr

329. 
     Image overlap in field-ion microscopy

     Article • phys stat sol (a), May 1974, Wiley

     Dr Lawrence Eugene Murr

330. 
     A technique for selected-area observations in silicon wafers by transmission electron microscopy

     Article • Journal of Materials Science, May 1974, Springer Science + Business Media

     Dr Lawrence Eugene Murr

331. 
     Transmission electron microscope study of crystal defects in natural fluorite

     Article • phys stat sol (a), March 1974, Wiley

     Dr Lawrence Eugene Murr

332. 
     Ordered Lattice Defects in Colored Fluorite: Direct Observations

     Article • Science, January 1974, American Association for the Advancement of Science

     Dr Lawrence Eugene Murr

333. 
     Residual crystallinity of vapor-deposited tin films

     Article • Thin Solid Films, January 1974, Elsevier

     Dr Lawrence Eugene Murr

334. 
     Characterization of natural pyrolusite by electron microscopy

     Article • Contributions to Mineralogy and Petrology, January 1974, Springer Science + Business Media

     Dr Lawrence Eugene Murr

335. 
     Note on the electropolishing of iridium foils for transmission electron microscopy—some additional techniques

     Article • Journal of the Less Common Metals, January 1974, Elsevier

     Dr Lawrence Eugene Murr

336. 
     Measurement of interfacial energy of adhesion by scanning electron microscopy

     Article • Materials Science and Engineering, November 1973, Elsevier

     Dr Lawrence Eugene Murr

337. 
     The role of depleted zones in neutron irradiated metals

     Article • phys stat sol (a), June 1973, Wiley

     Dr Lawrence Eugene Murr

338. 
     Twin boundary energetics in pure aluminium

     Article • Acta Metallurgica, June 1973, Elsevier

     Dr Lawrence Eugene Murr

339. 
     Measurement of interfacial free energies and associated temperature coefficients in 304 stainless steel

     Article • Acta Metallurgica, May 1973, Elsevier

     Dr Lawrence Eugene Murr

340. 
     Scanning electron microscope study of laser-damaged beryllium thin films

     Article • Journal of Applied Physics, April 1973, American Institute of Physics

     Dr Lawrence Eugene Murr

341. 
     Leaching: Use of a Thermophilic and Chemoautotrophic Microbe

     Article • Science, February 1973, American Association for the Advancement of Science

     Dr Lawrence Eugene Murr

342. 
     Comments on “the observation of face centered cubic erbium in thin films and its oxidation”

     Article • Journal of the Less Common Metals, February 1973, Elsevier

     Dr Lawrence Eugene Murr

343. 
     Direct observations of dislocations in splat-cooled Co5Pr

     Article • Journal of Materials Science, November 1972, Springer Science + Business Media

     Dr Lawrence Eugene Murr

344. 
     Electron microscopy of nucleation and growth of indium and tin films

     Article • September 1972, Taylor & Francis

     Dr Lawrence Eugene Murr

345. 
     Reply to comments by Johari and Howes on earthquake-fractures

     Article • Metallography, August 1972, Elsevier

     Dr Lawrence Eugene Murr

346. 
     Significance of Electric Fields on the Growth of Thin Metal Films

     Article • Applied Physics Letters, June 1972, American Institute of Physics

     Dr Lawrence Eugene Murr

347. 
     Nucleation and growth characteristics of palladium and indium thin films

     Article • April 1972

     Dr Lawrence Eugene Murr

348. 
     Activation energy and saturation density for In and Sn thin films on NaCl substrates

     Article • Scripta Metallurgica, April 1972, Elsevier

     Dr Lawrence Eugene Murr

349. 
     Fossilization of electrical corona streamers from silicon nitride crystals in the electron microscope

     Article • March 1972, Taylor & Francis

     Dr Lawrence Eugene Murr

350. 
     Temperature coefficient of twin-boundary energy: The determination of stacking-fault energy from the coherent twin-boundary energy in pure F.C.C. metals

     Article • Scripta Metallurgica, March 1972, Elsevier

     Dr Lawrence Eugene Murr

351. 
     A field-ion microscope study of vapour-deposited platinum

     Article • Thin Solid Films, February 1972, Elsevier

     Dr Lawrence Eugene Murr

352. 
     An Electron Microscope Study of Configurational Equilibrium at Twin-Grain Boundary Intersections in FCC Metals

     Article • January 1972, Springer Science + Business Media

     Dr Lawrence Eugene Murr

353. 
     Scanning electron microscopy of earthquake-induced rail fractures

     Article • Metallography, December 1971, Elsevier

     Dr Lawrence Eugene Murr

354. 
     Field Ion Microscopy of Graphite Fibers

     Article • Journal of Applied Physics, August 1971, American Institute of Physics

     Dr Lawrence Eugene Murr

355. 
     Measurement of absolute interfacial free energies in a NiCr alloy

     Article • Surface Science, June 1971, Elsevier

     Dr Lawrence Eugene Murr

356. 
     Deformation substructures and terminal properties of explosively-loaded thin-walled stainless-steel cylinders

     Article • May 1971, Taylor & Francis

     Dr Lawrence Eugene Murr

357. 
     Comparison of recovery, recrystallization, and grain-growth characteristics in shock-loaded, explosively-expanded, and cold-rolled inconel 600

     Article • Materials Science and Engineering, May 1971, Elsevier

     Dr Lawrence Eugene Murr

358. 
     A Simple, Continuously Pumped Field-Ion Microscope

     Article • Journal of Vacuum Science and Technology, March 1971, American Vacuum Society

     Dr Lawrence Eugene Murr

359. 
     Effects of substrate temperature, pressure, and high evaporation rates on nucleation, epitaxy, and structure of palladium thin films

     Article • Thin Solid Films, February 1971, Elsevier

     Dr Lawrence Eugene Murr

360. 
     Origin of image streaks in field ion microscopy

     Article • phys stat sol (a), January 1971, Wiley

     Dr Lawrence Eugene Murr

361. 
     Relative interfacial free energy measurements in Cu and Cu-Al alloys

     Article • phys stat sol (a), October 1970, Wiley

     Dr Lawrence Eugene Murr

362. 
     Thermal recovery of explosive shock-loaded Ni, TD-Ni, Chromel-A, Inconel 600 and TD-NiCr

     Article • Acta Metallurgica, October 1970, Elsevier

     Dr Lawrence Eugene Murr

363. 
     Interfacial energy and structure in F.C.C. metals and alloys

     Article • The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics, September 1970, Taylor & Francis

     Dr Lawrence Eugene Murr

364. 
     A Comparison of grain-boundary and matrix-crystalline fracture in Ti-Mo wires by scanning electron microscopy

     Article • Journal of Materials Science, June 1970, Springer Science + Business Media

     Dr Lawrence Eugene Murr

365. 
     Structure and energetics of vapor-deposited Indium films

     Article • phys stat sol (a), March 1970, Wiley

     Dr Lawrence Eugene Murr

366. 
     Comparison of residual defect structures in explosive shock-hardened Inconel 600 and Chromel-A by transmission electron microscopy

     Article • Micron (1969), March 1970, Elsevier

     Dr Lawrence Eugene Murr

367. 
     The role of point defects in the thermal recovery of shock-loaded metals and alloys

     Article • Scripta Metallurgica, March 1970, Elsevier

     Dr Lawrence Eugene Murr

368. 
     A terminal ballistics application of transmission electron microscopy: The anatomy of a bullet hole

     Article • Journal of Materials Science, January 1970, Springer Science + Business Media

     Dr Lawrence Eugene Murr

369. 
     Stacking-fault anomalies and the measurement of stacking-fault free energy in f.c.c. thin films

     Article • Thin Solid Films, December 1969, Elsevier

     Dr Lawrence Eugene Murr

370. 
     Configurational equilibrium at twin-grain boundary intersections in F.C.C metals and alloys, and the measurement of relative interfacial torque

     Article • December 1969, Taylor & Francis

     Dr Lawrence Eugene Murr

371. 
     Discussion of: “The mechanism of grain boundary migration”

     Article • Scripta Metallurgica, November 1969, Elsevier

     Dr Lawrence Eugene Murr

372. 
     Comments on: “Determination of absolute solid-liquid interfacial free energies in metals”

     Article • Scripta Metallurgica, November 1969, Elsevier

     Dr Lawrence Eugene Murr

373. 
     Shock Deformation of Inconel 600 Alloy: Effect of Fine Coherent Precipitates on Explosive-Shock Hardening

     Article • Journal of Applied Physics, August 1969, American Institute of Physics

     Dr Lawrence Eugene Murr

374. 
     The role of crystallographic misorientation in measurements of relative twin/grain boundary free energy ratios

     Article • Scripta Metallurgica, June 1969, Elsevier

     Dr Lawrence Eugene Murr

375. 
     Optical properties of thin films of Ni, Cu, and Ni+60% Cu in the wavelength range 3000–6000 Å

     Article • Thin Solid Films, May 1969, Elsevier

     Dr Lawrence Eugene Murr

376. 
     Addendum to: Grain growth kinetics in erbium oxide films

     Article • Scripta Metallurgica, March 1969, Elsevier

     Dr Lawrence Eugene Murr

377. 
     Reply to comments on: “investigation of relative interfacial free energies in 304 stainless steel by electron transmission and diffraction microscopy”

     Article • Scripta Metallurgica, January 1969, Elsevier

     Dr Lawrence Eugene Murr

378. 
     Energetics of Grain-Boundary Triple Junctions and Corner-Twinned Junctions: Transmission Electron Microscope Studies

     Article • Journal of Applied Physics, November 1968, American Institute of Physics

     Dr Lawrence Eugene Murr

379. 
     Investigation of relative interfacial free energies in 304 stainless steel by electron transmission and diffraction microscopy

     Article • Acta Metallurgica, September 1968, Elsevier

     Dr Lawrence Eugene Murr

380. 
     Relative interfacial free energies in pure nickel, dispersion hardened nickel, and a precipitation hardened nickel-base alloy

     Article • January 1968, Taylor & Francis

     Dr Lawrence Eugene Murr

381. 
     Investigation of grain boundary energetics in Er2O3 thin foils by transmission electron microscopy

     Article • physica status solidi (b), January 1968, Wiley

     Dr Lawrence Eugene Murr

382. 
     Investigation of optical absorption and the structure of thin metal foils

     Article • Materials Research Bulletin, August 1967, Elsevier

     Dr Lawrence Eugene Murr

383. 
     1.8 Electron microscopy investigation of the relationship of deposition parameter to structural characteristics in metal and alloy films, vapour deposited in high and ultrahigh vacuum

     Article • Vacuum, June 1967, Elsevier

     Dr Lawrence Eugene Murr

384. 
     Study of Erbium Thin Film Oxidation in the Electron Microscope

     Article • physica status solidi (b), January 1967, Wiley

     Dr Lawrence Eugene Murr

385. 
     Calibration and Use of an Electron Microscope for Precision Micromeasurements in Thin Film Materials

     Article • physica status solidi (b), January 1967, Wiley

     Dr Lawrence Eugene Murr

386. 
     Physiological stimulation of plants using delayed and regulated electric field environments

     Article • International Journal of Biometeorology, November 1966, Springer Science + Business Media

     Dr Lawrence Eugene Murr

387. 
     The biophysics of plant growth in a reversed electrostatic field: A comparison with conventional electrostatic and electrokinetic field growth responses

     Article • International Journal of Biometeorology, November 1966, Springer Science + Business Media

     Dr Lawrence Eugene Murr

388. 
     Effects of vacuum environment on the sub-structure of evaporated F.C.C. metal films

     Article • July 1966, Taylor & Francis

     Dr Lawrence Eugene Murr

389. 
     Plant Growth Response in an Electrokinetic Field

     Article • Nature, September 1965, Springer Science + Business Media

     Dr Lawrence Eugene Murr

390. 
     Biophysics of Plant Growth in an Electrostatic Field

     Article • Nature, May 1965, Springer Science + Business Media

     Dr Lawrence Eugene Murr

391. 
     THE BIOPHYSICS OF PLANT ELECTROTROPISM*

     Article • Transactions of the New York Academy of Sciences, May 1965, Wiley

     Dr Lawrence Eugene Murr

392. 
     The Application of Color Photography to Transmission Electron Microscope Studies of Thin Metal Foils

     Article • physica status solidi (b), January 1965, Wiley

     Dr Lawrence Eugene Murr

393. 
     A continuously pumped ultra-high vacuum-sorption system for the preparation of highly ordered single-crystal metal foils

     Article • British Journal of Applied Physics, December 1964, Institute of Physics Publishing

     Dr Lawrence Eugene Murr

394. 
     Mechanism of Plant-Cell Damage in an Electrostatic Field

     Article • Nature, March 1964, Springer Science + Business Media

     Dr Lawrence Eugene Murr

395. 
     Apparatus for the study of fatigue of thin metal films in the Hitachi H.U. 11 electron microscope

     Article • Journal of Scientific Instruments, December 1963, Institute of Physics Publishing

     Dr Lawrence Eugene Murr

396. 
     Plant Growth Response in a Simulated Electric Field-environment

     Article • Nature, November 1963, Springer Science + Business Media

     Dr Lawrence Eugene Murr