All Stories

  1. Novel sintering-free scaffolds obtained by additive manufacturing for concurrent bone regeneration and drug delivery: Proof of concept
  2. Structure and conductivity of Nd6MoO12-based potential electron–proton conductors under dry and wet redox conditions
  3. Linking sintering stresses to nano modification in the microstructure of BaLa4Ti4O15 by transmission electron microscopy
  4. Influence of the Ca/P ratio and cooling rate on the allotropic α↔β-tricalcium phosphate phase transformations
  5. Biocompatibility and antimicrobial activity of biphasic calcium phosphate powders doped with metal ions for regenerative medicine
  6. Corrigendum to “Electrical characterization of La 9.33 Si 2 Ge 4 O 26 oxyapatite for prospective intermediate-temperature solid oxide fuel cells” [Ceram. Int. 43 (2017) 3847–3853]
  7. Design of NiAl2O4 cellular monoliths for catalytic applications
  8. Electrical characterization of La9.33Si2Ge4O26 oxyapatite for prospective intermediate-temperature solid oxide fuel cells
  9. Injectable MnSr-doped brushite bone cements with improved biological performance
  10. Methodology for Analysis of the Reactivity of Coal Fly Ash Using Selective Dissolution by Hydrofluoric Acid
  11. Quality criteria for phase change materials selection
  12. Rheological Behavior of Paraffin-Alumina Emulsions and their Microstructural Effects
  13. Effect of Pr3+/Pr4+ ratio on the oxygen ion transport and thermomechanical properties of the pyrochlore and fluorite phases in the ZrO2–Pr2O3 system
  14. Application of electrochemical impedance spectroscopy (EIS) to monitor the corrosion of reinforced concrete: A new approach
  15. Self-functionalization of cellular alumina monoliths in hydrothermal conditions
  16. Statistical analysis of grain size distributions in pressure-assisted BaLa4Ti4O15 microstructures
  17. Influence of Mg-doping, calcium pyrophosphate impurities and cooling rate on the allotropic α↔β-tricalcium phosphate phase transformations
  18. Cellular MgAl2O4 spinels prepared by reactive sintering of emulsified suspensions
  19. Hydrothermal synthesis of boehmite in cellular alumina monoliths for catalytic and separation applications
  20. Cellular ceramics by gelatin gelcasting of emulsified suspensions with sunflower oil
  21. Extrusion of ceramic emulsions: Preparation and characterization of cellular ceramics
  22. Burnout effects on cellular ceramics obtained from gelatine gelcasted emulsified suspensions
  23. Porous hollow tubes processed by extrusion of ceramic emulsions
  24. Electrochemical behavior of the pyrochlore- and fluorite-like solid solutions in the Pr2O3–ZrO2 system. Part I
  25. Extrusion of ceramic emulsions: Plastic behavior
  26. Extrusion of ceramic pastes: An alternative approach to obtain the Benbow׳s model parameters
  27. Effect of Nb substitution for Ti on the electrical properties of Yb2Ti2O7-based oxygen ion conductors
  28. Effects of processing parameters on cellular ceramics obtained by paraffin emulsified suspensions
  29. Effects of Mn-doping on the structure and biological properties of β-tricalcium phosphate
  30. Highly conducting core–shell phase change materials for thermal regulation
  31. Solutions for Heat or Cold Discharge from Encapsulated Phase-Change Materials
  32. Cellular ceramics processed by paraffin emulsified suspensions with collagen consolidation
  33. Gelled graphite/gelatin composites for latent heat cold storage
  34. Cellular PCM/graphite composites with improved thermal and electrical response
  35. Grain boundary conductivity of heterogeneous ceria gadolinia
  36. New oxide-ion conductor Ho2(Ti1.904Ho0.096)O6.952: structure and conductivity
  37. Numerical solutions for mixed controlled solidification of phase change materials
  38. Correlation between impedance spectra of bulk ceramics and films with in-plane configuration
  39. Effects of composition and frozen-in conditions on bulk and grain boundary conductivities of Yb2Ti2O7-based materials
  40. Impedance analysis of Sr-substituted CePO4 with mixed protonic and p-type electronic conduction
  41. De-convolution of bulk and interfacial contributions based on impedance spectroscopy with external load resistance
  42. Interpretation of impedance spectra based on local minima of imaginary Z vs frequency
  43. Effects of Yb:Ti ratio on transport properties of Yb2±xTi2±xO7±δ
  44. Reducibility of Ce1−xGdxO2−δ in prospective working conditions
  45. Order–disorder phase transitions and high-temperature oxide ion conductivity of Er2+xTi2−xO7−δ (x=0, 0.096)
  46. Effects of Fe-additions on sintering and transport properties of Yb2Ti2−yFeyO7−δ
  47. Ionic and electronic conductivity of Yb2+xTi2−xO7−x/2 materials
  48. Electrical Characterization of Mullite Bodies Containing Al-Rich Anodizing Sludge
  49. Synthesis and electrical transport properties of Lu2+xTi2−xO7−x/2 oxide-ion conductors
  50. Electrical Characterization of Mullite Bodies Containing Al-Rich Anodizing Sludge
  51. Effects of firing conditions and addition of Co on bulk and grain boundary properties of CGO
  52. Kinetics of phase transformations for constant heating rate occurring close to the thermodynamic transition
  53. Synthesis and conductivity of Yb2Ti2O7 nanoceramics
  54. Predicting processing-sintering-related properties of mullite–alumina ceramic bodies based on Al-rich anodising sludge by impedance spectroscopy
  55. Synthesis and characterization of La2Mo2O9 obtained from freeze-dried precursors
  56. On the use of multichannel data acquisition of impedance spectra
  57. Electronic transport in Ce0.8Sm0.2O1.9−δ ceramics under reducing conditions
  58. Conductivity of CGO and CSO ceramics obtained from freeze-dried precursors
  59. The effect of cobalt oxide sintering aid on electronic transport in Ce0.80Gd0.20O2−δ electrolyte
  60. Behavior of strontium titanate ceramics in reducing conditions suggesting enhanced conductivity along grain contacts
  61. Microstructural effects on the electrical behaviour of SrTi0.95Nb0.05O3+δ materials on changing from reducing to oxidising conditions
  62. Oxygen stoichiometry of Sr0.97(Ti,Fe)O3−δ materials
  63. Applicability of the brick layer model to describe the grain boundary properties of strontium titanate ceramics
  64. Representations of impedance spectra of ceramics
  65. Representations of impedance spectra of ceramics
  66. An alternative representation of impedance spectra of ceramics
  67. Onset of resistive internal interfaces in SrTi0.95Nb0.05O3+δ materials on changing from reducing to oxidising conditions and on cooling
  68. Evaluation of SrTi1−yNbyO3+δ materials for gas sensors
  69. Electrical conductivity of Sr1−xTiO3−δ materialsmaterials
  70. Combined effects of A-site deficiency and dopant content on the transport properties of Nb-doped strontium titanate
  71. Evaluation of ionic transport number of CeO2 doped Y-TZP and PSZ ceramics with alumina additions