Contact

All Stories

  1. Microstructure and Mechanical Strength of Attritor-Milled and Spark Plasma Sintered Mg-4Y-3Nd Alloy

    Article • Crystals, July 2020, MDPI AG

    Robert Král

  2. Excellent superplastic properties achieved in Mg–4Y–3RE alloy in high strain rate regime

    Article • Materials Science and Engineering A, May 2020, Elsevier

    Robert Král

  3. Microstructure of the novel biomedical Mg–4Y–3Nd alloy prepared by spark plasma sintering

    Article • Journal of Alloys and Compounds, April 2020, Elsevier

    Frantisek Lukac, Robert Král

  4. Effect of flake-like powder morphology on the microstructure and texture in Mg-Al-RE alloy

    Article • Materials Letters, March 2020, Elsevier

    Frantisek Lukac, Robert Král

  5. Texture Hardening Observed in Mg–Zn–Nd Alloy Processed by Equal-Channel Angular Pressing (ECAP)

    Article • Metals, December 2019, MDPI AG

    Robert Král

  6. Peculiar serrated flow during compression of an FeAlCrMo medium-entropy alloy

    Article • Scripta Materialia, March 2019, Elsevier

    Robert Král

  7. Secondary phase precipitation and thermally stable microstructure refinement induced by ECAP on Mg-Y-Nd (WN43) alloy

    Article • Materials Letters, February 2019, Elsevier

    Robert Král

  8. Corrosion of pure magnesium and a WE43 magnesium alloy studied by advanced acoustic emission analysis

    Article • Corrosion Science, December 2018, Elsevier

    Robert Král

  9. Influence of heat treatment on corrosion resistance of Mg-Al-Zn alloy processed by severe plastic deformation

    Article • Open Engineering, November 2018, De Gruyter

    Robert Král

  10. Strength enhancement of high entropy alloy HfNbTaTiZr by severe plastic deformation

    Article • Journal of Alloys and Compounds, November 2018, Elsevier

    Robert Král, Frantisek Lukac

  11. Fe3Al Iron Aluminides Alloyed with High Concentrations of V and Cr: Their Structure and High Temperature Strength

    Article • Metallurgical and Materials Transactions A, September 2018, Springer Science + Business Media

    Robert Král

  12. Influence of Tailored Microstructure on the Corrosion Layer Stability in LAE442 Magnesium Alloy

    Article • Acta Physica Polonica A, September 2018, Institute of Physics, Polish Academy of Sciences

    Robert Král

  13. Investigation of Mechanical Properties and Microstructure of Non-Commercial Magnesium Alloy Prepared by Extrusion and ECAP

    Article • Acta Physica Polonica A, September 2018, Institute of Physics, Polish Academy of Sciences

    Robert Král

  14. Effect of secondary phase particles on thermal stability of ultra-fine grained Mg-4Y-3RE alloy prepared by equal channel angular pressing

    Article • Materials Characterization, June 2018, Elsevier

    Dr Jakub Cizek, Robert Král

  15. Structure and mechanical properties of FeAlCrV and FeAlCrMo medium-entropy alloys

    Article • Materials Science and Engineering A, June 2018, Elsevier

    Robert Král

  16. AE42 magnesium alloy prepared by spark plasma sintering

    Article • Journal of Alloys and Compounds, April 2018, Elsevier

    Robert Král, Frantisek Lukac

  17. The Effect of Nb Addition on the Microstructure and the High-Temperature Strength of Fe3Al Aluminide

    Article • Metallurgical and Materials Transactions A, February 2018, Springer Science + Business Media

    Robert Král

  18. Superplastic deformation of fine-grained AE42 and LAE442 magnesium alloys

    Article • Letters on Materials, January 2018, Institute for Metals Superplasticity Problems of RAS

    Robert Král

  19. Exceptional mechanical properties of ultra-fine grain Mg-4Y-3RE alloy processed by ECAP

    Article • Materials Science and Engineering A, December 2017, Elsevier

    Robert Král

  20. Strengthening of Fe3Al Aluminides by One or Two Solute Elements

    Article • Metallurgical and Materials Transactions A, July 2017, Springer Science + Business Media

    Robert Král

  21. Nanocrystalline aluminium particles inside Mg-4Li-4Al-2RE magnesium alloy after severe plastic deformation

    Article • Materials Characterization, May 2017, Elsevier

    Robert Král, Dr Jakub Cizek

  22. Effect of equal channel angular pressing on in vitro degradation of LAE442 magnesium alloy

    Article • Materials Science and Engineering C, April 2017, Elsevier

    Robert Král

  23. Adding Li to AE42 magnesium alloy supressed the typical texture development after ECAP.

    Article • Acta Materialia, April 2016, Elsevier

    Robert Král, Dr Jakub Cizek

  24. Modern Electron Microscopy in Physical and Life Sciences

    Article • February 2016, IntechOpen

    Robert Král

  25. Microstructure Evolution in Ultrafine-grained Magnesium Alloy AZ31 Processed by Severe Plastic Deformation

    Article • February 2016, IntechOpen

    Robert Král

  26. Microstructure characterization of LAE442 magnesium alloy processed by extrusion and ECAP

    Article • Materials Characterization, February 2016, Elsevier

    Robert Král

  27. Processing, Superplastic Properties and Friction Stir Welding of Fine-Grained AZ31, AZ91, AE42 and QE22 Magnesium Alloys

    Article • Materials Science Forum, January 2016, Trans Tech Publications

    Robert Král, Milos Janecek, Talant Ryspaev

  28. The Effect of Laves Phase (Fe,Al)2Zr on the High-Temperature Strength of Carbon-Alloyed Fe3Al Aluminide

    Article • Metallurgical and Materials Transactions A, December 2015, Springer Science + Business Media

    Robert Král

  29. Interrelation of Microstructure and Corrosion Resistance in Biodegradable Magnesium Alloys with Aluminum, Lithium and Rare Earth Additions

    Article • Acta Physica Polonica A, October 2015, Institute of Physics, Polish Academy of Sciences

    Robert Král

  30. Evolution of Corrosion Resistance in the LAE442 Magnesium Alloy Processed by ECAP

    Article • Acta Physica Polonica A, October 2015, Institute of Physics, Polish Academy of Sciences

    Robert Král

  31. Effect of Microstructure on the Corrosion Resistance of the AE42 Magnesium Alloy Processed by Rotary Swaging

    Article • Acta Physica Polonica A, October 2015, Institute of Physics, Polish Academy of Sciences

    Robert Král

  32. Evaluation of Solid-Solution Hardening of Fe-27 at. pct Al by Vanadium and Comparison to Precipitation Strengthening by Vanadium Carbides

    Article • Metallurgical and Materials Transactions A, August 2015, Springer Science + Business Media

    Robert Král

  33. Evolution of mechanical properties of LAE442 magnesium alloy processed by extrusion and ECAP

    Article • Journal of Materials Research and Technology, January 2015, Elsevier

    Robert Král

  34. Phase Structure and High-Temperature Mechanical Properties of Two-Phase Fe-25Al-xZr Alloys Compared to Three-Phase Fe-30Al-xZr Alloys

    Article • Metallurgical and Materials Transactions A, September 2013, Springer Science + Business Media

    Robert Král

  35. Effect of ECAP processing on corrosion resistance of AE21 and AE42 magnesium alloys

    Article • Applied Surface Science, September 2013, Elsevier

    Robert Král

  36. Low Temperature Plasticity of Ultrafine-Grained AE42 and AZ31 Magnesium Alloys

    Article • Advanced Engineering Materials, December 2012, Wiley

    Robert Král

  37. Annealing Effects after Various Thermo-Mechanical Treatments on Microstructure and Mechanical Properties of Wrought Magnesium Alloy ZK60

    Article • Acta Physica Polonica A, September 2012, Institute of Physics, Polish Academy of Sciences

    Robert Král

  38. Grain Refinement after Various Thermo-Mechanical Treatments in AZ80 and ZK60 Magnesium Alloys

    Article • Acta Physica Polonica A, September 2012, Institute of Physics, Polish Academy of Sciences

    Robert Král

  39. Substantially Higher Corrosion Resistance in AE42 Magnesium Alloy through Corrosion Layer Stabilization by ECAP Treatment

    Article • Acta Physica Polonica A, September 2012, Institute of Physics, Polish Academy of Sciences

    Robert Král

  40. Acoustic-Emission Study of Intermittency of Plastic Flow during Twinning and Dislocation Glide

    Article • Acta Physica Polonica A, September 2012, Institute of Physics, Polish Academy of Sciences

    Robert Král

  41. Microstructure evolution in a 2618 aluminium alloy during creep-fatigue tests

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), June 2012, Carl Hanser Verlag

    Robert Král

  42. Static Recrystallization of Cold Rolled Intermetallic Fe17Al4Cr0.3Zr Alloy

    Article • Journal of Materials Engineering and Performance, January 2012, Springer Science + Business Media

    Robert Král

  43. The effect of Zr addition on the structure and high temperature strength of Fe-30 at.% Al type alloys

    Article • Intermetallics, January 2012, Elsevier

    Robert Král

  44. Low Temperature Plasticity of an Ultrafine-Grained Al-3Mg Alloy Prepared by Accumulative Roll Bonding

    Article • Advanced Engineering Materials, November 2011, Wiley

    Robert Král

  45. Texture and microstructure evolution in ultrafine-grained AZ31 processed by EX-ECAP

    Article • Journal of Materials Science, June 2010, Springer Science + Business Media

    Robert Král

  46. Application of ultrasonic methods to determine elastic anisotropy of polycrystalline copper processed by equal-channel angular pressing

    Article • Acta Materialia, January 2010, Elsevier

    Robert Král

  47. Microstructure changes in a 2618 aluminium alloy during ageing and creep

    Article • Journal of Alloys and Compounds, November 2009, Elsevier

    Robert Král

  48. Electrochemical properties of fine-grained AZ31 magnesium alloy

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), September 2009, Carl Hanser Verlag

    Robert Král

  49. Recovery processes in magnesium alloy AX41 and AX41-12 vol.% C-fibre composite studied by dilatometry

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), March 2009, Carl Hanser Verlag

    Robert Král

  50. Annealing effects after various thermo-mechanical treatments on microstructure and mechanical properties of the wrought magnesium alloy AZ80

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), March 2009, Carl Hanser Verlag

    Robert Král

  51. Effects of prior homogenization treatments on microstructure development and mechanical properties of the extruded wrought magnesium alloy ZK60

    Article • International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde), March 2009, Carl Hanser Verlag

    Robert Král

  52. Mechanical Properties and Microstructure Development of Ultrafine-Grained Cu Processed by ECAP

    Article • Materials Science Forum, June 2008, Trans Tech Publications

    Dr Jakub Cizek, Robert Král

  53. Deformation behaviour of an AJ50 magnesium alloy at elevated temperatures

    Article • Materials Science and Engineering A, July 2007, Elsevier

    Robert Král

  54. Mechanisms of plastic deformation in AZ31 magnesium alloy investigated by acoustic emission and transmission electron microscopy

    Article • Materials Science and Engineering A, July 2007, Elsevier

    Robert Král

  55. Scanning X-ray diffraction peak profile analysis in deformed Cu-polycrystals by synchrotron radiation1This work is dedicated to Professor Dr Guenther Schoeck on the occasion of his 70th birthday.1

    Article • Acta Materialia, February 1999, Elsevier

    Robert Král

  56. Modelling of strain hardening and its relation to the onset of Portevin-Le Chatelier effect in Al-Mg alloys

    Article • Materials Science and Engineering A, August 1997, Elsevier

    Robert Král

  57. Positron Lifetimes and Doppler Broadening in Polycrystalline Titanium

    Article • Materials Science Forum, January 1997, Trans Tech Publications

    Robert Král

  58. Strain hardening and dynamic recovery during deformation of AlMg alloys

    Article • phys stat sol (a), October 1996, Wiley

    Robert Král

  59. Positron Annihilation Measurements in Zirconium at High Temperatures

    Article • Materials Science Forum, January 1996, Trans Tech Publications

    Robert Král

  60. Critical Conditions for Portevin-Le Châtelier Instabilities in Al-4.8%Mg and Al-2.57%Mg Alloys

    Article • Materials Science Forum, January 1996, Trans Tech Publications

    Robert Král

  61. Softening during Deformation of Zr Alloys

    Article • Key Engineering Materials, January 1994, Trans Tech Publications

    Robert Král

  62. Description of the Deformation Behaviour of Al-5Zn-1.2Mg Alloy

    Article • Key Engineering Materials, January 1994, Trans Tech Publications

    Robert Král

  63. Deformation twinning in Zinc-Aluminium single crystals after slip

    Article • phys stat sol (a), September 1993, Wiley

    Robert Král

  64. Mechanical properties of Zr-3Sn-1Mo-1Nb alloy at various temperatures

    Article • Journal of Materials Science, January 1993, Springer Science + Business Media

    Robert Král

  65. Solid solution hardening of zinc aluminium single crystals

    Article • phys stat sol (a), March 1992, Wiley

    Robert Král

  66. Discontinuouslow temperature deformation of ZrSn alloys

    Article • Materials Science and Engineering A, May 1991, Elsevier

    Robert Král